Hi
Vodafone NZ has released Samsung Galaxy S2 but i am not able to find anywhere what their firmware version is. Since i am in NZ i was hoping maybe their CSC and radio would be better .
Anyone has any ideas on how to find it or get it.
@SamFirmware .. any help ..
Thanks
EDIT
-----
found the version infor
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100VNZKE4
Build Info: Wed May 1 16:08:22 KST 2011
I have purchased a new SIII for my wife but it has a Vodafone-modified/branded ROM on it. I have been trying to figure out which ROM I should use to get a non-branded stock ROM on the SIII (like I did for my SII), but I get lost in the alphabet soup. Which stock ROM can I use here in Australia?
The phone currently report (when doing *#1234#):
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
neoculture23 said:
I have purchased a new SIII for my wife but it has a Vodafone-modified/branded ROM on it. I have been trying to figure out which ROM I should use to get a non-branded stock ROM on the SIII (like I did for my SII), but I get lost in the alphabet soup. Which stock ROM can I use here in Australia?
The phone currently report (when doing *#1234#):
AP: I9300TDUALE6
CP: I9300TDULE6
CSC: I9300TVAUALE6
"About Device" reports:
Model Number: GT-i9300T
Android version: 4.0.4
Baseband version: I9300TDULE6
Kernel version: 3.0.15-CL554509-user
[email protected]#1
SMP PREEMPT Sun May 13 11:52:35 KST 2012
Build number: IMM76D.I9300TDUALE6
Click to expand...
Click to collapse
omega rom is the best so far... make sure you root the phone first but..
rizky77 said:
omega rom is the best so far... make sure you root the phone first but..
Click to expand...
Click to collapse
I looked through samfirmware.com but could not see a ROM tagged as "Omega". Am I looking in the wrong place?
And I'm pretty certain I have rooted her phone already... well, I went though the motion and SU is installed... but the proof will be when I try to flash an entire ROM, of course.
You will find the Omega from here in our development section for the S3.
http://forum.xda-developers.com/forumdisplay.php?f=1566
Tapped That
Hello Seniors,
I am new here so greetings! I am new to the Android world so need help on some basic things.
I have this Samsung Galaxy S2 GT-i9100 bought from Saudi Arabia and the OS was ICS 4.0.3 XXLPW. I flashed it to ICS 4.0.4 XWLPW lately with Odin and it works fine.
Model: GT i9100
ICS 4.0.4
Baseband: i9100DDLPB
Kernel V: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Wed Aug 22 22:55:24 KST 2012
Build N: IMM76D.XWLPW
Now I am all into rooting my phone (first attempt and newbie) and I got two good threads that describes the procedure for my exact Android Version.
Question, first link says I have to Factory Unlock my phone the other one is not even mentioning it, what is Factory Unlocking my S2? How to do it? Or how to check if I am already factory unlocked?
After buying and using my S2 from Saudi Arabia I had been on vacation in India where I normally used Vodafone India SIM too, without any hassles or notifications........IF THAT'S ALL WHAT BEING FACTORY UNLOCKED IS UP TO!?
Appreciate some good tips.
Thanks.
Today I get a message on my screen that there was a new update. I clicked install and the phone turned off and installed the update with the little android man on the screen. When it was finished (about 5-7 minutes) the phone booted back up.
The phone is running much faster and smother but the android version is still 4.1.1 ????
Anyone know what this update was for. I can't find any update log to see what was done to the phone.
This might be wrong, but i heard there was a small update to give true 64gb microcd support, that is being rolled out.
John.
jetpack101 said:
Today I get a message on my screen that there was a new update. I clicked install and the phone turned off and installed the update with the little android man on the screen. When it was finished (about 5-7 minutes) the phone booted back up.
The phone is running much faster and smother but the android version is still 4.1.1 ????
Anyone know what this update was for. I can't find any update log to see what was done to the phone.
Click to expand...
Click to collapse
shouldn't your phone be on XXDLJ4(BTU) now?
Squall-Leonhart said:
shouldn't your phone be on XXDLJ4(BTU) now?
Click to expand...
Click to collapse
Its showing
Baseband Version: I9300XXDLID
Build Number: JRO03C.I9300XXDLK1
can you check your CSC?
There was an update for Indian S III firmwares today, and it is 4.1.1.
Don't worry about it.
Simonetti2011 said:
There was an update for Indian S III firmwares today, and it is 4.1.1.
Don't worry about it.
Click to expand...
Click to collapse
except, Op is in Ireland. so I'm kind of interested in whether i might see an update to this build (from XXDLJ4) on my BTU S3
jetpack101 said:
Its showing
Baseband Version: I9300XXDLID
Build Number: JRO03C.I9300XXDLK1
Click to expand...
Click to collapse
LK1 was the new firmware released for India. But the baseband varies, though...
http://forum.xda-developers.com/showthread.php?t=2005286
How did an Irish phone get this update!?
looks like this is how
PDA: I9300XXDLK1
CSC: I9300ODDDLI7
Version: 4.1.1
Date: 2012-11-12
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
jetpack101 said:
Its showing
Baseband Version: I9300XXDLID
Build Number: JRO03C.I9300XXDLK1
Click to expand...
Click to collapse
My build number: DLJ4 dated 19 Oct 2012
thats because you're on a BTU / KOR firmware.
OP is probably on one of the branded firmwares that just got XXDLK1
diference in Europa Baseband Version
I see a diference from country to country i Europa Baseband Version:
I Update with OTA
Mobile: Samsung Galaxy S3
Model No: GT-I9300
Android Version: 4.1.1
Baseband Version: I9300BUDLI2 <-----> My Location: Spain Vodafone
member jetpack101:
Basehand Version: I9300XXDLID <-----> Location: Dublin
Kernel Version: 3.0.31-256827 / [email protected] #1 / SMP PREEMPT Fri Sep 28 20:44:37 KST 2012
Build Number: JRO03C.I9300XXDLIH
P.D. therefore Squall-Leonhart isn't ok when he say... Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom is equal.
well good for you
I am trying to do a complete reset on my phone to get ready to go to a service center. However I am unable to find a completely stock UK version of 4.04, 4.1.2 or 4.3. I have tried everywhere but even though it says UK BTU ( my phone was unlocked from day one ) I have so far had Dutch, German, Swiss and even a Chilean rom.
Could some one please point me to one please.
Hey there mate, Think this is what your looking for. 4.3 BTU UK
Model: GT-I9300
Model name: GALAXY S III
Country: United Kingdom
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 12:07:41 +0000
Product Code: BTU
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6
http://dl.sammobile.com/PVFaQ1krLD0...lNBWkFFWQ../I9300XXUGMK6_I9300OXAGMK6_BTU.zip