Hi there,
Is there a way to run iGO Primo in the background with screen off?
I want to be able to lock the screen, put the phone in my pocket and just listen to the vocal instructions. At the moment iGO gets suspended after ~ 1 hour. When I unlock the phone and click the iGO icon in the notifications page, it restarts.
I tried some settings in [power] section of the sys.ini but with no luck. I also tried an app to keep the GPS module alive, nog (although I think iGO should have complained about 'gps sigmal lost').
Any clues, please?
Thank you
Problem solved.
It was the deep sleep mode that was choking iGO after a while.
Not for all...
Not so fast... In devices such 2din "pure" android, when the iGO goes to background (eg. by pressing the home button or at BT phone call), then you'll listen: "GPS signal lost..."
And "bye bye" speedcam alerts...
Any clue?
not bye bye ......
[android]
show_status_bar=1
fullscreen=1
tablet=1
has_physical_home_button=1
create_sdcard_dir=0
upside_down_bug=1
navigation_audio_stream = 4
background_shutdown_timeout=0
background_navigation_enabled=1
Related
Anyone tried this app yet? It seems to be able to do... um... everything?! Ha! I am interested to see what custom profiles and tasks people have set up in theirs!
http://lifehacker.com/5599116/how-to-turn-your-android-phone-into-a-fully+automated-superphone
http://lifehacker.com/5601133/push-...d-to-awesome-heights-with-these-tasker-setups
You can download a 14-day trial from the developers website:
http://tasker.dinglisch.net/download.html
(it is £3.99 in the market for the full version)
Wow, I would have normally glazed right over this. For some reason I read the articles and this is pretty cool. I started thinking of a bunch of uses for it. I bought it outright. Thanks for the post, moonrock!
Welcome!
I noticed in the wiki or forum (somewhere!) that they were able to set up a profile that remapped the camera button -- I am wondering if this can be used to remap the power button while the camera app is open, maybe?
So I haven't had much time to play with Tasker, but the two scripts I have currently running:
* Silence from 11pm > 8am, simple, but it replaced the other 'profiles' type apps
* Disable screen rotation when in the Kindle app, for whatever reason this isn't an option in the Kindle app itself.
I have it set to turn on my Bluetooth when plugged in and off when unplugged works great!
Sent from my SGH-T959 using XDA App
Fantastic! I need to set up a (again, simple!) task that will turn on bluetooth in the times that I am always in my car (commute to work and home, same time every day) which won't be difficult.
I have Locale already, but this may replace it (gotta love paying for apps to find out another one does 10000x more things! oops!) I've had Locale since first getting my G1 though, so it's gotten plenty of use.
So glad you posted about this app... its amazing..
18. 4009
Sent from my Samsung vibrant.
I have a couple tasks set up. First, I have gps automatically turn on and off when entering and exiting google maps. I also have one that lets me pick input style when I go into or leave remotedroid (swype's backspace doesn't work in it). And I have a couple apps that like to hang around after I close them, so I set them to be killed upon closing.
All in all it's a great app, well worth the $6.
Sent from my Vibrant using XDA app
Also worth noting is that it is £3.49 from the developer directly (paypal, via his website) and a larger % goes direct to him that way.
I have it setup for text to speech on SMS messages when my phone connects to my cars bluetooth.
I am trying to find a way to let my replay to said SMS with the voice to text feature or just ignore it. Anyone have any idea how to accomplish that?
Also think it would be cool to have it change my wallpaper based on the weather conditions in my area, but Im not sure how to go about doing that either.
ritalin said:
Also think it would be cool to have it change my wallpaper based on the weather conditions in my area, but Im not sure how to go about doing that either.
Click to expand...
Click to collapse
Beautiful Widgets (paid app, couple bucks) and the (free) Beautiful Live Wallpaper. Uses the weather widget to make the wallpaper match the weather
Tasks that I've set up so far:
Silent / dim screen / timeout / alarm volume 7 while I am asleep (timed task)
Vibrate / auto brightness / timeout (slightly longer) while at work (timed task)
Bluetooth on while in my car (timed task -- specificlly during the hours of my work commute)
Load Vlingo when Bluetooth connects, Kill Vlingo when BT disconnects
GPS on when Maps, Navigation and Foursquare are opened
Display timeout (1hr) and brightness (max) when USB plugged in (for when i am in my car, typically listening to music and/or have vlingo up on the screen, annoying (and worthless) for the display to timeout if vlingo is supposed to be a one-touch process!)
Anyway of exporting a profile then importing it so some of the more advanced useres can create some and we can tweak them ?
Edit: Having hard time getting them to do what i want .
Probably, but I am not entirely sure how... lol
My initial use:
As previously mentioned on this board the bluetooth streaming volume is not the loudest, so I always end up turning up the volume for bluetooth. Then when I plugin my headphones I destroy my eardrums.
So I setup a task that when I connect to my bluetooth car stereo, it automatically sets the volume to max and turns off wifi for good measure.
I have another task that when I plugin headphones, it sets the volume to 60% and opens the doubletwist music player.
Finally I setup the standard battery task so that when my battery gets to 20% it turns of all the GPS, wifi, and bluetooth radios, as well as dimming my screen.
Shane_pcs said:
My initial use:
As previously mentioned on this board the bluetooth streaming volume is not the loudest, so I always end up turning up the volume for bluetooth. Then when I plugin my headphones I destroy my eardrums.
So I setup a task that when I connect to my bluetooth car stereo, it automatically sets the volume to max and turns off wifi for good measure.
I have another task that when I plugin headphones, it sets the volume to 60% and opens the doubletwist music player.
Finally I setup the standard battery task so that when my battery gets to 20% it turns of all the GPS, wifi, and bluetooth radios, as well as dimming my screen.
Click to expand...
Click to collapse
Ah, I keep meaning to setup the low battery task as well!
I have two keyboards i really like in 2 different orientations.
Droid X keyboard:
its sweet autocorrections and large real estate makes it ideal for two thumb typing in landscape
swype:
slower than droid X keyboard in landscape, but in portrait, this is possibly the fastest/most accurate keyboard around.
I tried to set it up so that i could change my keyboards depending on the orientation, but i could not figure it out
im also for an app that turns your screen off with a timer (in the background). and have that work when you turn your screen downward./
any with either of these would be greatly appreciated.
Anyone know how to make it so that the Incall volume goes up to max on the connect of the phone call? I cant seem to find it in the settings meeting seems to only answer on 3/4 volume. Thought Tasker might be able to .
This app is awesome. I only got a few tasks setup but one nice one is turning the screen timeout to 23hr when I open the web browser and back to 30 secs when I exit.
talltexan said:
Anyway of exporting a profile then importing it so some of the more advanced useres can create some and we can tweak them ?
Edit: Having hard time getting them to do what i want .
Click to expand...
Click to collapse
To export a profile tap the context (left) icon <profile<export. To import just open the file with Tasker as the chosen program I think. lots of premade tasks on the Tasker wiki. (it won't let me post a link)
Hi,
my new archos 101 often cannot wake up after sleep (deep sleep or screen timeout).
tried many methods: wifi disabled, battery booster, flight mode, sounds disabled... no luck.
i installed new fw, 2.1.8 and arctool with markets and google app and some games.
uninstalling maps and disabling wifi location didnt help. whats strange, is that sometimes screen turn on after 30s+ seconds..
i am new, but is there any way to check what's a process blocking it?
write to logs or connect via usb and check?
help very much appreciated
I'm having the same problem...
I just keep pressing the on/off button until the screen turns on. Didn't find a fix yet.
>>> i installed new fw, 2.1.8 and arctool with markets and google app and some games.
those were my 1st steps with archos, so dont know if it works in previous firmware.
right now, i dont want to do hard reset.
There is allready a discussion about this.
It seems that after the press, the archos is waking up, but the displaylight itself doesn't come up.
If you switch the display to abough 30% ( Settings/Display ) this doesn't happen again.
NOT kidding: the Archos has trouble turning on when cold. Try warming it on the radiator if its <15 degrees celcius.
Sent from my GT-I9000 using XDA App
success!
turned out, it is TRUE... 30% solved it!
btw, pretty ridiculous bug..
fzelle said:
There is allready a discussion about this.
It seems that after the press, the archos is waking up, but the displaylight itself doesn't come up.
If you switch the display to abough 30% ( Settings/Display ) this doesn't happen again.
Click to expand...
Click to collapse
30% of what? Increased brightness? I went to settings/display and couldn't find percentage level
As i don't have an english version, i can't tell you what you should read there,
but which other setting in display has percentages?
no % displayed, but just set if for 1/3 of the progress bar.
Jeezus, i cant believe it, but i can confirm that it's a brightness setting issue. It's so ridiculous but it's true. I have been frantically trying to find a solution to this problem for the past 30 mins, and turning the brightness setting to 40% worked to restore the screen after the soft sleep mode, when previously i had to keep rebooting the damn thing by longpressing the power button. THANKS A MILLION, GUYS!
Ohh i see i am not alone = ]
Thank you for the Workaround!
Sent from my A101IT using Tapatalk
Hello,
I am running a gTab with TNT Lite 4.4 and Launcher Pro. I like the setup very much (thanks to all the help found here), but am having problems trying to find an alarm clock app I can set up the way I like.
Ideally, I want an alarm that will open Pandora at a specified time. Barring that, I'd be happy with an app that started the alarm from sleep mode. I don't like leaving the display on all night, even if it's in the "dim" or "night mode". However, it seems that the minute I put the gTab to sleep, the clock stops ticking and the alarm doesn't go off until you wake up the device (the wake updates the clock to the actual time).
Am I nuts, or is there some kind of bug? Are there alarms that will wake up the tablet from sleep? So far I've tried "Alarm Clock Plus" and "AppAlarm Pro" without success.
Am I nuts, or is there some kind of bug? Are there alarms that will wake up the tablet from sleep? So far I've tried "Alarm Clock Plus" and "AppAlarm Pro" without success.
Click to expand...
Click to collapse
This is a bug without doubt - what is the point of an alarm that
you have to turn on
YOu might try some of those keepalive programs in the market, but
my experience is that, like most android apps (and android itself
for that matter), they don't really work perfectly.
Here's what I've come up with so far. It seems to be working, although with some caveats.
I installed "Load Monitor" and enabled what they call "Wake Lock" which, according to the FAQ, prevents the tablet from going into a deep sleep. It seems to allow the clock to keep accurate time while screen is off. It also might help people's WiFi issues. I don't know the effect on battery life, but plugging it in while it's on the nightstand isn't a problem.
I've found that Pandora needs to be closed, not paused. Sometimes it'll work when paused, but not always.
I would be happy to hear anyone else suggestions as I'm certainly disappointed in how this is working.
EDIT: Also, you need to have the volume turned up loud enough manually. If you let the app set the volume, it's never loud enough.
App alarm pro is what I use on my phone. It can restart the app if you were using the night before. I use it to wake to Howard on the Sirius XM app and the developer is friendly and responsive. I haven't tried it on the gtab yet as my night stand isn't that big!
I've installed and used the IMobs Battery Callibration App (see how-to and play store
Short description: i have run the calibration, and now some apps are not triggered to run, e.g. the alarm doesn't off.
I have run the 'long' calibration, where it cycles through every single app to do something about their battery use. Now I've a problem with some apps. It seems all to do with that the apps do not wake up/start when triggered, or do start but are suppressed quickly. I've tried to find a solution on this forum, but didn't find it.
example 1 alarm doesn't ring: e.g. an alarm is set for 6 a.m. to wake up. At 6 a.m. the phone wakes up, sometimes in a flash the click/alarm view is visible for a moment and it immediately disappears. The alarm does not sound (or only available fraction of a second).
Note: I have noticed that after reboot the ringing is triggered, but after some time (say 1 day or maybe half a day), it doesn't ring at the specified alarm time.
example 2. When I open de cover of the phone, thee screen does not turn on (it's a special Samsung cover, that turns on the screen when opened). Also when I press the power button, the 'small screen' belonging to the Samsung cover does not turn on; the whole screen turns on in stead.
example 3. In contacts, there is a function 'Business Cards', which can open the camera, take a picture of the card, and create automatically a contact from it. When I press the 'camera' button, the camera starts and closes immediately, as if something is detecting it as not-the-foreground app.
How can I solve this?
I have already tried to search on this and other fora, but because the term 'Battery Callibration' is so common, I find only how-to guides! Trying to solve this I was already wondering these questions:
Question 1: what does Battery Callibration actually do when do the 'long' calibration? It goes through all the apps. What setting does it change?
Question 2: how can I reverse whatever Battery Callibration did?
Question 3: would factory-resetting acutally help, since it required root, it might have changed settings in the system partition?
Question 4: are there other people with similar problems? I couldn't find any, but some experts here have more experience or more luck finding info.
Device: Samsung Galaxy Note3 (model N9002) with Android v4.4.2
XDA Developers is a busy forum and I am new here; I was wondering if I had posted this in the wrong section, since I didn't get any response so far.
Thanks for your kind help.
I'm close to having the phone perfect but these two still persist. There is a myriad of old options for Xposed and I was wondering if anyone has had success with any of them? I use the phone for a GPS unit on a cycle with a dynamo hub, so the waking up is annoying.
I've sorted the sound already, so there are two wake up conditions:-
1. power is enabled
2. battery reaches 100%.
Cheers, Andrew
snoopy20 said:
I use the phone for a GPS unit on a cycle with a dynamo hub, so the waking up is annoying.
Click to expand...
Click to collapse
Hi Andrew,
I can't help with Xposed, but I have a suggestion and a side question.
My suggestion : try IpBike (with IpBikeKey to unlock it).
The author of IpBike reads and answers e-mails. He is opened to new features if the idea is good.
If IpBike can't force the screen off (I never tested, as I don't charge my device as I cycle !), he may add the feature.
My question : is the PVG100 ANT+ capable ?
I use a Sony-Ericsson Xperia Active as a cycle computer (powered by IpBike), with ANT+ Speed, Cadence and Heart-rate sensors.
I would like to replace it with a PVG100E/EU, but the ANT directory does not list any Palm device.
Have a nice day !
Cobus.
Probably not, ANT is an extra cost for a manufacturer.
I found an open-source app which works. It's a bit old but still it does the job.
Basically it registers itself as an admin app so it can control the screen, then when a wakeup comes in it turns the screen back off. It's quick enough that the screen doesn't get a chance to come on. No root required.
snoopy20 said:
I'm close to having the phone perfect but these two still persist. There is a myriad of old options for Xposed and I was wondering if anyone has had success with any of them? I use the phone for a GPS unit on a cycle with a dynamo hub, so the waking up is annoying.
I've sorted the sound already, so there are two wake up conditions:-
1. power is enabled
2. battery reaches 100%.
Cheers, Andrew
Click to expand...
Click to collapse
Have you tried enabling "zen mode?" Zen mode keeps everything on the phone from waking I believe. I have tried it, but got annoyed when the wifi would cut out once I turned my screen off, because it would stop what I was listening to. Not sure exactly what you're looking for, but zen mode might be something to play around with.
To activate zen mode, the easiest way is probably through the app "setedit." Under "system" options, scroll to the bottom and change zen mode from 0 to 1.