Related
I swear the black plastic on the bottom back of the phone is engineered to get "scuffed" the first time you set it down . Other than that I have some lint in the little gap between the screen and the metal rim around the front.
I'm not going to use cases or screen protectors so all of this can be expected, just wondering how everyone else's is holding up? Any drops yet?
sportedwood said:
I swear the black plastic on the bottom back of the phone is engineered to get "scuffed" the first time you set it down
Click to expand...
Click to collapse
Definately falls in to the "what the hell were they thinking" category.
I'm not going to use cases or screen protectors
Click to expand...
Click to collapse
Wow, then I'm guessing we should all come back to this post in a month because you're proably our best durablity test example.
I HIGHLY recoomend a silicon case; protects the phone greatly, and makes it more sturdy to hold!
I got a complete package when I bought my GS2 for 5 euro.. A white and black silicon case, car charger and screen protector. Even though it isnt beautiful, I always keep my GS2 protected by a case
holding out for invisible shield now...
Absolutely fine for me, no marks whatsoever, no slow down of the software.
Have got a little dust around the edges between the edge and the screen.
i never use cases or screen protectors wether in mint or sh*t condition after 1 year who cares its time to upgrade.
sold my SGS after one year for AUD$350 and i never used a case or anything. (hopping to do the same next year with my SGS ii
Don't have any scratches or scuffs on it yet, but that's pure luck...I've managed to drop it twice and both times it landed on something soft. I love the phone but holding it can be a little awkward at times, it's angular shape and width does mean that I often have to shift my hands to accommodate it.
For that reason, I've put on a screen protector and I'm now waiting for an SGP Ultra Capsule Case to arrive. I'm hoping that will make it a bit more 'grippy' and less likely to slip out of my hands. My biggest concern is the camera lens, it seems terribly exposed there on the back of the device and it feels like I could damage it just by putting it down a bit too strongly.
Dropped mine 12 days ago. A juggle managed to launch it to a height of 5ft and then it landed totally flat screen down onto concrete with small stones on it. Shattered glass and non-working LCD.
Still waiting for Samsung to supply a replacement.
pmt32577 said:
Dropped mine 12 days ago. A juggle managed to launch it to a height of 5ft and then it landed totally flat screen down onto concrete with small stones on it. Shattered glass and non-working LCD.
Still waiting for Samsung to supply a replacement.
Click to expand...
Click to collapse
.... .. my condolences. Something like that is the only reason I sometimes fantasize about getting a case.
The dust between the screen, how do we get it out? wet qtip?
I got 1 tiny scratch on the bezel around the headphone jack. It happen the second day I had the phone. I've lost hope in the couple screen protectors I've ordered. I just ordered a zagg full body protector. I've got an a official samsung case coming now.
But I have never heavily damaged a phone besides my hd2. I'm like 48 out of 50 in keeping phones in great condition while not using a consistent case.
I truly hate the silver cheap bezel on all phones. Usually the only thing I tend to scratch.
Sent from my GT-I9100 using XDA App
Mine has a slightly weird hardware quirk since I first got it - the chrome border around the glass is slightly raised above the glass on right, but slightly below the glass on the left. It's like the glass is a bit angled / tilted up on the left.
Anyone else have this?
Nope mine is fine.
No scratches, have been using it for a month. I always put it on a cloth on my desk when I'm at home.
The dust between the glass and the plastic border annoys the **** out of me. I try to scrape it out with a needle, but they're too thick.
Sent from my Samsung Galaxy SII with XDA Premium
prodygee said:
Nope mine is fine.
No scratches, have been using it for a month. I always put it on a cloth on my desk when I'm at home.
The dust between the glass and the plastic border annoys the **** out of me. I try to scrape it out with a needle, but they're too thick.
Sent from my Samsung Galaxy SII with XDA Premium
Click to expand...
Click to collapse
no scratches at all for me...but the dust could be removed with patience and soft brush mate.. i use one that came with my philips shave - just a tip
prodygee said:
Nope mine is fine.
No scratches, have been using it for a month. I always put it on a cloth on my desk when I'm at home.
The dust between the glass and the plastic border annoys the **** out of me. I try to scrape it out with a needle, but they're too thick.
Sent from my Samsung Galaxy SII with XDA Premium
Click to expand...
Click to collapse
To remove the dust between the screen and the border all you need is compressed air. I was trying to get it out tonight by using my fingernail through a microfiber cloth to no effect. I pulled out my compressed air and that got it all out instantly.
On another note, I'm using the official Galaxy S II case until my Invisible Shield arrives in the next couple of days, hoping to convert totally to that and not have to use a case.
Can't you remove the dust in there with a can of compressed air and one of those straw attachments? Actually I might go out and buy one.
I definitely agree with the raised bottom on the back of the phone; mine's scuffed quite heavily although the front of the phone is fine, and IMO that's all that matters. A phone's meant to be used and it'll get scratches and whatnot over time.
I've got a feeling i'll be replacing this further down the track anyway since most of my phones don't look too healthy after the 18 month mark. Also have full insurance/warranty cover...if I happen to lose it they'll issue me a new one. Gotta love Korean telcos.
AXIS of Reality said:
Mine has a slightly weird hardware quirk since I first got it - the chrome border around the glass is slightly raised above the glass on right, but slightly below the glass on the left. It's like the glass is a bit angled / tilted up on the left.
Anyone else have this?
Click to expand...
Click to collapse
Mine is the EXACT same way, I was wondering if it was just mine. Good to know its just a quirk of the phone.
Eattheirdead said:
To remove the dust between the screen and the border all you need is compressed air. I was trying to get it out tonight by using my fingernail through a microfiber cloth to no effect. I pulled out my compressed air and that got it all out instantly.
On another note, I'm using the official Galaxy S II case until my Invisible Shield arrives in the next couple of days, hoping to convert totally to that and not have to use a case.
Click to expand...
Click to collapse
The dust can be removed with a piece of paper too.
Sent from my GT-I9100 using XDA Premium App
AXIS of Reality said:
Mine has a slightly weird hardware quirk since I first got it - the chrome border around the glass is slightly raised above the glass on right, but slightly below the glass on the left. It's like the glass is a bit angled / tilted up on the left.
Anyone else have this?
Click to expand...
Click to collapse
So your border is crome? I ask as mine as a black border
Sent from my GT-I9100 using XDA Premium App
tiny scratch at the back, at the plastic bump, fine elsewhere
Is there some local place that I can buy the 3M adhesive to do a screen replacement? Or does anyone know if there is a suitable replacement for it? I know tons of places to get it online, but I already have the phone apart and can't really wait for snail mail. Thanks guys!
When you glue it back make sure you do a good job at it other wise the glass will creak and be raised up in spots.
I would recommend purchasing a full front assembly. (Housing, LCD, and digitizer) you can get it for around $100.00 on eBay.
It's definitely more expensive than just a digitizer but it's super easy to install. You don't wanna mess up your LCD, and it will leave you with a demo front assembly to try to replace just the digitizer on in case you need it in the future.
Sent from my HTC EVO 3D using XDA App
I had the same question. What did you end up using? I was looking at some 3M sticky tape that I found at the local auto parts store.
Sent from my PG41200 using Tapatalk
Just curious as to how many people use a screen protector on their TF. If you don't, how's your screen holding up?
I've had my transformer since black Friday and the screen has not one scratch and I take it to class everyday. I have a case on it too.
Sent from my Transformer TF101 using xda premium
I have dogs that like to jump on beds, so I use one just in case. Also I use one so I don't fret about my glass being dirty or when a girl with rings on is playing with it, I will always know I have a perfect glass behind the screen protector. Sadly my screen underneath has funky **** going on like light bleed and a discolored spot
Sent from my Transformer TF101 using Tapatalk
I don't have a screen protector, but I am looking into getting one.
I have a very tiny dot on the border of the glass which I don't like much, just in case.
But the problem is how to apply a screen protector!! on my HD2 with its 4.3" display I had too much difficulty to put a screen protector without leaving dust underneath it, on a 10" display it is impossible....
I don't use a screen protector and my screen is perfect.
Tough i always keep it docked, so i guess it helps a lot
mcbyte_it said:
I don't have a screen protector, but I am looking into getting one.
I have a very tiny dot on the border of the glass which I don't like much, just in case.
But the problem is how to apply a screen protector!! on my HD2 with its 4.3" display I had too much difficulty to put a screen protector without leaving dust underneath it, on a 10" display it is impossible....
Click to expand...
Click to collapse
Biggest tip I can give is to apply the screen protector in the bathroom after running a hot shower to get the steam in the room to make the dust die down. Also, the bit of added moisture in the air helps to let you slide the screen protector around a bit before letting it become settled.
lightninjay said:
Biggest tip I can give is to apply the screen protector in the bathroom after running a hot shower to get the steam in the room to make the dust die down. Also, the bit of added moisture in the air helps to let you slide the screen protector around a bit before letting it become settled.
Click to expand...
Click to collapse
I use clear tape to get dirt out from underneath. But yes bathroom helps although I don't make it steamy. The biggest problem I ran into was aligning the whole thing. One corner would always be off just a tad. I ended up trimming it a bit and I can't even tell.
Sent from my Transformer TF101 using Tapatalk
checking for videos on how to apply a screen protector, I found this video:
where can I find this Dust Isolation sheet ?!? it seems GREAT
I use a screen protector on my TF101 mainly because it reduces glare and the fingerprints come off easier and it feels smoother that the regular gorilla glass
My tf101 was a best buy display model. It didn't have a screen protector then and it doesn't have one now. I sell saltwater livestock for a living and I'm a mechanic on the side, so it frequently comes in contact with dirt, grease, and saltwater. Not a scratch on the screen. I use a targus case to protect the screen when its not in use.
Regarding putting a screen protector on. Its just like window tint fellas. Clean screen as best you can. Mix some hand soap and tap water in a spray bottle. Spray screen protector and device and apply screen protector. Now spray front side of screen protector. Use a credit card or rubber squeegee to squeegee the water out from under the protector. As the water comes out it will drag the dust with it. Keep a towel on hand to dry the device as the water runs out. You might see a little water left under the protector after squeegeeing but it will dry completely over the next few days so don't worry about it.
TF101 EOS JB v63 Guevor 700 @ 1.5
Steinheil ultra crystal on mine. Best on the market bar none, and dry install. Nice and easy with no liquid.
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
Steinheil ultra crystal on mine. Best on the market bar none, and dry install. Nice and easy with no liquid.
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
its just too bad that SGP has no longevity... and by that I mean I can still get a martian fields and skinomi products for my old Touch Pro 2 but cant get a screen protector for either OR my TF101 through SGP/Steinheil...
When it comes to screen protectors for me its SGP/Steinheil then Martian Fields (then pretty much anyone else), but like I said, 8-12 Months later they drop it completely... so unless you stock up on them, be prepared to be screwed to find a different brand if you have an issue (I had my nephew destroy one of mine... I couldnt get my finger under the side but 2min with him and me not looking and it was off and bent in half )
My .02 anyway..
Hammerfest said:
its just too bad that SGP has no longevity... and by that I mean I can still get a martian fields and skinomi products for my old Touch Pro 2 but cant get a screen protector for either OR my TF101 through SGP/Steinheil...
When it comes to screen protectors for me its SGP/Steinheil then Martian Fields (then pretty much anyone else), but like I said, 8-12 Months later they drop it completely... so unless you stock up on them, be prepared to be screwed to find a different brand if you have an issue (I had my nephew destroy one of mine... I couldnt get my finger under the side but 2min with him and me not looking and it was off and bent in half )
My .02 anyway..
Click to expand...
Click to collapse
I upgrade every year, so that doesn't concern me too much, but that's a good point. I also usually do buy an extra pack
Sent from my EVO using Tapatalk 2
unnecessary i'd say.
http://www.youtube.com/watch?v=EUcJnwyCtes
projeto56 said:
unnecessary i'd say.
http://www.youtube.com/watch?v=EUcJnwyCtes
Click to expand...
Click to collapse
And...you'd be wrong. All those things he did most likely wouldn't scratch regular glass. For the most part keys and coins aren't hard enough. What will scratch glass, gorilla or not, is sand. Sand and grit is everythere. If your hands are dirty its there. It there's lint in your pockets its there. That's the enemy of screens.
Sent from my EVO using Tapatalk 2
crzycrkr said:
And...you'd be wrong. All those things he did most likely wouldn't scratch regular glass. For the most part keys and coins aren't hard enough. What will scratch glass, gorilla or not, is sand. Sand and grit is everythere. If your hands are dirty its there. It there's lint in your pockets its there. That's the enemy of screens.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I still had some fun when he sliced an Apple on it
Anyway, mine lives with the dock, so my screen isn't in contact with random dirty stuff.
Sent from my GT-N7000 using XDA Premium HD app
Had the transformer since it was first released. After a few months of ownership i tried the SGP ultra fine matte protector as the insane glare was starting to bother me. Had that on for a few months during which the screen nor the protector took any damage as i keep it docked when its not in use. Took it off 3 months ago and since then i've gotten one hairline scratch thats about a cm long, not noticeable unless you knew where it was.
I would say if you keep the thing docked and take care when cleaning the screen its not necessary to have a screen protector. However if you don't use a dock and the tablet is constantly exposed to any number of things that can scratch it, or you're not in the habit of taking good care of your gadgets then a screen protector might not be a bad idea.
Every time i see one of those glass scratch demos i facepalm as i've had quite a few devices that were supposed to be "scratch proof" get scratched by the most mundane things. Its all about angle, material, and force. I can slice a screen and not get a scratch but angle it a bit and give it more pressure and I bet i can get these screens to scratch pretty easily.
Scratch resistance is awesome in the lab, but in the real world there are just too many variables to be absolutely sure.
lacrossev said:
Scratch resistance is awesome in the lab, but in the real world there are just too many variables to be absolutely sure.
Click to expand...
Click to collapse
Says my Galaxy note.
Got some ugly scratches when I decided to use the flip cover case. Some sand or dirt got in between the glass and the leather cover. My heart is still broken because of it.
Sent from my GT-N7000 using XDA Premium HD app
So how do we feel about ZAGG screen protectors? I'm looking to put one on my Slider. In the past, I have been pleased with Caseen and their glareshatter screen protectors. Just wondering if there's any really recommended brands?
Solar.Plexus said:
So how do we feel about ZAGG screen protectors? I'm looking to put one on my Slider. In the past, I have been pleased with Caseen and their glareshatter screen protectors. Just wondering if there's any really recommended brands?
Click to expand...
Click to collapse
I've used ZAGG a few times, once on my zune, once on my evo and again on my evo LTE. The original ZAGG product is one of those soft wet apply films that are a bit grippy compared to a hard plastic film protector. I hated it for my zune and i hated it for my evo because of the grippiness as well as the slight orange peel effect. Over time the zune's wore down enough so that it was smooth and had no orange peel, but that took about a year and only in the spots you swipe around to change tracks and volume. Same thing happened with my evo.
On the Evo LTE I was tempted to try zagg HD, which actually was much better than the original film in that it was a lot more clear and had less grip, but alas it was still a soft wet apply film and i just couldn't get used to it.
If you like the grippy texture then the zagg and similiar soft films last longer than the hard plastics. It seems like a love it or hate it situation for a lot of people, myself included.
I will always go with the hard plastic dry install as those are in my opinion easier to apply because you can hover over the screen and slowly lower it as opposed to sliding it around on liquid and then have to squeegee it all out later. Even if i have to replace it once every few months as opposed to once a year for the zagg, i will still stick with the hard plastics.
Hey all,
I recently got an annoying scratch on the screen and was wondering if there was any good product for buffing it out. It might be a little too deep since I can feel it with my fingernail, but I would like to avoid replacing the digitizer touch screen. I saw some posts about various products, but for other phones.
Thanks
I would just be careful of messing up the digitizer. Buffing it might ruin its sensitivity.
Some people say that a good quality screen protector can help hide small scratches.I think one that gets mentioned a lot is called real look.
Sent from my rooted slightly modified Rezound using XDA
Realook is one of the best, but can only be used on perfect screens. Otherwise it will bubble really badly. For a screen that's already scratched, you need to go with a wet apply cover like zagg, or a cheaper knock off of zagg.
Sent from my ADR6425LVW using Tapatalk 2
Aeroman787 said:
Hey all,
I recently got an annoying scratch on the screen and was wondering if there was any good product for buffing it out. It might be a little too deep since I can feel it with my fingernail, but I would like to avoid replacing the digitizer touch screen. I saw some posts about various products, but for other phones.
Thanks
Click to expand...
Click to collapse
I wrote a writeup a few months back about buffing out scratches on the Rezound because I scratched my first one. link. I was able to successfully buff the scratches out with a product called "3M Trizact Perfect-It III Machine Glaze" (or just 3M P/N 06070).
While it does work well to remove the scratches, its expensive, and also I just don't recommend it for an important reason: The Rezound's glass has a texture to it. You don't notice it when looking straight at it, but if you let the light reflect off it you'll see that the surface of the glass is very slightly bumpy. If you attempt to buff out a scratch, you'll be left with a noticeable flat area on the screen where you polished the scratch out.
Also, the polishing compound I used costs $60 for a quart size bottle, and you only need like less than a cap-full to do the job. An alternative option is to buy a brand new glass and digitizer for less than $50...
Replacement glass/digitizer
I find sandpaper to buff out my scratches very nicely. Phone becomes smooth as a baby's bottom.
Howdy,
I dropped my Note a couple times and it survived, but the small lip around the screen is no longer smooth. I think this is referred to as the bezel. My question is, is the plastic piece replaceable, or is it a screen part that is either fused or glued to the screen, making it not worth the effort to replace it? I checked a few sources and am still not sure. I may be selling the Note, and would probably fetch a better price if this piece is in better shape.
lindenhurst said:
Howdy,
I dropped my Note a couple times and it survived, but the small lip around the screen is no longer smooth. I think this is referred to as the bezel. My question is, is the plastic piece replaceable, or is it a screen part that is either fused or glued to the screen, making it not worth the effort to replace it? I checked a few sources and am still not sure. I may be selling the Note, and would probably fetch a better price if this piece is in better shape.
Click to expand...
Click to collapse
Let me preface by saying that I personally do not know the answer. With that said I have seen several mentions on here about the glass and bezel being one piece together. Ergo both have to be replaced at the same time.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I'm going with the one piece answer also.
I believe the glass and edging is one part....g
Is it this part called a face plate? Hard to tell from the pics. I'm assuming you mean the thin plastic slightly raised around the edge of the glass.
Sorry, it's for international...but maybe they have i717 parts.
http://www.parts4repair.com/samsung-galaxy-note-face-plate-white/
This might be the one... http://www.parts4repair.com/samsung-galaxy-note-i717-at-t-middle-cover-with-plate/
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2