Hi everyone,
Recently, I flashed the stock .587 firmware and made some tweaks in build.prop.
And data is not working now.
(even without tweaks data wasnt working)
Never faced this problem before (except for some custom roms)
I'm on baseband .77 and before flash stock ROM I was on .72
Started to think that baseband .77 IS NOT avaliable in Brazil.
Is this true? Do I need to flash .72 again?
The device is ST15
Already searched but didnt found anything about it.
Thank you...
try to flash stock rom again, in ftf file format using flashtool, not a flashable cwm rom.
Related
I've seen many roms uploaded here but do not know if they would work on my X10.
I have rooted it. Busybox and Xrecovery installed..
Firmware version : 2.1 update 1
baseband version : 2.0.46
Kernal version : 2.6.29
Build number : 2.0.A.504
I'm new to all of this so any help would be appreciated
I wanted to install this.. would it work on mine?
http://forum.xda-developers.com/showthread.php?t=865580
I think that ROM requires the 2.0.2.A.0.24 build number. You can flash the build firmware using flashtool. And then you can install this ROM with xRecovery I believe.
I've heard you can lose your 3g conenction, is this true? I'm on o2 in the UK.. does this matter?
You can lose your signals if you don't flash the correct baseband I believe.
ALWAYS make a backup of your original ROM before installing a new one, so that if any problem occurs or if youre unsatisfied with the ROM, you can revert back to the old one.
Hi All
I Am writing to ask if it is possible to flash the .52 BaseBand on .435 firmware
i have searched for this quite a lot but no answer has presented itself to me.
i really want to try FreeKernal Alpha but it cannot be used with .54 baseband which is what i have (i've tried and it just resulted in the phone rebooting as soon as it had booted up)
any help is much appreciated
thanks
To all the developers and members of XDA,
I bought an X10mini and found out that the firmware version is 2.1.1.A.0.16 , can i flash it to MiniCM6 2.2 ROM ? the baseband is M76XX-TSNCJOLYM-53404015 but the firmware is not 2.1.1.A.0.6..
I tried to to reinstall the ROM using PC companion and the version that i get is still 0.16 and not 0.6 .
I wonder if anyone here have the version same as mine and can i flash it to custom ROM ? i search throughout the treads and did not found any 2.1.1.A.0.16 available, is this the latest version or because the version is differ because of countries?
Any helps will be well-appreciated, thanks !
This is because you have the 2011 X10 Mini. Everything should work normally.
You have a previous FW, if you want to flash without fear, flash to the new FW and them flash it to MiniCM6 2.2 ROM.
You can use WotanClient, sign in the site of the program, it is free, and very easy flash with this program, and you can downgrade or upgrade your phone.
ok, Thank you for the information !
the important things are baseband and kernel, because when you upgrade to 2.2 or 2.3 the stock firmware will be replaced.
but before flashing with any rom kindly make a backup
hey,
i flashed cyanogenmod on my ray.. but after all u flashed the stock rom again from this forum (ftf via flashtool).
the thing is that SE companion software says (if i want to update /repair my firmware) that the firmware is modified and it wonmt update it. now my question: do i now always have to flash the new roms (for example when ICS will come) or is there a method to get back to the real stock rom so that SE companion will update/repair the firmware?
im on android 2.3.4. (http://forum.xda-developers.com/showthread.php?t=1316070)
its rooted and the kernel is still the one from the cyanogenmod (i think- well, i didnt flash any new kernels after cyanogenmod..just flashed the rom)
bootloader is unlocked
hope you can help me..thx
yes after unlocking bootloader you always have to install stock firmwares via flash tool
use wotan server , it is a great way to install stock rom
hmm okay thanks! .. btw is there a way to lock the bootloader again so i can install the firmware with SE again?
thanks for the tip!
Hi guys,
I have an Neo unlocked with Night Elf 1.5 kernel and King's ROM.
But I don't think I have already flashed to .587 firmware even though everything is working correctly.
My "About Phone" screen shows:
8x55-AAABQQAZM-203028G-70 ==> so I think I don't have 587 ? Is this correct ?
Now what I don't know is :
What version of FTF for the .587 do I need to use ? ( I live in Belgium.)
I have downloaded this :
Xperia Neov_4.1.B.0.587_India SI 1254-8966 by abhiheart (376 MB)
and
MT15i_4.1.B.0.587_Global (only 236MB)
I don't know if I need to use these 2 that's why I am asking.
Could you guys give me an link to the correct one ?
PS: What JB roms are fully working because the overview thread hasn't been updated in a while
Thanks!
What you wrote above(from about phone screen) is baseband. It can be changed without changing entire build.
What you need to check is build number, but since you flashed custom ROM, I kinda doubt it have stock build number.
But if we can take assumption that you didn't changed baseband on your own, then no, you don't have .587, you have .562
Android 4.0.4; 4.1.B.0.587 have baseband 77
Android 4.0.4; 4.1.B.0.431 have baseband 72
Android 4.0.3; 4.1.A.0.562 have baseband 70 (which wasn't even officially out for Neo)
Android 2.3.4; 4.0.2.A.0.62 have baseband 64
Android 2.3.4; 4.0.2.A.0.42 have baseband 56
p.s. forgot to wrote, ftf's are in sticky thread in general section
Hi
Thanks no I do not know how to change it by myself , I only flash things ;
MT15i 4.1.B.0.587 NCB, Nordic, CDF-1247-0875
multiupload(TnX to MScorpionZ): http://forum.xda-developers.com/show...&postcount=121
OR
google docs(TnX to petulinka1): http://forum.xda-developers.com/show...&postcount=123
These 2 are in the general section
Are those both for my country?
Why do they have different sizes ? ~230 or ~360 ?
Thanks
Kind regards !
Well, Belgium is not in Nordic region. But if you ask if it will work on your phone then yes, it will.
And about file size, have you check entire filenames/extensions?
Hi
Both have the FTF extension.
But both have different file sizes so ... I don't know ?
Maybe off topic: are there fully working JB roms except the JB port by Paranoid ?
Thanks.
SleejR123 said:
Both have the FTF extension.
Click to expand...
Click to collapse
No, they are not. One is a zip, other one is ftf.
Yes that is true, but when you unpack the zipped one then the size is still different
Kind regards
Ah, now I see what you were saying. Don't worry, files inside ftf are same size.
In few latest flashtool versions(to be more precise in 0.9.1.0 and above), created ftf's are compressed, while in older they were just packed in without compression.
You can use any of those ftf's, flashtool will extract both of them with no problems.