Hi everybody, I'm Luis and this is my first post
I have a problem with my phone:
few days ago I installed this rom on my Xperia Mini Pro:
http://forum.xda-developers.com/showthread.php?t=2002376
After install the rom, the touch screen is not working anymore :crying:
I did some things to solve my problem but the touch screen doesn't work:
factory reset
restore with cwm
flash my XMP with flashtool using GB and ICS roms
reinstall the firmware with SEUS
but the touch screen is dead, the home and power buttons are working, the back and menu buttons are dead too.
my phone has a locked bootloader
Can somebody help me please?
PD: Sorry for my bad english :silly:
i have the same problem too man...
i'm still waiting any man can help us...
echo juned said:
i have the same problem too man...
i'm still waiting any man can help us...
Click to expand...
Click to collapse
Yes I know bro, there are more with the same problem for this FK rom
if u guys had made a backup in recovery before flashing u cud have restored it.
i assume u havent done so . therefore use flashtool to flash new firmware or simply try installing a new ROM and see if TS is working !
MoonBlade said:
if u guys had made a backup in recovery before flashing u cud have restored it.
i assume u havent done so . therefore use flashtool to flash new firmware or simply try installing a new ROM and see if TS is working !
Click to expand...
Click to collapse
I did, but the touch screen doesn't work. Another idea?
i dunno if this will help but see solutions in this thread...
http://forum.xda-developers.com/showthread.php?t=1721331
Related
Hello everyone , today i re rooted my sk17i , installed cwm recovery and everything was going fine.I downloaded this rom called hybrom v15, i wiped the phone ,and insalled the rom. When i turn on the phone , it just stays on the Sony Ericsson Logo D: , i need help please! this thing has been like this for hours! how can i fix it ? I hope for a reply soon!
Thank you
xZeruda said:
Hello everyone , today i re rooted my sk17i , installed cwm recovery and everything was going fine.I downloaded this rom called hybrom v15, i wiped the phone ,and insalled the rom. When i turn on the phone , it just stays on the Sony Ericsson Logo D: , i need help please! this thing has been like this for hours! how can i fix it ? I hope for a reply soon!
Thank you
Click to expand...
Click to collapse
Hello.
Is your bootloader unlocked? Or you installed CWM using nAa's installer?
Thanks,
Rick
Sent from my SK17i using XDA
I don't know D:
I was such in a hurry i didn't check , i assume this it wasn't , maybe thats the cause of the freeze , is there anyway to fix it :'(
xZeruda said:
I was such in a hurry i didn't check , i assume this it wasn't , maybe thats the cause of the freeze , is there anyway to fix it :'(
Click to expand...
Click to collapse
Do not worry.
Check the Downgrade to GB section here:
http://talk.sonymobile.com/thread/35239?tstart=0
Steps are easy to follow and hopefully will solve your issue. And for ftf files for firmwares other than those listed there, search here on XDA.
And for your information, never try to flash a ROM using CWM by nAa's method. That CWM recovery is at /system. And most Roms replace the/system, and thus messes with the CWM on way. So, if you want to flash custom Roms, unlock the bootloader.
Thanks,
Rick
Hit Thanks if I helped in anyway
Sent from my SK17i using XDA
xZeruda said:
Hello everyone , today i re rooted my sk17i , installed cwm recovery and everything was going fine.I downloaded this rom called hybrom v15, i wiped the phone ,and insalled the rom. When i turn on the phone , it just stays on the Sony Ericsson Logo D: , i need help please! this thing has been like this for hours! how can i fix it ? I hope for a reply soon!
Thank you
Click to expand...
Click to collapse
Sorry friend you do not have the full backup of your original ROM. Had it was easy.
I'll try to help you with a hint can not say that it will work. For I have not tried this.
Go here to download the ZIP file http://forum.xda-developers.com/showthread.php?t=1568792refente the ROM of your device. Then please make sure that you load on | You will need to charge your battery in another material. After that try to install the ROM ZIP with CWM. I believe this will work. : Cool:After I installed a wrong kernel LWW my phone stopped starting. I could not even outrar Kernel flasher so it was thanks to CWM that saved the life of my phone with Full Backup Original ROM that always has to be done before anything else.
First i read the little tutorial with st17 dont think it work to sk17i , i try to flash stock .58 with flash tool many times , and with seus Repair for many times , all kernels , roms etc.
downloaded work boot (for active) and instaled the good rom for sk17i only the boot i think it was wrong , it was with red ...i think it was for active , i was in hurry (@work) :crying::crying:
so anyone know about this problem ?
my phone last Waranty day 19.06
So... err.. you flashed an ST17 ROM on your SK17i?
...and now the touch is dead?
Well, have a look see on the thread below. We have a long standing discussion on the matter and some probable fixes you can try.. Good luck mate~
http://forum.xda-developers.com/showthread.php?t=1713449
I have the same problem. I never installed ROMs on my sk17i and the touchscreen just stoped working.
I already tried to restore by PCC or flashtool, but nope.
I've read that thread, but aren't the solutions for ST15i? And don't i need to have root to try those solutions?
yes it is for st15 / walkman , and root u can get if u install costum kernel but the problem it is not this , it is we can to make the touch to work or we trow the phone ...
i try last night : install x kernel + rom for active the touch worked 40% , then install via flashtool the stock for active the same , then when i go back to my stock for sk17i the touch is dead...
nobody here have a solution ?
update
seems i was flashing first with rage kernel for xperia arc dont now from where the hell i get the kernel , and the all roms it is for mini pro it is ok only the kernel was wrong
Gordalhao said:
I have the same problem. I never installed ROMs on my sk17i and the touchscreen just stoped working.
I already tried to restore by PCC or flashtool, but nope.
I've read that thread, but aren't the solutions for ST15i? And don't i need to have root to try those solutions?
Click to expand...
Click to collapse
If you never flashed any rom, then it's most likely hardware mate. Sending for repairs is your only fix.
Sent from my WT19i using XDA Premium App
If I may not be too late, I also got this problem (flashed lww kernel and ROM on xmp).
Touchscreen and home buttons stopped working, even in recovery.
I flashed paranoid android kernel (the ROM I used before this happened),
Factory reset, format system and dalvik cache in recovery.
Let the phone boot with no system.
Wait....nothing will happen. Then take off the battery and insert again.
The phone is back to normal.
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
Did you unlock bootloader on official way or via testpoint?
Flash the stockrom and see what happens...
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
bekris56 said:
I think that was via testpoint..i dont know for sure because one of my friends did it...i searched all similar posts but i cant use flashtool!it stuck on screen that says to plug in my phone!
Click to expand...
Click to collapse
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
bekris56 said:
Hello everyone,
i have wt19i with JellySandwich 6.2.1 and rage kernel v3.2!i flashed earlier FOX XMP ICS rom and after that my touchscreen was not responding...in the screen where it says to write down the pin,i could only press the zero button and all the hardware keys work fine...!If anyone knows how to fix it please help.....
Click to expand...
Click to collapse
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
mihahn said:
So you install the latest flashtool version. Afterwards you download the gingerbread (or ics) ftf for your device. You install all drivers from flashtool installation folder> drivers. Now you launch flashtool, click on the flash, select flashmode and choose the ftf. Now turn phone off, hold volume up and while holding plug in pc. Don't turn phone on, just connect while holding volume down. Flashtool will automaticly flash the ftf.
Just restart and see what happens
Click to expand...
Click to collapse
I did it....still the same problem...!
bekris56 said:
I did it....still the same problem...!
Click to expand...
Click to collapse
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
mihahn said:
So you stuck there, on the latest flashtool build. Reinstall it and try again, it must work!
Click to expand...
Click to collapse
You mean to flash 2 times the same ftf?
Oh so you mean you have installed stock firmware and touch isn't working anyway? There are some threads about how to fix touchscreen with hybrom (like sandy7 said)
Sent from my SK17i running Jelly Bean via CM10
sandy7 said:
flashing another device rom to ur made this problem..bcz when u do it the the touch drivers are replaced screwing ur touch screen digitizer...
try flashing hybrom v16 GB of sk17i and flash to stock lww rom after that....
is it still dont work u have to replace ur touchscreen digitizer.
Click to expand...
Click to collapse
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
LLoSER said:
Hello, I have done the same with these two roms and I have the same problem. I can not operate the touchscreen phone. Please cant you help me?
Sorry for my english. I am Spanish.
Click to expand...
Click to collapse
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
gouthamthemostwanted said:
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
hit thanks if I've helped!
sent from my smultron
Click to expand...
Click to collapse
Hi, first thanks for your help.
But I've done what I mentioned twice and the touch screen is still not working. Can you think of any other solution?. thanks
bekris56 said:
if you have a link for hybrom v16 i would be thankfull to you!!and one more question,i must flash hybrom and let the phone boot?or no?
Click to expand...
Click to collapse
search xda for the tut how to solve ur problem....
and hybrom link u can find it here http://forum.xda-developers.com/showthread.php?t=1879666
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
Hello, I have the same problem as you with the mini st15i. Could you tell me all the steps to make it work?
Thanks in advance.
need help with my wt19i
i have the same problem too :crying: last night i've flashed wrong cusrom (should have known it for mini pro) but mine is wt19i and the touchscreen was never responding ever since. I've tried so many ways in i.e :
http://forum.xda-developers.com/showthread.php?t=1856334
http://forum.xda-developers.com/showthread.php?t=1927058
http://forum.xda-developers.com/showthread.php?t=1779023
http://forum.xda-developers.com/showthread.php?t=1721331
none worked for me. Not even partially . Been tried using rage kernel 2.6, 2.7, X-kernel, KrSH kernel. Hybrom v10, v12 minipro, v12 lww. but it just can't boot seems like i'm desperate right now. Do i have to keep flashing again and again? bcause i see some comments about just tried to keep flashing to their devices and sometime it could magically turn the touchscreen to work
Hybrom v12
bekris56 said:
Thank you all for helping but i just fix it!!!!
I followed the steps from this post http://forum.xda-developers.com/showthread.php?t=1773114 but i used rage kernel 2.7 and hybrom v12!not v10!!
Click to expand...
Click to collapse
I searched for hybrom v12 mini pro for about half an hour, if you know the right method and link kindly reply me asap and with full instructions. I am also Lww user and facing same touch screen issue.
I will appreciate your concern.
Thanks.
Help me with this method
https://forum.xda-developers.com/xperia-mini/help/tp-firmware-config-file-to-fix-t3704805
I recently installed LWW rom on my mini by mistake, now its touchscreen is not responding. wat do?
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
If it didn't work the below thread might give you some idea
http://forum.xda-developers.com/showthread.php?t=1927058
hit thanks if I've helped!
sent from my smultron
you can do this to fix your touch....
flash an stock 2.3.4 firmware..
flash a "ported rom"on your device
flash stock firmware again
metalrawk said:
I recently installed LWW rom on my mini by mistake, now its touchscreen is not responding. wat do?
Click to expand...
Click to collapse
hey are that 'shapshifter' guy from se-nse right...
as i told follow that tut...
the same problem happened to my friend 'shprakash' he followed every thing in that tut..but it didnt work..
finally ended up replacing the digitizer ...which is around 2000INR
my phone was sk17i with ICS and locked boot loader.. i rooted my phone and installed custom ROM given here http://forum.xda-developers.com/showthread.php?t=1991371
but after installation it is showing a menu for selecting language..but am not able to select next option because my touch screen is not working.. i tried flashing with sk17i firm ware but showing same screen.. and i tried many times to enter into the cwm recovery mode .. but phone is getting started as usual without entering into recovery mode. I first entered into recovery mode with an option "automatically reboot and recovery" option in as software called x-part.. what should i do now.. please help me.. am in trouble..
Install cwm using this http://forum.xda-developers.com/showthread.php?t=1346190, then wipe everything (especially mounts/storage /system partition) and re-install. are you sure you made the correct choices in aroma installer? if touch is not working you probably installed the version for some other model or made wrong choice where it asks if bootloader is locked or unlocked.
Rudjgaard said:
Install cwm using this http://forum.xda-developers.com/showthread.php?t=1346190, then wipe everything (especially mounts/storage /system partition) and re-install. are you sure you made the correct choices in aroma installer? if touch is not working you probably installed the version for some other model or made wrong choice where it asks if bootloader is locked or unlocked.
Click to expand...
Click to collapse
i don't undrstnd wot actually problem is.. it is showing only a welcome screen now with language selection option.and when i connected it to my system it is showing "live with walkman connected" instead of sk17i.. and also i tried the above link and tired to install the software.. but after pressing install button .. nothing happens.. please help
In aroma installer there is a device selection as
Lww
Mini pro
Mini
Active.
U should choose ur respective device there..
According to ur statement I think u selected live with walkman in aroma...
Where the Rom got replaced with live with walkman touch drivers.
Thats y ur touch is not working
sent straight from hell
sandy7 said:
In aroma installer there is a device selection as
Lww
Mini pro
Mini
Active.
U should choose ur respective device there..
According to ur statement I think u selected live with walkman in aroma...
Where the Rom got replaced with live with walkman touch drivers.
Thats y ur touch is not working
sent straight from hell
Click to expand...
Click to collapse
yup ..bro.. i think wot u said is true.. i accidently selected selected LWW i think.. wot s the solution now..?? am not able to get into the recovery mode.. i tried many times.. even afta pressing volume down button at startup.. it is getting started as usual.. help me please..
Locked or unlocked bootloader.
sent straight from hell
sandy7 said:
Locked or unlocked bootloader.
sent straight from hell
Click to expand...
Click to collapse
LOCKED bootloader...please help.. how can i go back.. can't even enter into cwm
Reflash stock ftf firmware using flashtools, you will probably loose root after that and will have to repeat the rooting procedure. Then you can re-install the rom making the correct choices
Vivek ps said:
LOCKED bootloader...please help.. how can i go back.. can't even enter into cwm
Click to expand...
Click to collapse
First unlock ur bootloader n flash a custom kernel so u will get cwm thn enter in cwm n flash the rom for ur device
Nah, unlocking bootloader is needless. Just use Sony Update Service / Flashtool to reflash the firmware. Then root and reinstall the ROM again.
i again installed GB Rom and rooted again and then again installed the HD custom ROM(the one i mentioned in above link) and selected se mini pro in aroma installer and even after installation SE logo is showing and then screen is black.. why it is like that???
sandy7 said:
Locked or unlocked bootloader.
sent straight from hell
Click to expand...
Click to collapse
bro i again flashed back into GB rom and rooted my device again and then istalled HD custom rom again and selected my device in aroma installer.. and installations was success.. but after reeboting se logo is getting displayed .. but after that there is only a black screen
Did u select locked bootloader in aroma
sent straight from hell
sandy7 said:
Did u select locked bootloader in aroma
sent straight from hell
Click to expand...
Click to collapse
yes i selected locked bootloader.. what are the other options i need to be selected for it to be workin on sk17i..?? actually does it support sk17i??/
Vivek ps said:
yes i selected locked bootloader.. what are the other options i need to be selected for it to be workin on sk17i..?? actually does it support sk17i??/
Click to expand...
Click to collapse
What all did u format in cwm
sent straight from hell
Exact same issue on ST15 when installing this same ROM.
I have been trying to fix it all morning.
Installing .62, then Hybrom10, then again .62 DID fix my screen, although I don't get the logic:
http://forum.xda-developers.com/showthread.php?t=1713449
I just installed another ROM now and all is fine.
Cheers.
sandy7 said:
What all did u format in cwm
sent straight from hell
Click to expand...
Click to collapse
i don't know wot s the problm wid my phone.. i dropped plan of installing the HD Rom and startd installing the OPTIMax Rom provided by you. again the same problem is occuring.. installation and everything is completed successfully.. but after rebooting for the first time after installation, sony ericsn logo is coming and after that a screen with dim light is being displayed.i don't know wot to do.y can't i install any custom rom on my device..?? i think you can help me to sort out the problem
Vivek ps said:
i don't know wot s the problm wid my phone.. i dropped plan of installing the HD Rom and startd installing the OPTIMax Rom provided by you. again the same problem is occuring.. installation and everything is completed successfully.. but after rebooting for the first time after installation, sony ericsn logo is coming and after that a screen with dim light is being displayed.i don't know wot to do.y can't i install any custom rom on my device..?? i think you can help me to sort out the problem
Click to expand...
Click to collapse
i saw in some other forum someone talking about the same touch screen problem. he used a touchscreen.zip and fixed it somehow. but i guess it was for a different ROM..
Edit: This one
oops i guess the discussion isnt about this one.
---------- Post added at 05:31 PM ---------- Previous post was at 05:14 PM ----------
Vivek ps said:
bro i again flashed back into GB rom and rooted my device again and then istalled HD custom rom again and selected my device in aroma installer.. and installations was success.. but after reeboting se logo is getting displayed .. but after that there is only a black screen
Click to expand...
Click to collapse
i guess i figured out ur problem !!
since u flashed the GB firmware i think ur phone still has the kernel supporting GB.
u must upgrade to ICS firwares and then root and give it a try to install new ROMS
MoonBlade said:
i saw in some other forum someone talking about the same touch screen problem. he used a touchscreen.zip and fixed it somehow. but i guess it was for a different ROM..
Edit: This one
oops i guess the discussion isnt about this one.
---------- Post added at 05:31 PM ---------- Previous post was at 05:14 PM ----------
i guess i figured out ur problem !!
since u flashed the GB firmware i think ur phone still has the kernel supporting GB.
u must upgrade to ICS firwares and then root and give it a try to install new ROMS
Click to expand...
Click to collapse
yes..bro. .thankz a lot for everyone's help.. i installed my first custom rom.. and i want to ask u that is there any problem in repeatdly flashing the device many times. ??
Vivek ps said:
is there any problem in repeatdly flashing the device many times. ??
Click to expand...
Click to collapse
Not that we know of
.:goutham:.