Related
Hey guys, need help with my LTE 10.1 Tab...
If I remember correctly, I did the root located here:
http://forum.xda-developers.com/showthread.php?p=16321915#post16321915
Anyhow, after weeks of clicking away from the update that was pushed to my device I finally clicked it like an idiot and now I'm stuck on one of two things, it either boot loops at the Samsung Galaxy TAB 10.1 screen or goes past that screen and sits at a black screen.
I have access to ODIN3 Download Mode and it says "Waitting USB Cable..." but can't get USB to recognize my device even though it did recognize it prior to going down. If I click the Android Installer box option, it just reboots and keeps doing the same thing.
Any help would be greatly appreciated. I'm deploying for 10 months soon and would love to have my tablet to take with me... Thanks!
I have the same trouble with my Galaxy Tab 10.1 LTE, if you have found a solution, please help
higabyte said:
Hey guys, need help with my LTE 10.1 Tab...
If I remember correctly, I did the root located here:
http://forum.xda-developers.com/showthread.php?p=16321915#post16321915
Anyhow, after weeks of clicking away from the update that was pushed to my device I finally clicked it like an idiot and now I'm stuck on one of two things, it either boot loops at the Samsung Galaxy TAB 10.1 screen or goes past that screen and sits at a black screen.
I have access to ODIN3 Download Mode and it says "Waitting USB Cable..." but can't get USB to recognize my device even though it did recognize it prior to going down. If I click the Android Installer box option, it just reboots and keeps doing the same thing.
Any help would be greatly appreciated. I'm deploying for 10 months soon and would love to have my tablet to take with me... Thanks!
Click to expand...
Click to collapse
you used rom manager to flash the cwm?
if yes,install driver for your tab.
go to this theard http://forum.xda-developers.com/showthread.php?p=16804945#post16804945 .and download file lterec
.tar.7z on post #16 and flash with odin.
hope to help
Sent from my SCH-I905 using XDA App
Well I took it into the local Verizon store and since the battery was dead from boot looping they just had a new one shipped to me under warranty... We'll see how this turns out...
higabyte said:
Hey guys, need help with my LTE 10.1 Tab...
I have access to ODIN3 Download Mode and it says "Waitting USB Cable..."but can't get USB to recognize my device even though it did recognize it prior to going down.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
This was is what was happening to me so I could not get ODIN access from the computer because the USB device was unknown even though the Samsung's driver were installed.
After some digging around I ended up installing Kies 2.0 even though this is an LTE. That did the trick. The computer recognized the device and I had ODIN access. Hope this helps someone. I know that frustrated feeling.
similar situation happened to me.
Fixed using the instructions posted here for Team Overcome.
In brief, gives you a stock firmware to flash, clean the phone, install Overcome rom with root, adds CWM, all is just fine afterwards.
Nothing like bricking your new baby first day out! Yeah, this does help fix things.
hi guys
i have very very big problem so cant do anything now!!
first week when i bought tab 10.1(3g+ wifi) , i get root with this
warning : don't use this any way : warning
this way very easy : without any change copy this to tab & let it from recovery mode
everything goes very well until i Decide to install cmw , busybox
in this time's so tab let graphic problem
of course with install a rom (P7500JPKL2_P7500OJPLB1_P7500XXKL3_HOME.tar.md5)
only graphic problem resolve
since yesterday i decided to change everything
told me :install stock rom & install cmw , reroot , busybox & ...
go stock rom (P7500OXAKI1_P7500XXKI1_P7500XXKI1_HOME.tar.md5)
after install this everything was bad
now i have graphic problem in boot , download mode , recovery ,... every where
of course i can install rom hard (with problem can sense where are you)
but with both of rom not changed
i realize problem is rooted then to make change with change the rom
it seems the problem is software
how can re wright everything as first (boot loader , rom , ...)
please help me
sorry fo bad english
regards.
I can hardly understand that... But if you want to go stock go to SamMobile.com and go to the firmware section.. Once there use the search option and look for p7500, choose a stock Rom from the list and download..
Once done, install Kies to get the drivers, with drivers installed put the tablet in Odin mode (turn it off then press volume down+power) select the download mode and connect the tablet to the computer.
Once done, open Odin and don't change any option there.. Go to pda and select the file you downloaded from SamMobile and Press start..
That's it
Sent from my Galaxy Nexus using xda premium
hi
thank for replay
forgot first post
my new problem is : boot loader was remove
a tools & boot loader to write
sorry for bad english
no any way to install ubuntu Instead of android
http://www.ubuntu.com/devices/android/features-and-specs
[email protected] said:
no any way to install ubuntu Instead of android
http://www.ubuntu.com/devices/android/features-and-specs
Click to expand...
Click to collapse
Over in the development thread there is this... little bit over my head, but have a like at it.
http://forum.xda-developers.com/showthread.php?p=16058447
The only problem with that link you posted is that you'll need working Android OS, so you would still need to get your Tab up and running again. Also from what I've read in that link its not an Ubuntu os that runs natively on our Tabs. It sounds like it just uses your device as a host or something, it only boots up when your device is docked to a computer and uses its screen, keyboard and mouse.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Over in the development thread there is this... little bit over my head, but have a like at it.
http://forum.xda-developers.com/showthread.php?p=16058447
The only problem with that link you posted is that you'll need working Android OS, so you would still need to get your Tab up and running again. Also from what I've read in that link its not an Ubuntu os that runs natively on our Tabs. It sounds like it just uses your device as a host or something, it only boots up when your device is docked to a computer and uses its screen, keyboard and mouse.
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
Actually you just have to connect it on a screen with HDMI. No need for a computer. Somehow Ubuntu takes over when it detects HDMI out from the dock. It has to be a pretty decent device though. At least dual core and one gigabyte ram... Oh well, we just have to wait until canonical releases it!
Sent from my Nokia 3210
hi
thank for replay
no any idea for bootloader for android3.2
(http://forum.xda-developers.com/showthread.php?p=16058447)
i can use it as 3g version & get 3g future
1-it's better than ubuntu on busybox or no & anyone can talk with it
2-touch problem resolve or not
3-anyone can overclock to better performance
please help me
i need bootloader for my tablet(android 3.2)
I showed the device to serviceman & he said me fee's between 80-90$
sorry for bad english
thank again.
Im really concerned... ir you are not able to read or write english and can not even get your tab back to stock how in hell did you went through flashing ubuntu to a tablet , also managed to blow up your bootloader doing so... why in hell do you even need ubuntu on a tablet? there's no app store and it's glitchy as hell... Also no hwa and no 3g modem only wifi.... If you manage to get to Odin mode follow the instructions I gave you or go pay your 90$ for repairings and for God sake stay away from modifying ANY device until you can properly read English and follow instructions....
may I ask you where are you from? If you talk Spanish you can pm me and I can help you better
Sent from my GT-P7500 using xda premium
msedek said:
Im really concerned... ir you are not able to read or write english and can not even get your tab back to stock how in hell did you went through flashing ubuntu to a tablet , also managed to blow up your bootloader doing so... why in hell do you even need ubuntu on a tablet? there's no app store and it's glitchy as hell... Also no hwa and no 3g modem only wifi.... If you manage to get to Odin mode follow the instructions I gave you or go pay your 90$ for repairings and for God sake stay away from modifying ANY device until you can properly read English and follow instructions....
may I ask you where are you from? If you talk Spanish you can pm me and I can help you better
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
I don't think he installed Ubuntu... I think he may have flashed the wrong rom with a different bootloader... But ya OP I'm having a hard time understanding exactly what you need and how we can go about helping you more...
Can you link us to the files you used to root and any thing you flashed to your Tab?
Sent From My Galaxy10. 1 Class Starship...
hi
thank for replay
i'm iranian(persian) & my language is farsi
sorry for bad english :laugh:
forgot everything i posted
first of thing i need fix & recover my tablet:
i need bootloader
next : i like test ubuntu:
on android with busybox
"important of all i need to fix my tab & recover it to android 3.2
so
i need bootloader with tool's needed"
then safe way to root->cmw->busybox->linux
[email protected] said:
hi
thank for replay
i'm iranian(persian) & my language is farsi
sorry for bad english :laugh:
forgot everything i posted
first of thing i need fix & recover my tablet:
i need bootloader
next : i like test ubuntu:
on android with busybox
"important of all i need to fix my tab & recover it to android 3.2
so
i need bootloader with tool's needed"
then safe way to root->cmw->busybox->linux
Click to expand...
Click to collapse
1.- press power + volume down until the tablet turns on into bootloader and move to downloading with volume down... Once you are in downloading press volume up and you will be in Odin mode. (look at reference image at bottom)
2.-download samsung Kies here and install to get the drivers
3.-download samsung stock rom here search for P7500 and get a rom according to your country/region once downloaded unzip it
4.-get Odin here
5.-connect your tablet to pc (check your usb wire its good and use a back motherboard usb port) , open Odin and Press PDA, in PDA put the file you downloaded from sammobile and unziped then Press start (do not change any Odin's options from the check boxes)
6.-wait until process finish and then you are back to stock close Odin and by this time the tablet should be rebooting.
if you are not able to recover your tab with all this then go pay
Sent from my GT-P7500 using xda premium
image for point 1
Hi all, unfortunately, i have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)"..
Is this the problem maybe?
Please help me..
Sorry for my bad english, I'm italian..
#UP
No one can help me please?
Did you use MTK droid tools to make a backup? I know you may have done this all ready, but did you download the drivers and checked in device manager on your computer to see if you can see the phone? Sometimes if you remove the battery, and connect it to the computer. (with a good USB lead ) it should install the phones drivers. Did you also install adb on your computer? As if you did, you should be able to get into recovery. By typing adb reboot recovery and it should boot into c.w.m. recovery. Hope this helps. I'm still getting used to mine. Sorry I can't help with more advice, hopefully someone on here can help.
Sent from my I9389 using xda app-developers app
hey everyone i need your help unbricking my haipai too, i deleted some system apps now its restarting (bootloop in android loading screen, sometimes launcher appears for some seconds and bootloop again) and i think its because of the s4 water apk - can somebody pls upload this apk or better all system apks from i9389 ? cant extract the system.img from needrom... and i didnt have a special cable to flash via sp tool. i got this phone yesterday it was great as i say i deleted some and after reboot all fun is gone ;P
Hi. I just did the same thing. Got rid of s4 wate r and now continual boot loop. I cant get into titainium to get it back.
Sent from my GT-P5110 using Tapatalk 2
Hi. Can anyone help with this topic. I have rooted my i9389. Backed it up with titanium. The whilst removing some bloat whare have sent my phone into a boot loop. I have no pc just a tablet. And when I did manage to connect to a pc it would not recognize the phone. When I turn it on and try to open back up or titanium or anything else for that matter it loops before I can get anywhere. Please help.
Sent from my GT-P5110 using Tapatalk 2
Mine died ...getting no network and signal and I know its not my sim card.quite a few have died this way.
Sent from my Blade using xda app-developers app
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
xdanewbie2014 said:
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Click to expand...
Click to collapse
As long as you can access download mode you should be able to get the device working again. I'd try heimdall (get suite 1.3 I believe) instead of Odin. It usually works better. You just need to find the Odin stock package for your device.
Sent from my YP-G1 using XDA Free mobile app
xdanewbie2014 said:
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
Click to expand...
Click to collapse
No you didn't break your device forever. All you have to do is install your stock rim that suites your device and flash it with hemidall
Sent from my YP-G70 using XDA Free mobile app
Hi
I have found all the files I need here
http://forum.xda-developers.com/showthread.php?t=1531850
BUT I cant get the device into download mode. I start the device with Powe+vold down+home key and it asks me to press vol up to continue. However, when I press vol up I get the "firmware upgrade encountered an issue" error.
Boy am i learning now
Thanks - xdanewbie
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
xdanewbie2014 said:
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Is This Progress ?
obscuresword said:
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Click to expand...
Click to collapse
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
Did you try getting the 4.2 drivers from Samsung Kies and then using zadig? Also it seems like you're using an S2 restore, which isn't for your device. The comment I linked you to is for restoring a YP-G1 so you would have to get the right heimdall package for your 4.2 like zaclimon said.
Sent from my YP-G1 using XDA Free mobile app
zaclimon said:
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
xdanewbie2014 said:
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
Click to expand...
Click to collapse
I think you are going to have to use Heimdall for this. Try and get the drivers installed for this device, and see if zadig picks it up.
Day 4
Hi
OK. It appears that I can either setup my PC to Use Heimdall (which requres the samsung KIES drivers NOT to be installed) or Odin (which requires the drivers to be installed)
I have now deinstalled the kies usb drivers, run drivecleanup to remove the old usb entries and downloaded Heimdall 1.3.1. When I run zdiag it picks up the samsung usb driver and install the heimdall driver.
Im trying now to use the rootted rom available (which seems ok for odin) available at
http://forum.xda-developers.com/showthread.php?t=1884071
However, if I try to use it with Heimdall 1.3.1 it says missing firmware.xml
I have a friends galaxy 4.2 also. Is there any way to extract the required info from that device or can anyone give pointers to where i might find a heimdall package for the YP-GI1CWXEU
Thanks - xdanewbie
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
drakonizer said:
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
Click to expand...
Click to collapse
Hi
Thanks for your help. I have the rom from the link above but where would i get the pit file from ?
Thanks - xdanewbie
Update: I found the PIT file for the international 4.2 version. I used odin 3.04 with the pit file followed by the rom and my device its now working again Is there any way now to get rid of the Salaxy S2 logo ?
Either way, many thanks to all who helped and I hope this thread helps those who were as silly as I was !
Thanks - xdanewbie
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
drakonizer said:
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
Click to expand...
Click to collapse
Hi I used this usb jig which not nly removed the yellow triangle but thegalaxy S2 logo as well. My player now looks exactly like it did before.
http://www.ebay.co.uk/itm/Micro-USB...UK_Mobiles_Accessories_RL&hash=item4ab688d076
PS: For those who may be interested, 4.2 case seem very expensive. I purchased this (whch is for a galaxy S2) and its a perfect fit but you need to
extended the button holes with a dremel.
http://www.ebay.co.uk/itm/Luxury-Ge...lePhonesCasesPouches&var=&hash=item48626b4b8c
Many thanks to all those who have helped a newbie learn a little bit more.
xdanewbie
Hello , I have a Samsung Galaxy Tab 10.1 GT-P7510 and i tried to root using a guide from this forum . After odin injected ''recovery.tar.md5'' everything was ok , but when i tried to open recovevery mode to unzip i can see only many letters on blue and back passing too fast , so nothing could be read and right after this my tablet turned off and when i turned on everything was in Chinese , Help me pls ! I'm very confused
I'm pretty sure you'll need to flash the US bootloader in Odin to fix the rolling screen. Search around in the forum and you'll find the file you need. And don't worry, your tablet isn't broken, it's just a bit "confused". Flash that bootloader and it will just fine. If you can't find the file just let me know and I'll dig it up from my office computer tomorrow.
Sent from my p4wifi using XDA Free mobile app