Related
Hi guys,
I recently bricked my X10a and have been having problems trying to connect it to my pc. I can get it into flash mode and connect it to my pc but when its plugged into my computer, FlashTool can't detect it and my computer can't either. Is there anyway I can check? if I have the proper drives? Also if I don't have it is there a way to download it? Thx in advanced.
Btw I'm using my freinds HTC G2 USB cable to connect it to my pc. Could this be effecting it? Do I need the official sony ericsson USB EP700? Thx for this as well.
Running windows vista home basic 32-bit
do you have seus the sony ericsson program on your computer?
I believe that will help you get the proper drivers when you install it.
its on the sony ericsson website under downloads.
Sent from XDA Premium from my X10a rooted running 2.2.1 Pure CM Rom from kxhawkins
Use SEUS i have the same and it helped me
I tried using seus but it won't read my phone at all. Unless I have a broken USB port on my phone It can charge but not connect to my computer.
Are you using a USB hub?
It's straight into my computer. Idk whats going on :\
Do you have a firewall or something similar installed? It might interfere with the connection if you have the firewall settings set to very high. Might need to specifically set permissions for it to have seus and the drivers run...
After doing some research I'm almost certain it is the cable. This cable is the official one from HTC and on further reading it says only compatible with HTC phones. But thank's for the help guys. I'm gonna but a new SE USB cable and hope it turns out good. I'll be back if anything goes amiss.
Come on... Tired to read "I bricked my x10" when you have 1% to really brick it, is this so hard to use correct words ??????????
Bricking is non-sense in x10, even with custom kernels... PSP CAN be bricked, a "real" brick, not x10.
It looks many people is new to this, there's no problem but it's very boring to read sensefull words for everything... These people definitely didn't live the period bricking was meaning something.
Perceval from Hyrule said:
Come on... Tired to read "I bricked my x10" when you have 1% to really brick it, is this so hard to use correct words ??????????
Bricking is non-sense in x10, even with custom kernels... PSP CAN be bricked, a "real" brick, not x10.
It looks many people is new to this, there's no problem but it's very boring to read sensefull words for everything... These people definitely didn't live the period bricking was meaning something.
Click to expand...
Click to collapse
Bricking in the x10 world is the bootloop. When our bootloader gets cracked the meaning of it will change.
PlayGunsta said:
Bricking in the x10 world is the bootloop. When our bootloader gets cracked the meaning of it will change.
Click to expand...
Click to collapse
I agree, but bootloop is no way a brick.
Misunderstanding dogs and cats is pretty weird
Hopefully with loader hack we will give indeed a much more realistic meaning to what bricking is
I also learned that the hard way i guess.
cloud911208 said:
After doing some research I'm almost certain it is the cable. This cable is the official one from HTC and on further reading it says only compatible with HTC phones. But thank's for the help guys. I'm gonna but a new SE USB cable and hope it turns out good. I'll be back if anything goes amiss.
Click to expand...
Click to collapse
No, you just need a plain USB cable. I have both the X10 and the HTC HD2 and I use the same USB cables between the two. No issues.
Hey! its hard to brick an X10.. maybe you have a lower battery problem. try to charge it fully with an a universal charger or another X10. and use another desktop,USB port. the cable must be an a micro USB only. its doesen matter if the cable comes from an HTC, Nokia or other device, it shoud work Remember the drivers.. hope it helps! Sorry for my english, am from argentina
cloud911208 said:
I tried using seus but it won't read my phone at all. Unless I have a broken USB port on my phone It can charge but not connect to my computer.
Click to expand...
Click to collapse
You have a broken USB port ! x10's disease !!!
You should return your X10 to a Sony Repair Center.
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
USB Ports
Just out of curiosity, have you tried a different usb port? Sometimes (and I think it's windows fault) I can use something on a certain port for months, then it will stop working, changing ports fixes it, then when / if that port stops working i'll switch back to the first port I started with... rinse / repeat.
Remember the old Nintendo Carts, when they would get dusty, they wouldnt work until you cleaned them? Could be the same thing, issue with the port, dust, or just going bad.
It could either be a driver issue / and or the actual port. Esp if it's an older usb 1.1 spec port.
I am running OnlyOne, and it's running fine here as far as computer seeing it / charging. I don't think you would get 2 phones that are defective back to back, Check your computer first, especially if it consistently will charge with the AC adapter and not the computer.
mtnichols04 said:
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
Click to expand...
Click to collapse
Ive tried different ports on 3 different computers, tried cleaning, tried on usb 1.0 1.1 and 2.0 no luck, tried another person usb cable, earlier today with the wall charger it would charge, now, it wont charge at all. Kies drivers are installed, Thank you for your ideas though
I have an IT degree, Ive been working with electronics\computers for 10+ years and Im completely dumbfounded...
jb0nd38372 said:
Just out of curiosity, have you tried a different usb port? Sometimes (and I think it's windows fault) I can use something on a certain port for months, then it will stop working, changing ports fixes it, then when / if that port stops working i'll switch back to the first port I started with... rinse / repeat.
Remember the old Nintendo Carts, when they would get dusty, they wouldnt work until you cleaned them? Could be the same thing, issue with the port, dust, or just going bad.
It could either be a driver issue / and or the actual port. Esp if it's an older usb 1.1 spec port.
I am running OnlyOne, and it's running fine here as far as computer seeing it / charging. I don't think you would get 2 phones that are defective back to back, Check your computer first, especially if it consistently will charge with the AC adapter and not the computer.
Click to expand...
Click to collapse
mtnichols04 said:
Installed ICS 4.0.3 on my sgh-i717, a few days later it stopped charging and was unable to be recognized on any PC. I connected it to Kies via wifi, put the stock att rom back on it, reflashed though CWM, flashed counter and still nothing, set it back to samsung, got a new phone.
THen yesterday (2 days after i got my new phone) I flashed the new OnlyOne ICS rom 4.0.4 on my phone, then not even 3 hours later, my USB wasnt working again.......charges when it wants, but CANNOT be recognized by and PC....wtf?
Any ideas please!!! ?? THank you!
Click to expand...
Click to collapse
Ouch..... Sorry Bud........
I hope you still have insurance on your phone and I would put it back to stock and see if that works out for you buddy.
If you have access to another phone , try to download seraphim a great from and put it on there and flash it. Inside of the newest seraphim there is a USB storage mount option which should fix your problem. I hope this will fix the problem
Sent from my GT-P7510 using XDA
Doesn't sound like a ROM issue or one that requires a different ROM to be installed just because it contains a USB selection. To me it sounds like you have a bad cable or a few bad cables. I would try a new micro usb cable. I have had that issue happen a few times with quite a few phones. Cables that just don't click when inserted don't always make the proper contacts. And owning another cable can't hurt, just make sure it is a good brand.
severinca said:
If you have access to another phone , try to download seraphim a great from and put it on there and flash it. Inside of the newest seraphim there is a USB storage mount option which should fix your problem. I hope this will fix the problem
Sent from my GT-P7510 using XDA
Click to expand...
Click to collapse
I tried reverting back to a Gingergbread rom, tried re flashing a few different roms, no luck. Tried a few different usb plugs from different phones... how can you mess up a micro USB just from flashing... makes no sense.
Idk about the charging part, but i had the same issue with pc not recognizing my phone after i flashed new ROM on it and could not share files and what not i found a solution for that try this. Make sure phone is unpluggdd from pc. Go to settings>Wireless and network>USB utilities> connect storage to pc then it will tell u to plug your phone, do so. And phone should prompt you with the normal USB storage click it and your good to go.
Sent from my SGH-I717R using XDA
I upgraded my phone to official ics with pc companion. It was working perfectly about one month but then suddenly it bricked. yesterday I had low battery (3 %) and I pluged it in charger and left so and in the morning I saw it's charged and unpluged. but then in 5 min I went back to phone and I saw it's OFF. I wanted to start it and when I pushed power button only sony logo appeared and then black screen, then I removed battery and did that again (did so 2 times) and then when I inserted battery again and pushed power button it didn't react at all. no vibration no screen light. when I plug it to charger it doesn't react as well... so It doesn't react to any flashtool or smth.. please if you can,help me with it I'll really appreciate your help..
p.s I have locked bootloader and was always running official roms..
I think your the 3rd person this had happened on this site. But unfortunately, nobody has figured it out.
I may of had an idea, did you charge your phone under your pillow? As my gets really hot and discharges under mine. So I thought maybe yours had overheated and burnt out?
Sent from my Xperia Ray using xda premium
it was on the opened aria but I've checked already nothing is burned there.. but anyway thanks.. bad that it(brick) comes from nowhere and no solution so far....
is Your phone is working on fastboot mode
Sent from my ST18i using XDA
can your phone go into flashmode? or fastboot mode? have u tried flash again? seems like a case of flash error IMHO
syin16 said:
can your phone go into flashmode? or fastboot mode? have u tried flash again? seems like a case of flash error IMHO
Click to expand...
Click to collapse
it doesn't react to usb even in flash mode (with flashtool ) any ideas....?
Hmm, I had the same problem on my phone.
I just wiped batterystats and it worked fine.
Maybe try that?
Or check your usbcable, or change it.
Or do you use any third party usbcable?
Skickat från min ST18i via Tapatalk 2
DevStaffAndroid said:
Hmm, I had the same problem on my phone.
I just wiped batterystats and it worked fine.
Maybe try that?
Or check your usbcable, or change it.
Or do you use any third party usbcable?
Skickat från min ST18i via Tapatalk 2
Click to expand...
Click to collapse
how can I wipe batterystatus when I can't even start phone.. when I push power button it even doesn't vibrate,doesn't start at all.. and no pc is recognizing it.. I'm using it's own usb which came with phone so.. It looks like phone really died.. I have android phones 2 years almost and I have never seen such thing..
gtsik said:
how can I wipe batterystatus when I can't even start phone.. when I push power button it even doesn't vibrate,doesn't start at all.. and no pc is recognizing it.. I'm using it's own usb which came with phone so.. It looks like phone really died.. I have android phones 2 years almost and I have never seen such thing..
Click to expand...
Click to collapse
have you tried changing the battery? try finding anyone of ur frens that have the ray and sway their full battery with yours. Since from your previous post seems like the battery didnt charge at all.
I think the problem with 4.0.3 (and cwm) is that sometime it can not charge while off. But I think your case might be different if it is not recognised at all. Can you try borrow someone battery?
I have some external battery charger and I'm charging battery with it but anyway thanks guys I'll try it today.. will find another ray battery..
guys I identified problem.. bootloader is dead.. but it can be repaired with a setool.. I'm connecting phone with using testpoints to pc and windows recognizes it but no other software.. just setool, for what I need some cards and it's paid.. so if somebody can help me with setool please contact me.. I'd really appreciate and will consider donation..
gtsik said:
... and I pluged it in charger and left so and in the morning I saw it's charged and unpluged...
Click to expand...
Click to collapse
Does the 4.0.3 update bring auto unplug upon full charge, or is it a hardware mod?
...somebody thank me for a good question, I'm dying for a thanks.
Sent from my ST18i using XDA
same problem here
Hi, I have a bricked Ray. When booting y can see Sony logo and then a black screen.
No adb nor fastboot can see phone, Flashtool detects phone is connected but can not do any action. Can not acces recovery or bootloader
Is there any chance for me other than technical service?
gtsik said:
guys I identified problem.. bootloader is dead.. but it can be repaired with a setool.. I'm connecting phone with using testpoints to pc and windows recognizes it but no other software.. just setool, for what I need some cards and it's paid.. so if somebody can help me with setool please contact me.. I'd really appreciate and will consider donation..
Click to expand...
Click to collapse
i had same problem but my boot loader is unlocked dont know if that makes any difference all i did was restore using setool my rays working fine now
gtsik said:
guys I identified problem.. bootloader is dead.. but it can be repaired with a setool.. I'm connecting phone with using testpoints to pc and windows recognizes it but no other software.. just setool, for what I need some cards and it's paid.. so if somebody can help me with setool please contact me.. I'd really appreciate and will consider donation..
Click to expand...
Click to collapse
Brother Try s1tool its free
and try to restore the bootloader may something is messing up with the bootloader
hope this will work:good::good:
Maybe i don't know if it can happen but still
i think problem can also happen because of KERNEL problem
soft brick solved
got it finally working, i managed to flash firmaware ST18i_4.1.B.0.431_Nordic with flashtool :laugh:
thanks all
So a little history, I flashed my vibrant from Bionix v1.3.1 (fishmanmod) to ICS and started to have a lot of troubles with random restarts and battery issues. Prior to ICS everything was perfect. I've tried so many different versions of ICS and all of them have resulted in random shut downs. The most recent one I tried was Slim ICS. After having such bad luck with ICS roms I decided to go back to Bionix. However my phone now cannot be recognized by my computer which was weird because it did when I flashed it back to stock to install ICS cleanly. I tried various different drivers, uninstalled, reinstalled kies, almost everything I thought of. So then I was like okay, I'll just go back to a nandroid backup of Bionix. Stupid idea, should have read up more on that as it softbricked my phone. Now I'm stuck with a phone that stays on the Vibrant screen. I can get it into download mode with holding vol+ and power but that is no use because windows keeps saying it cannot recognize my device. I can't get it to recovery mode either to flash any roms I have on the phone. It might be a hardware issue because my mothers vibrant gets detected with the same drivers but just a couple of days ago I flashed my phone back to stock with odin which really confuses me. Does anyone have any ideas I could do? Is there a way to get into recovery mode to flash different roms? Is there a manual way of installing the drivers or surefire way of knowing if the vibrant has hardware issues?
Also when I flashed back to stock with odin it did take a good hour of installing and reinstalling drivers for my computer to recognize it in download mode. I've tried 3 different cables, one by samsung and the other two are third party. All these cables work on my mother's vibrant. I've also tried a different computer as well, no luck.
Try deleting ALL USB drivers from your PC and plug in the phone. It should automatically search and download drivers. If that doesn't work then its most likely something to do with the USB cable. I recently soft bricked my vibrant too and my USB would not work at all but it worked fine on a friends phone(weird). So I bought a new one from T-Mobile themselves and it worked! I was really close to believing I had a bad USB port on my phone,if a new cable doesn't work that could be the issue for you. There are a few places online that will replace your USB port on the phone for around 40 bucks, a new USB cable from T-Mobile will cost around $15.
PS: You can search ADB reboot recovery but this will not work unless you can connect to the PC. I personally would buy a new cable from T-Mobile just to know if its a bad USB port on your phone.
Sent from my SGH-T959 using XDA Premium App
Running ICS Passion
iTz KeeFy said:
Try deleting ALL USB drivers from your PC and plug in the phone. It should automatically search and download drivers. If that doesn't work then its most likely something to do with the USB cable. I recently soft bricked my vibrant too and my USB would not work at all but it worked fine on a friends phone(weird). So I bought a new one from T-Mobile themselves and it worked! I was really close to believing I had a bad USB port on my phone,if a new cable doesn't work that could be the issue for you. There are a few places online that will replace your USB port on the phone for around 40 bucks, a new USB cable from T-Mobile will cost around $15.
PS: You can search ADB reboot recovery but this will not work unless you can connect to the PC. I personally would buy a new cable from T-Mobile just to know if its a bad USB port on your phone.
Sent from my SGH-T959 using XDA Premium App
Running ICS Passion
Click to expand...
Click to collapse
Yeah I've read in another post about how someone bought a replacement cable from T-Mobile which fixed the problem. I find it weird how the stock samsung cable does not work yet the T-Mobile cable did. What makes the 15 dollar T-Mobile cable better? I'll definitely give it a shot though.
faze2 said:
Yeah I've read in another post about how someone bought a replacement cable from T-Mobile which fixed the problem. I find it weird how the stock samsung cable does not work yet the T-Mobile cable did. What makes the 15 dollar T-Mobile cable better? I'll definitely give it a shot though.
Click to expand...
Click to collapse
I'm not sure what makes it better to be honest, it's just one of those things where their cables work better. It is most definitely more durable than the stock cable that came with my phone. If you have a problem with Tmobile's USB cable not working then you most likely have a bad port on your phone(happens more than you might think). I feel like a new cable will solve your problem tho, let us know if it works!
Sent from my SGH-T959 using XDA Premium App
Running ICS Passion
So I bought the T-Mobile universal data cable in store for 12.99 and turns out it did not work. That's okay, they told me I could return in within 30 days to get a full refund. Now my only hope is to send it to someone who could repair it.
The phone can go into download mode, so hopefully once this usb port gets fixed I can finally get into odin. Thanks iTz KeeFy for the suggestion to try a different cable.
faze2 said:
So I bought the T-Mobile universal data cable in store for 12.99 and turns out it did not work. That's okay, they told me I could return in within 30 days to get a full refund. Now my only hope is to send it to someone who could repair it.
The phone can go into download mode, so hopefully once this usb port gets fixed I can finally get into odin. Thanks iTz KeeFy for the suggestion to try a different cable.
Click to expand...
Click to collapse
Your welcome, too bad it didn't work. Atleast you know its a bad USB port now. I know www.mobiletechvideos.com is a trusted place to send your vibrant. I'm not positive they fix USB ports but I'm pretty sure they do. I would check there first, good luck!
EDIT:They do fix USB ports, here is the link.
http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-usb-port-repair/
Sent from my SGH-T959 using xda premium
So I just got back my vibrant from MobileTechVideos and the usb port works now! I was able to odin back to stock and all is good now. Thanks for the recommendation iTz KeeFy and I recommend anyone who has USB troubles to send your phone to MobileTechVideos, it's legit.
faze2 said:
So I just got back my vibrant from MobileTechVideos and the usb port works now! I was able to odin back to stock and all is good now. Thanks for the recommendation iTz KeeFy and I recommend anyone who has USB troubles to send your phone to MobileTechVideos, it's legit.
Click to expand...
Click to collapse
Awesome, glad your up and running again.
Sent from my SGH-T959 using XDA Premium App
Ok so if anyone can help it would be very much appreciated . I bought a Sony Xperia Z WiFi only tablet about 6 months back and only 1 month into having the device it stopped charging and now I can no longer turn it on. I don't know if its the system itself or the minibus port honestly. Ive tried several things but nothing seems to work . Details- Device suddenly shut down while there was plenty of power left . I unlocked bootloader and tried to flash custom rom but couldn't figure out a small part at the end right before restarting but was able to flash a stock rom straight from Sonys FlastTool . I need this device to run my Sonnos App cause I just bought the whole kitten kabudle and my Nokia Lumia 2520 runs Windows RT which unfortunately has yet to develop an app for Sonnos . Any help would be much appreciated!
You may still be able to charge it via the dock connector if you can get hold of one but it won't be as convenient as being able to use a micro USB charger. Personally I'd take it back as it isn't a year old yet and see what Sony say.
Sent from my SGP321 using Tapatalk
Yeah contact Sony they are really good with repairs
Sent from my C6506 using Tapatalk