Hi,
Am looking for a good rom (jellybean pref) for ICOO D70 PRO 7'' Tablet PC Dual Core Rockchip RK3066 8GB 1.6GHz Android 4.0
It's a Chinese tablet.. what do you recommend?
Thanks,
Pizu
need more info. What is your ROM now? I just got my D70proII 2 days ago, it is running 4.1.1 ROM 20121220. Did you check the official icoo site, http://soft.aoicoo.com/soft/list.asp?classid=1?
bun
icoo d70 pro 2 getting stuck in bootscreen
I am a noob in this forum.Looking for helpful answers but am yet to find one
I got coo d70 pro2 tablet . The problem is that the tablet won't move past the boot screen (It is stuck there).
I tried to flash rom using LiveSuit but it didn't work out (it says image file invalid)
Any suggestions ?
You download the upgrade package from the official website, inside there is upgrade instructions, choose English to change to english, They recommend to use RKBatchtool to flash upgrade, I am NOT familiar with using livesuite for rk3066 chips. Maybe some othre guru can jump in.
Hope this helps,
bun
bunanson said:
You download the upgrade package from the official website, inside there is upgrade instructions, choose English to change to english, They recommend to use RKBatchtool to flash upgrade, I am NOT familiar with using livesuite for rk3066 chips. Maybe some othre guru can jump in.
Hope this helps,
bun
Click to expand...
Click to collapse
Finally got the tab working.The tablet was entering into recovery mode but to flash it you need it to get into flash mode (Press Volume+ nad power button for sometime and your screen will go blank.However RKBatchtool will show a green dot on "Connected Devices"). Then just the image file downloaded from official site and you are good to go.Also check drivers (you need to install them while in recovery mode)
arnab_sarkar_1988 said:
Finally got the tab working.The tablet was entering into recovery mode but to flash it you need it to get into flash mode (Press Volume+ nad power button for sometime and your screen will go blank.However RKBatchtool will show a green dot on "Connected Devices"). Then just the image file downloaded from official site and you are good to go.Also check drivers (you need to install them while in recovery mode)
Click to expand...
Click to collapse
Glad to see u got it fixed. enjoy,
bun
I've got ICOO D70PRO II and after a couple of minutes using it the screen went full white and wont come normal... The system is working as when i press on screen I am recieveing feedback but the only problem is I cant see the image.. Any help? Already tried reflasning and checking flat cables but none helped..:crying:
Related
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Hello,
I have the same model, and been looking for root.
Thanks.
MS!
prestigio 8.0 hd root (JB 4.2.1)
copy this file to sd card go to recovery and install
New firmware
New firmware available for our tablet:
PMP5588C_20140102_v1.0.42:
http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5588C/PMP5588C_20140102_v1.0.42.zip
1. New preinstalled applications
2. User agent profile for Android browser updated
3. APN/SPN files updated
4. Skype issue fixed
5. Video player issue fixed
6. Chrome browser bugs fixed
7. Sound Recorder issue fixed
8. Wi-Fi bugs fixed
9. Gallery issue fixed
10. System stability and speed improved
11. Other minor issues fixed
verification
Hello friends, i have problem with verification of modified or created own firmware on my PMP5588c duo, during instaling of this update from recovery, boot loader delet this instalation and displayes " validating error" Is possible break this validation? modified or choose other bootloader? sorry for multiple question. thanks for help David
Prestigio 5588c Rooting Issue
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Root for PMP5588c_Duo
AzahTabor said:
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Click to expand...
Click to collapse
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Zapryanov said:
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Click to expand...
Click to collapse
hey Z.
thank you for the guidance.. testing it now so will update shortly.. although the program thought I had a samsung note lol
ok, this is an update.. seems the program did not want to root my tablet. when I started it again, it classed it as a google device, but said connection failed due to cable instability.. guess I will have to try another way
double update... after leaving it for a few days, it seems to have wanted to work.. woohoo. thanks Z for the info
help with prestigio multipad 8.0 HD !!!
Welcome. I have a problem with this tablet.
Tablet died after a crash. There is no option to enter a Power + vol +
also does not move with the micro SD card from the system manufacturer Charges start-up screen and that's it. When connected to a PC saw it as m3-chip.
In total, I found drivers in Device Manager I did update the driver for the M3-chip and now the tablet is listed in my device manager as libusb- win 32 device. I found a program that detects such a connected tablet. The program is Amlogic Image Burning Tool v.1.6.2.2. For the time being this my progress stopped. I was trying to upload with this software firmware downloaded from the manufacturer's website dedicated for this device, but I get the message "find no upgrade" and do not know what to do. Can someone help me ??? I'm not an expert, and the above step I got reading the various forums. To my eye it looks as if they fell bootloader, but thanks to the above program to see the tablet (or rather its processor) and now combines where to download a bootloader to throw it out there and then be able to upload the system such as the sd card. Or is there some other program or a way to restore the dead to life my tablet ??? Can you help ???
1. Turn off the tablet (hold the power button and count to 12
2. Insert prepared SD card https://yadi.sk/d/_6VITNSbhKPyi
3. Press and hold the "Vol +", press "Power ON" for 2 sec.
4. Release all buttons and wait for boot TWRP (about 10 seconds)
5. In TWRP select Install -> update.zip
6. Reboot tablet
testatura said:
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Click to expand...
Click to collapse
Sorry Dude but it doesnt work ..... while updating abort... i tryed with all known firmware from the company ... kingoRoot KingRoot and also OneKlickRoot doesn´t work too. I´m Sad about that...
regards Michael
I have a Trio Stealth Pro 9.7" Tablet by Mach Speed that came with ICS. It wasn't able to run much of anything so I tried to upgrade and needless to say it didn't work.
First, I installed CWM. I did this because the device appeared to have no recovery mode I could find. That seemed to work at first but then I discovered I could ONLY boot into CWM.
SO, I tried to use Live Suit to flash an img of 4.1.1 (I know, a stock file from the manufacturer would have been best but please don't tell me to download one unless you have a working link - I've tried without success).
When that failed, I figured I'd try something else except now I only get a blank screen - not even an initial logo. The only way I can tell if the thing is on or off is by plugging it into my computer, pressing the power button and listening for a usb connect or disconnect noise. (My computer currently recognizes it as USB Device(VID_1f3a_PID_efe8) although it originally recognized it as a Trio something or other).
Any help would be fantastic. Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=2296921
Please read carefully. You must check first whether you have 9.7 or 9.7C before flashing!!!!
Check this if your tab has the Allwinner a10 chip. This worked great for my A10.
http://forum.xda-developers.com/showthread.php?t=1821398
More Questions
Neptune23 said:
http://forum.xda-developers.com/showthread.php?t=2296921
Please read carefully. You must check first whether you have 9.7 or 9.7C before flashing!!!!
Check this if your tab has the Allwinner a10 chip. This worked great for my A10.
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
I appreciate the reply but I don't know how to flash a zip without the use of my tablet screen. I can use Live Suit but that only seems to flash .img files.
Also, I'm not sure how to tell if I have the 9.7 or 9.7c
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
can you fastboot on the RCA tablets?
no i dont think so
How did you brick it?
What happens if you:
1. Hold the power button for 5 seconds to hard power it off
2. Hold the volume down button
3. While still holding the volume down button, press and hold the power button.
4. Hold both buttons for 5 seconds.
i did that and the screen just flickers.... trust me ive tried it all...
please help guys im new to rooting tablets but give me linux and im your man....
ajmp2236 said:
please help guys im new to rooting tablets but give me linux and im your man....
Click to expand...
Click to collapse
@ajmp2236 @chrisdaun ASKED YOU A question please tell use what you did to "mess up"/ brick your tablet and maybe we can help you fix it,
I am sorry to hear about your tablet.
okay well i didnt know how to root at first and i didnt want to use a computer so i downloaded this rom and flashed via recovery menu and it was going fine but there was no root so i was confused so i ended up rooting it using a computer using kingo because its a generic tablet and well i did that and it went well for a few days until i got droidsniff and that ****ed it up because it was running and then the battery died.... please help:crying:
@ajmp2236 I am and IT guy I have used droid sniff for about 6 months or so and never had a problem That app did not brick or ruin your phone.
I also have the same rca dual core rct6378w2 tablet and there is not custom rom or recovery for it yet only stock,. what rom did you try and flash and where did you get the file from, also so can not flash roms or files until we get a custom recover built, only factory sign updates will flash in
stock recovery.
If the droidsniff app killed the battery go charge it for a while and it should work again. please let me know if any of this helps or works.
I'm thinking you are going to have to get a USB jig to force it to go to download mode
Sent from my YP-G1 using xda app-developers app
Info on RCA Tablet
here is information I found useful for the RCA Tablet RCT6378W2
Model Number
RK3168
Semiconductor technology
28 nm HKMG
CPU Instruction Set
Up to 1.2 GHz Dual-core ARM Cortex-A9
CPU
ARMv7-A
GPU
PowerVR SGX 540 (400 MHz)
Memory Technology
LPDDR2, DDR3, DDR3L support
Availability
2013
Utilizing Devices
RCA RCT6378W2,
Anyone have the official Rom
does anyone have the official rom for the RCA RCT6378W2 7" dual core tablet or a back up of there rom if so can you e.mail me a copy [email protected]
darkstorm1720 said:
does anyone have the official rom for the RCA RCT6378W2 7" dual core tablet or a back up of there rom if so can you e.mail me a copy [email protected]
Click to expand...
Click to collapse
did u get official rom?? my tablet also bricked..
I got it
ajmp2236 said:
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
Click to expand...
Click to collapse
I have rom give me your email and I'll give you link
Might help
Try this it might help might be modded
mediafire .com/?itrkcc8k7emimeu
Thats my backup rom, i posted them in androidforums for downloads, there is now a rca tablet section, i also updated the files in img format also comes with the parameter for someone to mod, also the updated files are from my rooted rca, but the original files are stock.
Heres the link.
http://androidforums.com/rca-rct637...-in-img-format-use-w-phoenix-card-3-06-a.html
---------- Post added at 12:50 PM ---------- Previous post was at 12:44 PM ----------
Nice to get credit, i go by androidcustom18 give me thanks.
email for rom
Alex2young said:
I have rom give me your email and I'll give you link
Click to expand...
Click to collapse
my email [email protected]
ajmp2236 said:
Please help i accidentally bricked my RCA rct6378w2 7-inch tablet to the point where it wont boot up or boot to recovery... it just flickers once when i press a button for longer then 3 seconds and i also cannot connect it via usb as i am unable to boot it to recovery.... please help me ... my father got this for me for Christmas and i don't want to let him down. thank you in advance:crying:
Click to expand...
Click to collapse
i fully bricked mine as well. mind you i have rooted a few android phones in the short time but i found some update for the rock chip series rca 7" tablet. long story short i had to install this random update on sd card and go into recovery to install it. now i will point out i rooted my tab with kingoo root and it worked but only on windows, i run a linux mint 17.1 os so you can imagine my frustration when doing things easy with windows, but however i re installed a base os for it to boot back into the rca software. and yes it is still rooted so here is the update ish thingy i found which should work for most rca 7" rct blah blah blah...............now DO NOT UNZIP ****, JUST PLACE INTO YOUR SD CARD AND DO THE INSTALL AS YOU WOULD CUSTOM SOFTWARE. NOT SURE IF IT WILL SHOW UP AS A DOWNLOAD IN THIS THREAD BUT YOU CAN EMAIL ME AND I WILL GLADLY SEND ANYONE WHO HARD BRICKED THEIR TAB THE FILE. HARD BRICK MEANING IT'S ON BUT SCREEN IS BLACK WITH A GLOW
solution for bricked rca rct6 blkah blah the cheap fukars
kishangupta.dhl said:
did u get official rom?? my tablet also bricked..
Click to expand...
Click to collapse
..............install this zip as you would any zip on sd card for update and reboot recovery and waa laaa should have a working rca tablet. not sure who made it but maybe the dev's can make a custom rom using this file. and thanks go's to the one who made it although i can't remember the site i went to or link but here it is.............it is probably the closest thing to an actual firmware update meaning stock version of the rom rather then finding it online after like say 15 hours looking
rca 7" tablet bricked and can't find firmware download?
this is my first on xda site so here go's......i assume most know by now if you landed here, there is little about the rca tablet. custom roms and stuff like that. so i will just say a semi short explanation on my rca trials and errors.....
first i rooted it with a computer running windows 7 or 8, using kingoo root. not the apk but the .exe, which you can download from their site just google kingoo root and should come up as first one.
now onto the brick portion of the rca, if you see only the rca logo and it don't do anything then it's a soft boot, easily fixable just reboot into recovery cause for some reason it takes two reset or restart to go into the actual tablet with programs n stuff.....
now if it turns on and shows the rca logo then go's black and you can seee it's on but after waiting for 5 minutes or even 2 and it hasn't turned on then it is hard bricked (meaning nothing loads or works and your holding your penis in your hand......
to fix this issue for the rca 7" black friday cheap ass tablet, rct625w you know which i mean, just install the zip file onto your extern sd card as you would the official update for any droid tab, i should also point out just put it in the general area of your card like putting a file in the c: drive of ur comp like an image or doc....
now what your going to do is reboot into recovery and select install update from sd, once in there you should see the file i posted below show up as a zip, click it and wait for verification and install then reboot and if brought back to recovery just reset again and voila it should give you a rca 7" tablet working with all the bells and whistles that usually come with this **** ass black friday sale for 39 and change!
p.s. my wife payed 95 for it before we knew they were only 50 bucks in walmart canada
i have bricked this tablet 6 times trying new ways to install a cmpletely diff os like a samsung or an archos or whatever isn't an rca **** box.....
Hi all,
Hoping someone might have some knowledge on this Chinese cheap build tablet.
Its an iRulu eXpro X1, model X10. Inside is the Allwinner A83T with 16Gb Rom and 1 Gb RAM.
This was previously with my daughter but we just upgraded her to a Sumsung Tab A, so I thought I'd play with the iRulu (bad mistake lol).
The iRulu was still running kitkat so I rooted it (Kingo Root works fine in anyone else is trying), attempted to install CWM and TWRP. Both failed, every attempt through adb / fastboot gave bootloader: secure mode fail error.
So I them decided to flash the new rom from iRulu's website - using PhoenixUSB.
All was going well, the tablet went into download mode (hold Esc button, plug USB cable in and press power button 10 times in rapid succession.) and the firmware started to download. At 80% PhoneixUSB threw a boot(0) error and stopped.
After this the tablet will not start (nothing on display) nor even show the charging icon on the screen! It does however still enter the download mode so I can try other images. So far I have tried 5 different images (including darkglow10.1_android5.1.img, A83T_N102_N1021L1BC_20151123.img) however all of then error when writing to the bootloader. I have also tried PhoenixCard to write an image in Startup mode - this gave nothing Live Suite makes no difference either, using the images I have.
Unfortunately the serial number has worn off the device so I cant be sure of the exact firmware from iRulu website to install. (I've mailed them for what its worth).
I have opened the device and the pcb is marked INET-N102-REV01 and Zeng-gc2014-12-22. Google has some stuff on it but nothing I understood
Does anyone have any thoughts? I'm concerned that the bootloader is locked / corrupt in some fashion which is stopping the download.
thanks
update: using the x1081 firmware from iRulu and PhoneixCard I have restore functionality. The device thinks its an expro x2 plus and it doesnt recognise the SD card slot (tried multiple cards) but other than that it seems okay
Will try to figure the correct firmware thou - anyone?
thanks
Having the same issue
Hello, I am having the same problems with that tablet, got it from this girl I'm seeing. It was freezing whenever it connected to the internet, I assume was a ROM issue, i flashed an incorrect recovery on it after getting frustrated. Can you please help?
Hi everyone!
I've one old Asus Transform TF103C aka K010.
I find out that it's possible to update to Android 5 (and I need it for some app).
Right now, my firmware it's WW2.2.33.143 but on the Asus support page, there is the WW2.2.33.144 update that it's mandatory before trying to install the update to Lollipop.
OTA doesn't find anything and either manual download works. The manuals say that after copying the file the system will recognize the update and ask me about...obviously, this doesn't happen.
Someone know an "how to" about?
Problem solved!
How did you solve it?
How did you do it? I have a perfectly good TF103c that is useless because the version of Android is too old. It probably has enough ompff in the hardware to run the latest android if it was available.
if you have TF103C you can install Windows or Linux on it i still searching for drivers ( for wifi sound and charging solution ) ..
For now if you install Windows or Linux on it and your battery die you will need manualy charge battery ..
FullMetalGlicoz said:
Problem solved!
Click to expand...
Click to collapse
how did you solve it?
Hello,
I have an old Asus Tablet of the transformer style (docked to a keyboard) model TF103C or K010. It came along with Android 4.4.2 installed. I rooted the device sometime ago, and can verify that is rooted by using the app “Root Check”.
It is still a nice tablet, but with such an old version of android it tends to be limited and with less features, hotfixes, etc. Long story short, I was trying to install a new rom in a little bit of a hurry, used adb to boot into recovery mode (adb reboot bootloader), and used some images and scripts that I downloaded for a similar device (not exactly mine)…Then I went ahead and used scripts – which mostly used fastboot.exe adb.exe. The problem now is that nothing has changed as far as I can see, and I am no longer able to boot in the quick boot mode (using “adb reboot bootloader”): whenever I try to reboot the K010 connected to my computer in quick boot mode it simply restarts, goes to the splash screen (“Asus in search of the incredible powered by android”) with the caveat that there is a red blinking red stripe at the bottom of the splash screen, and then it simply turns the K010 off (battery charging screen)
Is there any hope to enter into the quick boot mode and fix that mess? Thanks for any insights.