[Q] SG2 will not get past boot screen after first root attempt. - Galaxy S II Q&A, Help & Troubleshooting

Hi,
Yes I'm noob, yes tried searching and saw a similar thread though the phone model is different.
I tried to root Galaxy S2 i9100 in Gingerbread (2.3.6 I believe) from Bell Canada for my cousin using the method from (oh I hope this forum is okay with outside links) galaxys2root.com
Launched ODIN 1.85 and clicked PDA with file "CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar"
Saw the COM box highlighted in yellow before doing anything.
Clicked start and everything was ok saying everything was successful.
So the phone rebooted showing me a the logo screen and a yellow triangle only to give me a blank screen afterwards.
I can still go into Download mode try rooting again, I already have 4 attempts logged into the phone.
Is the phone just soft-bricked or is it un-salvageable? It already has a big crack running though the home button so I'd guess so
All helpful posts are appreciated!

You've used the wrong kernel. You've used an ICS kernel on GB.
Find the correct kernel here.
You should have made sure you had the right kernel to start with. Just knowing it's 2.3.6 isn't enough (and tbh you don't seem too sure about that). You can't just flash any kernel to any firmware. You might need to flash a new firmware just to be sure which one you have now.
If you flash an ICS firmware you can clear the triangle and the custom binary counter with triangle away.

Yeah I was actually looking around for the triangle issue and DL'ed Traingle Away from another thread in the forum.
How am I to find my kernel version if the phone won't get past the logo screen?
Thanks again for the response.

go into dl mode and flash a gb kernel to go with your gb rom.

postfatal said:
go into dl mode and flash a gb kernel to go with your gb rom.
Click to expand...
Click to collapse
Ok looking at Chainfire's 8th post I see kernels for GB. Would it matter to which one I choose?

Well that was easy, I used CF-Root-SGS2_XW_INU_KL1-v5.0-CWM5.zip in Odin and everything is back in order.
Thanks guys, I appreciate it alot. Then again this has to be a noob mistake :0

Related

[Q] Kernel Panic Help

Hi all, I have been reading for an hour or so, searching here and google but I am a bit stuck.
Basically I was trying to install one of the 4.03 roms and I hit kernel panic, no problem I thought, I would just flash back to stock and go from there!.
The situation I am in now is that I only have access to download mode, which is recognised by odin, but it doesn't matter what I flash, I get the gs2 boot screen (no triangle) and then a black screen.
Download mode shows that my binary is samsung official, but I just cant get any room to boot passed the initial boot screen.
Anyone have any ideas what I can do? My phone is a UK unbranded i9100, on t-mobile network.
Originally I tried flashing the 4.03 rom through recovery, I can no longer access recovery.
Did you try to flash stock rom or cf root kernel? I saw here one guy from germany had same problem and he solved. If you have a look on Siyah kernel thread, he posted there a posts about this 2 days ago, you can check, you'll find it. Good luck
Thanks! Reinstalled CF-root and then another rom, all good!

Problem with Voda Aus ICS 4.0.3 ROOT

Hi, I looked around but can't find a thread similar enough to mine to be helpful.
I have a Galaxy S2 i9100T with Vodafone Australia running 4.0.3 ICS
Earlier, I did a lot of research and absorbed a lot of knowledge, and attempted my first root.
Off to a bad start, as it is not working, and my phone will not boot.
My aim was to root, and root only. Not flash any custom firmware etc.
My kernal version was i9100TDULPB, so I downloaded a modded kernal version, which was CF-Root-SGS2_XX_OXX_LPB-v5.2-CWM5
from Chainfire's thread > http://forum.xda-developers.com/showthread.php?t=1103399
and Flashed it on the phone using Odin, the process went well and Odin gave me a 'success'.
However, the phone started up and showed the typical Samsung Galaxy SII boot page, with the yellow triangle down bottom, but then just turned off. I tried booting again, same thing. Vice verca, I could not get the phone to boot past that page.
I can get into Download mode and CWM recovery, I tried booting from CWM recovery to no luck.
So I downloaded another similar kernal from Chainfire, this time it was called > CF-Root-SGS2_XX_OXX_LPB-v5.2-CWM5-PROPER
Which still gave me the same problem. And that is the kernal which is currently on the phone.
And that brings you up to scratch, I'm unsure of what to do now and don't want to risk screwing up my phone any further.
Please explain (Noob friendly ) On what I can do to fix this, I am still interested in having the phone rooted, is there a different kernal you can reccomend I flash? Or a quick fix from CWM recovery? I am new to this, and any advice is helpful.
Thankyou in advance
I think Cf-root is intended only for i9100, not i9100T.
Anyway, try this.
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my Galaxy S2 GT i9100
If you want just root then flash back your stock ROM and use method 1 from guide in my signature.

[Q] Help request, S2 stuck on boot logo

Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.

[Q] tried to root i777, now stuck at galaxy s2 with triangle and i900 screen

Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.

[Q] China i9100 tried to root, stuck starting, kernel prob?

Not my first time to root and install a custom rom on other phone, but this phone isn't treating me well.
So I followed the root guides to root the phone.
Downloaded an insecure kernel for i9100. Although, oddly enough, I bought this phone 2nd hand, and when I went to the "about" part for the kernel look up before tried to root it, the kernel info just contained ICS3.?? (forgot) and the date. There was no four or five letter kernel code like I've been seeing. But according to cnet (one of many rooting tutorials), the kernel version doesn't matter as you can change the kernel anytime, or after rooting in this case.
So I installed Kies to get the Samsung drivers installed. Done.
Restarted phone to download mode (volume down, home, power)
Started Odin 3 v1.83
Phone was recognized. Click the 2 boxes (Auto reboot and F. Rest Time).
Clicked PDA, loaded up an insecure kernel.
Status went through OK, ended up with "Pass!"
Phone automatically restarted.
Now the problem. It restarts, shows the Samsung Galaxy S2 logo with the big triangle underneath it, and thats it. Never leaves this screen. I thought maybe it's a kernel problem, so I tried several different insecure kernels, all with no change. I have no idea how to find what kernel was the original one that came with this phone. Would using Odin with the original secure kernel (or even insecure) solve this problem? Otherwise, what else can I do? My note 2 was stolen so I bought this s2 second hand until I can scrape up enough money for a note 2 again, but the damn thing won't even boot up now. :crying:
How can I get this working again, even to have it stock again I'd be fine (though obviously putting on a custom room with root would be best).
Well you dont seem to mention what you have tried after flashing your kernel?
Have you tried going into download or recovery mode, do they work? If so simply flash another kernel or rom.
Also, I my be wrong but there isnt a China i9100 afaik so you may have flashed incorrect kernel so system isnt booting.
Remove battery and tell/show us what label says.
TheATHEiST said:
Well you dont seem to mention what you have tried after flashing your kernel?
Have you tried going into download or recovery mode, do they work? If so simply flash another kernel or rom.
Also, I my be wrong but there isnt a China i9100 afaik so you may have flashed incorrect kernel so system isnt booting.
Remove battery and tell/show us what label says.
Click to expand...
Click to collapse
There wasn't much to try, at least as far as my noob self knows about. I tried flashing 6 other kernels I found, merely taking guesses at which might possibly be the Chinese s2 one, I remember from flashing other phones that i had to look for Z or D in the kernel ID. But all of them just led to the same problem of not booting past the logo screen.
Besides just trying to start it up as normal (which doesn't work) and starting it up in download (by holding down vol+home+power), what others ways can I start it up? I don't know how to boot into recovery, and I didn't know I can flash a rom without first rooting it, which I haven't done yet because it's still stuck in start-up.
Searching enough xda threads and just googling seems show a pretty large consensus supporting the existance of a China i9100, plus I see them everywhere (as well as s3, s4, and notes), so I'm 99% sure they are an official and semi-large market for them here (after iPhones unfortunately). But even still, that doesn't help me locate the original kernel.
Under the battery, is says this:
Samsung WCDMA
Model #: GT-I9100
CMIIT ID: 2011CP2751
Do these help? So is any of the steps I did wrong, or can you otherwise point me in the right direction? Appreciate the help.
Don't post your IMEI (or your SN for that matter).
MistahBungle said:
Don't post your IMEI (or your SN for that matter).
Click to expand...
Click to collapse
Thanks for the tip MistahBungle. Edited out.
Hate to say it, but found more help on youtube... Found a guide that walked me through replacing all the files (not just kernel) in Odin that got it back up and running. I'll follow the xda guides again and hopefully it'll work this time... Thanks anyways...

Categories

Resources