Hi i just got a samsung galaxy s3 i9300 international version and i live in the north east of england i updated my phone to jelly bean through kies and i now notice i have Baseband version i9300XXDLID which i find very bad sometimes my apps which require mobile data take ages to start, jelly bean has been on for approx 2 weeks now so it should have settled down,can anyone tell me of a better modem to install,thanks for your time.
The carrier for this phone is O2
Modem thread in basic sticky faq and guides .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Hi thanks for the link, what i really wanted to know was is anyone else in NE england having the same problem with very very slow mobile data after jelly bean update as im arguing with phones4u that they should put this problem right i think it has put a bad baseband modem on my phone the fact that im arguing with phones4u is my mobile is only just over a month old,and my mobile data is almost non existent,i suspect i will have to flash another modem myself my phone specs are as follows thanks in advance for all your help:
Device: Samsung Galaxy SIII GT-I9300 (unbranded, unlocked, SIM-Free)
Country: United Kingdom
Android Version: 4.1.1
PDA: I9300XXDLJ4
CSC: I9300OXADLJ4
MODEM: I9300XXDLID
Kernel Version: 3.0.31-368423 / [email protected] #1 / SMP PREEMPT Fri Oct 19 18:17:48 KST 2012
Build Number: JRO03C.I9300XXDLJ4
Build Date: Oct. 19, 2012
Today I get a message on my screen that there was a new update. I clicked install and the phone turned off and installed the update with the little android man on the screen. When it was finished (about 5-7 minutes) the phone booted back up.
The phone is running much faster and smother but the android version is still 4.1.1 ????
Anyone know what this update was for. I can't find any update log to see what was done to the phone.
This might be wrong, but i heard there was a small update to give true 64gb microcd support, that is being rolled out.
John.
jetpack101 said:
Today I get a message on my screen that there was a new update. I clicked install and the phone turned off and installed the update with the little android man on the screen. When it was finished (about 5-7 minutes) the phone booted back up.
The phone is running much faster and smother but the android version is still 4.1.1 ????
Anyone know what this update was for. I can't find any update log to see what was done to the phone.
Click to expand...
Click to collapse
shouldn't your phone be on XXDLJ4(BTU) now?
Squall-Leonhart said:
shouldn't your phone be on XXDLJ4(BTU) now?
Click to expand...
Click to collapse
Its showing
Baseband Version: I9300XXDLID
Build Number: JRO03C.I9300XXDLK1
can you check your CSC?
There was an update for Indian S III firmwares today, and it is 4.1.1.
Don't worry about it.
Simonetti2011 said:
There was an update for Indian S III firmwares today, and it is 4.1.1.
Don't worry about it.
Click to expand...
Click to collapse
except, Op is in Ireland. so I'm kind of interested in whether i might see an update to this build (from XXDLJ4) on my BTU S3
jetpack101 said:
Its showing
Baseband Version: I9300XXDLID
Build Number: JRO03C.I9300XXDLK1
Click to expand...
Click to collapse
LK1 was the new firmware released for India. But the baseband varies, though...
http://forum.xda-developers.com/showthread.php?t=2005286
How did an Irish phone get this update!?
looks like this is how
PDA: I9300XXDLK1
CSC: I9300ODDDLI7
Version: 4.1.1
Date: 2012-11-12
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
jetpack101 said:
Its showing
Baseband Version: I9300XXDLID
Build Number: JRO03C.I9300XXDLK1
Click to expand...
Click to collapse
My build number: DLJ4 dated 19 Oct 2012
thats because you're on a BTU / KOR firmware.
OP is probably on one of the branded firmwares that just got XXDLK1
diference in Europa Baseband Version
I see a diference from country to country i Europa Baseband Version:
I Update with OTA
Mobile: Samsung Galaxy S3
Model No: GT-I9300
Android Version: 4.1.1
Baseband Version: I9300BUDLI2 <-----> My Location: Spain Vodafone
member jetpack101:
Basehand Version: I9300XXDLID <-----> Location: Dublin
Kernel Version: 3.0.31-256827 / [email protected] #1 / SMP PREEMPT Fri Sep 28 20:44:37 KST 2012
Build Number: JRO03C.I9300XXDLIH
P.D. therefore Squall-Leonhart isn't ok when he say... Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom is equal.
well good for you
Can anyone provide me with the torrent for the following firmware. I tried several times to download from Hotfile but it disconnects after a while. Please its urgent, I need to reflash to stock room before I give my phone to samsung service center.
I9300XXEMC2
Base Firmware: I9300XXEMC2 (4.1.2)
Region: Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 11 March 2013
Modem: XXEMC2
CSC: OXAEMC2
I'm pretty sure the stock firmware collection thread has a torrent somewhere in it. Search. You will find a link.
I searched for a solution on this site but none completely solve my problem, I swear.
Hi guys, this is my first thread.
I have a S3-GTI9300, i'm from Argentina.
Model: GT-I9300
Model name: GALAXY S III
Country: Argentina
Version: Android 4.1.2
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: ARO
PDA: I9300UBEMA1
CSC: I9300UVOELL1
MODEM: I9300UBELL1
I have reset the counters with triangle away and unrooted with odin.
I want to upgrade to 4.3, but kies show "THIS IS THE LATEST FIRMWARE" and when i press "Software Upgrade" in wi fi mode (OTA), nothing happens.
why is this happening and how I can fix it?
THANKS IN ADVANCE.
sandunga (Javier)
sandunga said:
I searched for a solution on this site but none completely solve my problem, I swear.
Hi guys, this is my first thread.
I have a S3-GTI9300, i'm from Argentina.
Model: GT-I9300
Model name: GALAXY S III
Country: Argentina
Version: Android 4.1.2
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: ARO
PDA: I9300UBEMA1
CSC: I9300UVOELL1
MODEM: I9300UBELL1
I have reset the counters with triangle away and unrooted with odin.
I want to upgrade to 4.3, but kies show "THIS IS THE LATEST FIRMWARE" and when i press "Software Upgrade" in wi fi mode (OTA), nothing happens.
why is this happening and how I can fix it?
THANKS IN ADVANCE.
sandunga (Javier)
Click to expand...
Click to collapse
Kies sucks and updating via OTA is worse. Use Odin.
http://nasirtech.blogspot.com/2014/01/new-i9300ubugml1-43-jb-stock-rom-for.html
It'd be a good idea to factory reset while you're at it. Not doing so will probably work, but much more inclined to have issues.
Hello there,
I own a Samsung S4 Mini I9190 unbranded from United Arab Emirates, using Android JellyBean 4.2.2.
AP: I9190XXUBNA1
CP: I9190XXUBNA1
CSC: I9190OJVBNA1
I am unable to make the KitKat 4.4.2 update since apparently it is not available for such region. However, I came across this article on the web:
update-galaxy-s4-mini-i9190-xxucng1-android-442-firmware from Team Android (sorry I'm not able to post links yet)
The author claims any unbranded I9190, regardless the region, should be able to perform the manual update to KitKat using the firmware provided:
Model: GT-I9190
Model name: GALAXY S4 mini
Country: Russia
Version: Android 4.4.2
Changelist: 1995154
Build date: Thu, 03 Jul 2014 03:51:09 +0000
Product Code: SER
PDA: I9190XXUCNG1
CSC: I9190SERCNG1
MODEM: I9190XXUCNG1
Is it safe to try it out? I have already backed up everything.
Is there anything I should know about? I don't feel that comfortable with using an update intended for a different firmware.
Thanks a lot for your time.
Regards,
hemp_invader