[Q] Hard bricked two times need help - AT&T Samsung Galaxy Note I717

First let me put it out there that I have been rooting and installing roms for multiple phones with no issue ever.
I tried to install *TheCollective*AoCP - CP4.4 for i717 on my note and it hard bricked the first one I don't know why but it did. No biggie so I went through warranty and got a new one today. Heres my process (Assume I have samsung usb drivers already installed and battery is 100%)
Enable USB debugging
Used Odin3 v1.83
Used cwm-touch-i717-120414.tar.md5
Downloaded *TheCollective*AoCP - CP4.4 for i717
Downloaded gapps-jb-20120726-signed
Added both to SD card
Boot into Recovery
NANDroid backup
Wipe data/Factory reset
Wipe Dalvik cache
Format /system
Install ZIP From SD Card (RoM first then gapps)
Reboot.....wont turn on at all black screen nothing from phone
What am I doing wrong?
Someone please tell me.

Dont format /system. It's not necessary. I do everything you did. Except I Use TWRP... I dont see anything wrong with your process

See and on the first phone I didnt format the system and it bricked so I thought it was because I didnt format the system thats why I did it on my note
Edit: Being a broke college student I can't afford this mistake again. If anyone can help me (specific to this rom) that I'm doing wrong or what may be wrong with my phone that would be awesome.

I did everything right I looked through the rom thread well into 100 pages and nobody has had any issues.
I've never hard bricked any other phone before and I had my original note on another rom as well.
It was only until I used that rom did it hard brick or as far as I know it hard bricked.
Can anybody respond to give me a hint as to what happened?

Post a picture of your note. I want to "see" this device.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Fact of the matter is;
The packaged rom you refer to dose not contain bootloaders. So its really quiet unlikely its hard bricked unless you flash it to a device its not ment for.
The recovery in question is the one I use as well so that also should not cause an issue.
Have you tried a jig? To get back into download mode?
I really want to see this device you own I have a feeling you may be flashing the wrong device files.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Johnsondr80 said:
Fact of the matter is;
The packaged rom you refer to dose not contain bootloaders. So its really quiet unlikely its hard bricked unless you flash it to a device its not ment for.
The recovery in question is the one I use as well so that also should not cause an issue.
Have you tried a jig? To get back into download mode?
I really want to see this device you own I have a feeling you may be flashing the wrong device files.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I do not own a jig right now as I lost mine.
heres pic
http://imgur.com/DkseY
Sorry for bad writing...its late

I know that the device is not booting at all. no vibrate, no sound just a black screen.
I've heard amazing things about the rom hence why I wanna try it. I don't mean any disrespect to any of the rom developers.
I thank you for even responding! I'm pretty sure it's on my end I just wanna find out what.

Dark_lupus said:
I know that the device is not booting at all. no vibrate, no sound just a black screen.
I've heard amazing things about the rom hence why I wanna try it. I don't mean any disrespect to any of the rom developers.
I thank you for even responding! I'm pretty sure it's on my end I just wanna find out what.
Click to expand...
Click to collapse
example of a jig(s): http://www.cellularfactory.com/det.jsp?d=57293&c=658122
http://www.youtube.com/watch?v=5G5sHPPnins
i dont know if this is the one that will work for you but its what you need, if you are hard bricked.. did you try pulling batteries and getting into download mode by holding volume down and power and plugging in usb (all without the battery in device) ?
dont know if it will work but give it a shot.

mejori said:
example of a jig(s): http://www.cellularfactory.com/det.jsp?d=57293&c=658122
http://www.youtube.com/watch?v=5G5sHPPnins
i dont know if this is the one that will work for you but its what you need, if you are hard bricked.. did you try pulling batteries and getting into download mode by holding volume down and power and plugging in usb (all without the battery in device) ?
dont know if it will work but give it a shot.
Click to expand...
Click to collapse
Tried it that way when connected to my computer just kept giving me a you need to format G: etc etc over and over again (multiple windows) until i unplugged it.

Dark_lupus said:
Tried it that way when connected to my computer just kept giving me a you need to format G: etc etc over and over again (multiple windows) until i unplugged it.
Click to expand...
Click to collapse
This statement made me think of something else:
1: What cable did you use?
2: Were both phones bricked while flashing from the same PC?
I ask that, because if your phone is unplugged part way through a bootloader being installed... But you don't have to unplug it, it could be a faulty USB cable or bad PC drivers :/

Ive rooted and romd a ton of devices myself never ever bricked one until I came across this one... i own a jig and no recovery no boot whatsoever my only conclusion as to why this happened to me.. is a while back people were reporting a few certain phones had a "brick bug" there's an actual app to run and check to give you some peace of mind.
Sent from my SAMSUNG-SGH-I717 using xda premium

Snarksneeze said:
This statement made me think of something else:
1: What cable did you use?
2: Were both phones bricked while flashing from the same PC?
I ask that, because if your phone is unplugged part way through a bootloader being installed... But you don't have to unplug it, it could be a faulty USB cable or bad PC drivers :/
Click to expand...
Click to collapse
Used the cable that came with both phones, the old cable for the old phone and the new cable for the new phone
both phones used the same pc.(never had any issue before) Both phones were 100% battery and unplugged while installing the roms though\
Only until after installing the roms did the phone not come back on. (meaning after installing CWM I restarted the phone and it started up fine issue only happened after I installed the rom)
Brick bugs?

So squeezed my way into a replacement.
Scared to try another rom but I think that I will try another one and see if it works. My phone will be here tuesday.
Should I use another computer to do load CWM? Throw some advice as I'm pretty sure this is the last time I can get another phone for a while

Hi... I hard bricked my at&t sgh-i717 in the same way... same rom... same format system... and the phone would not start up, not recovery mode or download mode. I built a jig, that work correctly with the samsung S2, but on the Note no effect :crying:
---------- Post added at 06:14 PM ---------- Previous post was at 06:09 PM ----------
Can I do something to revive my Note?

Dark_lupus said:
So squeezed my way into a replacement.
Scared to try another rom but I think that I will try another one and see if it works. My phone will be here tuesday.
Should I use another computer to do load CWM? Throw some advice as I'm pretty sure this is the last time I can get another phone for a while
Click to expand...
Click to collapse
I bricked a phone and soft bricked a phone and brought it back to normal just recently - The problem that i have is that i actually provide a flashing service to my customers and the guy i had dealt with used samsung kies and downloaded ICS which brings many issues to the table when flashing the easy way. Rather than mess around i decided to go about things the easy way below;
--Enter ODIN mode on i717, Download & Flash the STock Gingerbread 2.3.3 AT&T Rom (which is linked in Da_g's Thread) using ODIN on ur PC i(500MB zip)
--install the DA_G OC root kernel
--then install TWRP.zip via Odin or flash CWM
--then Download and flash Jellbean ROM of your choice / GAPPs. (after you wipe cache x3 and dalvik x3
Make sure you have all the samsung galaxy note drivers installed on your computer... if you are unsure REINSTALL them. Trust me

BigBison420 said:
I bricked a phone and soft bricked a phone and brought it back to normal just recently - The problem that i have is that i actually provide a flashing service to my customers and the guy i had dealt with used samsung kies and downloaded ICS which brings many issues to the table when flashing the easy way. Rather than mess around i decided to go about things the easy way below;
--Enter ODIN mode on i717, Download & Flash the STock Gingerbread 2.3.3 AT&T Rom (which is linked in Da_g's Thread) using ODIN on ur PC i(500MB zip)
--install the DA_G OC root kernel
--then install TWRP.zip via Odin or flash CWM
--then Download and flash Jellbean ROM of your choice / GAPPs. (after you wipe cache x3 and dalvik x3
Make sure you have all the samsung galaxy note drivers installed on your computer... if you are unsure REINSTALL them. Trust me
Click to expand...
Click to collapse
Hi... my note would not power on... so no recovery/download mode... When i plug it to my pc, it's recognized like "qualcom device" or something similar... kies is up to date and the drivers are ok... but Odin is useless :crying:

First rule.
Flash packages built for your device.
Second rule.
Follow install instruction.
If your having problems its one of those that you failed at.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Hi,
First I would like to say thanks for all the hard and awesome work.
I'm a noob/longime lurker, and don't have enough posts to be able to post on the thread itself, hence the PM.
I just wanted to share a suggestion if you can change your naming convention of your download files on the mirror site (or in general).
I had trouble downloading from the main link which kept timing out on me. So I used the dev-host mirror link, which has 4 links, but ended up downloading the wrong ROM. I should've gotten the i747 one (for AT&T) but instead got the i727 one, as I mistakenly thought these were just all different mirror links to the same file.
Long story short, this ended up bricking my phone, which is now getting exchanged at AT&T.
I know this is completely due to my noobness, and lesson learned,
but my suggestion is if you can change the naming convention of the files, (especially on the download mirror) or somehow make the difference in the files more obvious than just the 1 character digit difference located in the middle of the file name.
This may help other soul avoid making the same mistake I did.
Click to expand...
Click to collapse
Please read the zip file name in its entirety.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Johnsondr80 said:
First rule.
Flash packages built for your device.
Second rule.
Follow install instruction.
If your having problems its one of those that you failed at.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Hi Johnsondr80... i flashed the right rom... for the right phone... I have an at&t shg-i717, and i717 was written on the name of the file i flashed... i'm only asking if you could help me to get back my phone... nothing more brother

Related

Help !! My phone is bricked ! No usb Stuck on recovery.

My phone is stuck on the recovery screen with no usb connectivity. I cannot connect to ODIN nor can I get back to the main screen. And before anyone asks YES I HAVE THE CORRECT DRIVERS INSTALLED. My problem is that my phone will no connect to USB AT ALL. I had rooted my phone with an old root method, well I downloaded SGS Kernel Flasher and tried to flash to a new kernel because the fascinate I had wouldnt connect to usb to flash to the new CWM. When I flashed the kernel my phone is now stuck in the recovery screen with no usb so i cannot connect to ODIN. The recovery screen is the stock one. So i was hoping someone here had a ZIP file that I could flash that could at least get me back into the stock rom. Any help in very very appreciated.
I would pull the battery, hold down the volume down button and plug the usb chord in and try to odin back to stock, but it sounds like your phone could have a faulty usb port too
Edit: Also, I'm pretty sure this is in the wrong section of the forum
Sent from my MIUI'd Fascinate
Pull the battery..and do the usb cord and volume trick to get into download mode.. or have you tried that AFTER the whole stuck in recovery bit? Maybe I didn't read your post right.
Edit: damnit manic lol, beat me to it
[Neuman]
SCH-I500 - EC09 Radio/MIUI FascinateMTD/Glitch V11.1 LL @1.2ghz -100mv/DarkWhite
Yes you are correct. My usb port doesnt work at all. I was hoping for the 2.2.2 update.zip file so i could flash it using stock recovery.
Let me get this correct you are in samsung's stock recovery looking for a OTA zip? And if so what one you looking for ED01, i assume
Im looking for the a zip file that will take me back to stock and will also work with stock recovery. I dont really care which one. I just need to get back to a working phone. And yes I am stuck in the recovery screen. When it trys to go through the normal boot process it just takes me straight back to recovery. I have tried doing the factory data reset and it takes me right back again to the recovery screen with no OS loaded on it.
This might help if you are trying to get ED01
http://forum.xda-developers.com/showthread.php?t=1044474
Man no usb, no odin, no good
There has to be a way to do this without usb or odin........
I tried flashing the one you just gave me in the post and it gives me an error code 2
I assuming that the kernel you flashed was a voodoo kernel? That might be the issue too. If it converted Odin is the way out. I don't know why they don't just make phones boot from sd card like the Nook Color. Man that would be nice. Just a thought, did you try to place a cwm update zip on the root of your sd card and try using stock recovery to access cwm? Then flashing a rom. I have never tried that with fascinate but i know it worked with the droid eris I had.
jdellingson7 said:
Just a thought, did you try to place a cwm update zip on the root of your sd card and try using stock recovery to access cwm? Then flashing a rom. I have never tried that with fascinate but i know it worked with the droid eris I had.
Click to expand...
Click to collapse
Definitely try this. So is your usb "fried" or actually broken?
you could have spent 3 seconds and looked for this thread http://forum.xda-developers.com/showthread.php?t=1124391
sfd0124 said:
you could have spent 3 seconds and looked for this thread http://forum.xda-developers.com/showthread.php?t=1124391
Click to expand...
Click to collapse
you could have spent three seconds and read this thread. he can't odin because his usb port is busted
try putting this on the root of your sd card: http://www.megaupload.com/?d=OLKZRCE9
it should take you to cwm after you hit "apply /sdcard/update.zip". from there you should be able to flash a stock or custom touchwiz-based rom (i.e. CommRom 2.1), and from there, who knows?
following instructions is a vital part of making sure things pan out like they should. My first observation is that you cant do that...WRONG SECTION brah
This does not belong in dev section.
FWIW, I had issues with my usb port as well. Ultimately the port failed completely and I had to have it replaced. If you google "samsung fascinate usb port replacement" you will find two companies that do this work for $40 or $50 bucks respectively.
My port started getting wonky several months after I got the phone. Cleaning the contacts with a piece of card stock dampened with isopropyl alcohol helped for a while. Then it went completely dead usb wise and only charging would work. Looking into the port, I could see that two of the contacts were separated from the tab and pushed to the back of the port recess. I suspect that non-oem cables I used started the ball rolling.
Verizon would not cover it under the warranty because it was "physical damage".
I tried unsuccessfully to find a way to restore back to stock without Odin, afaik there ain't one. I recommend replacement of the port if you suspect physical damage and then use only oem cables.
dfgas said:
This does not belong in dev section.
Click to expand...
Click to collapse
And this is why I hardly look at xda anymore. So annoyig to read this over and over and over and over and over and over.
Hey can anyone tell me did this get posted in the wrong section... Idt the OP is aware of that... Just help the man for christs sake I mean does it really matter that much... Do ppl need 2 punch holes through their wall cuz someone posted in the wrong section.... Im sure this is part of the reason adrenaline and jt r gone
Sent from my SCH-I500 using XDA App

Galaxy S III Hard Bricked??

Hey gang,
Got my hands on a brand new S III yesterday and of course jumped straight to rooting it.
The root went fine and CWM was working beautifully. I copied the .zip file for Blackstar rom onto the internal SD card and rebooted into recovery. After running the data wipe/factory reset option as per usual, I used CWM Recovery to install the .zip I copied. It began to to it's thing and then encountered an error. This worried me for obvious reasons, so I factory reset it again and rebooted it with the command in recovery.
Which brings us to now:
The phone is completely non responsive. The computer recognizes it as QHSUSB_DLOAD but Odin doesn't recognize it at all.
The device itself stays cold. No screen. No indicator lights. No vibration.
I cannot boot into CWM or Download mode.
Any helpful ideas, or am I buggered on this one?
Thanks,
Shaiden
Probably won't work but did you try a battery pull? But judging from the info you gave you probably are bricked beyond repair . Your best bet is hope insurance (If you have insurance on the phone) will replace it.
Sent from my SCH-I535 using xda premium
shimp208 said:
Probably won't work but did you try a battery pull? But judging from the info you gave you probably are bricked beyond repair . Your best bet is hope insurance (If you have insurance on the phone) will replace it.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Sorry, forgot to mention that. I did indeed attempt the good old battery pull.
Contemplating trying a usb jig on it, but I'm none too hopeful at this point.
The jig is your only hope at this point.
Should it not work, you'll need to pay around 20 bucks in a phone repair shop (if any are around) to have the device JTAG'ed so it will go to Download mode again.
Make sure your Jig is "good". There are a lot of cheap jigs on Ebay which worked on the S1 and partially the S2 but no longer on the S3 since they
do not have the exact resistance needed to trigger the mode (301kOhm)
You could theoretically claim it to be a malfunctioning Kies upgrade (they seem to sometimes not only cause soft- but also hardbricks) but that would be fraud.
Might be a stupid Q on my part but is it a US/Canadian S3(dual core) version or the international(quad core) as if youve flashed a rom for the wrong version u have bricked it.
Shaiden said:
Hey gang,
Got my hands on a brand new S III yesterday and of course jumped straight to rooting it.
The root went fine and CWM was working beautifully. I copied the .zip file for Blackstar rom onto the internal SD card and rebooted into recovery. After running the data wipe/factory reset option as per usual, I used CWM Recovery to install the .zip I copied. It began to to it's thing and then encountered an error. This worried me for obvious reasons, so I factory reset it again and rebooted it with the command in recovery.
Which brings us to now:
The phone is completely non responsive. The computer recognizes it as QHSUSB_DLOAD but Odin doesn't recognize it at all.
The device itself stays cold. No screen. No indicator lights. No vibration.
I cannot boot into CWM or Download mode.
Any helpful ideas, or am I buggered on this one?
Thanks,
Shaiden
Click to expand...
Click to collapse
Shaiden said:
Hey gang,
Got my hands on a brand new S III yesterday and of course jumped straight to rooting it.
The root went fine and CWM was working beautifully. I copied the .zip file for Blackstar rom onto the internal SD card and rebooted into recovery. After running the data wipe/factory reset option as per usual, I used CWM Recovery to install the .zip I copied. It began to to it's thing and then encountered an error. This worried me for obvious reasons, so I factory reset it again and rebooted it with the command in recovery.
Which brings us to now:
The phone is completely non responsive. The computer recognizes it as QHSUSB_DLOAD but Odin doesn't recognize it at all.
The device itself stays cold. No screen. No indicator lights. No vibration.
I cannot boot into CWM or Download mode.
Any helpful ideas, or am I buggered on this one?
Thanks,
Shaiden
Click to expand...
Click to collapse
What's your model number? Maybe U flashed the wrong rom.
Sent from my GT-I9000(maybe I9300) using Tapatalk 2
SwiftSmoke said:
Might be a stupid Q on my part but is it a US/Canadian S3(dual core) version or the international(quad core) as if youve flashed a rom for the wrong version u have bricked it.
Click to expand...
Click to collapse
It is indeed the North American dual-core model.
And I may have done just that. I admittedly did't check to see which configuration the ROM was meant for.
Shaiden said:
It is indeed the North American dual-core model.
And I may have done just that. I admittedly did't check to see which configuration the ROM was meant for.
Click to expand...
Click to collapse
you should have taken more care in reading stuffs rather than flashing.
Coming from iOS, "brick" isn't really brick. It's just the user doesn't know what to do, but completely fixable.
Being new to Android, over a month in but stock. I didn't know you could literally "brick" a phone. Interesting.
Shaiden said:
It is indeed the North American dual-core model.
And I may have done just that. I admittedly did't check to see which configuration the ROM was meant for.
Click to expand...
Click to collapse
'QHSUSB_DLOAD' means CPU is Qualcom.. so is not international S3 and Blackstar is for international ... hence the BRICK... send back to Samsung...cook a story. All the Best.
Within North America rooting won't void your warranty but in other countries on the international market you do void it that's why I don't root. I don't know what story you will come up with to make it fly but hey best of luck to you sir.
Buy yourself this jig dongle,
http://item.mobileweb.ebay.com/viewitem?itemId=300738858103&index=2&nav=SEARCH&nid=76910404095
If doesn't work buy yourself a new phone...
Sent from my GT-I9300 using xda premium

[Q] SGH-I777 Bricked !!! Help

Hello everybody, I'm new in this community. Well I just bricked last week my S2 SGH-I777 when i tried to flash Siyah v3.5.1 from ROM Manager, then the phone never comes back to life. Now im trying to reboot using jtag method with Riff box and Medusa. Question is if somebody has deal with same kind of problem and plz could give me a couple of tips of what to do to resurrecting my SGS2 SGH-I777?
Thanks in advance.
jdpardo said:
hello everybody, i'm new in this community. Well i just bricked last week my s2 sgh-i777 when i tried to flash siyah v3.5.1 from rom manager, then the phone never comes back to life. Now im trying to reboot using jtag method with riff box and medusa. Question is if somebody has deal with same kind of problem and plz could give me a couple of tips of what to do to resurrecting my sgs2 sgh-i777?
Thanks in advance.
Click to expand...
Click to collapse
oh hurray rom manager!
....
Sent from Team Pirate
122ninjas said:
oh hurray rom manager!
Click to expand...
Click to collapse
HAHAHAHAHHA!! After I bumped my link, this is getting old
---------- Post added at 12:16 PM ---------- Previous post was at 12:12 PM ----------
jdpardo said:
Hello everybody, I'm new in this community. Well I just bricked last week my S2 SGH-I777 when i tried to flash Siyah v3.5.1 from ROM Manager, then the phone never comes back to life. Now im trying to reboot using jtag method with Riff box and Medusa. Question is if somebody has deal with same kind of problem and plz could give me a couple of tips of what to do to resurrecting my SGS2 SGH-I777?
Thanks in advance.
Click to expand...
Click to collapse
Honestly I want to help you buddy, but because you neglacted to read anything before you did this, this is your fault!
Yep very old. I cant believe that Koush hasnt figured something out for this yet. He fails too. CyanogenMod has always pushed ROM Manager, even tho most devs state not to use it.
OP: Get into download mode, and flash another, PROPER, kernel with ODIN or Heimdall.
Then use CWM to flash things.
I's in good mood today?
Well thanks anyway; hope to find a solution and post it. I know it was my fault so lwts move on its part of the experience in Android World.
jdpardo said:
Well thanks anyway; hope to find a solution and post it. I know it was my fault so lwts move on its part of the experience in Android World.
Click to expand...
Click to collapse
The post above you gave you the solution...
122ninjas said:
The post above you gave you the solution...
Click to expand...
Click to collapse
True.
@jdpardo,
If you can get into download mode, or have any sign of life from your phone, then it is not a brick, and you should be able to recover. Please let us know if you can get into download mode, and more help will be forthcoming.
creepyncrawly said:
True.
@jdpardo,
If you can get into download mode, or have any sign of life from your phone, then it is not a brick, and you should be able to recover. Please let us know if you can get into download mode, and more help will be forthcoming.
Click to expand...
Click to collapse
Thanks man, well my phone is hard bricked because is dead, i can't get into download mode, even turn it on; in this moment im trying to get ino it by jtag method using riffbox or medusa. It seems that is the only way to return to life. forum.gsmhosting.com
jdpardo said:
Thanks man, well my phone is hard bricked because is dead, i can't get into download mode, even turn it on; in this moment im trying to get ino it by jtag method using riffbox or medusa. It seems that is the only way to return to life. forum.gsmhosting.com
Click to expand...
Click to collapse
Wish you good luck with that. Jtag takes a fair amount of dexterity for the micro soldering, and some fairly expensive equipment. If you are unable to get it done yourself, the owner of Mobile Tech Videos will perform Jtag recovery for about $50.00.
I sincerely hope you know that the method for getting into download mode on I777 is to take out the battery, plug normal portion of USB into computer already running Odin, then hold both volume buttons and plug in micro USB side to phone.
If that really does nothing for you, then try mobile tech videos.
i777 soft bricked, boot loop never goes away...
I bricked my samsung galaxy s2 i777 by trying to flash a rom via rom manager. While it was installing it, it rebooted and got stock on boot loop.
It can go into download mode but never to recovery or beyond.
I tried every solution recommended out there, like flashing stock kernel, stock rom, different roms, siyah kernel, oneclick unbrick, and you name it. I tied ADB but it does not recognize the device, nor does oneclick unbrick.
Somehow I need to go ahead and wipe everything but since I cannot get to recovery, I cannot wipe it, and every time I flash something via Odin, it goes through the whole process successfully however once it reboots after flashing, it is in bootloop again. All I see is samsung galaxy sII logo window.
Any solutions?
Thanks!
creepyncrawly said:
True.
@jdpardo,
If you can get into download mode, or have any sign of life from your phone, then it is not a brick, and you should be able to recover. Please let us know if you can get into download mode, and more help will be forthcoming.
Click to expand...
Click to collapse
koksalcengiz said:
I bricked my samsung galaxy s2 i777 by trying to flash a rom via rom manager. While it was installing it, it rebooted and got stock on boot loop.
It can go into download mode but never to recovery or beyond.
I tried every solution recommended out there, like flashing stock kernel, stock rom, different roms, siyah kernel, oneclick unbrick, and you name it. I tied ADB but it does not recognize the device, nor does oneclick unbrick.
Somehow I need to go ahead and wipe everything but since I cannot get to recovery, I cannot wipe it, and every time I flash something via Odin, it goes through the whole process successfully however once it reboots after flashing, it is in bootloop again. All I see is samsung galaxy sII logo window.
Any solutions?
Thanks!
Click to expand...
Click to collapse
After odin go into recovery and factory reset. (6) recovery is both volumes and power held together with no usb plugged in. Hold the buttons forever
Sent from Team Pirate's Transmitter Thingy
Rom Manager Fail
Team Pirate
Sent from Pirateghost's house
koksalcengiz said:
I bricked my samsung galaxy s2 i777 by trying to flash a rom via rom manager. While it was installing it, it rebooted and got stock on boot loop.
It can go into download mode but never to recovery or beyond.
I tried every solution recommended out there, like flashing stock kernel, stock rom, different roms, siyah kernel, oneclick unbrick, and you name it. I tied ADB but it does not recognize the device, nor does oneclick unbrick.
Somehow I need to go ahead and wipe everything but since I cannot get to recovery, I cannot wipe it, and every time I flash something via Odin, it goes through the whole process successfully however once it reboots after flashing, it is in bootloop again. All I see is samsung galaxy sII logo window.
Any solutions?
Thanks!
Click to expand...
Click to collapse
122ninjas said:
After odin go into recovery and factory reset. (6) recovery is both volumes and power held together with no usb plugged in. Hold the buttons forever
Sent from Team Pirate's Transmitter Thingy
Click to expand...
Click to collapse
This. Do u have the android sdk installed, and the drivers for the i777 installed? You'll need those plus usb debugging already enabled to use ADB. (if u went the ADB route)
Sent from T.P. Secret Underground Base .
122ninjas said:
After odin go into recovery and factory reset. (6) recovery is both volumes and power held together with no usb plugged in. Hold the buttons forever
Sent from Team Pirate's Transmitter Thingy
Click to expand...
Click to collapse
Something went wrong flashing AOKP from AoCP, bootlooped and I thought I could fix it, didn't realize I had to hold the buttons FOREVER, worked, thanks man
A simple way to get the i777 into download mode:
unplug the usb cable
turn the phone off
hold only the volume down button
insert usb cord
Almost instant download mode.
this really will help you
jdpardo said:
Hello everybody, I'm new in this community. Well I just bricked last week my S2 SGH-I777 when i tried to flash Siyah v3.5.1 from ROM Manager, then the phone never comes back to life. Now im trying to reboot using jtag method with Riff box and Medusa. Question is if somebody has deal with same kind of problem and plz could give me a couple of tips of what to do to resurrecting my SGS2 SGH-I777?
Thanks in advance.
Click to expand...
Click to collapse
This video will show you how to un brick your galaxy S2-i777
write this in the Google search bar "Fix my S2-I777" watch the first video and good luck :good:
Joseph,
Are you going to link everyone to that video you just posted?
The information is already listed in the stickies.
Sent from my SGH-I777 using xda premium
Don't post that video anymore. Also, DO NOT USE THAT VIDEO!
I'm not saying it won't work, but the fact that you've got a file from gs2root shows your inexperience and/or lack of concern for the well-being of others devices. There is no reason to take the risk of using ANYTHING from gs2root... you can get everything needed to do everything possible with this device right here from xda and have the peace of mind that it will work as expected so long as you follow the instructions.
Clay
Team Pirate
Sent from my PINK GSwagger2

[Q] Non-Responsive Touchscree & ODIN Won't Flash

Ok, I flashed the experimental 4.2.1 update from temasek earlier. flashed his custom kernel. all worked fine.
Told me my SD Card was 'damaged', which I now understand just needed a fix which was provided. However I decided to just forget it and restore my nandroid backup i'd taken the previous night.
Checked the folder was there, which it was, so booted to CWM, did all the wipes and chose "restore". much to my horror, it failed to find any files.
stupid mistake part: i decided to flash the perseus kernel back over the top to see if the CWM would recognise my nandroid files and restore them
the screen just went mad - had blue lines all over the place, the samsung logo jumped about and the screen went off.
i booted back to CWM and found the touchscreen was unresponsive. everything else worked - buttons, CWM. The phone is also recognised in ODIN, so I grabbed the latest stock JB leak and flashed it. it flashed fine, but it was a middle eastern rom, which didn't help, and the touchscreen was still dead.
the PC still recognised it, so i coped the temasek files back on to see if i could re-flash those, which i did, but still no luck with the touchscreen.
flashed the JB leak again with ODIN, which worked. plugged it in to the PC and copied across a nandroid backup folder i'd taken earlier in the evening last night, since the other one seems to not work. rebooted and it still wouldn't find it.
Now i've got the latest stock rom for the uk but ODIN just won't flash anything - the phone is recognised, the MD5 sum on the rom checks out but i always get "Complete(Write) operation failed" error each time. I plug the phone in to the PC, and it recognises it just fine, but KIES is sitting on the "connecting" screen and not doing anything - i've reinstalled the latest drivers as well.
I'm starting to be resigned to the fact i've killed it, but if anyone has any ideas, i'd be hugely grateful - thankyou
touchscreen dead is getting more and more common. Not sure what is going on but if u cant flash anything from odin maybe u have dead mmc chip or something. Hopefully you resolve it or a trip to sammy service centre hopefully can fix under warranty for u
Edit close down all kies software whilst using odin
Sent from my GT-I9300 using XDA Premium HD app
i dont have warranty as the phone was bought second hand.
i'm just on the phone to my insurance providers though for accidental damage ..it might mean i have to drop it downstairs though !
ooeerr .. rebooted my PC, reconnected to ODIN and it's flashing the UK Stock ROM i got .. fingers crossed. I really don't want to have to drop it downstairs. The insurers will want to inspect it and if there's a custom rom on it, it might get bounced
hankhandsome said:
Ok, I flashed the experimental 4.2.1 update from temasek earlier. flashed his custom kernel. all worked fine.
Told me my SD Card was 'damaged', which I now understand just needed a fix which was provided. However I decided to just forget it and restore my nandroid backup i'd taken the previous night.
Checked the folder was there, which it was, so booted to CWM, did all the wipes and chose "restore". much to my horror, it failed to find any files.
stupid mistake part: i decided to flash the perseus kernel back over the top to see if the CWM would recognise my nandroid files and restore them
the screen just went mad - had blue lines all over the place, the samsung logo jumped about and the screen went off.
i booted back to CWM and found the touchscreen was unresponsive. everything else worked - buttons, CWM. The phone is also recognised in ODIN, so I grabbed the latest stock JB leak and flashed it. it flashed fine, but it was a middle eastern rom, which didn't help, and the touchscreen was still dead.
the PC still recognised it, so i coped the temasek files back on to see if i could re-flash those, which i did, but still no luck with the touchscreen.
flashed the JB leak again with ODIN, which worked. plugged it in to the PC and copied across a nandroid backup folder i'd taken earlier in the evening last night, since the other one seems to not work. rebooted and it still wouldn't find it.
Now i've got the latest stock rom for the uk but ODIN just won't flash anything - the phone is recognised, the MD5 sum on the rom checks out but i always get "Complete(Write) operation failed" error each time. I plug the phone in to the PC, and it recognises it just fine, but KIES is sitting on the "connecting" screen and not doing anything - i've reinstalled the latest drivers as well.
I'm starting to be resigned to the fact i've killed it, but if anyone has any ideas, i'd be hugely grateful - thankyou
Click to expand...
Click to collapse
unfortunately your touchscreen died and your only option is to bring it for warranty because of the bad flash, if you have warranty i suggest follow my simple guide here.
http://forum.xda-developers.com/showthread.php?t=2074756
---------- Post added at 01:52 PM ---------- Previous post was at 01:49 PM ----------
hankhandsome said:
i dont have warranty as the phone was bought second hand.
i'm just on the phone to my insurance providers though for accidental damage ..it might mean i have to drop it downstairs though !
ooeerr .. rebooted my PC, reconnected to ODIN and it's flashing the UK Stock ROM i got .. fingers crossed. I really don't want to have to drop it downstairs. The insurers will want to inspect it and if there's a custom rom on it, it might get bounced
Click to expand...
Click to collapse
still follow the guide so the insurance will not detect that you have been rooted before
chris151722 said:
still follow the guide so the insurance will not detect that you have been rooted before
Click to expand...
Click to collapse
i'll see what i can do but it's now stuck in a bootloop after flashing the rom i grabbed earlier, so will try another one.
i might have to kill it stone dead if none of this works
each rom i try in ODIN never boots - just goes into a bootloop.
i suppose if the insurers do inspect it, they may well not be able to get to see the flash counter if they can't boot it up - so it'll have a stock, unrooted rom on it anyway, so does anyone think i'll be ok ?
hankhandsome said:
i'll see what i can do but it's now stuck in a bootloop after flashing the rom i grabbed earlier, so will try another one.
i might have to kill it stone dead if none of this works
Click to expand...
Click to collapse
after you flash stock firmware go to recovery try to factory reset
---------- Post added at 02:15 PM ---------- Previous post was at 02:11 PM ----------
Ausboy 2011 said:
touchscreen dead is getting more and more common. Not sure what is going on but if u cant flash anything from odin maybe u have dead mmc chip or something. Hopefully you resolve it or a trip to sammy service centre hopefully can fix under warranty for u
Edit close down all kies software whilst using odin
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
its a bad flash from odin and bad flash thru phone the reason why touch is dying.
chris151722 said:
its a bad flash
Click to expand...
Click to collapse
every rom though ?
just tried another one and it's bootlooping ..
hankhandsome said:
every rom though ?
just tried another one and it's bootlooping ..
Click to expand...
Click to collapse
can you access recovery mode? if so try to wipes or factory reset before and after firmware flash
chris151722 said:
can you access recovery mode? if so try to wipes or factory reset before and after firmware flash
Click to expand...
Click to collapse
at the moment i can't access anything - it just sits at the samsung logo now. CWM is now no longer accessible either - i pop the battery, wait a few minutes then put it back in. I hold down Up/Power/Middle button and the Samsung Logo flashes, but nothing happens.
I can still put it in to download mode and flash roms with odin, but nothing happens .. i think i'm going to have to accept it's dead
My last roll of the dice is to grab one of the earlier roms from this thread
http://forum.xda-developers.com/showthread.php?t=1835931
and see what that does in ODIN
FYI:
1. you don't have to wipe anything before restoring a backup, it doesn't make a difference.
2. insurance fraud is a felony
Glebun said:
FYI: 2. insurance fraud is a felony
Click to expand...
Click to collapse
Good job i don't live in the US then ..
I'm pretty sure it's illegal no matter where you live
Well I don't particularly want to get into an argument here, as i'd much prefer a phone that works so i'll just thank you for your input.
i think you have to solve the bootloop issue first by searching in the forum, im not expert so cant give you better advice on bootloop,
chris151722 said:
i think you have to solve the bootloop issue first by searching in the forum, im not expert so cant give you better advice on bootloop,
Click to expand...
Click to collapse
thanks. it doesn't actually bootloop now, it just sits on the glowing samsung logo and doesn't move.
i just want to get a stock rom back on it and i'm going to just let it go. i'm a bit concerned that on the download screen it says "Custom Binary Download: Yes (19 Counts)". I know I did reset the flash counter not too long ago before I flashed the Darky Rom, so if this is indeed the flash counter, then i've obviously not done something right, so it'll show multiple flashes ..
ok, we've had developments ..
i actually got it in to CWM (don't know how..) and did a factory reset. it then did boot up into the OS but - no touchscreen still.
however, i've just tried connecting it to KIES and it's detected it so i'm going to try the emergency recovery thing ..
he says, as he selects the option and KIES then goes back to "connecting" .. *GROAN* .. and then comes back to tell me it's not supported to upgrade firmware via KIES .. *BIGGER GROAN*
Ok, downloaded and flashed an earlier rom for the UK but still no luck with the screen. Kies won't do any kind of emergency firmware upgrade either so that's that. i'll have to try and get one of those OTG USB dongles so i can get the flash counter reset though ..
hankhandsome said:
Ok, downloaded and flashed an earlier rom for the UK but still no luck with the screen. Kies won't do any kind of emergency firmware upgrade either so that's that. i'll have to try and get one of those OTG USB dongles so i can get the flash counter reset though ..
Click to expand...
Click to collapse
Does not reset flash counter only allows access to download mode. Traingle Away to reset flash counter .
jje
JJEgan said:
Does not reset flash counter only allows access to download mode. Traingle Away to reset flash counter .
jje
Click to expand...
Click to collapse
i'm aware of that - that's why I've ordered the OTG dongle so I can use my desktop mouse to go in and install triangle away

[Q] SGH-i717 Home Keys not working

Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick

Categories

Resources