Hello, a few months ago I've been using the rom q FoxHound smoothly, wanted to return to the stock rom to give the phone to my brother, i flashed stock with odin but does not pass from samsung logo.
I remember that when i flashed FoxHound it came with perseus kernel, this will have something to do? becouse i flashed with odin I several times in the past and is the first time I get this!
any solution?? Greetings!
P.D: Sorry for my english!
sumuva said:
Hello, a few months ago I've been using the rom q FoxHound smoothly, wanted to return to the stock rom to give the phone to my brother, i flashed stock with odin but does not pass from samsung logo.
I remember that when i flashed FoxHound it came with perseus kernel, this will have something to do? becouse i flashed with odin I several times in the past and is the first time I get this!
any solution?? Greetings!
P.D: Sorry for my english!
Click to expand...
Click to collapse
Hi. I recommend that you change the title of this thread to something like "Problems with Flashing through Odin" as I thought your issue was with "Flash" (flash player by adobe) and it is a bit confusing.
As for your issue, No... That kernel should not have anything to do with this unless you are only trying to flash the STOCK ROM without the stock kernel. If this "perseus" kernel is NOT made to work with the stock ROM then this could be your issue.
Related
Erm..i have done some reading regarding flashing Lite'ning Rom, however there's one thing remains unclear to me....
i understand that Lite'ning Rom is rooted and rooting is not necessary when flashing, and flashing a rom that comes with a kernel will automatically change the kernel of my phone....<- correct me if im wrong
Here comes the noob question (my first android phone =p) :
Does this means i can just flash Lite'ning Rom using odin without doing anything (like flashing kernel/rooting) the moment i unbox sgs2 ?
[A Yes or No answer would be sufficient , if there's any other advice is welcome]
thank you...
Yes, just flash Lite'ning Rom and your phone is rooted and you have the Superuser along with it so you can screw up your phone, like I did several times ;-)
venomax said:
Erm..i have done some reading regarding flashing Lite'ning Rom, however there's one thing remains unclear to me....
i understand that Lite'ning Rom is rooted and rooting is not necessary when flashing, and flashing a rom that comes with a kernel will automatically change the kernel of my phone....<- correct me if im wrong
Click to expand...
Click to collapse
Correct
Here comes the noob question (my first android phone =p) :
Does this means i can just flash Lite'ning Rom using odin without doing anything (like flashing kernel/rooting) the moment i unbox sgs2 ?
[A Yes or No answer would be sufficient , if there's any other advice is welcome]
thank you...
Click to expand...
Click to collapse
Yes
venomax said:
Erm..i have done some reading regarding flashing Lite'ning Rom, however there's one thing remains unclear to me....
i understand that Lite'ning Rom is rooted and rooting is not necessary when flashing, and flashing a rom that comes with a kernel will automatically change the kernel of my phone....<- correct me if im wrong
Here comes the noob question (my first android phone =p) :
Does this means i can just flash Lite'ning Rom using odin without doing anything (like flashing kernel/rooting) the moment i unbox sgs2 ?
[A Yes or No answer would be sufficient , if there's any other advice is welcome]
thank you...
Click to expand...
Click to collapse
YES
(had this question as well sometime ago, SGS2 is my first android too.. was amazed by the ease of using custom ROM's! Btw... welcome in Android-world! )
You can flash to Lite'ning ROM 1.5 no problem. The only issue you'll notice is that when the phone boots, you'll have a yellow triangle on the boot screen. This happens when you Odin/Heimdall flash a custom kernel.
There are a couple of ways to get rid of the triangle, but the easiest is to use a jig. You can get these fairly cheaply through eBay, and it's simply a micro-USB connector with a 301Kohm resistor between two of the pins. You turn off your phone, plug this is, and bye bye triangle.
OK, I'm probably gonna sound like the biggest noob ever... but here it goes:
I never made a nandroid backup when I flashed my first rom and I have been flashing different ones since I flashed my first one. About a week ago, I flashed AOKP Milestone 5 ICS Rom. It was running PERFECT until today. I opened the Youtube app and while I was watching a video, the Tab just froze and rebooted. This resulted in a bootloop. I don't have any other roms on the internal memory and it didn't work when I tried reflashing the rom. Does anyone have any advice on how to fix this?
Again, sorry for being so stupid and thanks in advance.
Did you wipe data and dalvik cache? Other than that, you can download the stock rom from www.sammobile.com and flash it with odin.
Sent from my amazing 10.1 galaxy tab
I did wipe but I couldn't find the stock rom from the website, could you give me the direct link to the website?
Here is the link: http://www.sammobile.com/firmware/ . type P7500 and you should get a list with different regions and their latest updates.
This happened to me too. I tried flashing different ROMs as well as flashed CWM again, but only flashign a stock ROM works. Something about a damaged bln.
anushajayanti said:
Here is the link: http://www.sammobile.com/firmware/ . type P7500 and you should get a list with different regions and their latest updates.
This happened to me too. I tried flashing different ROMs as well as flashed CWM again, but only flashign a stock ROM works. Something about a damaged bln.
Click to expand...
Click to collapse
OK, I have downloaded the rom, now how do I flash it onto the device? My guess is with Odin.
1canine2 said:
OK, I have downloaded the rom, now how do I flash it onto the device? My guess is with Odin.
Click to expand...
Click to collapse
Correct. Unzip it first, so you have a .tar file. Then put it in PDA field in odin and have fun!
Sent from my amazing 10.1 galaxy tab
hi guys,
today i download the long awaited turkbey team rom v1. i did everything i read in the install instructions, so the rom did not start.
i format/clean everything, and flash again, but nothing, the only thing i see is the samsung logo ...
i flash a samsung stock rom, format/clean, flash again but nothing ...
what went wrong ??
can anybody help me please ?
thank you
austriacus said:
hi guys,
today i download the long awaited turkbey team rom v1. i did everything i read in the install instructions, so the rom did not start.
i format/clean everything, and flash again, but nothing, the only thing i see is the samsung logo ...
i flash a samsung stock rom, format/clean, flash again but nothing ...
what went wrong ??
can anybody help me please ?
thank you
Click to expand...
Click to collapse
What model do you have? international or P/G/M etc etc etc etc??
Have you tried other kernel?
Have you tried wiping/factory reset after flashing rom?
Have you checked roms thread for other people with same issue?
TheATHEiST said:
What model do you have? international or P/G/M etc etc etc etc??
Have you tried other kernel?
Have you tried wiping/factory reset after flashing rom?
Have you checked roms thread for other people with same issue?
Click to expand...
Click to collapse
my samsung is a GT - I9100 ...
before i flash the turkbey, i used rainbox v8.1 with jeboo kernel.
i flash the turkbey, see that nothing happens on start, wipe facory reset and flash again, ...
some guys had troubles too, but it seems they run the rom after flashing a second time.
now i am back on samsung stock ...
it works now
i flash a stock rom again, and change the stock kernel agains philz kernel and not like before, jeboo.
imho, rainbox rom looks nicer to me, and it runs smoother here.
in the settings menu, some text is not translated, shown in ?? turkish or so
and i miss the multi colored buttons in the status/notification bar, looks really great.
but turkbey is also a very nice rom !
thx for help
Hello everyone,
I'm pretty new to flashing rom's and kernels, recently I've tried to flash franco kernel using cwm but now my phone doesn't start up, it shows the samsung logo then it keeps showing a black screen, I've tried flashing the old kernel again through odin but it hasn't worked. Can someone please help me?
Thanks
well that kernel is base on android 4.0, off course give you bootloop
yet that developer already stop develop for s3, he only develop for nexus devices
reflash the ROM using odin
forid200 said:
Hello everyone,
I'm pretty new to flashing rom's and kernels, recently I've tried to flash franco kernel using cwm but now my phone doesn't start up, it shows the samsung logo then it keeps showing a black screen, I've tried flashing the old kernel again through odin but it hasn't worked. Can someone please help me?
Thanks
Click to expand...
Click to collapse
Franco Kernel is outdated and you shouldn`t use it since it doesn`t have the Sudden Death Fix included. For the beginning you can flash the Siyah Kernel which supports both the Jelly Bean Samsung ROMs and AOSP based ROMs (CM10.1).
Do not use outdated stuff, always look when something was updated the last time.
MsElise said:
well that kernel is base on android 4.0, off course give you bootloop
yet that developer already stop develop for s3, he only develop for nexus devices
reflash the ROM using odin
Click to expand...
Click to collapse
Thanks for the reply, I have learnt from my mistake now, I will go flash the rom again using odin.
Got it working, thanks for all your help.
recently after using sgs3 rom for 2 weeks, i came back to stock rom and then again i wont to go back to sgs3 v4.0 but when i installed that rom and rebooted my phone its getting stuck at my phone's name showing SAMSUMG GALAXY ACE GT-S5830i and i left it there for hours even though it's stuck like that i tried going back to stock rom and then tried to flash the rom but same result i tried mounting and unmounting the system but no use , please let me know a way to solve this even i tried to install mindcr 2.9 rom but same result
anyone please help me
Don't Worry
akhilkumarco007 said:
recently after using sgs3 rom for 2 weeks, i came back to stock rom and then again i wont to go back to sgs3 v4.0 but when i installed that rom and rebooted my phone its getting stuck at my phone's name showing SAMSUMG GALAXY ACE GT-S5830i and i left it there for hours even though it's stuck like that i tried going back to stock rom and then tried to flash the rom but same result i tried mounting and unmounting the system but no use , please let me know a way to solve this even i tried to install mindcr 2.9 rom but same result
anyone please help me
Click to expand...
Click to collapse
Hey Friend I can help you in SGS3 ROM by Sniper Killer see for installing his ROM,
First you got to stock ROM make it stable by using it for some hours make sure all is working properly eg. Dialler,Speaker etc
And then flash the sniper's Rom ok but if these also fails then just do these make the stock rom stable for 1 day and then at the time before flashing rom just root your phone and then flash the rom it will 1000% work because the same problem was facing for me too :good:
Hitesh2626 said:
Hey Friend I can help you in SGS3 ROM by Sniper Killer see for installing his ROM,
First you got to stock ROM make it stable by using it for some hours make sure all is working properly eg. Dialler,Speaker etc
And then flash the sniper's Rom ok but if these also fails then just do these make the stock rom stable for 1 day and then at the time before flashing rom just root your phone and then flash the rom it will 1000% work because the same problem was facing for me too :good:
Click to expand...
Click to collapse
actually i installed that sgs3 yesterday so i finally installed stock yesterday itself and rooted it and used it till today afternoon then again i tried the above process but same result yar so i decided to post for help however thanx for your reply buddy
but now when i installed mindcr 2.8 its working but the problem is with sgs3 i guess
akhilkumarco007 said:
actually i installed that sgs3 yesterday so i finally installed stock yesterday itself and rooted it and used it till today afternoon then again i tried the above process but same result yar so i decided to post for help however thanx for your reply buddy
Click to expand...
Click to collapse
Your welcome dude but for sgs3 v5 spend some more time on stock it will sure work :good: some time the stock rom doesn't get stable that's why these things happens
Hitesh2626 said:
Your welcome dude but spend some more time on stock it will sure work :good: some time the stock rom doesn't get stable that's why these things happens
Click to expand...
Click to collapse
will try your advice and use for long time and try it again