Related
EDIT : I am now offering a $100 reward via PayPal to anyone that can offer me a solution to this problem. If you do not have a PayPal account, I will mail you a check for $100. Those are my only methods for payment. I am 100% serious about this by the way. From what I'm told, Nandroid backups are stored on the internal SD card, so even once the replacement phone arrives, I could not restore the nandroid backups on the (currently) broken phone over to the new one. I absolutely HAVE to get to those backups, and it is well worth $100 to me. NOTE : to be eligible for the reward, you MUST read the entire thread. I have already exhausted many common solutions to problems like this one, and am getting tired of getting offered the same advice over and over. If you fail to read the thread and offer me a solution that I have already attempted, I will not give you the $100 reward, even if you later are the one that comes up with the solution to my problem.
Please delete my other threads, I can't edit the title on them and they are outdated now.
This is my situation in a nutshell.
Downloaded Obsidian v2, wiped and flashed it. (this is my girlfriend's phone) - she did not like 2.2, so I wiped data/cache and attempted to restore the nandroid backup I had made. After hanging on 'restoring data' for 30 minutes I rebooted the phone, and now I'm here. The phone boots to the Vibrant logo only, I can get absolutely no other logos to show up no matter what I do. I realize now that I needed to flash a 2.1 kernel prior to restoring the Nandroid backup, but on my Droid, when I restore a nandroid backup that includes the kernel, so I did not know this step was necessary.
I have downloaded Odin but I have NEVER used it, so I am completely lost there as well. As far as I know, I simply need to download Odin, and then follow one of the many methods to access download mode. I have tried about 15 different methods of holding the buttons on the phone, plugging in the USB cable at the right time, etc. etc. etc. None of the methods work. The phone boots up to the Vibrant logo each and every time, no matter what. I downloaded and installed the Kies software so the drivers should be installed.
What do I do now? The phone is not hardware locked because I've used the buttons to access recovery many times. Is there a step I'm missing when it comes to Odin or do I just download it and open it? PLEASE give me instructions as if I am a child, because obviously whatever I'm doing is not working. PLEASE no vague instructions. I do not know how to use adb, odin, or basically how to do anything at all with this phone. I am a Droid user, and after I get her phone back to the way it was I will never attempt to hack it again. Thank you.
edit : also, yes I have pulled the SD card/SIM card.
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
use Odin 1.3 or maybe higher
velocity92c said:
I'm ready to give up on this.. is it possible to return this phone to T Mobile for a replacement, and if so, will her nandroid backups and titanium backup info be stored on her SD card? Then I could just root her new phone and restore the nandroid backup and be done with it. I promise, once I find some kind of solution, I am never hacking a Vibrant again. Far too complicated to hack non-stock google phones.
Click to expand...
Click to collapse
I'm at work but do a search for odin 1.3 which worked for me. There is a thread that had all the files you need to get the phone back to stock kernel and all. If you haven't resolved the problem by tomorrow I'll try to find the thread for you or post the files if I can from my computer.
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Download Mode
velocity92c said:
I'm already using 1.3 and I've already downloaded the all in one pack of files I need. Still can't get past the Vibrant screen to use Odin. I'm guessing since nobody has responded back with a way to fix this that I'm hosed, so can I take the phone to a TMO store and get a new one?
Click to expand...
Click to collapse
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Email me [email protected]
The best phone in the world
I have literally tried every possible combination of holding down buttons, powering up, usb cable in, out, etc. etc. I searched the forum and tried at least 30n different "surefire" methods. Odin always sits there and does nothing, and the phone just goes to the vibrant screen.
jaliscojorge said:
Have you tried turning the phone off then while holding the volume down button only, have odin running and plug in the usb cable to the phone? It should power on into download mode like that.
Click to expand...
Click to collapse
I had to build an extremely ghetto Jig, which is just a 301kohm resistor going across pins 4 and 5 of a microusb plug. It sounds hard but its really not that bad, and unfortunately its the only way to get your phone into downloader mode if its hardware locked, like mine is.
As mentioned previously the phone is not hardware locked. I've accesssed recovery several times with the standard methods. Just got back from Tmobile and it will be a week before the new phone gets here. There has to be a way to fix this. Someone please help?
This is pretty weird because if the phone is not hardware locked, there's no reason that you can't get into download mode.
Just to be clear, so are you saying when you hold vol up + vol down ONLY, you will get vibrant screen?
Or when you hold volup + vol down THEN plug in the usb, it goes to Vibrant screen?
You need to be in download mode to use Odin, not recovery mode. Have you ever gotten into download mode via hardware? Was 'usb debugging' enabled? If so, go into download mode and follow Eugene's Froyo that doesn't brick.
I don't know how I can be anymore clear that the phone is not HWL and I cannot access download mode. I'm not trying to be an ass, it's just a very frustrating situation. I know you need to be in download mode to use Odin. I cannot get to download mode or this would be a cinch.
And to the poster before ^ this one, the phone goes to the Vibrant screen regardless of what button combination I press, or whether or not I hit any buttons at all. I've literally tried every combination possible, many many times.
I'm ready to throw this phone out the window. I have a hard time believing I am the only one to ever have this issue. It seems as though the answer to most problems is download mode + Odin but that does me no good.
Is there literally nothing else I can try?
From what I understand email thegreat520 he is supposed to be the guy to talk to I've heard it from a few posts
Still flashing
I know it can be frustrating, but excuse me for starting with the basics...
have you followed this youtube guide? I put it in the sticky because it was very helpful in my opinion.
http://www.youtube.com/watch?v=AnY7P14JSWQ
Here is another way I have not seen before:
http://www.youtube.com/watch?v=E9LYLoK1Qog
and why not post another
http://www.youtube.com/watch?v=rqxearzXrVY
I had the same issue search my post I used a froyo Rom when the phone 1st came out I download then something went wrong will flashing a new Rom I tried and tried odin did not work bc NO download mode I had got my phone the day it came out I just sent it back to tmobile pm ill explain how
Sent from my SGH-T959 using XDA App
Same issue
Used download mode many times, then did the same exact thing you did with the obsidian ROM. Now i cant get into download mode at all.
The method that worked 100% of the time previously (holding both volume buttons and then plugging the phone in while odin is runing) does not work. Tried a bunch of different methods and nothing.
There has to be a way to get around this.
OP, please try the method in the general sticky. It seems to fix the HWL issue.
WOW!
Without even plugging anything in, I:
1) Turned phone off
2) Held Vol. Down + Home button + Power
And that got me into download mode. I will proceed to try flashing back to stock now.
I have tried all the methods in the videos, and the issue is not related to the phone being HWL. It is not HWL. I have used the buttons to access the modes before. So please give me something unique to try besides a button combination, because none of them work. Am I literally the only one in the world that has ever had this problem before? I will paypal someone 50 bucks if they can help me fix this and that's not a lie. Her new phone won't be here for weeks and she is currently without a phone. Maybe I'm doing SOMETHING wrong but it is definitely not a button combination. I have literally tried them all, including with the USB cable in and out, and plugging it in at certain times during the process. Don't you normally get a charging icon when you plug the phone into the computer? All I get is the vibrant screen. Even if the phone is off, if I plug it into a computer without hitting any buttons, it turns on and goes to the vibrant screen. 50 dollars via paypal. You can't beat that. If you don't have paypal I will mail you a check, and no this is not a joke.
So I'm pretty much screwed huh? Can someone tell me if nandroid backups are stored on the SD card on the Vibrant? I will just wait til the new phone gets here and put the old SD card in the new phone and restore it if so.
I have yet to find an answer to this while searching for the past day, so I'm going to ask about it here.
My LG Optimus V's (just got it a few days ago as a birthday present) screen seems to be permanently blank... In case someone asks... yes, it is activated.
What Happened:
I rooted the phone using Gingerbreak 1.2, installed rom manager/clockwork recovery mod, then attempted to backup my phone in case something went wrong. However, when I started the backup, I noticed that the screen was completely blank. I was kinda freaking out, so I just took a shower while it did it's thing. When I came back, it was done creating the backup and it showed up in Rom Manager. After toying with some of the things I can do with it rooted (I only rooted it to see how much of a difference it would make without changing the kernel), I decided to recover that backup. When my phone restarted to recover the backup, the screen was blank once again. After waiting for over an hour, I concluded that it must have finished (since my HTC Hero would finish restoring and never reboot until I tell it to) and took out the battery. Afterwards, it would show the LG splash screen... then the blank screen.
What I Did:
I was thinking about the android screencast java application a few hours after my problem first developed. I plugged my phone into my computer, got adb working, and android screencast showed me that my phone was actually getting stuck at the clockwork recovery mod screen. I tried many things... I installed a CM7 rom, flashed 3 different recoveries, flashed an overclocked stock rom, etc. Eventually, I flashed the stock rom (no changes whatsoever) and stock recovery. Now I can hear my phone, but cannot see it. However, I should note that while using CM7 the same thing happened. The only difference being that I could use android screencast to see the screen (the phone was actually working) with CM7. Now with the stock rom, adb is disabled and I cannot see the screen or do... anything.
What I Think I Should Do:
I'm thinking about calling Virgin Mobile and telling them that my screen is defected. If they see the issue they'll probably think that it's a hardware issue (for all I know, it could be) and they'll probably give me a replacement. However, if anyone as had the same problem and fixed it, I would love to know.
I would love you hear your opinion on this and, if possible, a fix. Thanks in advance!
(JIC, if I posed in the wrong section, I'm sorry...)
you poor souls reporting the symptoms of getting the newer screen hardware from the optimus s in your v's don't number in the double digits yet, but it's getting closer.
I posted a fix on AndroidCentral, see it:
here
good luck! the fix has worked for everyone I pointed to it so far.
btw, the screencast idea is excellent!
crud. stock recovery, you may be SOL.
you'll probably have to boot into custom recovery to use screencast or adb now.
use the unplug phone -> pull&replace battery -> hold home+volume down -> keep holding, press and hold power until lg screen goes blank to enter recovery. maybe adb will work in stock recovery, I dunno.
Thank you very much for the reply!
Yeah, you're right, I'm probably SOL... I still have one option though! Theoretically, I should be able to turn on ADB without being able to see my screen. I know how to access the settings without seeing it, but navigating myself to the "Applications", "Development", "USB Debugging" may be a little hard. I will attempt to do so. I will report my progress in a bit.
However, if you (or somebody else) could provide screenshots of a step-by-step process to turn on USB Debugging in the stock rom (since it's kinda hard to do remember where everything is and screenshots of different phones is kinda different) then I would appreciate it VERY much!
I shall update this in an hour or so.
UPDATE (9/2/11 - 9 PM):
I'm going to take a break for now. Good thing I give everyone my Google Voice number, I doubt anyone will notice a change. I'm going to flash a stock rom onto my HTC Hero so I can figure out where things are on the LG Optimus V (Same screen size) in an hour or so. I'll update my progress in like 2 hours.
UPDATE (9/3/11 - 8:10 AM):
I have been unable to turn on USB Debugging and it seems to be because I don't know where the confirmation after turning it on is located. However, I should note that when I boot into (I think) recovery, "adb devices" states that the device is attached but offline. If there is a way to make it "online" from stock recovery then I would love to know. For now, I will try everything I can.
UPDATE (9/3/11 - 8:22 AM):
Ok. I plugged my phone into the back of my computer and now when I do "adb devices" it detects the device in recovery mode. However, when I try "adb shell" it says "- exec '/system/bin/sh' failed: No such file or directory <2> -". I'll try some more stuff, but does anyone have any idea of what I can do? Android Screencast doesn't work either, so that's not an option.
UPDATE (9/3/11 - 9:42 AM):
Crap... now it's indefinatly booting into recovery... I had something like this happen before, I'll report my status in an hour or so...
UPDATE (9/3/11 - 12:36 PM):
My friend finally got my phone booting out of recovery again! Now all I have to do is get "USB Debugging" on and it SHOULD work!
I <think> there's a key combination to power up into the bootloader. if you can find it with searching here and android central.
I haven't been able to track that down today. If you can get into the bootloader, you can fix it. Search for asadullah's fastboot root instructions here if you find a way to get into the blue screen (the bootloader, which fastboot talks to.)
otherwise, I'll be done taking the kids to the (ugh) pool in a few hours and I'll search more.
try pulling your battery for a few minutes and see if the reboot cyle stops that way, at least it might get into recovery or the rom.
glad you got back into recovery again, not too sure how to help at this stage though, since I can't find a way to get into the bootloader with a power-on key combo. just emergency mode (useless to the V since the firmware from LG is missing a file) and safe mode. boo.
there is a youtube video for enabling usb debugging on the v, maybe it'll help you find the right spots to press.
http://www.youtube.com/watch?v=nHal0hPNS6s
edit: you can also try to reboot into the bootloader with adb, even though it's missing the shell... it's worth a try, and if it works you can flash xionia recovery with fastboot and things would be a lot easier from that point.
Code:
adb reboot bootloader
if that works but you need more help, a battery pull is the only way to power off with the bootloader except "fastboot reboot" will try to boot your rom.
Awesome, thanks for the replies! I'm going to try your suggestions now. I'll let you know how things work out in a few hours. I would have replied earlier, but to my satisfaction there was a surprise party planned for me, lol. I will defiantly try these out now.
Once again, thank you very much. I honestly did not expect a reply for something that happens to such few people.
bigsupersquid said:
I <think> there's a key combination to power up into the bootloader. if you can find it with searching here and android central.
I haven't been able to track that down today. If you can get into the bootloader, you can fix it. Search for asadullah's fastboot root instructions here if you find a way to get into the blue screen (the bootloader, which fastboot talks to.)
otherwise, I'll be done taking the kids to the (ugh) pool in a few hours and I'll search more.
try pulling your battery for a few minutes and see if the reboot cyle stops that way, at least it might get into recovery or the rom.
Click to expand...
Click to collapse
I'm honestly not sure what my friend did, lol. She was just messing with it while it was, apparently, in recovery and it ended up rebooting and loading the rom. I, honestly, don't want to risk getting stuck in recovery anymore since taking out the battery for an hour didn't do anything... If I'm unable to get adb on using what I know from that video then I'll try booting into the bootloader. Like I said before, I'll report my status in a few hours. I really appreciate your help up to now!
EXTREMELY HAPPY UPDATE!!! (9/4/11 - 1:22 AM)
I was able to turn on ADB! I used what I learned from that video and how turning on ADB works on my HTC Hero to get it working and it's FINALLY ON! Now I can attempt to flash the recovery, kernel, and everything else in order to get it working! Thank you VERY much! I will let you know how everything turn out
Another Wonderful Update! (9/4/11 - 2:03 AM)
I have flashed the recovery.img (the Xionia CWMA one) and can see my screen in recovery! I haven't seen anything on my screen besides the LG splash screen so I'm overwhelmed with joy! I'm flashing a new ROM and the other stuff now!
Final Update! (9/4/11 - 2:09 AM)
2:05 AM - I see the rom's boot screen!
2:06 AM - I see the CM7 Mod boot screen!
2:08 AM - I see the UI on my screen and everything seems to be working! Thank you VERY much!
Quick question though... If I want to install a new ROM, do I need to flash the xionia anykernel one directly afterwards?
ah, excellent! glad it's working now.
you're the most persistent (and maybe technically apt) person I've helped with this so far.
I still think that using screencast was the best new idea I've seen yet.
yes, you'll need to flash the xionia kernel after flashing any rom or rom update.
roms come with their own kernel in the boot.img, and none of them currently out for the v have the video drivers from the newer sprint kernels.
right now, xionia kernel is the only thing that works.
and, you'll need to flash the key swap after changing roms, as well, but at least forgetting to do that won't take out your display.
now that you've got xionia recovery on your phone, it should be a lot easier next time.
Thank you for both the help and the compliment!
I don't like giving up when it's something I know I can do. I figured that if I was able to mount my SD card without being able to see the screen, I should be able to turn on USB Debugging as well. About the Android Screencast... I didn't actually think about it until it until I plugged in my phone while the screen was blank, ran "adb devices", and saw that my device was detected within recovery. I figured that I might as well give it a shot... and it worked.
Alright, that's what I figured. Hopefully someone realizes what's happening with refurbished Optimus V smartphones and ports the newer sprint kernels to the Optimus V. I feel like I got ripped-off though... I bought my phone "new" and got a refurbished one. I can't really do anything though, we're not technically supposed to be rooting our Virgin Mobile phones anyways, lol. I'll be sure to do that everytime now though. For now, I think I'm good with the Bumblebee rom.
Once again, thank you VERY much for your help! I know I would not have been able to fix my phone without your help.
EDIT:
Oh yeah, btw, if the Optimus V ever gets stuck in stock recovery, press the "back" button then "home" button to boot into the rom. Not sure why it works (I was never able to see the screen), but it worked.
There is a key combo!
First time caller long time listener... I bricked my own Optmus V with a bogus ROM. To boot into recovery without adb press (Home)+(Volume Down)+(Power) Now rocking CM7!
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
machv5 said:
i was trying to root a phone for someone and after odin completed it said it had failed.
the phone is a telus samsung t959d running froyo.
I followed the instructions from (I would post the url for the link but i am not allowed to.)cyanogenmod's wiki, after it failed I rebooted the phone and it got stuck on the screen in the attached pic. I have tried to boot back into download mode to no avail. From the screen it's stuck on I cannot get any tool to register the device as being present, adb, heimdall, zdiag, etc... I even tried fastboot out of desperation.Before I used odin I tried to get the phone to boot into the bootloader but it only ever went to either recovery or a normal boot and I tried every button press combo I could think of and found and nada.
Even running adb reboot bootloader just made the device boot normally. I think that if I could get it to boot to fastboot usb i could then try fastboot. I am new to rooting devices and have successfully rooted my HTC EVO3D and got s-off and simlock removed for any carrier. So I do know how to follow instructions properly, why flashing the recovery.bin failed I don't know and every fix I seem to find says BOOT TO DOWNLOAD MODE. if I could do that I wouldn't be having this problem lol. Anyway can someone please help me figure this out. Thanks. ANd if you need any further info please let me know. I don't want to have to give my friend my phone due to a software issue.
And YES I did pick PDA not anything else.
Click to expand...
Click to collapse
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
machv5 said:
I kept reading other threads and sadly I din't pully the battery first before disconnecting the usb and repartition may have been checked as I see that it does the as default for my version. Also i turned off ODIN as I was hoping a reboot of my computer might help. I will keep trying to find an answer till someone gets back to me. this post may not even show up if I can't do a second post if no one has replied first.
Everyone was a nub at one time wasn't it FUN hahahahahaha sob cry
Click to expand...
Click to collapse
I tried a jig and that didn't work. There must be some way of getting the device to give up on completing a task i no longer can give it due to ODIN being shut off.
Why is it that the "how to root/unlocks" never have the "if x fails then do these steps etc..." Had the how to had "pull the battery before disconnecting USB and don't reset or shut off ODIN" I wouldn't be in this mess. I realize that it's user beware but a few important steps like that in case of a fail would go a long way to you guys not shaking your heads. Instead of "silly nub hahahahahaha". No offence but I get that a lot and try to remember that when I teach someone how to use a computer. I am new at phones not at everything.
Further Developments Please can someone help?
I was giving someone a new memory card and they had a Samsung SGH-I896 it has an EB575152VA battery and the one I have the T959D has an EB575152VU battery. I exchanged my battery for hers by accident somehow and when I plugged my phone in it didn't go to the phone triangle computer logo screen it booted to recovery and said it couldn't charge the battery and kept rebooting to recovery. I got my battery back and it booted back to the phone triangle computer logo again. Grrrr....
The other thing I saw while the recovery screen was an error message that said
Code:
E:/data/fota not accessible
(may not be 100% accurate I don't have the battery to check right now but can get it again if need be) anyway I now see that there may be some light at the end of the tunnel. i have the correct stock firmware for the device I tried flashing it while in recovery but the phone kept rebooting before anything got done. My question is how can I get the dang phone to stop asking for Odin and go to recovery so I can flash stock firmware and ROM back to it? As I cannot as far as I know give it what it wants because I reset Odin and nothing seems to see that the phone is connected to the computer. I am going to try the other battery on a full charge to see what that does.
I am new at all this and want to get it fixed. I cannot afford to send it off to a service center and besides that I want to do it myself as I want to become a developer and droid technician. I would gladly donate to anyone but am still trying to get Google to accept my pay-as-you-go credit card and I don't have PayPal either. Which is really frustrating when it comes to giving back. I posted a Q&A on how to without PayPal or CC but as of the last time I checked no one has gotten back to me about it.
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
MultipleMonomials said:
The CyanogenMod guide is flat out WRONG. I've tried to change it, but anything I do is reverted in an instant. I also tried to use it to install the ROM only, ended up bricking my phone and it took me hours to unbrick. That's how I became acquainted with XDA.
So, to get this straight:
1. you're using the stock USB cable
2. you remove the battery
3. you hold volume down
4. you plug in the usb cable
5. after a few seconds, you release volume down
6. the screen does not display a yellow triangle with an android
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
That is correct. If you think that my idea below is a bad one or if I downloaded the wrong firmware package please let me know and /or you have a fix that will work? ty
I have though come up with an idea that may work. I am going to charge the "wrong" battery in erm the right phone lol and then use it to trick the device into booting into recovery instead of the cellphone triangle computer (CTC, for want of a better acronym) The I896 battery ends in a V not an ? (sorry can't rem don't have it on me) from the I896 model I think it is, plugging it into USB with the power off sends it to recovery with the "battery cannot be charged " message instead of the CTC screen.
I tried it but the charge in the battery was too low and rebooted. I am hoping that with a full charge (as long as I don't power on the phone first as this will make it go to CTC logo again.
I am hoping that I can install the update.zip that I made by first unzipping the T959UVJFD_firmware.tar I downloaded then unpacked and then repacked into an update.zip as I don't think that it will read the package as a tar file and if it's not called update.zip The recovery is still stock. If I get the phone working I am not going to try unlocking and rooting it again. I will just post two separate adverts one as a carrier locked device and the other one (higher of course to cover buying the unlock from Telus) as carrier unlocked and then I will buy the unlock code if the blah blah you get the drift. sorry for rambling on.
oh and I can't rem if I said this or not, In recovery it "E:/data/fota not accessible" I don't know what that means yet I have been busy with other things and haven't looked it up yet.
Since you can get into at least some version of recovery, your bootloader is intact and you should be able to unbrick it. You ought to be able to get into download mode using a download jig. You can get one on ebay for a few bucks or you can make one yourself. There's a guide floating around here somewhere that lets you make one from a microusb cable.
Posted from my Galaxy Tab with CM10
Hey all, this is my first android and I'm not the smartest sometimes. I tried restoring back to factory rom, and watched a bad how to vid. Basically i cleared data, system, cache and now realize i shouldn't have.
I'm not able to connect to the phone through usb. I have the drivers, but I can't see the phone.I can boot into cwm, and that is it. When i start it, it basically pulls up the LG screen, then a black screen.
I have a backup on cwm but get the md5 error.
Is it possible to put the sd card in my computer and download what i need straight to the card? Im also not sure what i need to download, if that does work.
Please let me know if there is any other info I can provide. Like i said im not the smartest sometimes, so dont be afraid to respond like im slow.
Cat Rancher said:
Hey all, this is my first android and I'm not the smartest sometimes. I tried restoring back to factory rom, and watched a bad how to vid. Basically i cleared data, system, cache and now realize i shouldn't have.
I'm not able to connect to the phone through usb. I have the drivers, but I can't see the phone.I can boot into cwm, and that is it. When i start it, it basically pulls up the LG screen, then a black screen.
I have a backup on cwm but get the md5 error.
Is it possible to put the sd card in my computer and download what i need straight to the card? Im also not sure what i need to download, if that does work.
Please let me know if there is any other info I can provide. Like i said im not the smartest sometimes, so dont be afraid to respond like im slow.
Click to expand...
Click to collapse
Can you install the Rom "The base .5". I assume so if you can get to cwm. I had this problem when flashing this Rom The first time. It did the same thing with the LG logo then go black. If that happens just reboot to cwm(May take awhile) and reflash "the base" again. That should allow it to boot the phone fully so you can at least use it till you can get all the way back to stock. I hope this helps. I have to crash now tho. I'll check back in the morning to see how it's going.
Sent from my UNLOCKED LG-E970 using xda premium
Are you trying to get back to factory settings or just get your phone running with the stock rom?
You should be able to just put the ROM on your sd card via computer if you have an SD card sleeve.
If you wiped your phone, it's my understanding that you're not supposed to when flashing the provided rom in development.
There's a posting in development, I believe, about restoring your phone to stock if you messed it up. LGNST or something.
Cat Rancher said:
Hey all, this is my first android and I'm not the smartest sometimes. I tried restoring back to factory rom, and watched a bad how to vid. Basically i cleared data, system, cache and now realize i shouldn't have.
I'm not able to connect to the phone through usb. I have the drivers, but I can't see the phone.I can boot into cwm, and that is it. When i start it, it basically pulls up the LG screen, then a black screen.
I have a backup on cwm but get the md5 error.
Is it possible to put the sd card in my computer and download what i need straight to the card? Im also not sure what i need to download, if that does work.
Please let me know if there is any other info I can provide. Like i said im not the smartest sometimes, so dont be afraid to respond like im slow.
Click to expand...
Click to collapse
The recovery won't generate a md5 sum (known bug). You have to generate it yourself. Connect your phone to adb and go to #4 in the FAQ here.http://forum.xda-developers.com/showthread.php?t=2006946
Note that there is no way to tell of the backup is corrupt since you are generating a valid code regardless of integrity.
Sent from my LG-E970 using xda premium
Murasakiii said:
Are you trying to get back to factory settings or just get your phone running with the stock rom?
You should be able to just put the ROM on your sd card via computer if you have an SD card sleeve.
If you wiped your phone, it's my understanding that you're not supposed to when flashing the provided rom in development.
There's a posting in development, I believe, about restoring your phone to stock if you messed it up. LGNST or something.
Click to expand...
Click to collapse
I tried re-installing .4 base which is what I had originally used. It let me choose the apps to instal, and made it to the "X" screen, but appeared to be stuck in a boot loop. I am going to try and download and install .5 via the sd card and see if that works. I'm not sure if LGNPST will work since I can't see the phone via usb. I will download it and give it a try though.
I also saw the guide in the general Optimus G forums for unbricking it.
http://forum.xda-developers.com/showthread.php?t=2010624
Since i cant really connect via usb, ill probably have to use a different method. Im hoping the usb issue is due to the computer im using and the original computer i used to root and unlock will work.
Cat Rancher said:
I tried re-installing .4 base which is what I had originally used. It let me choose the apps to instal, and made it to the "X" screen, but appeared to be stuck in a boot loop. I am going to try and download and install .5 via the sd card and see if that works. I'm not sure if LGNPST will work since I can't see the phone via usb. I will download it and give it a try though.
I also saw the guide in the general Optimus G forums for unbricking it.
http://forum.xda-developers.com/showthread.php?t=2010624
Since i cant really connect via usb, ill probably have to use a different method. Im hoping the usb issue is due to the computer im using and the original computer i used to root and unlock will work.
Click to expand...
Click to collapse
The method in that link is for phones that don't have official firmware to use with lgnspt. If you san get into download mode (power off phone ,connect usb,hold volume down and up plus power ) you should be able to lgnpst back to stock.
adfurgerson said:
The method in that link is for phones that don't have official firmware to use with lgnspt. If you san get into download mode (power off phone ,connect usb,hold volume down and up plus power ) you should be able to lgnpst back to stock.
Click to expand...
Click to collapse
Alright. I was able to get into download mode. I downloaded lgnpst. Do you have an idea where i would find the other necessary files? Again, total noob. Sorry for all the hand holding. You guys have been great!
Cat Rancher said:
Alright. I was able to get into download mode. I downloaded lgnpst. Do you have an idea where i would find the other necessary files? Again, total noob. Sorry for all the hand holding. You guys have been great!
Click to expand...
Click to collapse
You need to go to the IRC channel to grab the new version of lgnpst and the correct files.
Sent from my LG-E970 using xda premium
Cat Rancher said:
Alright. I was able to get into download mode. I downloaded lgnpst. Do you have an idea where i would find the other Didnecessary files? Again, total noob. Sorry for all the hand holding. You guys have been great!
Click to expand...
Click to collapse
Did you get your phone straightened out?
adfurgerson said:
Did you get your phone straightened out?
Click to expand...
Click to collapse
I'm traveling for work and on a work computer, so the IRC channel is blocked. Of course. I'm heading home tomorrow so hopefully I can get everything back to normal when i get on my home computer. (not having a phone sucks)
Do you all think it would be worth putting the base .5 on my sd card and flashing that, or do you think that wouldnt work? .4 is on there now from my original flash, but that won't work. Just curious.
Well is your phone up and running?
I would think it wouldn't cause harm to try and flash .5 onto it, your phone shouldn't get bricked from it.
i agree with Murasakiii
should be fine to run .5
DraginMagik said:
i agree with Murasakiii
should be fine to run .5
Click to expand...
Click to collapse
Welp, I think i earned the title of first bricked phone. It was able to get into recovery and download mode a couple days ago, but now it wont charge it seems. So i cant get it into any mode to do anything. Ive had it on the charger, wall and usb for a couple hours and nothing is happening. I wonder if i can take it back to my att store and try get a replacement. It is within my 14 day window, and there are "hardware" warranties. I have a feeling they will ask what happened and while i may not initially divulge everything, i sadly cant lie. And since its all my fault, i may chalk it up to learning.
i'd say the device started having issues with the USB. unable to see the device when plugged into the computer and the device won't take a charge. don't hear of too many authentic "bricking's" anymore...it can almost always be resurrected. but if the device won't take a charge your time to resolution is rather limited. good luck.
Cat Rancher said:
Welp, I think i earned the title of first bricked phone. It was able to get into recovery and download mode a couple days ago, but now it wont charge it seems. So i cant get it into any mode to do anything. Ive had it on the charger, wall and usb for a couple hours and nothing is happening. I wonder if i can take it back to my att store and try get a replacement. It is within my 14 day window, and there are "hardware" warranties. I have a feeling they will ask what happened and while i may not initially divulge everything, i sadly cant lie. And since its all my fault, i may chalk it up to learning.
Click to expand...
Click to collapse
Before you leave to go to the store hook it up to a set up jumper cables and then attach the other end to your car battery. Then just tell them when you tried to charge it that it started smoking and wont turn on any more.
The only lie you have to tell them is it happened on the stock charger.
Im on the same boat. Tried going back to stock for a warranty return, and i ended up bricking the phone. Im able to get it to download mode and was able to run the lg tool but it keeps failing on me. And when it does complete it still wont load. Im going to try to make my self a powerd usb cable too see if i can get it to work. Have like 2 or 3 days to try to figure it out. Or elese im out 550 bucks.
Sent from my LG-E970 using xda app-developers app
Other option is just telling them you clicked install for the ota update it rebooted and never came back on. They just wipe them at the repair center anyway if they get them to boot up.
Cat Rancher said:
Welp, I think i earned the title of first bricked phone. It was able to get into recovery and download mode a couple days ago, but now it wont charge it seems. So i cant get it into any mode to do anything. Ive had it on the charger, wall and usb for a couple hours and nothing is happening. I wonder if i can take it back to my att store and try get a replacement. It is within my 14 day window, and there are "hardware" warranties. I have a feeling they will ask what happened and while i may not initially divulge everything, i sadly cant lie. And since its all my fault, i may chalk it up to learning.
Click to expand...
Click to collapse
It took 12 hrs to get a clean download of the stock ROM (AT&T internet sucks in my area). The entire time the screen on my phone was on with the LG splash screen displayed. By the time I got the ROM ready for flash, the battery was dead. I was however able to plug in to the USB on my computer and get enough juice to get into download mode. Ran LGNPST (v2.2.3) and the stock ROM installed with no prob. You might try plugging it in then trying to get into download mode.
EDIT: now that I think about it. You need to have it plugged in to the USB before download mode anyway, so you won't be doing anything different than you already did.
This may turn out a bit long...
My s2 has been playing up in one way or another for a few months now such as freezing, turning itself off and kept going into drive mode by itself then last week all my messages deleted and I couldn't send or receive any more and then the next day it turned itself off and I can't get it back on properly. It turns on, goes onto the Samsung Galaxy S2 screen then onto the O2 welcome screen then to the screen with the flashing S then just goes between that and the O2 screen over and over again. Been looking for help the last few days and the main thing I could find was to go into recovery mode and restore it but I can't do that because my home key doesn't work. So nor could I do the second thing I read could help which was to go into download mode and flash it. I didn't even know anything about recovery mode, download mode, flashing, rom, odin or anything else until last week. My phone is exactly as I bought it. I then read about a usb jig which would force it into download mode which I got today and it didn't do anything. I actually couldn't care less about the phone, I would love to just smash it to bits! BUT is there any chance I will ever be able to do anything get it back on just once so I can get my photos and videos off it? I've connected it to the computer but it comes up as an Android Modem so that I can't get the files off that way and it won't connect through Kies either. I know sending it to be repaired would end up with it coming back totally wiped so no point doing that. I normally wouldn't be so bothered it's just there's pictures of my daughter's first birthday and holiday and videos of her first steps. Is there anything else that can be done? Thanks.
There's a 0.000001% chance the phone will boot normally & your stuff will be intact if you can get into download mode & flash a one part stock rom. The more likely scenario is you'll need to flash a 3 part rom which will wipe the device.
You could try ADB to get into download mode, but you're going to need to be motivated to learn how to use it (plenty of tutorials on XDA/elsewhere; search). If that doesn't work for whatever reason, try fixing the home button.
Being a former betting man though, I don't like your chances of recovering data.
MistahBungle said:
There's a 0.000001% chance the phone will boot normally & your stuff will be intact if you can get into download mode & flash a one part stock rom. The more likely scenario is you'll need to flash a 3 part rom which will wipe the device.
You could try ADB to get into download mode, but you're going to need to be motivated to learn how to use it (plenty of tutorials on XDA/elsewhere; search). If that doesn't work for whatever reason, try fixing the home button.
Being a former betting man though, I don't like your chances of recovering data.
Click to expand...
Click to collapse
Thanks for replying. I don't have a clue what a one part or three part rom are sorry! Doesn't look good then. I'm so annoyed. I had planned to sort through my files and get them backed up last weekend because I knew this would end up happening and the stupid phone died on Thursday! I don't think fixing my home button would help because the volume button didn't work much either, it's a wreck to be honest! Had a quick look at ADB, looks complicated but I'll have a proper look later on as a final hope otherwise I'll just have to accept my files are gone for good
Just an update...tried to get into download mode with adb but it doesn't find my phone. Is this because it only comes up as an android modem by any chance? Think I may have to give up hope. At least I will learn from this and back things up a lot more often!