I tried to flash an ICS rom called XperienS over my current rom which is paranoid android 2.54 but it won't it just says install aborted error7 and a lot of stuff so please help me is this happening due to flashing ics over jb or an other thing ?
evil droid said:
I tried to flash an ICS rom called XperienS over my current rom which is paranoid android 2.54 but it won't it just says install aborted error7 and a lot of stuff so please help me is this happening due to flashing ics over jb or an other thing ?
Click to expand...
Click to collapse
Flash official firmware from sammobile via Odin or Mobile Odin, then root and flash XperienS. That's how I overpassed error 7.
99heitor said:
Flash official firmware from sammobile via Odin or Mobile Odin, then root and flash XperienS. That's how I overpassed error 7.
Click to expand...
Click to collapse
I'll try thnx
Related
i occured and accident and my firmware 2.3.6 was crushed....
and so i downloaded and upgraded to new firmware 4.0.1 ICS ...
ICS is so unstable and so many force close in my ph...
and there is so many error accouring...
plz help me to downgrade to my previous firmware version 2.3.6
plz guide me how to downgrade......
thz alot !!!!!!
Flash cf-root kernel using Odin and use cwm to restore your backp or install a fresh rom. Next time make sure you can undo what you do to your phone before you proceed. Saves everyone alot of headache
Sent from my GT-I9100 using xda premium
Or you can flash a stock ROM using Odin (do not tick repartition and do not use the PIT file), and do a wipe.
century367 said:
i occured and accident and my firmware 2.3.6 was crushed....
and so i downloaded and upgraded to new firmware 4.0.1 ICS ...
ICS is so unstable and so many force close in my ph...
and there is so many error accouring...
plz help me to downgrade to my previous firmware version 2.3.6
plz guide me how to downgrade......
thz alot !!!!!!
Click to expand...
Click to collapse
Flash a CF root kernal to get to recovery and restore or after flashing CF root kernal, format system , Wipe cache and Dalvik Cache. Flash the ROM through ODIN
Download a stock rom,go to download mode and flash it through Odin.ICS is currently unstable and still many apps are not compatible with it.So wait for CM9 or official or one with less bugs and stability.Know the risk before flashing.
Hello guys ,, I have downloaded VK ICS ROM V5.1.3 and i have put it in the internal memory of my device. I am now on the previous version of the same rom V5.1.2 , when i want to flash the new rom in the recovery mod,, it takes only few seconds no more than five seconds and says the installation was successful but actually when i reboot the phone, it stops on the first Logo which appears in the beginning of the Restart process. Although i do all the wipes before i start to flash the rom, i am unable to flash it
Plz help me
Guys I need help please
Flash thru odin instead, that might work
St0rmzx said:
Flash thru odin instead, that might work
Click to expand...
Click to collapse
the file is not appropriate except for rocoverymod so how can i flash it throw Odin !!!!!!
Flash to stock then flash to the new version, make sure the file isn't corrupted.
St0rmzx said:
Flash to stock then flash to the new version, make sure the file isn't corrupted.
Click to expand...
Click to collapse
I did that but still doesn't work
Guys !!!!!!! heeeeeeeeeeeeelp
Hi,
Did you tried another rom?
Flash a new kernel, (siyah) then re-download the rom and flash again
ruicc said:
Hi,
Did you tried another rom?
Flash a new kernel, (siyah) then re-download the rom and flash again
Click to expand...
Click to collapse
yes bro different roms are normally installed and i even changed my kernel to siyah but still the problem occurs !! the previous version which is 5.1.2 gets flashed normally,
Note:
I flashed to an official 4.0.3 rom and then rooted my device to flash this rom but doesn't work and i have this problem only with this version of VK roms other roms are okay ,,, even the Rom file (zip) is okay not corrupted !!
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
if you cannot install any rom i guess you can try to install an odin version . this should not give you any problem
Genrrally, there are 2 methods to flash ROM/kernel/modem: (1) using CWM recovery if you got hold of zip file; (2) use ODIN (PC needed) or Mobile ODIN app (PC-less flashing) if you have tar file. (Mobile ODIN can also flash zip file.)
Which method did you use to flash?
Sent from my GT-I9100 using Tapatalk 2
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
First upgrade the 'Philz' kernel to the latest v3.99 and then u can install any Custom Rom/Kernel of ur choice from its recovery
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
you can flash dorimanx kernel >Advance>reboot recovery..then you can install any rom you want to
Hi all,
I have a galaxy s2 GT-I9100 on baseband I9100XXLQ6 custom kernal Jeboo 3.0.31 v1.1c on Android 4.1.2 Lion rom JB I9100V1.3 problem is I want to load up Jelly bam but keep getting installation aborted in CWM recovery I wipe cache data and delvick, I've tried other roms like avatar and it also fails, do I need to do something else? do I have to update my firmware to XXLPQ?
Sorry if it's in the wrong section.
Cheers
You have to change your kernel:
Flash this using odin : http://d-h.st/hcS
And I hope u meant jelly bam
mohitgalaxy3 said:
You have to change your kernel:
Flash this using odin : http://d-h.st/hcS
And I hope u meant jelly bam
Click to expand...
Click to collapse
I changed my kernal via CWM to Jeboo.
SUPERSTARDJ01 said:
I changed my kernal via CWM to Jeboo.
Click to expand...
Click to collapse
I guess jeboo is preventing u to do that ... flash philz kernel and try then
Sent from my GT-I9100 using Tapatalk 2
Can I flash in CWM Siyah kernal?
Mr.KiLLeR said:
I guess jeboo is preventing u to do that ... flash philz kernel and try then
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Do you have a link?
is this it? http://forum.xda-developers.com/showthread.php?t=1901191 or this http://www.galaxys2roms.com/details/?r=1194
Sorry to be a pain but do I use XXLPQ-OXX ICS 4.0.3 or XXLSJ-OXX (Jellybean leak) i'm on i9100xxlq6
Or you can try flashing to a stock rom first and then retry flashing the custom rom
wishmas7er said:
Or you can try flashing to a stock rom first and then retry flashing the custom rom
Click to expand...
Click to collapse
Tried flashing Philz kernel and it still failed to install the rom saying installation aborted.
i said ROM, not Kernel...
go back to a stock ICS or GB rom if you want via Odin, and then retry the JB
wishmas7er said:
i said ROM, not Kernel...
go back to a stock ICS or GB rom if you want via Odin, and then retry the JB
Click to expand...
Click to collapse
Oh ok, where can I download it?
either here
http://www.sammobile.com/firmware/
or in the forum there is a thread too i think with stock roms
wishmas7er said:
either here
http://www.sammobile.com/firmware/
or in the forum there is a thread too i think with stock roms
Click to expand...
Click to collapse
Do I need to do anything with my kernel?
You dont seem to know the basics pal.The stock rom he linked contains kernel/modem/rom so have a guess what happens when you flash them to your phone.
{go back to your iphone since you are an android noob}
theunderling said:
You dont seem to know the basics pal.The stock rom he linked contains kernel/modem/rom so have a guess what happens when you flash them to your phone.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
TBH we all have to find out the info at some point and this is my time to find out.
True, but you have to know the basics before flashing or else youll be the one with the non working phone.
Eg.If you had read a little bit about nand backups, you could have your phone back to how it was in 5 mins, before you messed with other roms.
So once you have your rooted phone to your liking you make a backup.Then if you try another rom and dont like it, boot into cwm and restore your backup in 5 mins.
{go back to your iphone since you are an android noob}
theunderling said:
True, but you have to know the basics before flashing or else youll be the one with the non working phone.
Eg.If you had read a little bit about nand backups, you could have your phone back to how it was in 5 mins, before you messed with other roms.
So once you have your rooted phone to your liking you make a backup.Then if you try another rom and dont like it, boot into cwm and restore your backup in 5 mins.
{go back to your iphone since you are an android noob}
Click to expand...
Click to collapse
I have a nand backup of which I've been using, I've also made backup using mybackup so all covered, I've flashed several roms previously with no issues.
SUPERSTARDJ01 said:
Hi all,
I have a galaxy s2 GT-I9100 on baseband I9100XXLQ6 custom kernal Jeboo 3.0.31 v1.1c on Android 4.1.2 Lion rom JB I9100V1.3 problem is I want to load up Jelly bam but keep getting installation aborted in CWM recovery I wipe cache data and delvick, I've tried other roms like avatar and it also fails, do I need to do something else? do I have to update my firmware to XXLPQ?
Sorry if it's in the wrong section.
Cheers
Click to expand...
Click to collapse
It could be that the zip download is corrupted. Try re-downloading and flash again.
If not, flash Siyah v4 kernel via recovery or odin then try flashing desired rom again.
TheATHEiST said:
It could be that the zip download is corrupted. Try re-downloading and flash again.
If not, flash Siyah v4 kernel via recovery or odin then try flashing desired rom again.
Click to expand...
Click to collapse
Tried that and it aborted.
SUPERSTARDJ01 said:
Tried that and it aborted.
Click to expand...
Click to collapse
What aborted? Flashing the newly downloaded rom or flashing Siyah via ODIN and then trying to flash rom again?
If you cant flash rom after you have Siyah kernel installed then as mentioned above you will need to try and restock via ODIN.
Hi , i encounter error with flashing cyanoged based custom rom. I m on JB 4.1.2 neatromlite and kernel speedmod JB
always get error on buildprop, error 7 on cwm
please help
The file is corrupted. Check the md5
Sent from my Sensation XL using Tapatalk 4
ur zip would be corrupt download again n check md5
amdultra said:
Hi , i encounter error with flashing cyanoged based custom rom. I m on JB 4.1.2 neatromlite and kernel speedmod JB
always get error on buildprop, error 7 on cwm
please help
Click to expand...
Click to collapse
What version of CM is it your trying to flash?
sorry for late answer , i try to clean my rom using nuke script and it solve the problem
Flash latest philz kernel and try again. Cwm needs updating on error status 7.