Hello! Im buy Lumia 800 a few days ago. I have locked boot. But im found secret mode of boot.Maybe its helps to unlock.To enter the mode Press POWER+CAMERA. USB must be connected, Push this buttons until you see new screen on fone. In device manager of your pc you will see devise "ZUNE'" with corupt driver and ZUNE software will be crash.
Sorry for my Eanglish
USB\Vid_045e&Pid_0710 - its in device manager
Over 300 views and no idea what is it and how we can use it?
You just found the recovery mode, you need that to reinstall your backup if your update fails.
Greetz,
Rataplan said:
You just found the recovery mode, you need that to reinstall your backup if your update fails.
Greetz,
Click to expand...
Click to collapse
Ok, but why about this mode i nothing found on this forum? Do you try to enter this mode? Why Nokia Software and Zune didnt work with this mode?
djmorgan said:
Ok, but why about this mode i nothing found on this forum? Do you try to enter this mode? Why Nokia Software and Zune didnt work with this mode?
Click to expand...
Click to collapse
They both work with this mode, but normally you don't have to acces the mode only when your update fails you can manage it by pushing the both buttons you mentioned.
It happens with me that my update fails, (I'm using a 710) and the phone was only acceseble by this mode but unfortunally I couldn't flash any rom to my phone using this mode, not even my backup, I had to bring it to a repair centre, so please be carefull with your device.
Greetz,
Related
Hi, because with last update increased count of people with bricket phone, I just tryed search for way how to repair this phone. It seems, that last possible way how to save your phone is emergency mode.
I would like to notify you, that I didn't tested it (I'm had not luck enough to brick my phone yet ). I just searched and tried write this for help to others.
So, let's go on.
1) If it's not possible connect to phone via ADB (in Adroid SDK/tools run "adb shell") at all you will try next steps. If it will work, you can use another, verified tools like custom recovery or KDZ_FW_UPD (search on forum for more) [HOWTO] Flash original firmware on P500, )
2) If you fail in previous step, you can try enter into emergency mode manually and try to flash ROM with KDZ_FW_UPD:
Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they were not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Make sure that all update was done successfully. Phone should restart itself automatically
Disconnect the USB cable from the phone
Press the three button combo for HW reset of device i.e volume up + home + power button
List to do based on Zecanilis's [HOWTO] Flash original firmware on P500
3) Still no success? Wait for more "What I can do" or just go to LG and let repair on them.
Source:
http://forum.gsmhosting.com/vbb/f282/vygis-shell-v1-1-0-josedavido-1166478/ (included file named "Flash help.txt" in application)
http://android.modaco.com/content/l...modaco-com/321895/faq-gt540-reference-thread/
Please let me know if it works. I just searched for way and I haven't possibility to test this steps for now. I will do update if it will be necessary, same as I will try describe more about software which I founded.
Some experiences from thread(s):
AVanover5: ...It works if you set the mode to CDMA and DIAG. Just to let people know. Not sure if it'd work without the recovery screen or not. I never tried it ironically, haha. Thank you guys.
geejay2: ...Bricking seems to be easily achieved by forgetting to disable the LG Modem driver. Apparently the modem driver interferes during flashing. Also I noted that kdz is not stable under Win2k, I switched to WinXP to flash successfully. I saw several aborted flashing attempts in WinXP with modem driver enabled.
domenic_s:KDZ_FW_UPD doesn't work (Application cannot start) -.- Using Windows 7 64bit version. //edit: allright tried another pc (win xp 32bit) and yeah - it worked... I'm so happy.
Click to expand...
Click to collapse
About shaking (sorry, but I still can't believe... )
salte_eskil:wow! shaking the phone really worked! seems kind of stupid but thanks to you all at the xda forum for tips and tricks
4wd vege: Now unbricked. Strangely kdz updater only saw my phone after shaking!!!
me2kimi:It sound crazy to shake the phone while at emergency mode. I's crazy but it magic. ...So what I do is connect to usb, Launch software update at kdz while shaking the phone. Then after that kdz is working like normal.
Click to expand...
Click to collapse
I tried with all possible combination.. with and without battery.. vol- home, vol + return, power vol+ home.. end more.. but phone don't turn on...
In meantimes the phone is in the service LG.. hope...
Exscuse me for my English
Did you had phone off before trying this? And also battery should be charged. I just added this things...
If event that it not show you emergency mode, LG service and warranty is probably the only way how to proceed. Sorry. But I will be searching if another way will exist...
Good work .. I hope that you will find a way to solve ... especially for other users .. good luck
Good work @The_ERROR.
It should work. I think you should also add that the phone mode should be set to Emergency (and not DIAG as mentioned) in the kdz updater.
Moved to development and stickied it for a while!
Thank you!
Cheers
socialdistortion said:
Good work @The_ERROR.
It should work. I think you should also add that the phone mode should be set to Emergency (and not DIAG as mentioned) in the kdz updater.
Click to expand...
Click to collapse
Good to know - do you know differences between CS_EMERGENCY and EMERGENCY?
Recovery Phone?!
Hello,
Had anyone tried "Recovery Phone" from the LGMobile Update app? It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
Cheers.
Yes.. I tried.. but nothing.. the LG MOBILE UPDATE crashed because don't wiew the phone in Usb...
zeule said:
Hello,
Had anyone tried "Recovery Phone" from the LGMobile Update app? It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
Cheers.
Click to expand...
Click to collapse
I can add that as next possible way Let me expect it.
batman89i said:
Yes.. I tried.. but nothing.. the LG MOBILE UPDATE crashed because don't wiew the phone in Usb...
Click to expand...
Click to collapse
So... it sad everything
The_ERROR said:
Good to know - do you know differences between CS_EMERGENCY and EMERGENCY?
Click to expand...
Click to collapse
Not really. Gathered some info though. We use emergency mode when the phone boots into only emergency mode else we try CS emergency as last option.
In any case this method will work only if the kdz updater recognises the phone.
Further reading http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
I was able to do the KDZ, actually thats the only way possible. Please add this to the list:
1. Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments.
2. Install the LG drivers by selecting the update manager from the lg site.
3. Disable the modem driver.
4. Once done, reboot the handset and when it has come to emergency mode connect it via USB.
5. Its going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
6. shake the handset - IT DID WORKED FOR ME.
My suggestion don't give up. It took me around 14 hours to bring the handset back to original firmware and here I am today trying to boot the rom once again.
7. UPDATE AND ENJOY.
pariksheetsharma said:
I was able to do the KDZ, actually thats the only way possible. Please add this to the list:
1. Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments.
2. Install the LG drivers by selecting the update manager from the lg site.
3. Disable the modem driver.
4. Once done, reboot the handset and when it has come to emergency mode connect it via USB.
5. Its going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
6. shake the handset - IT DID WORKED FOR ME.
My suggestion don't give up. It took me around 14 hours to bring the handset back to original firmware and here I am today trying to boot the rom once again.
7. UPDATE AND ENJOY.
Click to expand...
Click to collapse
Thanks, I will do!! Only about 4 and five.
First reboot the handset and when it has come to emergency mode connect it via USB
and then
It's going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
So, whats about if phone didn't go into emrgency itself (for example stuck on Android logo)?
The_ERROR said:
Thanks, I will do!! Only about 4 and five.
First reboot the handset and when it has come to emergency mode connect it via USB
and then
It's going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
So, whats about if phone didn't go into emrgency itself (for example stuck on Android logo)?
Click to expand...
Click to collapse
I am talking about phone getting into Emergency mode, KDZ doesn't need to switch to CS_EMERGENCY or EMERGENCY Switch off the phone first, then you are either connect it to USB cable or you can remove it from the USB cable. Key combination to bring the phone only in emergency mode are:
1. Connected to USB cable, only thing visible is the LG logo, this is because its getting charged. Press VOL UP + BACK BUTTON
2. Not connected to USB cable and is not charging and so switched off: Press VOL UP + BACK BUTTON + POWER BUTTON
In both the cases phone will switch to a yellow screen showing: "Emergency mode!!" and will remain like that.
It's only in Emergency mode that the handset will be detected like a USB drive and can be KDZed.
I seriously doubt the "Shake your phone part". It just sounds so ...
Peace
pariksheetsharma said:
I am talking about phone getting into Emergency mode, KDZ doesn't need to switch to CS_EMERGENCY or EMERGENCY Switch off the phone first, then you are either connect it to USB cable or you can remove it from the USB cable. Key combination to bring the phone only in emergency mode are:
1. Connected to USB cable, only thing visible is the LG logo, this is because its getting charged. Press VOL UP + BACK BUTTON
2. Not connected to USB cable and is not charging and so switched off: Press VOL UP + BACK BUTTON + POWER BUTTON
In both the cases phone will switch to a yellow screen showing: "Emergency mode!!" and will remain like that.
It's only in Emergency mode that the handset will be detected like a USB drive and can be KDZed.
Click to expand...
Click to collapse
OK, I edited it. But I kept possibilities of EMERGENCY and CS_EMERGENCY modes if standard way failed. About switch into emergency, I think that it does not matter which way for emergency is used.
socialdistortion said:
I seriously doubt the "Shake your phone part". It just sounds so ...
Peace
Click to expand...
Click to collapse
Yes, I know... but if it will help, it doesn't matter how stupid it sounds....
Stuck in LG logo, unable to boot into emergency mode.
What can I do? Go to LG?
cjbi said:
Stuck in LG logo, unable to boot into emergency mode.
What can I do? Go to LG?
Click to expand...
Click to collapse
Have you tried all the mentioned methods? Press the combination buttons a little longer (Maybe that can help).
BTW what did you do that bricked your phone?
Hello guys, i'm going directly to the point. I was trying to root my mini pro and succeeded, buy i screwed up my build.prop and the phone is in a reboot loop. I spend the afternoon trying to find solutions but cant seem to fix it, this is what i tried:
- adb cant recognise the device
- I didnt install any recovery tool
- SEUS wont let me restore (it says that i have the lastest version and wont give any option to force it)
- PC Companion does something similar to SEUS
- Can't flash it and restore, i didin't unlock the bootloader, and i need adb to do it.
Anyone can help? Maybe i'm missing something when trying to use adb? maybe there is another more obscure way to unlock the bootloader without using "msm7227_semc.cmd"?
Thanks in advance...
EDIT: By the way, i made a copy of build.prop before toying around, so i know is there...
d__D said:
Hello guys, i'm going directly to the point. I was trying to root my mini pro and succeeded, buy i screwed up my build.prop and the phone is in a reboot loop. I spend the afternoon trying to find solutions but cant seem to fix it, this is what i tried:
- adb cant recognise the device
- I didnt install any recovery tool
- SEUS wont let me restore (it says that i have the lastest version and wont give any option to force it)
- PC Companion does something similar to SEUS
- Can't flash it and restore, i didin't unlock the bootloader, and i need adb to do it.
Anyone can help? Maybe i'm missing something when trying to use adb? maybe there is another more obscure way to unlock the bootloader without using "msm7227_semc.cmd"?
Thanks in advance...
EDIT: By the way, i made a copy of build.prop before toying around, so i know is there...
Click to expand...
Click to collapse
flashtools and the firmware used in chavitorg and proceeds to flash the device, if not enter flash mode press the three keys on the mini but the power button with the cable connected to PC, and you will recognize the flash mode.
ronaldvalles said:
flashtools and the firmware used in chavitorg and proceeds to flash the device, if not enter flash mode press the three keys on the mini but the power button with the cable connected to PC, and you will recognize the flash mode.
Click to expand...
Click to collapse
Thanks for the help, but i cant seem to find the word "chavitorg" or with b or anithing similar, not in google, not in xda. I doesn't look like a misspelling on any of the guys that post tutorials or flashes.
SEUS, PCC and flashtools already recognizes the device in flash with down volume alone, and the device has 4 keys + power, not 3 (vol+ vol- home and camera)
d__D said:
Thanks for the help, but i cant seem to find the word "chavitorg" or with b or anithing similar, not in google, not in xda. I doesn't look like a misspelling on any of the guys that post tutorials or flashes.
SEUS, PCC and flashtools already recognizes the device in flash with down volume alone, and the device has 4 keys + power, not 3 (vol+ vol- home and camera)
Click to expand...
Click to collapse
KEY MENU, BACK AND CENTRAL, AND POWER, and the firmware http://www.megaupload.com/?d=EPQJPIMW Chavito WHAT IS THIS COPY OF THE FOLDER firware and proceeds to FLASHTOOLS he was also FLASHING WITH BASEBAND 4015, expected to be of HELP
Thanks again, but it seems like you are giving me instructions for a Mini, while I have a Mini Pro, would it work? I know that some flashes are not interchangeable and stuff... and i don't want to completely brick the phone...
Seus or pc companion
baseband
Can you upload a working link for chavitorg's baseband please?
i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
I'm not an expert, but i'm just trying to help..
You can try checking on Linux if your device have 9 partitions, if yes, you can flash it with with the archive you created when you full-unlocked your phone, if u don't have it, you can ask for it to someone.
checked that already. those partitions are only accessible if qualcomm mode is present and i have dload. so what you suggested wont work. thanks though!
Have you tried with NSS? Check it at this link
look at my first post and the last line. haha i already tried that and it doesnt switch modes no matter what
deylo said:
i did a restore of my lumia 710 with zune and now the phone doesn't power on. no button combination works, no vibration, nothing! however when i plug in the usb cable windows recognizes the device as Nokia USB Connectivity. i had the Qualcom bootloader but put back on nokia dload sometime earlier. NSS detects my phone but shows it in OSBL mode and no matter which mode i try to switch the phone to in NSS, nothing happens! heeeeeelp
Click to expand...
Click to collapse
Have you managed to fix Nokia ?
well i sent the phone into nokia and a new phone is one the way
So,
I'm trying to flash my Z5C with latest LP but when I try to enter Flash Mode to do it the phone enters Safe Mode. Now some people say it might be driver related and yes, one of the Z5C drivers I tried installing says this:
Sony Net (03/19/2015 6.0.6000.16511) Not needed (No device for update present)
Now even if it is a driver issue, shouldn't I be able to enter flash mode by simply pressing Vol Down + Power Button? I still enter Safe Mode. Can I not enter Flash Mode any other way than the Vol Down + USB?
I bought this phone a week or so ago and have not fiddled with anything apart from turning USB Debugging and Unknown Sources on. Other than that I have not done anything, not even OTA as it instantly goes to MM. This phone is stock firmware from factory.
Now when I tried connecting to Flashtools by entering Safe Mode (which I thought was flash mode but with a diff name) Flashtools either says Debugging is off or it goes as far as saying "Root Access Denied" (Note: it's not an error, just another message) and stops. The popup which says to plug in the phone doesn't dissapear either. So that's where I'm stuck and it's due to me not being able to enter Flash Mode on the phone.
So question is, what am I doing wrong?
PS. I will try this all over again on my W7 desktop as I've only tried with my W10 laptop and I know there are different driver settings. Yes I did enable "No Driver Signature"-mode on W10 prior to installing them but nothing changes.
Thankful for any help as I don't want stock, cause it's not very optimized and also phone can get a bit hot whereas they fix a lot of issues with these updates.
[EDIT]
Btw, can't find Sony PC Companion on the official site. Instead it's replaced by Xperia Companion. Inferior in tools but I assume they have the same drivers for phones included?
Anthraxiousness said:
So,
I'm trying to flash my Z5C with latest LP but when I try to enter Flash Mode to do it the phone enters Safe Mode. Now some people say it might be driver related and yes, one of the Z5C drivers I tried installing says this:
Sony Net (03/19/2015 6.0.6000.16511) Not needed (No device for update present)
Now even if it is a driver issue, shouldn't I be able to enter flash mode by simply pressing Vol Down + Power Button? I still enter Safe Mode. Can I not enter Flash Mode any other way than the Vol Down + USB?
I bought this phone a week or so ago and have not fiddled with anything apart from turning USB Debugging and Unknown Sources on. Other than that I have not done anything, not even OTA as it instantly goes to MM. This phone is stock firmware from factory.
Now when I tried connecting to Flashtools by entering Safe Mode (which I thought was flash mode but with a diff name) Flashtools either says Debugging is off or it goes as far as saying "Root Access Denied" (Note: it's not an error, just another message) and stops. The popup which says to plug in the phone doesn't dissapear either. So that's where I'm stuck and it's due to me not being able to enter Flash Mode on the phone.
So question is, what am I doing wrong?
PS. I will try this all over again on my W7 desktop as I've only tried with my W10 laptop and I know there are different driver settings. Yes I did enable "No Driver Signature"-mode on W10 prior to installing them but nothing changes.
Thankful for any help as I don't want stock, cause it's not very optimized and also phone can get a bit hot whereas they fix a lot of issues with these updates.
[EDIT]
Btw, can't find Sony PC Companion on the official site. Instead it's replaced by Xperia Companion. Inferior in tools but I assume they have the same drivers for phones included?
Click to expand...
Click to collapse
USB is the only way. I had to use 4 different PCs before finding one flash tool liked BTW. And you are kind of wrong about they fix issues with these updates. They really just create more. I'm on.200 LP and probably never going MM until aosp can deliver because MM is so messed up.
Did you get this sorted?
I can't boot into flash mode either, and I am stuck on a boot loop. Phone trying to setup and processes stopping.
civicsr2cool said:
USB is the only way. I had to use 4 different PCs before finding one flash tool liked BTW. And you are kind of wrong about they fix issues with these updates. They really just create more. I'm on.200 LP and probably never going MM until aosp can deliver because MM is so messed up.
Click to expand...
Click to collapse
Thank you for the suggestion to try different PCs. I only have the one at home but I tried a different USB port and Flashtool is working now. Bizarre.
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
[email protected] said:
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
Click to expand...
Click to collapse
Did you tried the Mega unbrick Guide?
Never loose hope buddy we have many devs here to help us
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
faap25 said:
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Click to expand...
Click to collapse
Thank you for your help. I was trying to do it with this mega unbrick guide, but at step 4 I connected it to my pc and the device manager didn't show up anything. Do I need to install any drivers before doing that or uninstall the adb drivers I previously installed?
Thank you
Finally it worked! The problem was the usb cable I was using!