Hello, i recently flashed 1.9.1 and at first it was running really smooth but now i been having massive amounts of lag. I'm runnin Lazy governor with 384min 1.24 max. Does anyone have any suggestions to speed it up? Or is anyone having similar problems?
Oh and I'm not sure if it's related to the rom but my WifiTether seems to cut off signal a few times. But didn't seem to happen on 1.8.
And can anyone please provide me with a link to version 1.8 with the md5 too please. Thank you.
Sent from my Rezound using Tapatalk 2
Try clearing caches. If that doesn't help try flashing the kernel. If that still doesn't help reflash the ROM. I'm guessing it started having trouble after you reloaded all of your data?
Sent from my ADR6425LVW using Tapatalk 2
Here is a link to my mirror of all the Rage releases since 1.6
http://db.tt/WLaAbqIe
Sorry don't have an md5, but I copied them straight from neo. I would also recommend clearing cache and dalvik cache. I also run the v6 supercharger script from xda every time I flash a rom. Makes your launcher have higher priority and frees up RAM for active apps.
Sent from my Rezound using Tapatalk 2
abby_nitewolf said:
Hello, i recently flashed 1.9.1 and at first it was running really smooth but now i been having massive amounts of lag. I'm runnin Lazy governor with 384min 1.24 max. Does anyone have any suggestions to speed it up? Or is anyone having similar problems?
Oh and I'm not sure if it's related to the rom but my WifiTether seems to cut off signal a few times. But didn't seem to happen on 1.8.
And can anyone please provide me with a link to version 1.8 with the md5 too please. Thank you.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
I dont know if it will help but in Developer options i turn off window animation and transition animation
abby_nitewolf said:
Hello, i recently flashed 1.9.1 and at first it was running really smooth but now i been having massive amounts of lag. I'm runnin Lazy governor with 384min 1.24 max. Does anyone have any suggestions to speed it up? Or is anyone having similar problems?
Oh and I'm not sure if it's related to the rom but my WifiTether seems to cut off signal a few times. But didn't seem to happen on 1.8.
And can anyone please provide me with a link to version 1.8 with the md5 too please. Thank you.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
Yes, use SetCPU and run two different profiles. It seems to work best if you use wheatly for screen off (because wheatley goes into deep sleep faster) and use intellidemand when screen on. I typically don't UC my profiles, but I am still pulling 2 days of use with about 1.5 hours of screen time (on OEM battery).
Edit: I'm sorry, I run system tuner, not SetCPU.
Related
My phone will randomly reboot or and my screen will freeze and the only way to fix it is to pull the battery. Is anyone else having this problems I'm running Nero v3 with the Voodoo lag fix and a custom theme I made on top of it.
Sent from my SGH-T959 using XDA App
This sums up my Nero V3 experience. 4.1 seems better, but I haven't ran it long enough to know if it is any better.
For what it's worth JL5 was laggy too, but no random reboots.
Eat at Joe's
Im rooted, stock rom,, and lately this same thing been happening to me. Random shut offs and i cant figure it out.
Sent from my SGH-T959 using XDA App
Ok thanks for letting me know I switched to Nero v4.1 so hopefully I'll stop having these problems but until then thanks.
Sent from my SGH-T959 using XDA App
I've tried about every rom that's been made for the Vibrant with no issues.
I'm willing to bet it's another issue.. A bad app or theme maybe?
There is an app, watchdog I believe is the name that shows cpu usage/hogs.
s15274n said:
I've tried about every rom that's been made for the Vibrant with no issues.
I'm willing to bet it's another issue.. A bad app or theme maybe?
There is an app, watchdog I believe is the name that shows cpu usage/hogs.
Click to expand...
Click to collapse
ok thanks ill check it out
i was think it was my cpu but wasn't too sure if that was it.
i dont think it my theme because im running it now on nero v4.1 (its been 2 days now) with no problem but who know?
I've been having this problem. I use my phone for an alarm clock, the past week I've woken up with the phone off, luckily haven't been late yet.
Only thing I've been doing different in that period is I've flashed Dragon kernel 3.2 and had the simple cyan theme. Also running Bionix V 1.2, but thats only since yesterday. Checked for runaway apps but couldn't find anything crazy.
Stock KB1 here and have been experiencing similar issues - severe instabililty. NEVER had this problem before flashing to this level.
Anyone else experiencing force closes the on the browser? I get it all day, so annoying I typically notice it after a rom that's usually broken in..fresh installation I don't get it...tried clearing out cache....can anyone help me? Thx
Rooted S-OFF
Radio-MR3 (802w)
Ging3R3DTh3oRY 6.2
V6 supercharge script
Extreme undervolted
O.C @ 1.4 ghz gov. Lag free
Ziggys infected kernel
Bolted to the max =)
You have flash player installed? I've heard not having that installed may cause browser issues.
Sent from my ADR6400L using XDA App
Hi all, I've some problems with my undervolted S3 (but same issues has my brother with his undervolted Note 2).
If I undervolt my phone (-25mV/-50mV/-75mV, ecc...all values are the same thing), lag problems appear with youtube app and also with other video, like flashplayer. Lag appears after about 10 minutes I'm watching some HD videos, and I must reboot S3 to solve the problem, infact change voltages to default values don't help.
I used apps like Voltage control or CPU tweaker, that allow to create different profiles whit different values, but when the lag appears, also if I select profile with default values the problem remains until i reboot...
How do you solve this problem? If you undervolted your phones, how you solve the lag problem? Thx for replies
There is an old saying back in my question.
Literally translation: if you want your horse to run, you have to feed it first.
Did you try other kernel?
Sent from my GT-I9300 using xda premium
Next time, post your problems in Q&A section for more help.
This time, try different kernel or don't use UV as is not much point anyway...
Sent from my GT-I9305 using xda app-developers app
R: (Q) Undervolt and lag, how to solve it?
qtwrk said:
There is an old saying back in my question.
Literally translation: if you want your horse to run, you have to feed it first.
Did you try other kernel?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Already tried
So, I think there's no solutions for lag when phone is undervolted, but is strange that lag persists when I come back at default profile.
djembey said:
Next time, post your problems in Q&A section for more help.
This time, try different kernel or don't use UV as is not much point anyway...
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Sorry for mistake
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Kikorin said:
Already tried
So, I think there's no solutions for lag when phone is undervolted, but is strange that lag persists when I come back at default profile.
Sorry for mistake
Click to expand...
Click to collapse
OK... as far as we know, every phone has its own tolerable voltage... You said even default voltage causes lag as well, may be you should overvoltage to see if you can get it stable?
Maybe it's related with ROM?
Sent from my GT-I9300 using xda premium
R: (Q) Undervolt and lag, how to solve it?
qtwrk said:
OK... as far as we know, every phone has its own tolerable voltage... You said even default voltage causes lag as well, may be you should overvoltage to see if you can get it stable?
Maybe it's related with ROM?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I haven't tried overvolt, but is possible that default values I see when open for the first time Stweaks or Set CPU aren't right for my phone?
My rom is Foxhound with siyah kernel.
Kikorin said:
I haven't tried overvolt, but is possible that default values I see when open for the first time Stweaks or Set CPU aren't right for my phone?
My rom is Foxhound with siyah kernel.
Click to expand...
Click to collapse
I would suggest you try stock ROM and stock kernel first, if it's all OK with stock, then first try other kernel, if using other kernel still OK, then perhaps it could ROM problem, anyway, you have to slowly determine where or what part went wrong and cause lag
Sent from my GT-I9300 using xda premium
I already posted this on the Rootbox rom thread, but I know not everyone reads the whole thread so it might save a bunch of people from asking the same question on different threads over and over again. I have tried out a few 4.2.2 roms and they would always reboot randomly, I used the 4Aces kernel and the Uber kernel and got the same results, constant random reboots. I fixed the problem by turning off CPU profiles. I use SETCPU to overclock, but I assume this is a kernel problem that would happen no matter which app you use to overclock. Hope this helps others!
Just to clarify, I'm still overclocking my device I've just turned off the CPU profiles.
Thanks a lot Porkenhimer, Will try this fix asap.
where is cpu profiles?
thanks, hope this somehow works
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Nice. Thanks
I went to check the profile but it was already disabled do I have to worry about it?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
cgibsong002 said:
where is cpu profiles?
thanks, hope this somehow works
Click to expand...
Click to collapse
Soo, yeah, OP, what exactly are "CPU Profiles". Is this some app? Or is it the setting like in SetCPU that lets you change profiles around in sleep, wake etc?
I don't see it on SetCPU.. Under the Profiles tab, the "Enable Profiles" is not checked. Never has been . I still get the occasional reboot but its somewhat rare at this point. Nothing to concern myself with
Sent from my SAMSUNG-SGH-I717 using xda premium
Many things happen that cause reboots... Set cpu profiles may be a problem with certain rom and kernel combos but is not a problem for others...specify which rom and kernel combos your using
shayneflashindaily said:
Many things happen that cause reboots... Set cpu profiles may be a problem with certain rom and kernel combos but is not a problem for others...specify which rom and kernel combos your using
Click to expand...
Click to collapse
Did an experiment yesterday and today, I ran 5 random 4.2.2 ROMs each for two hours, 1 hour with no CPU profiles setup and 1 hour with CPU profiles setup and enabled. I used the 4Aces kernel for each test. I also used a different profile setup for each ROM. I did a full wipe before installing each ROM. The ROMs I used were PAC-Man, Alliance, Rootbox, ReVolt & Jellybeer. I did not install any apps except for SETCPU. I had a total of one reboot with CPU profiles turned off, which was with the PAC-Man rom, and the least amount of reboot I had was with Rootbox, which was 3 reboots in one hour with CPU profiles enabled. Its pretty clear to me that enabling CPU profiles at least with the 4Aces kernel, will cause reboots. I had used both both the 4Aces and Uber kernals before doing this test and got reboots on every 4.2.2 rom I tried so I'm guessing if I did the same exact test with the Uber kernel I would get the same results. I'm not saying that other things are not also causing reboots, but its clear to me that something bad is happening when CPU profiles are enabled.
khaytsus said:
Soo, yeah, OP, what exactly are "CPU Profiles". Is this some app? Or is it the setting like in SetCPU that lets you change profiles around in sleep, wake etc?
Click to expand...
Click to collapse
Yes its the tab that says profiles in SETCPU.
Well you must have had a borinnnnng day haha. ... And your eyes must hurt for waiting on reboot.... I run 4/20 rootbox with profiles set for screen on 192/1242 WHEATLEY and screen off 192/972 powersave...4aces kernel. Only had one reboot and it was my daily driver for over a month. ...also the new base changes and merges may be messing with profiles set for set cpu in the newer 4.2.2 builds of roms and kernels. Cool to see someone giving that much time in a day to watch for reboots. Keep visine handy ...hope you figure out more
---------- Post added at 03:35 AM ---------- Previous post was at 03:33 AM ----------
And actually run a logcat of it re booting with profiles and we will have some answers to what is causing the issue
porkenhimer said:
Yes its the tab that says profiles in SETCPU.
Click to expand...
Click to collapse
This is the big miraculous fix?? Meh.
I fix all my Reboot issues by flashing a 4.1.2 aosp Rom with all of I717 JB source.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
I fix all my Reboot issues by flashing a 4.1.2 aosp Rom with all of I717 JB source.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Which Rom?
rogsoccerman said:
Which Rom?
Click to expand...
Click to collapse
Custom, made for me.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rogsoccerman said:
Which Rom?
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Well xda is the place of sharing.
Ltilt. Pm.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I've heard good things about stability with uber kernel + beanstalk rom
porkenhimer said:
I already posted this on the Rootbox rom thread, but I know not everyone reads the whole thread so it might save a bunch of people from asking the same question on different threads over and over again. I have tried out a few 4.2.2 roms and they would always reboot randomly, I used the 4Aces kernel and the Uber kernel and got the same results, constant random reboots. I fixed the problem by turning off CPU profiles. I use SETCPU to overclock, but I assume this is a kernel problem that would happen no matter which app you use to overclock. Hope this helps others!
Just to clarify, I'm still overclocking my device I've just turned off the CPU profiles.
Click to expand...
Click to collapse
Heres a fix...........dont flash 4.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Lol there won't be a fix ... some 4.2.2 its pretty stable though imo
••••changes with every flash••••
I'm on Infection 2.9.1 and I also flashed the latest Hiro kernel. I downloaded Trickster MOD to change settings. I'm getting a lot of reboots but I'm also trying to save as much battery as possible. I have no idea what settings to mess with and what to change them too. My phone settings had a Performance settings where you can change CPU settings and I also have Trickster like I said, just don't know which to use. I think both are on which might be causing problems? I posted some screenshots, could some please help me get something going? - Thanks guys!
http://img.tapatalk.com/d/13/07/24/u2a2a9u5.jpg
http://img.tapatalk.com/d/13/07/24/puzenesu.jpg
http://img.tapatalk.com/d/13/07/24/yhehynug.jpg
Oh, and "set on boot" means its turned on, correct?
If your using a kernel app like trickster mod than make sure everything that says set on boot under system\performance is unchecked
Sent from my ADR6425LVW using xda app-developers app
bunchies said:
If your using a kernel app like trickster mod than make sure everything that says set on boot under system\performance is unchecked
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
OK I got that part but what settings should I use? I'm not good with kernels and these apps, changing voltages, etc. My phone has been overheating and boot looping a lot. I also want to get best battery life possible. I just don't know what settings to use. Also if I'm using trickster to tweak my CPU shouldn't the performance in my phone settings be shut off? I'm open to using another tuner app.
Sent from my Infected Rezound using Tapatalk 2
Make the sleep frequency be 384 (whatever the 300 MHz is) been running that way since launch of 2.9.1, no issues, besides the native tether (only buggy issue I use) and whatever else others reported, I assume. Never used the features that this report so I don't know.
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
Make the sleep frequency be 384 (whatever the 300 MHz is) been running that way since launch of 2.9.1, no issues, besides the native tether (only buggy issue I use) and whatever else others reported, I assume. Never used the features that this report so I don't know.
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
I don't see a sleep setting? Here is what I see.
Sent from my Infected Rezound using Tapatalk 2
There is an option in kernel tuner for it. Some kernels do not support changing that setting though.
Now that he released it, this is what I used on infection the past week when 2.9.1 came out. It works amazingly. On install it gives you options for sleep 2 wake and screen off frequency (I set mine to on and 384 with no adverse issues)
http://forum.xda-developers.com/showthread.php?p=43942950
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
There is an option in kernel tuner for it. Some kernels do not support changing that setting though.
Now that he released it, this is what I used on infection the past week when 2.9.1 came out. It works amazingly. On install it gives you options for sleep 2 wake and screen off frequency (I set mine to on and 384 with no adverse issues)
http://forum.xda-developers.com/showthread.php?p=43942950
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
No clue what your talking about? What does that jb port do? Also are you saying I need to get rid of trickster mod and DL kernel tuner?
Edit: I downloaded kernel tuner app just even more confusing now. It has cpu0 and cpu1 and about 100 other options.
Sent from my Infected Rezound using Tapatalk 2
xXezmacXx said:
No clue what your talking about? What does that jb port do? Also are you saying I need to get rid of trickster mod and DL kernel tuner?
Sent from my Infected Rezound using Tapatalk 2
Click to expand...
Click to collapse
That kernel has special options in recovery when you flash it
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
That kernel has special options in recovery when you flash it
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
So this kernel will replace Hiro which I'm using now?
And you keep saying to change sleep freq to 384? I'm guessing that will fix my wake issues. What about fixing my battery life and boot loops?
Sent from my Infected Rezound using Tapatalk 2
Can anyone else chime in? This is what I'm trying to accomplish.
1. Fix boot loops
2. Stop the over heating
3. Make battery last as long as possible
4. Fix the wake up issues. When I press power button to wake phone the capacitive buttons turn on but the screen doesn't.
These are the issues that I'm trying to fix. Like I said I'm currently on infection 2.9.1 using lastest hiro kernel. I need some helping finding the right kernel to use and what settings to use with kernel tuner or trickster mod app doesn't matter.
Sent from my Infected Rezound using Tapatalk 2
That kernel will replace hiro. You can set screen off freq upon flashing in recovery. The below pictures is my current settings for the past week and only had one freeze (it was testing something out for the kernel before released). In the picture, screen off and idle freq are disabled as you change settings when flashing the kernel. (During install, aroma will ask if you want to do default or custom install, custom for more options.) Pictures are in thumb format so less space is used in the forum. You can click link for bigger image
Sent from my Infected Rezound using xda app-developers app
Uzephi said:
That kernel will replace hiro. You can set screen off freq upon flashing in recovery. The below pictures is my current settings for the past week and only had one freeze (it was testing something out for the kernel before released). In the picture, screen off and idle freq are disabled as you change settings when flashing the kernel. (During install, aroma will ask if you want to do default or custom install, custom for more options.) Pictures are in thumb format so less space is used in the forum. You can click link for bigger image
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
OK thanks for the detailed instructions I'll try it and see if my phone improves.
Sent from my Infected Rezound using Tapatalk 2
You can change second core to something else. Lionheart is a performance based governor. I use it on second core with mpdecision having a longer wait to turn on core 1 for my personal optimal battery saving/performance. Core 0 is set for power save bias so only when I need speed, core 1 will kick on with some higher MHz while CPU 0 catches up a little later.
Battery savings isn't too great, but unless you are doing some CPU intensive stuff, it does pretty well on battery.
This is CPU times today... Mind you, I used my phone for a total of 4hrs from 530-1640. The reason it stayed at 192 a lot was because I just did texting, web browsing and some other low CPU intensive tasks so far today (about 20-30mins of awake time in 192 was screen off streaming a local radio station.) Ran buttery smooth though.
Sent from my Infected Rezound using xda app-developers app