Hi all, unfortunately, i have bricked my phone, and it now can't turn on..
I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..
My computer see the phone as "MTK USB Port (COM6)"..
Is this the problem maybe?
Please help me..
Sorry for my bad english, I'm italian..
#UP
No one can help me please?
Did you use MTK droid tools to make a backup? I know you may have done this all ready, but did you download the drivers and checked in device manager on your computer to see if you can see the phone? Sometimes if you remove the battery, and connect it to the computer. (with a good USB lead ) it should install the phones drivers. Did you also install adb on your computer? As if you did, you should be able to get into recovery. By typing adb reboot recovery and it should boot into c.w.m. recovery. Hope this helps. I'm still getting used to mine. Sorry I can't help with more advice, hopefully someone on here can help.
Sent from my I9389 using xda app-developers app
hey everyone i need your help unbricking my haipai too, i deleted some system apps now its restarting (bootloop in android loading screen, sometimes launcher appears for some seconds and bootloop again) and i think its because of the s4 water apk - can somebody pls upload this apk or better all system apks from i9389 ? cant extract the system.img from needrom... and i didnt have a special cable to flash via sp tool. i got this phone yesterday it was great as i say i deleted some and after reboot all fun is gone ;P
Hi. I just did the same thing. Got rid of s4 wate r and now continual boot loop. I cant get into titainium to get it back.
Sent from my GT-P5110 using Tapatalk 2
Hi. Can anyone help with this topic. I have rooted my i9389. Backed it up with titanium. The whilst removing some bloat whare have sent my phone into a boot loop. I have no pc just a tablet. And when I did manage to connect to a pc it would not recognize the phone. When I turn it on and try to open back up or titanium or anything else for that matter it loops before I can get anywhere. Please help.
Sent from my GT-P5110 using Tapatalk 2
Mine died ...getting no network and signal and I know its not my sim card.quite a few have died this way.
Sent from my Blade using xda app-developers app
Related
Hey guys. So, I bricked my phone. I installed RomManager, then ClockworkMode through it, thus I knew that this phone is not supported. It wasn't there in that list, so I chose Commtiva z71 or something like that. My phone doesn't get in download mode anymore. Could this be fixed at home? I really don't want to take it to a service centre.
Please help me. Thanks!
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
after rooting my phone samsung galaxy 5 doesnt turn on
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Jordanooo said:
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I5500 using Tapatalk
Threw it guys. It sucked anyway.
It doesn't suck, its amazing
Sent from my GT-I5500 using Tapatalk
dead ur smart
quebeco said:
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Click to expand...
Click to collapse
Exactly as u .i try to backup my rom and my samsung was dead in 5 seconds.I sent them to service twice The firt my motherboard is dead and i wait the second time because i thing is dead again I dont use rom manager never
did you tried to download ClockWorkmodRecovery(cwm) than flash with odin multi downloader and then wipe data?
first step i found in solving this issue
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
no need
rstar900 said:
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
no need to pull battery out and insert it back just insert the battery ,hold down the option key & insert usb cable thats it....but none of these gonna work you will need JTag to flash
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Bhargav97 said:
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Click to expand...
Click to collapse
That's not true, sadly. ROM Manager embeds a version of flash_image that will try to flash a boot image to bml8 if the device is not properly recognised. That's what happened for the OP, so a JIG will not resurrect the phone.
Oh...Sorry, I didn't knew that! So, final option left for OP is a JTAG flash.
@psyke83
Seems like out of your 3 bricks, this is one.
Hi All,
Today, dropped my S2 and touch screen got shattered completely.. Phone powers on but no display at all.. I had set password to unlock screen..
I want to take backup before sending for repairs.. Googled a lot but no clear ans or procedure.. Pls help me as i need to backup precious data on my PC. Tried using Kies but reports "connection locked" error asking to unlock the device. Screen not working so cant unlock it :-(
M a newbie so detailed explanation will be helpful..
Rgds,
Broken screen
If you can't connect your mobile to the PC it will be so hard look for backup!
But... I am thinking that...
Maybe you can flash a new ROM...
if you can go in DOWLOAD MODE...
but i suppose that your settings, as the password, will remain active... maybe a modded ROM.
Sent from my GT-I9100 using XDA App
Can't you just see the internal sdcard when you plug in the USB cable to your PC as a disk?
Sent from my GT-I9100 using Tapatalk
Connect fone to Kies once connect you should be able to enter PW via computer. And so be able to back you your fone...
Nyssa1104 said:
Connect fone to Kies once connect you should be able to enter PW via computer. And so be able to back you your fone...
Click to expand...
Click to collapse
Thanks for your response. I tried but Kies (v2.1.0.11112_41) reports connection locked error and suggests to enter password on connected device. I cant since whole screen is broken and its completely blank :-(
alinefr said:
Can't you just see the internal sdcard when you plug in the USB cable to your PC as a disk?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for replying.. I dont have SD card in it.. Just bought phone abt a month ago and was planning to order one..
Skyman1 said:
If you can't connect your mobile to the PC it will be so hard look for backup!
But... I am thinking that...
Maybe you can flash a new ROM...
if you can go in DOWLOAD MODE...
but i suppose that your settings, as the password, will remain active... maybe a modded ROM.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Humm.. Phone is detected in device manager as Samsung USB composite and Modem device but Kies (2.1.0.11112_41) reports connection locked error. M wondering if there is another tool/driver that can allow to either unlock device from computer or get access to file system on phone. Kindly advise..
brokenscreen said:
Hi All,
Today, dropped my S2 and touch screen got shattered completely.. Phone powers on but no display at all.. I had set password to unlock screen..
I want to take backup before sending for repairs.. Googled a lot but no clear ans or procedure.. Pls help me as i need to backup precious data on my PC. Tried using Kies but reports "connection locked" error asking to unlock the device. Screen not working so cant unlock it :-(
M a newbie so detailed explanation will be helpful..
Rgds,
Broken screen
Click to expand...
Click to collapse
how much are u paying for the repair?
i charge 145
broken screen
i also managed to break my gs2 screen today. ive taken it to vodafone however they claim that for data protection they have to wipe all data on the phone if you have found a solution i beg you to get in touch.
simple method:
1.put the phone in download mode
2.download the tar file of a custom kernel(like siyah) which can mount your storage from cwm.
3.flash the file via odin and enter cwm.(press the key combo to enter cwm)
4.now ask some other users who use the same kernel to tell you the number of key press needed(and in which direction) to mount your sd card.
5. now your internal sd will show up in pc.
6. backup all the data now.
you can also backup all your apps +data using step 4
replace it yourself, it is dead easy...google youtube for an instruction video (did replace my daughters SGS2 broken screen in under half an hour)
hello My Samsung Galaxy SII has a broken display and i need to connect it up to retrieve key data but it won`t connect to kies...is there any way that i can?
Display is black. Phone is working ok
Can you help me? :crying:
You should be able to pull your stuff with ADB. Google and/or XDA search should yield you plenty of tutorials/how-to's on using ADB.
Edit - Provided you had debugging turned on prior to the display being broken.
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
Lg-730 boost mobile.
OK guys I have this phone hard bricked at the moment. It does the notorious boot loop. LG restore does not work.
I need to be able to flash the original firmware via USB emergency mode.
I've tried the LG cdma software, but it that failed to register the .dll!
Is there any other way to flash the firmware?????
Help please I have this beautiful phone just collecting dust on my desk.
Thank you. Kudos.
Sent from my C5170 using xda app-developers app
not workinh...yet
I also have this phone with android 4.1.2and just downloaded FLASH BLANK...so far not working.
Try removing the battery and all other things like the Sim and sdcard then plug it in while holding the same button combination you used to get into emergency mode then tty restoring again.
Sent from my HTC Velocity 4G using Tapatalk 4 Beta
Lg-730 boost mobile.
re:
sorry but thats something I dont know how to do>>> same botton combination,emergency mood
Hello everyone!
I have a vodafone smart 2 (alcatel v860) and i have deleted bootloader with recovery mode and after doing that i restarted the phone.
Now phone wont boot exactly, it only shows a green android logo and thats all it doesn't continue after that.
how to fix this problem
Thanks
a7med2322 said:
Hello everyone!
I have a vodafone smart 2 (alcatel v860) and i have deleted bootloader with recovery mode and after doing that i restarted the phone.
Now phone wont boot exactly, it only shows a green android logo and thats all it doesn't continue after that.
how to fix this problem
Thanks
Click to expand...
Click to collapse
Thats not the bootloader you deleted.
Just boot into recoveyr and flash a rom.
Luigi2012SM64DS said:
Thats not the bootloader you deleted.
Just boot into recoveyr and flash a rom.
Click to expand...
Click to collapse
thanks but iam sure the bootloader has deleted
because i can't boot to recovery mode "power + volume up"
just white screen and the green android logo
help please
You can read this article : http://forum.xda-developers.com/showthread.php?t=2243120 . It's a complete guide for your phone!!
i don't see my problem :S
can anyone share bootloader folder ?
My Vodafone Smart II still does not work
power + volume up or down not work
ADB device not work too
any help please
up
if u hd deletd the bootloader... the phone wouldnt even strt...
omega101 said:
if u hd deletd the bootloader... the phone wouldnt even strt...
Click to expand...
Click to collapse
Yes, this is what happened
what i should do now
It could be some screwed up partitions but like the poster above me told you if you indeed did delete your bootloader the only way to fix it is with a riff box. I reccommend that you try reflashing the recovery the way you flashed it before and then try booting into recovery if you have any more problems pm me.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
WildfireDEV said:
It could be some screwed up partitions but like the poster above me told you if you indeed did delete your bootloader the only way to fix it is with a riff box. I reccommend that you try reflashing the recovery the way you flashed it before and then try booting into recovery if you have any more problems pm me.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
Click to expand...
Click to collapse
i trying to reflash but i have problem in "enable usb debugging "
how i can enable usb debugging and i cant go to Setting ?
You can't use usb debugging when your phone doesn't power on. But it seems like you haven't deleted the bootloader partition but most likely wiped your system partition. Can you enter your recovery?
Sent from my HTC Velocity 4G using Tapatalk 4 beta
there's a stuff called usb jig by connecting which the phone automatically enters into dwnload mode to flash a fresh fw... bt its only for samsung i guess....
search fr a similar method lyk dat.... only way to recover ur brickd phone......
Sent from my GT-I9070 using xda premium
omega101 said:
there's a stuff called usb jig by connecting which the phone automatically enters into dwnload mode to flash a fresh fw... bt its only for samsung i guess....
search fr a similar method lyk dat.... only way to recover ur brickd phone......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Like you said the USB Jig and download mode are for Samsung phone. Let me search around for a program like Odin for your phone and come back to you.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
---------- Post added at 08:47 AM ---------- Previous post was at 08:36 AM ----------
http://forum.xda-developers.com/showthread.php?t=1722811
Try reading this or your last resort could be taking it back to Vodafone if you have warranty and say that it stopped turning on one day and act dumb. Don't tell them that you rooted and played around with it and you might get a replacement.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
WildfireDEV said:
Like you said the USB Jig and download mode are for Samsung phone. Let me search around for a program like Odin for your phone and come back to you.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
---------- Post added at 08:47 AM ---------- Previous post was at 08:36 AM ----------
http://forum.xda-developers.com/showthread.php?t=1722811
Try reading this or your last resort could be taking it back to Vodafone if you have warranty and say that it stopped turning on one day and act dumb. Don't tell them that you rooted and played around with it and you might get a replacement.
Sent from my HTC Velocity 4G using Tapatalk 4 beta
Click to expand...
Click to collapse
the link u provided seems to be legit nd might work to recover the phone... hope the user cud repair hiz phone...
Sent from my GT-I9070 using xda premium
Bootloader Recover
a7med2322 said:
Hello everyone!
I have a vodafone smart 2 (alcatel v860) and i have deleted bootloader with recovery mode and after doing that i restarted the phone.
Now phone wont boot exactly, it only shows a green android logo and thats all it doesn't continue after that.
how to fix this problem
Thanks
Click to expand...
Click to collapse
Hi,
Could you recover bootloader? I am also having same issue. I tried to unlock v860 mobile and when I rebooted after installing ROM my device is not booting at all.
So, have you checked devicemanager in Windows when you connect your phone with usb? Is there an unidentified driver?
Sent from my S500 using xda app-developers app
I have the same problem. I deleted bootloader from recovery. And yes on device manager it shows for about 5 sec as an unknown device. Tested win xp and win 7
Well after so many times am posting mostly just to bump this thread and seeing if anyone found a solution for this.
I still have my Smart II V860 after 1 year not working and kinda tried anything to repair it.
Was trying to put a new custum Rom to it that time and must have done something wrong at it and when did a reboot
phone got stuck on the android logo. Since then nothing worked to bring it back.
PC doesnt recognize it. If you go to device manager sometimes shows it as a modem for a few sec and just that.
Cant flash anything new couse ADB and Fastboot commands dont work couse Pc doesnt recognize the Device when conneced even why
have the right installation files for V860 while ADB is working fine with other phone i use.
I also did a home made USB Jig for it but prolly works only on Samsung devices becouse when i used it V860 just restarts
and still on Android logo and yet not recognized on fastboot or ADB.
Vodafone in here doesnt accept it for repair couse 1 year garanty contract has passed and some private mobile service companies i have tried
have not found a solution.
Looks mostly a hardbrick then softbrick to me but really dont know if anything else left to do about it.