Related
Hi guys i bought a bsnl tpad IS703C model tablet and i would like to know about how to root my device ? Does anybody have custom ROM for the device? somebody please help me !!
Thanks in advance !! :good:
Model: IS703C
OS :ICS 4.0.3
Kernel :3.0.8
Try zroot app..
Sent from my Micromax A60 using xda premium
akash akya said:
Try zroot app..
Sent from my Micromax A60 using xda premium
Click to expand...
Click to collapse
sorry it doesnt work i tried both permanent and temprory root it shows acquiring root shells aftr a while it comes out f d a application to menu !!
any other methods ??
Use Unlock Root Software from pc [http://www.unlockroot.com/]
And Super one click 2.3 also works fine
sidcooldude said:
sorry it doesnt work i tried both permanent and temprory root it shows acquiring root shells aftr a while it comes out f d a application to menu !!
any other methods ??
Click to expand...
Click to collapse
Have you root ur device...coz i want to root mine also?? kindly help me
Custom rom updates
sidcooldude said:
Hi guys i bought a bsnl tpad IS703C model tablet and i would like to know about how to root my device ? Does anybody have custom ROM for the device? somebody please help me !!
Thanks in advance !! :good:
Model: IS703C
OS :ICS 4.0.3
Kernel :3.0.8
Click to expand...
Click to collapse
Hello Guys,
Tablet can be rooted through Unlockroot or super one click .
After successful root , you can try to install CWM for ICS 4.0.3 .
After installing take an backup of stock rom , if in future your phone get crash you can restore it .
After backup try different roms as available .
Note :- Please try at your own risk if anything went wrong dont blame me .
Pls
I really want to root my penta is703c so pls some1 pls tell me i am looking for a long while but i am not getting it i used superoneclick and unlockroot also but non work
i want to install jelly bean on it after rooting so if possible so pls guide me to root and installing a stable custom rom on my penta is703c tab i would really appreciate efforts:good :good:
Reinstalling ICS after rooting ?
My device has a custom ICS designed from my local operator.
i want to change to another ICS...
I want to know.. if i root my tablet orange penta IS703c.. Must i re install OS 4.0.4?
Successfully flashed BSNL Penta is703C
The flashing procedure is written below use flash tool supplied with stock firmware, To download stock firmware Use below link
pantel.in/Download/Software/IS703C1GB.zip
Procedure To Flash:-
Install ADB Drivers Using PDANET Software.
Make sure the tablet is off.
Remove the external SD card.
Plug in the tablet using the Mini USB port.
Copy Vortex.pak to the folder that has the flash tool. The .pak and .ini files should be in the same folder.
Start the Flash tool.
this part needs four or five hands. Use a pen to hold in the Reset button at the SAME time hold in the POWER button and the MENU button.
Release the RESET button after about five seconds. Keep the Power and Menu buttons pressed until you get New Hardware found and a new empty VDFu window pops up.
Release the Power and Menu buttons.
Start the flash tool. Menus are in Chinese.
Click the Lower Right button. The progress bar should fill in about 30%. If there are any error windows, just click the button the window.
The new blank VDFu window will close.
Important. DO NOT CLOSE the flash tlool.
Do the five hands step again to get the blank VDFu window.
The left radio button will be active. Select it.
Click the lower button on the right.
Several small windows will pop up. Just click the button in the windows to close them.
This process takes several minutes to complete. Do not interrupt the process. Do not close the flash tool.
The Progess bar will fill. Cllose the the flash tool.
Unplug the USB cable.
Press and hold the Reset button for 5 seconds.
Turn on the tablet.
You should see a firmware update take place.
I am still trying ato find a way to Install CWM on this tablet, Any Help from seniors would be highly appreciated.
try it
SeSearch for rooting is791c in xda .. and follo the steps.. I already rooted my is703c .. n its working gud... bt luking for a custom rom
Works with an ADB tweak
Pantel's BSNL Penta IS703C has weird path variable. the su present in /bin/ takes precedence. That file is merely a symlink to /bin/busybox. Rooting solutions don't affect it and therefore rooting this tablet from existing rooting solutions does not work.
Following method works for this tablet:
Follow all steps of any rooting solution, I chose root with restore by bin4ry with option 1
Enter ADB shell (root with restore by bin4ry folder contains adb.exe, use it by Windows cmd prompt)
Code:
adb shell
mv /bin/su /bin/su1
Done!
Tab not booting
prescript said:
Pantel's BSNL Penta IS703C has weird path variable. the su present in /bin/ takes precedence. That file is merely a symlink to /bin/busybox. Rooting solutions don't affect it and therefore rooting this tablet from existing rooting solutions does not work.
Following method works for this tablet:
Follow all steps of any rooting solution, I chose root with restore by bin4ry with option 1
Enter ADB shell (root with restore by bin4ry folder contains adb.exe, use it by Windows cmd prompt)
Code:
adb shell
mv /bin/su /bin/su1
Done!
Click to expand...
Click to collapse
Good one, was having problems with rooting after firmware upgrade. but as of now, My tab is not booting up, display seems having lighted but nothing shows. Anybody having any experience??
Firmware upgrade?
Ranaboys said:
was having problems with rooting after firmware upgrade. but as of now, My tab is not booting up, display seems having lighted but nothing shows. Anybody having any experience??
Click to expand...
Click to collapse
Where did you get an upgraded firmware from? I know of only two official firmwares.
20120910%20IS703C%20software.zip (new)
and
IS703C1GB.zip (old)
(Here is my opinion about these two firmwares:
New
Pros: Obviously, it is new. Offers more apps. Physical buttons work as volume keys. Taskbar has hide option.
Cons: Wallpaper says that P. C. Chacko has gifted tablet to some scholar. /system/media/boot.mp3 plays annoying audio at startup. Taskbar has screenshot button. Stock Skype app is by tom.com.
Fix: Remove wallpaper. Rename boot.mp3 from ADB/root. Install official Skype app.
Old
Pros: Physical buttons work as menu and back keys.
Cons: Older version. Less apps.)
I have tried both firmwares and both work fine. Did you try some firmware for some other tablet? If so, then you'll have to flash any original firmware back.
Actually I tried installing CWM of a fly tablet but it didnt worked so reflashed stock firmware. But after some timme my tab refused to boot. still looking for a solution.
Try this
Ranaboys said:
Actually I tried installing CWM of a fly tablet but it didnt worked so reflashed stock firmware. But after some timme my tab refused to boot. still looking for a solution.
Click to expand...
Click to collapse
If your tablet is still detected by ADB, then you might be able to reflash the stock firmware again. I don't know if any JTAG sort of fixes are provided by Pantel service center. I suggest you ask them, no harm in asking.
prescript said:
If your tablet is still detected by ADB, then you might be able to reflash the stock firmware again. I don't know if any JTAG sort of fixes are provided by Pantel service center. I suggest you ask them, no harm in asking.
Click to expand...
Click to collapse
Yes it is detected by adb , I have tried installing firmware again, But still the backlight of display gets on but nothing else work. And I dont know much about JTAG, will take it to Care centre in spare time. I havent used this tab since I bought it, But recently I lost my phone, so used it for whatsapp....only
Try newer firmware
Ranaboys said:
Yes it is detected by adb , I have tried installing firmware again, But still the backlight of display gets on but nothing else work. And I dont know much about JTAG, will take it to Care centre in spare time. I havent used this tab since I bought it, But recently I lost my phone, so used it for whatsapp....only
Click to expand...
Click to collapse
Since it is detected by ADB, I wouldn't be much worried.
I see that you earlier tried pantel.in/Download/Software/IS703C1GB.zip. Have you ever tried pantel.in/Download/Software/20120910 IS703C software.zip instead? It is the newer firmware from Pantel.
Tried both firmwares
prescript said:
Since it is detected by ADB, I wouldn't be much worried.
I see that you earlier tried pantel.in/Download/Software/IS703C1GB.zip. Have you ever tried pantel.in/Download/Software/20120910 IS703C software.zip instead? It is the newer firmware from Pantel.
Click to expand...
Click to collapse
Actually I have both versoins of these firmwares and tried flashing both but no luck. And other options?
Ranaboys said:
Actually I have both versoins of these firmwares and tried flashing both but no luck. And other options?
Click to expand...
Click to collapse
Did the firmware upgrade complete (shows a popup and the progress bar becomes full blue)? Else try to wipe /cache (boot-> keep menu button pressed -> Enters recovery -> Wipe cache).
root is703c
bro use below link... i already rooted me is703c..... just follow steps.. a2chly its for 1s701c bt works for 1s703c
http://forum.xda-developers.com/showthread.php?t=1969766 :laugh: :laugh:
Hi to all!
I recently bought this phone, I have to admit to being fully satisfied of the features except for one ... the GPS function.
I have read dozens of guides to adjust the GPS W8+ but not for my model. If I knew how to do the root I could at least try to use the same method.
Does anyone have suggestions on how to do it on this phone?
THL W8 Beyond
Hello, i have also bought a thl w8 beyond and i have the same questions, if anyone could help id be very apreciated!! Thanks
Root
hi,
Motochoper root hack fail on W8 beyond.
THL W8 Beyond:Recovery,Root máy
birdyisme said:
hi,
Motochoper root hack fail on W8 beyond.
Click to expand...
Click to collapse
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Thanks thienhoa
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
thienhoa said:
I'am Thienhoa3 in Tinhte.vn
Topic install recovery and root THL W8 Beyond MT6589t
Seach google THL W8 Beyond root,recovery tinhte.vn
link: tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/#post-38561380
Click to expand...
Click to collapse
So I got mine W8 beyond two days ago.
So far so good, but:
1. GPS problem. I am geocacher (more at: geocaching.com) and I need accurate GPS. When I stood still in the open for few minutes, I could see GPS jumping around for 400-900 meters for no reason. AGPS and EPO activated. We will see how it goes
2. I would love to get polish language settings, since there are some apps which fetch the content depending on Your language setting (I know that this is poor design, but this is how they works), so that would be nice. Not an issue anymore. I installed MoreLocale2 and pm'ed it which is more than enough at the moment.
3. I do not see option for sorting the apps in the main apps menu (it was working on my old Lenovo A750) - am I missing something?First 9 icons are fixed and alphabelical, the rest is just alphabetical. I can live with that.
4. I have my contacts stored with country prefix which is not used by my operator. I do not see my contacts data when they are calling me.
The SMSes are provided by operator with country prefix, so the problem is with calls only. I tried to follow this thread http://forum.xda-developers.com/showthread.php?t=2268120 but I am unable to decompile framework.jar - no classes.dex inside. I am not able to deodex framework.odex either, so I am stuck for the moment.GravityMod2 3.0 ROM fixed that problem.
The link provided with the tools and howto contains W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img,
when I go to phone info at my phone I can see W8_beyond.JB2.FHD.EN.COM8P128_MT6589TV1.0.2_20130626.
Seems like I have newer firmware. If anyone can tell me how to extract this, I would be more than happy to share.
GravityMod2 3.0 installed - not an issue anymore
For my good old Lenovo I was able to modify the ROM as soon as I got my hands on any ROM in zip format. I guess I could also try to compile something (I am a programmer), but since I am extremely low on time I would need MT6589T kernel patch (is it the same like mt6589) and some basic manual.
Anyone interested?
Fix GPS
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
thienhoa said:
Topic fix GPS on Mediatek
diendan.mobiistar.vn/index.php?posts/104048[/url]
Click to expand...
Click to collapse
Thanks, but I got A-GPS and EPO already enabled and EPO downloaded.
I till try to go to the engineering menu and locking via YGPS.
As I understood from google translator, I should just wait for lock and then close everything. Since then everything should be running smoothly. Am I right?
What about my other questions? Lack of polish is driving my crazy. My news feeds are all US which is driving me crazy ...
w8 beyond dead
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
ilmeccanico said:
Guys ..... HELP!!!!
with my habit of fiddling I think I brick the cell.
I tried the guide for root and recovery for the beyond, but now I can not turn on anymore, not even in recovery mode, the LED does not light up even if I put it on charge.
Can anyone give me some advice on where I can start to revive the terminal?
Thanks in advance. :crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Low_Man said:
I am not sure if it helps (I am quite sure it does not acctually), but which version was running on your phone prior to root attempt? Which part has failed? writting the CWM image or rooting?
Try to connect the phone to the PC via usb and then turning it on. If PC reacts (ADB device as far as I rememeber will be recognized) then there might be chance for You.
Click to expand...
Click to collapse
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
ilmeccanico said:
When work was mounted W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
I followed this guide
h**p://***.tinhte.vn/threads/thl-w8-beyond-recovery-root-may.2132474/ # post-38561380
in the end I also showed the window of ok with the green circle but by that time you are no longer on again.
if I connect it to the PC you will hear the sound that is connected but nothing happens
Click to expand...
Click to collapse
Have You tried reflashing it again with this: ovh.to/GrW17MP?
yes i tried it
Does the GPS works fine on this phone? i would like ot buy this phone....
SICOPOLY said:
Does the GPS works fine on this phone? i would like ot buy this phone....
Click to expand...
Click to collapse
Mine work - kind of ...
After getting the fix the coordinates jumps for 1-2 second every 5 seconds.
This makes it troublesome but possible for navigation
what SAR rating for thl w8 beyond?
Anyone knows how can you root the latest 1.0.2 w8 beyond version?
Getting "Incorrect scatter file format" error
birdyisme said:
Hi thienhoa,
Thanks for this tutorial.
With the help of C3C076 (thanks for the recovery image) , I proceed in the same way.
This archive contains all the necessary and also a howto.
link: ovh.to/GrW17MP
Click to expand...
Click to collapse
Hi,
Thanks for this great tutorial and for arranging all the needed files in one location!
I have a small problem
1. When I open the flash tool I get the following error: "fail to load a raw data file: "c:\users\stephane\Desktop\thl8beyond\W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618-cwm6033.img
2. When I continue the falsh tool opens but when I try to upload the scatter file I get the following error: "Incorrect scatter file format!"
3. My current build number is: W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.2_20130626. Can I still use the image you provided ?
Thanks a lot in advance!
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
lepsulet said:
Hi guys,
I am having trouble to install the drivers for the THL W8 Beyond that I have. My model is:
W8_beyond.JB2.FHD.EN.COM.8P128_MT6589TV1.0.1_20130618
When connecting it to the computer it will install HTC drivers under Android Phone entry in device manager and also W8 Beyond under Portable Device.
I cannot root the phone using the msdos script or SP Flash tool. Also Snapea does not see the device. On the same computer I used a ZOPO C2 Platinum and Snapea found that instantly and I could rooted and also pushed a custom ROM.
Now... wish I could also root this THL to be able to back-up my stock ROM. No need for me to work with a custom, just need to be able to back-up the original ROM just to be safe.
Can you please help me in regards to the communication problem between computer with Win 7 64bit and the THL W8 Beyond phone?
Thank you.
Click to expand...
Click to collapse
The easiest and only way i could root my W8 beyond is with this program:
droidchina.com/forum/Thread-ROOT-GUI-Root-Wizard-for-MTK65xx-phones
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Hello,
I have the same model, and been looking for root.
Thanks.
MS!
prestigio 8.0 hd root (JB 4.2.1)
copy this file to sd card go to recovery and install
New firmware
New firmware available for our tablet:
PMP5588C_20140102_v1.0.42:
http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5588C/PMP5588C_20140102_v1.0.42.zip
1. New preinstalled applications
2. User agent profile for Android browser updated
3. APN/SPN files updated
4. Skype issue fixed
5. Video player issue fixed
6. Chrome browser bugs fixed
7. Sound Recorder issue fixed
8. Wi-Fi bugs fixed
9. Gallery issue fixed
10. System stability and speed improved
11. Other minor issues fixed
verification
Hello friends, i have problem with verification of modified or created own firmware on my PMP5588c duo, during instaling of this update from recovery, boot loader delet this instalation and displayes " validating error" Is possible break this validation? modified or choose other bootloader? sorry for multiple question. thanks for help David
Prestigio 5588c Rooting Issue
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Root for PMP5588c_Duo
AzahTabor said:
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Click to expand...
Click to collapse
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Zapryanov said:
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Click to expand...
Click to collapse
hey Z.
thank you for the guidance.. testing it now so will update shortly.. although the program thought I had a samsung note lol
ok, this is an update.. seems the program did not want to root my tablet. when I started it again, it classed it as a google device, but said connection failed due to cable instability.. guess I will have to try another way
double update... after leaving it for a few days, it seems to have wanted to work.. woohoo. thanks Z for the info
help with prestigio multipad 8.0 HD !!!
Welcome. I have a problem with this tablet.
Tablet died after a crash. There is no option to enter a Power + vol +
also does not move with the micro SD card from the system manufacturer Charges start-up screen and that's it. When connected to a PC saw it as m3-chip.
In total, I found drivers in Device Manager I did update the driver for the M3-chip and now the tablet is listed in my device manager as libusb- win 32 device. I found a program that detects such a connected tablet. The program is Amlogic Image Burning Tool v.1.6.2.2. For the time being this my progress stopped. I was trying to upload with this software firmware downloaded from the manufacturer's website dedicated for this device, but I get the message "find no upgrade" and do not know what to do. Can someone help me ??? I'm not an expert, and the above step I got reading the various forums. To my eye it looks as if they fell bootloader, but thanks to the above program to see the tablet (or rather its processor) and now combines where to download a bootloader to throw it out there and then be able to upload the system such as the sd card. Or is there some other program or a way to restore the dead to life my tablet ??? Can you help ???
1. Turn off the tablet (hold the power button and count to 12
2. Insert prepared SD card https://yadi.sk/d/_6VITNSbhKPyi
3. Press and hold the "Vol +", press "Power ON" for 2 sec.
4. Release all buttons and wait for boot TWRP (about 10 seconds)
5. In TWRP select Install -> update.zip
6. Reboot tablet
testatura said:
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Click to expand...
Click to collapse
Sorry Dude but it doesnt work ..... while updating abort... i tryed with all known firmware from the company ... kingoRoot KingRoot and also OneKlickRoot doesn´t work too. I´m Sad about that...
regards Michael
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and
[ISSUE HAS BEEN SOLVED! - Download and use "ROOT Genius" to root this particular brand of tablet. I have personally tested it and can confirm it works on Firmware revisions: v1.0.07 and v1.0.9! Thanks to "brugos" for finding the fix and bringing it to my attention!]
Hey guys
I do hope I have posted this question in the correct forum, if not I do apologise.
As you can probably tell from the title, I am looking for a way to root my 9.7 inch Prestigio MultiPad 4 Quantum 9.7 tablet (Model: PMP5297C_QUAD).
I have been looking for a way to root this since December, and even though I have found several articles (non English) explaining how to root this device (and have been through all the relevant threads I could find regarding my device on XDA), all of the guides have been for firmware v1.0.3 - my tablet is v1.0.7. I went ahead and tried it anyway, and although CWM installed and launched fine, installing the SuperSU binary via CWM did nothing. It installs, but nothing appears in Android when I reboot, and installing SuperSU from Play Store alerts me that the SuperSU binaries are not installed.
I tried "Kingo Android ROOT" and that wouldn't even detect the device, which isn't surprising as it isn't listed on their website. However somebody on a similar thread (on XDA) suggested that the OP (who has the same tablet as myself) at least try it. I did try it, and sadly it doesn't work.
Device information:
Prestigio MultiPad 4 Quantum 9.7" Tablet
Model Number: PMP5297C_QUAD
Firmware: v1.0.7 (December 2013)
FW Build Number: PMP5297C_QUAD_20131204_V1.0.7
Android Version: 4.2.2
If there is anybody out there who has any idea what to try, then I am willing to listen. If anybody needs any other information, I am more than willing to give it
Cheers guys
Prestigio multipad 4 quantum 9.7
The same here..trying to find a way to root for the new firmware...still haven't got anything...
Yeah... doesn't seem to be a very popular brand of tablet :/ Which is a shame as its pretty damn snappy with the v1.0.7 firmware. I wanna get a resolution changer to work, but none I have tried will work without rooting. Only wanna drop the res for better gaming framerates lol
yeah agree...doesn't seem very popular... I guess we should wait some time more.... did you try rooting with the old firmware and then updating to the new firmware? I guess it wouldn't work anyway....
Nope... from past experience rooting phones updating the firmware breaks the root as v1.0.7 replaced the entire OS if I remember...
Tried the root for v1.0.3 while using v1.0.7... ClockWorkMod installed and works fine, but the SuperSU binary doesn't work/install It was a gamble incase it screwed anything up but luckily it didn't - however, it also didn't work
And yeah, looks like we will need to wait a while longer... I do hope someone out there somewhere knows what to do lol Just gotta find them or wait for them to find us lol
Hey dude...you still haven't find root? If not try with root genious... I got root now on my tablet...running the latest firmware 1.0.9
Regards!
Ah man! You are AMAZING! lol
I almost gave up trying to find a root - until now!
I had no idea that there was a new FW released a few weeks back, just updated it and downloaded "ROOT Genius" - worked first time!
Excellent work there dude, thank you so much and thank you for taking the time to share it with me, and the rest of the people out there who have been in the same situation as us who are still looking for a fix!
Now we have it! Excellent work!
You welcome!
Just curious what are you going to do to your tablet having root now?
Do you know if there is any posibility to install any rom or something like that?
Also knowing Prestigio I guess would be hard to find some updates hmmm
Hey man
Well the main reason I wanted to root first of all was to adjust the resolution of the display, it has a beautiful high resolution display as you know but some games... the FPS leave a lot to be desired. After doing some reading, some posts suggested lowering the display resolution to increase FPS - and the only way to do that was to root the device.
I did try one app, but it went a bit wrong lol. I was hoping it would readjust the resolution and resize the interface accordingly... instead it ended up changing the resolution, but the interface stayed MASSIVE. The device was inoperable and keep getting a "UI Error" constantly popping up making it unusable at all lol. Had to reflash and re-root so I am looking for another option
Beyond that, I have used custom ROMs in the past on my Android phones, but as far as I know, I believe there is only one ROM out there for our tablet and its based on CyanogenMOD I think... I may be wrong, but I thought I read something somewhere about it. Apart from that though, I am not really sure what else I will do now it is rooted Will open the door to some other apps for certain, but the OS itself seems fine and since the new firmware (v1.0.9) - it feels even faster than before!
What do you have in mind?
Yeah I noticed the issue of FPS in some games.... Well I didn't do many things yet I instaled Xposed and some modules.... and also I removed the navingation bar...is just that I dont like the way the navigation bar and status bar are together... thats why I was searching for another rom also which could have not the Ice cream sandwich bar.
I've found this: crewrktablets.arctablet.com where there are some roms with kit kat that may be work for our tablet but nothing confirmed yet...so I'm not sure if I'm gonna try it
and yeah with the new firmware is much faster thats cool.... but I'm almost sure will be forever in 4.2.2
It worked with MULTIPAD 4 QUANTUM 10.1PMP5101C-QUAD with last firmware too.
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
DyXen said:
Hello,
I really cant install drivers to windows OS (Win 8). I downloaded official drivers from prestigio website: http://www.prestigio.com/news/firmware_updates/New_Firmware_Update_for_MultiPad_4_Quantum_9_7
I tried all whats saying in manual but without a success. Is there another way do update to 1.0.7? Can i flash the image in recovery?
Have a nice day
Click to expand...
Click to collapse
Same problem. I can't get working driver for windows 10. Is it even posssible to upgrade my firmware on win 10? And btw DyXen there is already version 1.0.9 , maybe try that one. http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip
Tnx for this update
but its also useless cuz first i need to install drivers :S
DyXen said:
Tnx for this update
but its also useless cuz first i need to install drivers :S
Click to expand...
Click to collapse
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
yoyo97 said:
You've got some drivers here: http://storage29-free.uloz.to/Ps;Hs...7c-cwm-v6-0-3-zip?bD&c=1822785863&De&redirs=1
It's also root and cwm. But there is driver folder too. Even for windows 8. It might work.
Here are some instructions maybe you did something wrong
1. On tablet set the usb-connection-style to 'mass storage'. Settings, Memory-3 dots in the upper right corner- choose Mass storage
2. Turn off the tablet.
3. Connect the usb cable with PC and tablet.
4. HOLD DOWN the (volume +) key and turn the device on(still holding the vol.+) until you get a notice(driver not successfuly installed) on your PC.
5. Use the Manual(found in the downloaded folder) to install a proper driver. Or.: Go to Start-My Computer-Right click on it-Properties-Device Manager-Other devices-Unknown device-Update Driver- In the window browse the computer for the specific driver(that's why you need to know your systems pc)
Good luck.
Click to expand...
Click to collapse
Ok, i tried those drivers too but no success. I think maybe i need other OS.
I have developers options ON and USB debugging turned ON. (I think that should be turned ON)
P.S. I changed to mass storage and program did recognize the tablet but when i clciked switch (tablet turned OFF) and then it did not recognize anymore - i think problems with drivers.
Update to 1.0.9
Hello again,
I finally made it
Here is the thing:
1) Download this update (1.0.9): http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5297C_QUAD/PMP5297C_20140425_v1.0.9.zip from @yoyo97 (thanks)
2) Dont use drivers in folder /Drivers_x32 or /Drivers_x64
Instead go to /tools/Driver (and use this one x86 or x64 - depends on your OS)
3) Follow instructions in manual:
start RKBatchTool.exe and if icon is not green click Switch. Wait for tablet to shutdown and you should get green icon. (if this doesnt help turn off your tablet manualy and press AND hold volume + button for about 6-7 seconds DONT release and plug in USB cable then you should get notification on windows and green icon in RKBatchTool.exe)
4) Choose the firmware image and click upgrade.
5) let the software do the trick
6) profit
7) for rooting i used an android app called kingo root https://www.kingoapp.com/ just download the app on tablet. When you start it just click root and let the app do the trick.
After around 2-4min your tablet should be rooted.
I was using windows 7 (x86)
If you need any information please let me know and I will be glad to help
Have a nice day,
DyXen
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
hyderaly said:
Hi DyXen
Tried it all, but cannot get rockusb.inf to work on Windows 10 64-bit. I see two devices in my device manager after connecting the tablet, POrtable Device PMP5297C_QUAD and Android Composite ADB Interface. Have tried forcing the bundled Win8 x64 rockusb.inf on to both devices but keep getting "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems."
I have also tried DriverAssistant v4.4 and it installed the drivers OK.
Even tried copying the IMG and ZIP files to SD card and applying via recovery. Nothing works. My tablet is still stuck on 1.0.3 and is sluggish as a snail. Some help will be greatly appreciated.
Click to expand...
Click to collapse
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Please help
kompjuterija said:
The same problem I have with Multipad 4 Quantum 9.7 !!! No one driver is acceptable, no one method also. tablet is just frozen, only boot loader working but does not accept any update!!!
Click to expand...
Click to collapse
Could you solve it? Cause I have the same problem