Hi Guys,
I'm using LSJ and today I tried to install another ROM (like CM10) and is shown in recovey error code 7.
I'm currently using version NeatRomLite 23-Nov. It's the only one I use. I've used the recovery Phill and CMW and the same error occurs.
Someone has gone through this problem?
igorazevedo said:
Hi Guys,
I'm using LSJ and today I tried to install another ROM (like CM10) and is shown in recovey error code 7.
I'm currently using version NeatRomLite 23-Nov. It's the only one I use. I've used the recovery Phill and CMW and the same error occurs.
Someone has gone through this problem?
Click to expand...
Click to collapse
Flash Siyah kernel in ODIN then flash your rom as normal in cwm.
TheATHEiST said:
Flash Siyah kernel in ODIN then flash your rom as normal in cwm.
Click to expand...
Click to collapse
Thanks man. Work's perfectly.
I tried to flash an ICS rom called XperienS over my current rom which is paranoid android 2.54 but it won't it just says install aborted error7 and a lot of stuff so please help me is this happening due to flashing ics over jb or an other thing ?
evil droid said:
I tried to flash an ICS rom called XperienS over my current rom which is paranoid android 2.54 but it won't it just says install aborted error7 and a lot of stuff so please help me is this happening due to flashing ics over jb or an other thing ?
Click to expand...
Click to collapse
Flash official firmware from sammobile via Odin or Mobile Odin, then root and flash XperienS. That's how I overpassed error 7.
99heitor said:
Flash official firmware from sammobile via Odin or Mobile Odin, then root and flash XperienS. That's how I overpassed error 7.
Click to expand...
Click to collapse
I'll try thnx
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
if you cannot install any rom i guess you can try to install an odin version . this should not give you any problem
Genrrally, there are 2 methods to flash ROM/kernel/modem: (1) using CWM recovery if you got hold of zip file; (2) use ODIN (PC needed) or Mobile ODIN app (PC-less flashing) if you have tar file. (Mobile ODIN can also flash zip file.)
Which method did you use to flash?
Sent from my GT-I9100 using Tapatalk 2
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
First upgrade the 'Philz' kernel to the latest v3.99 and then u can install any Custom Rom/Kernel of ur choice from its recovery
saikat_ace said:
Hey guys i am currently on simplistic JB ROM that is the XXLSJ leaked ROM...philz kernel.....and i cant seem to install other ROMs such as CM10 and others........ when i get to install it says that installation aborted....even the siyah kernel cant be installed....what to do? :crying:
Click to expand...
Click to collapse
you can flash dorimanx kernel >Advance>reboot recovery..then you can install any rom you want to
I recently heard about PAC MAN ROM 4.2.2 for Galaxy GT I9100 which is hybrid of different ROMs like Paranoid, CynogenMod etc. I wanted to know how much stable is this ROM in terms of performance and battery life. Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
I have rooted S2 GT I 9100 with official 4.1.2, stock recovery and stock kernel.
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
I wanted to know how much stable is this ROM in terms of performance and battery life.
Click to expand...
Click to collapse
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
ssanjy said:
Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
Click to expand...
Click to collapse
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
immortalneo said:
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
Click to expand...
Click to collapse
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
ssanjy said:
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
Click to expand...
Click to collapse
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Donnie Sins said:
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Click to expand...
Click to collapse
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Flashing Kernels
cowen2006 said:
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
ssanjy said:
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
Click to expand...
Click to collapse
True:thumbup:
Restoring to stock
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
ssanjy said:
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
Click to expand...
Click to collapse
No, you need to do a back up to your pc first using kies preferably.....this will make sure its put back to stock standard for warranty purposes.
I thought s2/i9100's were too old to be warrant'd now?
Error in /emmc/...while flashing Pac Man 4.2
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
ssanjy said:
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
Click to expand...
Click to collapse
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Sun90 said:
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Click to expand...
Click to collapse
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
ssanjy said:
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
Click to expand...
Click to collapse
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Sun90 said:
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Click to expand...
Click to collapse
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
ssanjy said:
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
Click to expand...
Click to collapse
Yes
Sun90 said:
Yes
Click to expand...
Click to collapse
I still am getting "assert failed............(Status 7)
ssanjy said:
I still am getting "assert failed............(Status 7)
Click to expand...
Click to collapse
have u flashed the Dori v8.34 (tar File for ODIN) thro ODIN, if not try the same and see
Sun90 said:
have u flashed the Dori v8.38 (tar File for ODIN) thro ODIN, if not try the same and see
Click to expand...
Click to collapse
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
ssanjy said:
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
Click to expand...
Click to collapse
u cannot flash dori kernel from Stock recovery ma8 , instead Dwnld the V8.34 (.tar extension file ) from dori site and flash the same using 'ODIN' on PC. then reboot ur phone into dori kernel recovery and from there u do all the necessary wipes and install 'PAC' rom as per its install instruction's
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
thippesh said:
Hi friend
googled but, looks something different to ..
Im getting installation aborted status 7 during installation of kitkat
ROMs like cm-11-20140101-INFECTED-i9100 and super nexus
The same above rom has been flashed before worked well and no problem, now not able flash
tried using recovery.. original CWM apolo kernal(CWM), Philz kernal(CWM) and even TWRP
and deleted asserts in rom update scrip file still error status 7
But the thing is i can flash NeatROM lite using above Recovery
Im little scared i think it has been bricked?
Please help regarding above error
Click to expand...
Click to collapse
its not bricked, if it was bricked you can't even start the phone so no worries.
first make sure your phone is a gt9100, if it is try to flash something else (just for a test), or download a other rom, like slimsaber. Please give a report back :highfive:
You flash the CWM 6.0.4.5 (KK Compatible)?
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
COMMON PROBLEM !
1. if your in TWRP install blazing kernal to get the lower version of cwm
2. if your getting error on cwm flash an older version CM 10.2
3. that's it fixed
4. or if your in cm 10.2 and still getting error in the sense corrupted download
hope it helps :good:
Dampierre said:
Just use a up to to date CWM version. First, flash gustavo's Kitkat kernel, then flash a kitkat rom. For example, you cannot install a KK rom with 6.0.3.7 recovery. You need at least CWM 6.0.4.5 or TWRP 2.6.1, to be able to flash a KK rom. So, its not bricked or something.
Click to expand...
Click to collapse
Thank you all everyone to your kind replies and helping me out this problem,
has been solved by first flashing the gustavo's Kitkat kernel or kitkat Compatible Kernal
after that i can flash the KK rom
thanks thank you guys
-Marco said:
Exatcly. I raccomanded flash a KK ROM from CM 10.2 / ROM based-on-10.2
Click to expand...
Click to collapse
Does this mean I have to install ROM from CM 10.2?
This means I have to clean all my data n cache 1st. Thn install CM 10.2?
Thn clear data n cache again?
Thn install the Kit Kat ROM n GApps?
Yep