Related
Any idea of what does it mean?????? mother board or the display broken??It was working ok. I was changing speeker on it . And then screen gone on it
mrgold2505 said:
Any idea of what does it mean?????? mother board or the display broken??It was working ok. I was changing speeker on it . And then screen gone on it
Click to expand...
Click to collapse
I'm not sure,but maybe you touched the LCD wire,open it again and take a look,disconnect it and connect it...i have no idea about xperia x10's hardware,it's only a suggestion :good:
Hey, seems that issue is from lcd, if you try to enter in xrec mode, did the phone show you full screen of 1/4 only?
mrgold2505 said:
Any idea of what does it mean?????? mother board or the display broken??It was working ok. I was changing speeker on it . And then screen gone on it
Click to expand...
Click to collapse
I think You've messed up sth. with the LCD connection cable
My S3 fell out of my hand and hit the floor on its corner. When i turned it on again the screen was all green and the touch no longer worked. Now when i turn it on nothing shows up and the screen stays black. I was thinking of repairing it myself, so would i need to just buy a new screen or more?
iHodzic said:
My S3 fell out of my hand and hit the floor on its corner. When i turned it on again the screen was all green and the touch no longer worked. Now when i turn it on nothing shows up and the screen stays black. I was thinking of repairing it myself, so would i need to just buy a new screen or more?
Click to expand...
Click to collapse
See this post first .
http://forum.xda-developers.com/showthread.php?t=1735327
jje
JJEgan said:
See this post first .
http://forum.xda-developers.com/showthread.php?t=1735327
jje
Click to expand...
Click to collapse
Do you think that i could use this, or would i need something else?
http://www.ebay.co.uk/itm/GENUINE-S...K_Replacement_Parts_Tools&hash=item1e7816e0a6
iHodzic said:
Do you think that i could use this, or would i need something else?
http://www.ebay.co.uk/itm/GENUINE-S...K_Replacement_Parts_Tools&hash=item1e7816e0a6
Click to expand...
Click to collapse
If you use that you must realise that separating the glass from the digitizer is a very tricky fiddly hit and miss process where you are more likely to break than mend in all honesty
I think that the screen is broken too. Because you said that the screen was black after turning it on. Think u need a new display + digitizer. They sell them on ebay for 200 dollar. It's expensive I know but I don't think there's an other option.
http://www.ebay.co.uk/itm/Genuine-Samsung-S3-SIII-GT-i9300-New-Touch-Screen-Amoled-Lcd-display-Digitizer-/121068012505?pt=UK_Mobiles_Accessories_RL&hash=item1c303743d9
Ok, thanks so much for the help everyone!
and there's no guarantee that the screen is the only thing broken.
PS there's a "thanks" button
Hello, I want your help to fix my xperia go touchscreen problem. Well, Ive searched the similar problem on the forum but what I found is about "touchscreen not working" only.. was, it's very easy to text and slide trough the screens without any "not so responsive screen".. after few months my xgo became less sensitive like before, when I tried to type as fast as usual. The screen cant detect my touch.. I compared with my friend's xgo and it is easier to text on his xgo.. its because I flashed wrong rom? I flashed one roms so far (superJB and currently back on stock with phantom 1.0.9 kernel) thanks.
Xgo .100 JB with UBL.
Open your device's build.prop using any text editor and check
ro.sf.lcd_density=??
Compare its value with your friend's xperia go and edit it accordingly. After you've done with editing, restart your device.
Check screenshot in the attachment.
Note: Do not put value similar to that of screenshot. It is just for your reference.
If I helped you then press Thank you.
Sent from my MT27i using xda premium
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Devo1982 said:
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Click to expand...
Click to collapse
I have same problems with my xperia go .it became unresponsive ..
i didnt drop it just became like that .
I get this issue too since i accidently drop it. But when i try to testing games and the phone getting heat up and now its more sensitive than before. Maybe not as sensitive as back there at GB but its better now. Almost as sensitive as when i try using JB at 1st time i think.
Oh yeah.. i even already try to open it before to check if the connector are losen or something like that with no result. And already prepare to changing my touchscreen but i think its not necesary now. Hope this help
i have the same problem, mine im gonna change the digitizer this month.
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Please report here if your back to normal again after you change your digitizer. Coz mine still choosing something sometime if i swipe through it even the sensitivity is good now.
ah7 said:
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
Click to expand...
Click to collapse
I use mine to record fish on beach at first month but its still good at that time. Mine dropped few times but the last drop make it not sensitive as before, since i used it like what i post before the sensitivity back to normal but sometime (in 1 of 8) not recognize my touch.
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
LENNUJ said:
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
Click to expand...
Click to collapse
seems like mine is problem with digitizer too...(marking on red) Thx BTW
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
LENNUJ said:
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
Click to expand...
Click to collapse
yeah i use back cover too (i dont know about the brand). i dont think the back cover affect the digitizer coz i already use it at least 2 month after i buy mine but the digitizer is became troubled last month since i drop it.
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Hey , does the touch screen turn to normal after you change the digitizer ?
Please give a feedback on that . Anyone ?
Red stripes shows dead spots on my Xperia U, ill try replacing Digitalizer next week, but if anyone can report it before, it would be helpfully.
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
LENNUJ said:
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
Click to expand...
Click to collapse
Its china...
SIGNATURE OUTDATED. I now use honami moonwalker 4.2
"AndroidNoob69.... Your favorite NOOB!"
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
LENNUJ said:
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
Click to expand...
Click to collapse
Nice... because i am planning to replace my digitizer by my self too when i got my digitizer spare . Just need to know what the other things i would need to change it perfectly (Make sure my XGO still have water resistant capability). Sooo... i would appreciate if u could reporting back when you done it .
Same problem.. My phone is not sensitive as usual.. When typing and gaming, it is really annoying.. :'(
How much is the digitizer for Xperia U?
I didn't do nothing and the phone just became not sensitive to touch.. Sliding is good but when I press 3 times to screen.. Only 2 times approx is known to touch..
Help me out ? Only way is change digitizer?
Just make sure u didnt get touchscreen issue from lag. I use custom rom and the touchscreen is feel better, but some area still hard to use because mine is defect already. U could try search on google for ur digitizer price .
Sent from my ST27i using xda app-developers app
Hi to everybody,
Two months after to buy my Z2, I made the mistake to put my phone on my legs and it fell. Result: my screen has crashed
I sent it to repair and the technical support changed my screen,
All is now working fine, less the "double tap to wake" option.
I installed the last update to know if i could fixed it, but it still no working.
Any one know if is the double tap managed by hardware? (the screen maybe?)
Thank you so much!!
Ps: Sorry for my english
This feature has never really worked relatively well for me anyway
While sometimes it works other times I find myself tapping the screen repeatedly with no effect
Not sure about your issue as if the touch screen is working then I can't see any reason why the touch shouldn't work as well as it did previously unless it's a cheap replacement not an OEM
Sent from my D6503 using XDA Free mobile app
manemzjum said:
This feature has never really worked relatively well for me anyway
While sometimes it works other times I find myself tapping the screen repeatedly with no effect
Not sure about your issue as if the touch screen is working then I can't see any reason why the touch shouldn't work as well as it did previously unless it's a cheap replacement not an OEM
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
I sent my phone to official technical support in Portugal, so in theory the screen is OEM
Thanks for answer
Xikisan said:
Hi to everybody,
Two months after to buy my Z2, I made the mistake to put my phone on my legs and it fell. Result: my screen has crashed
I sent it to repair and the technical support changed my screen,
All is now working fine, less the "double tap to wake" option.
I installed the last update to know if i could fixed it, but it still no working.
Any one know if is the double tap managed by hardware? (the screen maybe?)
Thank you so much!!
Ps: Sorry for my english
Click to expand...
Click to collapse
Might sound like a stupid question but have u enabled the double tap to wake in the settings?
Is not a stupid question, but yes, I have the option enabled
Xikisan said:
Is not a stupid question, but yes, I have the option enabled
Click to expand...
Click to collapse
Have you tried doing a factory reset? Maybe it will help. This function is kernel related so it should work, unless the screen is not like the original one. Just saying.
No I didn't.. I only installed the last update by Flashtools
Xikisan said:
No I didn't.. I only installed the last update by Flashtools
Click to expand...
Click to collapse
I was wondering, does the glove mode work? Does it show a purple circle when your finger is close to the screen?
Radu_Stancu said:
I was wondering, does the glove mode work? Does it show a purple circle when your finger is close to the screen?
Click to expand...
Click to collapse
I would try this as suggested and this will give you a somewhat measurement of the sensitivity of the screen
manemzjum said:
I would try this as suggested and this will give you a somewhat measurement of the sensitivity of the screen
Click to expand...
Click to collapse
Exactly what I was about to say...
Yes, when my finger is close to the screen the purple circle appears
Radu_Stancu said:
I was wondering, does the glove mode work? Does it show a purple circle when your finger is close to the screen?
Click to expand...
Click to collapse
Yes when my finger is close to the screen, the purple circle appears.
Xikisan said:
Yes when my finger is close to the screen, the purple circle appears.
Click to expand...
Click to collapse
Well that means your screen should be okay. I tried tap waking my Z2 and it responded every single time, with really fast taps and slow taps, so something is definitely wrong with yours. Problem is I can`t tell what...
Well.. I hope that with Lollipop it will be solve..
Tip with this matter, you have to "knock" on the exactly the same spot both times. Then it works much better.
No way [emoji17]..
I tapped for 10 times consecutively but nothing...
those who have there z2 lollipop please go to service menu *#*#7378423#*#* and just move ur phone up and down i mean in angle and tell me is there any design pattern comming there? i have glitters on my screen please help @luutinhit.1412 @gihan798114
any1?
Nope. Nothing's happening. I can shake, lift up, etc my phone and nothing happens. No movement affects it.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
nothing happens glitters on your screen? is it in black areas?
I don't have Z2, my phone is Z Ultra. So, i don't have problem the same. So sorry
But, I think you can report to Sony support
gihan798114 said:
nothing happens glitters on your screen? is it in black areas?
Click to expand...
Click to collapse
yes only back background..
droid.riz said:
yes only back background..
Click to expand...
Click to collapse
maybe there are dead pixels in your phone due to some damage the phone took, try replacing the display?
gihan798114 said:
maybe there are dead pixels in your phone due to some damage the phone took, try replacing the display?
Click to expand...
Click to collapse
How can dead pixels not visible on homescreen or others in camera app...
Lso its like glitters which spans the screen if we move up or down screen
I get it too, I know what you're on about. I think it's normal.
droid.riz said:
How can dead pixels not visible on homescreen or others in camera app...
Lso its like glitters which spans the screen if we move up or down screen
Click to expand...
Click to collapse
you might be talking about the screen itself. Its not a issue. Its the screen it self. nothing to worry about as its with every sony phones. I had a Xperia Mini Pro and the glitterish screen was there. its more visible if you lock the screen and turn the display on a light source like the sun
gihan798114 said:
maybe there are dead pixels in your phone due to some damage the phone took, try replacing the display?
Click to expand...
Click to collapse
gamer649 said:
I get it too, I know what you're on about. I think it's normal.
Click to expand...
Click to collapse
Thanks for this reply!!!!
Its same right its pans the scren if we tilt the phone just a single glittering line
gihan798114 said:
you might be talking about the screen itself. Its not a issue. Its the screen it self. nothing to worry about as its with every sony phones. I had a Xperia Mini Pro and the glitterish screen was there. its more visible if you lock the screen and turn the display on a light source like the sun
Click to expand...
Click to collapse
Thanks alot!!! Its just span over screen single line glittering if we tilt the phone only im service menu
[deleted]