DO NOT USE THE ZIP ON 4.1.2 based ROMS. For 4.1.2 roms: Copy wallet R96 into /system/app and set permissions appropriately. Files from the new Sprint leak appear to fix the "reader not detected" problem (since wallet will be officially supported on the sprint variant) and I will upload a new zip shortly. (Unless someone has time to do it sooner)
For 4.1.1 roms:
Thanks to Its Twix for the write up & ogdobber for the technical support and making the zip
A Complete and Utter Idiot's Guide to Getting Google Wallet Working on the Verizon Note II, Running Touchwiz ROMs:
1) Create a Nandroid backup in Recovery.
2) Flash NoteII-lib_nfc-fix-r87.zip from custom recovery and wipe Cache.
2) Run Google Wallet and see if it works. If you haven't setup Google Wallet before, it will most likely crash at "Setting up Google Wallet. This may take 5 minutes." *If you have already setup Google Wallet and get a crash error after switching ROMs, look for the other guide at the bottom*
3) If it crashes, use Root Explorer (I refer to Root Explorer because that's what I use but you can use any file explorer that can change permissions and mount system) to Mount system R/W and remove the Wallet apk from system/app
4) Edit build.prop (in the system folder) to be a Galaxy Nexus (CHANGES MADE BELOW).
ro.product.model=Galaxy Nexus
ro.product.name=yakju
product.device=maguro
5) Save and Exit then long press build.prop and make sure permissions are Owner: R/W Group: R Others: R
6) Reboot
7) Download Google Wallet from the Play Store
8) Set up Google Wallet and register a card. Once it finishes registering the card the app will reset.
9) When it resets and asks which account you would like to use for Wallet, close the app.
10) DELETE (not uninstall) the Wallet apk from data/app
11) Navigate to where you saved the modified Wallet zip and extract the files.
12) When the extraction completes, go to the extracted files location.
13) Copy the com.google.android.apps.walletnfcrel.modaco.1.5-r87-v15.apk file and paste it in /system/app (make sure you have system mounted R/W).
14) Long press on the wallet apk file you copied and set permissions to Owner: R/W Group: R Others: R
15) Reboot
16) Run Wallet and go through the setup. It should work now instead of crashing.
17) Reboot
18) Run Wallet. If it still works after the reboot, change your build.prop back to where it was originally (CHANGES BELOW).
ro.product.model=SCH-I605
ro.product.name=t0ltevzw
product.device= t0ltevzw
19) Make sure the build.prop permissions are still Owner: R/W Group: R Others: R
20) Make another Nandroid backup.
21) Go try it out!
NOTE: Google Wallet is not usable everywhere that Bling/PayPass is! Just because it doesn't work at one place does not mean it won't work at another!
Merchants where it is (most likely) guaranteed to work can be found here: http://www.google.com/wallet/how-it-works/in-store.html. Some other places that are not listed there may still work (e.g. McDonald's). Sadly. some places you will go do not even have their Bling/PayPass system on or working so make sure it's actually working before you come back here saying your transaction didn't work.
Hope this helps. Sorry it's so thorough, I just wanted to help out some of those that might not be so used to this sort of thing.
If you are changing to a new ROM and having issues:
1) Flash the modaco r87 zip in the OP and try to run it.
2) Try to add an account. It will probably crash at Adding Account.
3) Change build.prop to be a Galaxy Nexus and fix permissions (follow step 4 of the first guide).
4) Reboot
5) Run Wallet and it should be working again. If it works, change your build.prop back to what it was originally and fix permissions (follow step 18 of the first guide).
6) Go try it out!
If you get an error about Insufficient secure element permissions, reflash the Modaco apk and reboot.
On Beans build4 there is an issue with adding cards. Keep trying and close the app occasionally when trying and it should add the card successfully.
WarlockLord said:
Picked up my note 2 last night. Got google wallet working, activated, and my cards added. But, when I hold the phone to a paypass reader, the wallet app activates and tells me to check with the cashier to see if the transaction went through (but it didn't).
Thoughts?
Nfc.apk and NfcTest.apk or something else?
Click to expand...
Click to collapse
Word on the street is Verizon disabled it, pending their own app for the same purpose to make more money
Your farther then I got. Ha. Downloaded it and it said not compatible with this device. Hope you can figure it out soon.
Yes, but Verizon only disabled access to it from the market and left out some libs. I'm past that part already, just gotta figure out how to trigger the transaction now.
I will definitely be following this thread. Good work getting this far!
Thanks, I was actually responsible for getting wallet working on the GS3 and then some scumbag make a video and took credit for it. Very upsetting. This time I'll make the video myself and give it to the tech sites lol
Ganster. Did you copy all the libs over or add anything to framework?
Sent from my SCH-I605 using xda app-developers app
Deckoz2302 said:
Ganster. Did you copy all the libs over or add anything to framework?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Nothing to framework.... some libs yes. I could only get one specific version of wallet to load the secure element applet, so I used that and then afterwards I upgraded the wallet version to R87.
Made normal changes to build.prop so it thinks its a GNex. Lots of tinkering and playing though, and even if I can get it fully working, it seems the process to get it working on this device will be more complicated than the S3
Is snote still working for you since you changed the build.prop to nexus or no?
Sent from my SCH-I605 using xda app-developers app
Deckoz2302 said:
Is snote still working for you since you changed the build.prop to nexus or no?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I changed it to Nexus just to add the cards. Once the cards were added, I changed it back.
Because this is a modified wallet, it doesn't do the device check on every run. But, in the background, it transmits the value in build.prop to google to get the OK to add the card, and if what is transmitted is not valid, google doesn't allow you to add cards.
Are you sure it doesnt check on card swipe as well? Did you try to swipe with the build.prop as a nexus? Just curious
Sent from my SCH-I605 using xda app-developers app
Yes I did. I didn't change the build.prop back until after I came back to work.
Same thing I always did with the S3 too. Like I said, I think the Nfc.apk passes the data to wallet for the transaction.
Right now I'm trying to find a stock odexed rom for the I9300 (same chip) with android 4.1.1.
I'll have this working by the end of the day
WarlockLord said:
Yes I did. I didn't change the build.prop back until after I came back to work.
Same thing I always did with the S3 too. Like I said, I think the Nfc.apk passes the data to wallet for the transaction.
Right now I'm trying to find a stock odexed rom for the I9300 (same chip) with android 4.1.1.
I'll have this working by the end of the day
Click to expand...
Click to collapse
Thanks for the work man. I am dying without my google wallet, so used to using it on my Nexus that at the store I pulled out my phone and tried-then i realized that wouldnt work. The cashier had to have thought I was nuts. :silly:
http://forum.xda-developers.com/showthread.php?t=1863346
Odin i9300 stock. Not at pc so I cant extract it
Sent from my SCH-I605 using xda app-developers app
Deckoz2302 said:
http://forum.xda-developers.com/showthread.php?t=1863346
Odin i9300 stock. Not at pc so I cant extract it
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
hotfile sucks
That's not a full rom either... just a differential OTA... maybe I'll get lucky and it will have what I need though
Hopefully this gets going. I was playing with it yesterday for sometime but it didn't work
Tap'n
techgov8 said:
Hopefully this gets going. I was playing with it yesterday for sometime but it didn't work
Tap'n
Click to expand...
Click to collapse
How far were you able to get?
I know..but it may have the original odex and nfc.apk ill keep looking
Sent from my SCH-I605 using xda app-developers app
no nfc files in that zip... dammit
WarlockLord said:
Picked up my note 2 last night. Got google wallet working, activated, and my cards added. But, when I hold the phone to a paypass reader, the wallet app activates and tells me to check with the cashier to see if the transaction went through (but it didn't).
Thoughts?
Nfc.apk and NfcTest.apk or something else?
Click to expand...
Click to collapse
Have you tried 1.5 R79 v5?
That is the only version that consistently worked with my VZW Gnex. Other versions installed and let me add cards, however, when it came time for the transaction they would scan but wouldn't go through.
I had the exact same symptoms when not using this version.
Related
I have always kept the Google Search widget on my homescreen. I have a son who is curious about everything, so I'm often searching things, and I used to touch the mic button to play a song from Google music or dictate a text.
I've had a lot of trouble with my Vibrant lately and have finally gotten FishmanMod Blue 2.2 Frankenstein Slim to work for me. However, I have lost the search widget. When I try to add it from my widget list, all I get is an empty box that says and does absolutely nothing.
I went to Google Play and it said that Search isn't compatible with my device. (The photos looked like Google Now...)
I have tried searching the forums, and came across an .apk that I tried. I moved it from my downloads folder using Root Explorer into the /system/apps folder and rebooted.
Still the same result.
Can anyone please point me in the right direction? Thanks for reading!
when you found the widget and moved it in ROOT did you change the permissions then reboot or just moved the file and reboot ?
krazierokz said:
when you found the widget and moved it in ROOT did you change the permissions then reboot or just moved the file and reboot ?
Click to expand...
Click to collapse
I changed the permissions. Basically what I did was looked up the thread where Woodrube said how to install GTalk as a system app. I copied those instructions in order to move this .apk. The permissions I set are:
Owner: Read, Write, Execute
Group: Read
Others: Read
None of the special permissions are ticked.
you dont need execute bro just check read on owner/group/others and check write for owner reboot and check again also you made sure you deleted the other one that was kinda there but not working ??
krazierokz said:
you dont need execute bro just check read on owner/group/others and check write for owner reboot and check again also you made sure you deleted the other one that was kinda there but not working ??
Click to expand...
Click to collapse
Thanks for the reply. For the record, I'm not a bro
Reset the permissions as you suggested. I looked for anything else with "google" and "search" in it and found nothing besides what I knew I had moved there. Rebooted, same results. I only see "search" in my widget list and it is still an empty box.
Okay, looks like I'm just completely missing the Google Search apk. I installed a 3rd party widget from the Play Store, and touching the mic activates the voice search (because I have it installed) but tapping anywhere else on the search box does absolutely nothing.
I need to look for the Google Search app itself. Any ideas on how to get it? I can't find it at all on Play store. I need it for 2.2.
im so sorry mama excuse my stupidity and do you have any other 2.2 roms ? you can open up the rom on your phone or computer and open the system folder and look for the google search apk are you familiar n doing that again my apologies
krazierokz said:
im so sorry mama excuse my stupidity and do you have any other 2.2 roms ? you can open up the rom on your phone or computer and open the system folder and look for the google search apk are you familiar n doing that again my apologies
Click to expand...
Click to collapse
No problem. Please don't apologize. I fully realize and accept that I'm totally in the minority here. No big deal at all. Just struck me as funny.
That's a really good idea. I'll try that. I've got the voice search shortcut on my homescreen, and I can use that. I just dislike change.
Hopefully all this will cease to be an issue when I get my new phone. The Hubs (DigitalMonk) thinks I should wait for the new Nexus to come out on Tmo. I'm not at all sure I don't just want to stick with what I know and go with the SGSIII.
I feel you honestly I love the nexus but I always feel like those phone are never giving enough power etc for they to be top dollar phones and the last 2 had problems with the bootloader and recovery being wiped and volume /power buttons becoming disabled ill stick with what you know samsung phone might be plasticy but there solid IMO but if you was to get the new.phone its like trying to keep up with buying jordan lol stick to something you like not because its new but because its easier for you
Sent from my SGH-T959 using xda app-developers app
Okay first I need to know what Android version you are running. If you are running 2.x, you can only use the old Google SearchBar Widget version 1.x. Do not try installing Google Now to Android 2.x because it is incompatible. You can extract the Google SearchBar Widget from gingerbread "gapps.zip" files: http://goo.im/gapps
If you are running ICS roms and want to use Google Now, there are modded version to make it working.
If you are using Jelly Bean roms, then you should be able to install Google Now from the Market.
If you are installing Google Now to Jelly Bean by manually moving the apk file to /system/app, the app needs a lib file called "libgoogle_recognizer_jni.so". However, the name of this file can change depends on the version you are using. This file is located in the \lib\armeabi-v7a\ folder within the apk file itself, it needs to be extracted and moved to the \system\lib\ folder. If you install the apk using conventional method, it will automatically extract this lib file to the necessary location, so you wouldn't have to worry about all this.
It's not recommended do this manually, but by either flashing the patch, or installing it from the Play Store.
Here is the patch for ICS roms: http://forum.xda-developers.com/showthread.php?t=1835199
The patch for Jelly Bean roms is located at SlimRoms website in the addons section.
Hi Folks,
I created this mod for the Galaxy S4 I9505, However I think this mod would work on AT&T Samsung Galaxy S 4 as it running the same spec phone.
Could an experienced user test this mod and report back if it works, if not if they can upload the nfcnci.apk I will see if I can get the mod working on AT&T.
Before running the program please ensure you have a backup of nfcnci.apk and nfcnci.odex (if the file exists) depnending upon if your rom is odex or deodex just in case the mod does not work.
Now for the Mod
Lockscreen What this does is allows you to use nfc when the screen is on and in a locked status.
Screen Off Allows the use of NFC when the screen is off.
By default NFC only works when the phone screen is on and unlocked. (Suspect always had problem on this one as previously stated)
any feedback appreciated.
Remember to backup before flashing. for that just it case situation.
Enjoy Optimal
p.s. remember people that leaving the NFC on all the time can leave you phone open to security breaches. so please be careful when using this mod.
I can report that screen off mod works. Going to try lockscreen next. Dont know how i feel about NFC being on when screen is off.
DJsCrIBbLe said:
I can report that screen off mod works. Going to try lockscreen next. Dont know how i feel about NFC being on when screen is off.
Click to expand...
Click to collapse
thanks @DJsCrIBbLe for testing. In terms of screen off version it will be a security risk, However a number of users have requested it. I suppose they will just need to ensure they take all relevant security precautions. and protection of there phone
Because NFC can be breached and could cause all sorts of issues and hacks.
anyway thanks for testing its much appreciated.
Optimal
Lock screen works too
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Excellent thanks for testing the mods. Its much appreciated.
Sent from my GT-I9505 using Tapatalk 4 Beta
Do you have the stock NFC version of this mod?
I bricked my GS4 i337's Google Wallet. Everything on my phone works, but I can't get into the Google Wallet App because it requires NFC and the toggle doesn't work anymore. I want to install a new ROM and/or use the current one WITH Google Wallet, but I can access it. Do you have a "revert to stock" version of the NFC mod for the i337?
Can anyone send me a copy of the two original files for the i337 nfcnci.odex and nfcnci.apk and tell me how I revert back?
Please help.
kevinjmoore said:
I bricked my GS4 i337's Google Wallet. Everything on my phone works, but I can't get into the Google Wallet App because it requires NFC and the toggle doesn't work anymore. I want to install a new ROM and/or use the current one WITH Google Wallet, but I can access it. Do you have a "revert to stock" version of the NFC mod for the i337?
Can anyone send me a copy of the two original files for the i337 nfcnci.odex and nfcnci.apk and tell me how I revert back?
Please help.
Click to expand...
Click to collapse
Sent you a PM
Optimal
So neither of these mods worked for me. I'm stock SGH-I337M odex. I still have my regular nfc functionality but it's not working with screen off or at lock screen.
kevinjmoore said:
I bricked my GS4 i337's Google Wallet. Everything on my phone works, but I can't get into the Google Wallet App because it requires NFC and the toggle doesn't work anymore. I want to install a new ROM and/or use the current one WITH Google Wallet, but I can access it. Do you have a "revert to stock" version of the NFC mod for the i337?
Can anyone send me a copy of the two original files for the i337 nfcnci.odex and nfcnci.apk and tell me how I revert back?
Please help.
Click to expand...
Click to collapse
Hi kevinjmoore.
Please install the attached nfc, as per our discussion.I hope this resolves your issue.
Optimal
OptimalKiller said:
Hi kevinjmoore.
Please install the attached nfc, as per our discussion.I hope this resolves your issue.
Optimal
Click to expand...
Click to collapse
Any possible way you could take the Google Wallet modified files, make the edits, and post these? Would be handy for those with the Google Wallet mod.
Aou said:
Any possible way you could take the Google Wallet modified files, make the edits, and post these? Would be handy for those with the Google Wallet mod.
Click to expand...
Click to collapse
Can you explain more about the mod. I might be able to do something. But I need to know more about it.
Optimal
Sent from my GT-I9505
OptimalKiller said:
Can you explain more about the mod. I might be able to do something. But I need to know more about it.
Optimal
Sent from my GT-I9505
Click to expand...
Click to collapse
The mod involves the following things:
Install Xposed Mod
Install Wallet Xposed module (hides root and phone model from Wallet's built-in search) and enable the module
Edit /system/build.prop to fool Wallet into thinking it's a Galaxy Nexus
Stop the system
Replace /system/app/NfcNci.apk
(Remove /system/app/NfcNci.odex)
Replace /system/app/NfcTest.apk
(Remove /system/app/NfcTest.odex)
Replace /system/etc/nfcee_access.xml
Replace /system/lib/libnfc-nci.so
Replace /system/lib/libnfc_nci_jni.so
Replace /system/lib/hw/nfc_nci.MSM8960.so
Clear dalvik cache
Reboot
Setup Google Wallet as you would normally. Get it completely initialized.
Restore build.prop to normal settings
Reboot
The original post includes two different methods of doing this, and I think both involve flashing a zip file from recovery. I don't like flashing zips like that, so I disassembled it and came up with the procedure above. ^_^
Aou said:
The mod involves the following things:
Install Xposed Mod
Install Wallet Xposed module (hides root and phone model from Wallet's built-in search) and enable the module
Edit /system/build.prop to fool Wallet into thinking it's a Galaxy Nexus
Stop the system
Replace /system/app/NfcNci.apk
(Remove /system/app/NfcNci.odex)
Replace /system/app/NfcTest.apk
(Remove /system/app/NfcTest.odex)
Replace /system/etc/nfcee_access.xml
Replace /system/lib/libnfc-nci.so
Replace /system/lib/libnfc_nci_jni.so
Replace /system/lib/hw/nfc_nci.MSM8960.so
Clear dalvik cache
Reboot
Setup Google Wallet as you would normally. Get it completely initialized.
Restore build.prop to normal settings
Reboot
The original post includes two different methods of doing this, and I think both involve flashing a zip file from recovery. I don't like flashing zips like that, so I disassembled it and came up with the procedure above. ^_^
Click to expand...
Click to collapse
Pretty cool will take a look at this weekend to see how is it is to implement.
Optimal
Sent from my GT-I9505
Deleted.
Too bad. I'm getting constant FCs on I9505 with Google Edition port ROM. I tried the lockscreen mod only.
Aleq said:
Too bad. I'm getting constant FCs on I9505 with Google Edition port ROM. I tried the lockscreen mod only.
Click to expand...
Click to collapse
Pm sent to you.
Optimal
Sent from my GT-I9505
Did Lockscreen only and every time I scan a tag I get "unfortunately, nfc payment has stopped" errors. Tags still function though
Ephekt said:
Did Lockscreen only and every time I scan a tag I get "unfortunately, nfc payment has stopped" errors. Tags still function though
Click to expand...
Click to collapse
Hi ephekt
What rom version are you running?
I have 2 threads on the go at the moment.
Optimal
Sent from my GT-I9505
Mint jelly
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Any chance I/we could get a zip to disable this mod. I'd like to try the mood in xposed framework to see if I still get the NFC payment crash.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
There are a few methods and links That have worked for Google Wallet. I would like to post them methods and information. None of this is my work at all. I do not take Credit for any of it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT INFO AND LINKS - PLEASE READ
Note II - I got Working Google Wallet from here - Refer to Crazy Talk OP ----> Click Here
Click to expand...
Click to collapse
Recommended build.prop Editor - Jrummy Build Prop Editor
Click to expand...
Click to collapse
ALWAYS! ALWAYS! ALWAYS! RESET GOOGLE WALLET BEFORE YOU FLASH A NEW ROM OR YOU COULD LOSE IT FOREVER
Click to expand...
Click to collapse
BEWARE - BEFORE YOU BEGIN - 1st Picture provided by fireishott - 2nd Picture by firstflyer
After seeing people struggle and research, this appears to still block Google Wallet from completely setting up and initializing. The regular SIM cards do not do it, but the ISIS or NFC appears to be doing the damage. I am not sure if it is possible to switch to a non NFC SIM, but you are more than likely OUT OF LUCK with this SIM Card...Remember this does not guarantee success, but if you hit a wall and just can't get any luck it is a last ditch effort and probable cause to your issues
Refer to Troubleshooting Step 4 in post #2 to possibly solve the issue
Click to expand...
Click to collapse
LATEST PATCHED GOOGLE WALLET - TouchWiz 4.3 and AOSP - Tap and Pay GW v2.0 R151-v8 - Thanks loserskater - Thread Found Here!
IMPORTANT - BEFORE YOU GET STARTED REMOVE ANY TRACES OF WALLET ALSO ENSURING YOU RESET WALLET FROM THE DEVICE BEFORE YOU REMOVE IT.
_________________________________
1. Download The Following Zips
TouchWiz 4.3 - TouchWiz 4.3 NFC Lib Fix and Patched Wallet
AOSP - Go Here for Patched Wallet - Thanks loserskater
2. Reboot into Recovery
3. Flash Appropriate Zip for your ROM Base (Always Wipe Cache and Dalvick before flashing any zip)
5. Reboot
4. Open Google Wallet and Set up Tap and Pay until 100% Completion with all Cards added ready to purchase
5. Once Google Wallet says Tap and Pay is Ready For Use You are Good
6. Enjoy Working Wallet
Reference these build.props
Galaxy Nexus
ro.product.device=maguro
ro.product.model=Galaxy Nexus
ro.product.name=yakju
Verizon Note II
ro.product.model=SCH-I605
ro.product.name=t0ltevzw
product.device= t0ltevzw
Give Thanks To:
loserskater - for libfix and patched wallet
WarlockLord - Original Wallet Thread
crazy talk
safeplayer22
siraltus
YourCancer01
Dwitherel - For latest patched version of Google Wallet R96v16
gramsey1911 - Verizon NFC Lib Fix
jimmypop13 - For trying on CM 10.1 and reporting what he did to get successful install
tomskag - Testing MoDaCo - Confirmed Success
PaulOBrien - MoDaCo Toolkit and Patched MoDaco Wallet Modules
fireishott - All The feedback with troubleshooting
ihavenewnike - Mentioned Jrummy's build prop editor
silvertag - I wanted to put resetting Wallet Online in the OP already, however, he made mention so I give credit to him
BoostedB18C - Extremely helpful with Troubleshooting in the Thread - Thanks
vt0r - Providing information for AOSP
open1your1eyes0 - Instructions for installing on AOSP
If you were left out its not by intention just PM Me
Troubleshooting
TROUBLESHOOTING
1) Insufficient Secure Element Privileges for system image (release-keys).
If you've been trying to run Google Wallet on your USA variant Note II you've probably ran into some problems. like this one..
"Insufficient secure element privileges for this system image (release-keys)."
why is this happening? check HERE for more detail.
But for the sake of keeping everything together in this thread..
2) Google Wallet controller applet version says "not present"
1. Open Google Wallet
2. Hot Menu Soft Key
3. Find About
It should not say Not Present
If It says "Not Present"
You need to do a nand restore of the ROM you had Google Wallet running on and hit reset Google Wallet. Then You can restore or flash a new ROM and restart the process. If you Do not have a Nand Backup where Google Wallet was working, you may never be able to use Wallet again
3) Device Not Ready. Wallet is unable to proceed until this device is fully initialized. Make sure the device has network access and try rebooting if the problem persists.
I have just gone through the whole set up process trying to use the Galaxy Sprint Note II build.prop and the above error message occurred. I could not even reset Google Wallet on my phone unless I changed my build.prop to the Galaxy Nexus which is the one in this OP. If you are having issues, Only use the Galaxy Nexus build.prop if you are not already doing that
Step 1. Change your build.prop to the settings in Method 1 and 2. (Do not reboot after you finished)
Galaxy Nexus
ro.product.device=maguro
ro.product.model=Galaxy Nexus
ro.product.name=yakju
Step 2. Download Titanium Backup
Step 3. Use Titanium Backup to wipe Google Wallet App Data and Cache or the built in Application Manager
Step 4. Reboot to Recovery
Step 5. Wipe Cache / Dalvick Cache 3x
Step 6. Reboot
Step 7. Set Up Google Wallet until 100% completion with card added
Step 8. Revert to original build.prop
Verizon Note II
ro.product.model=SCH-I605
ro.product.name=t0ltevzw
product.device= t0ltevzw
Step 9. Reboot
Should be Good to Go. I just completed the whole process
FIX: DO NOT USE ANY OTHER BUILD.PROP CONFIGS. ONLY USE WHAT IS IN THIS OP.
4) "Device Setup Failed"
Once your stuck at 'Device setup failed' you need to reset your wallet from the web. Then change your build.prop to Nexus. Reboot, retry wallet and it should register correctly, after that you can change back your build.prop.
1. Go to Google Wallet Online
2. Log in with your login info
3. Click Devices on the left hand side
4. Click Disable Wallet App
5. change your build.prop to the Galaxy Nexus
Galaxy Nexus
ro.product.device=maguro
ro.product.model=Galaxy Nexus
ro.product.name=yakju
6. Reboot Phone and Try to Set up Wallet Again
7. If all Goes Well meaning Wallet is set up 100% and ready for use, you can return to the Stock build.prop
8. Revert to Stock.prop
Verizon Note II
ro.product.model=SCH-I605
ro.product.name=t0ltevzw
product.device= t0ltevzw
9. Reboot Phone after you change back to stock build.prop
10. Enjoy
5) Wallet Freezes During Reset
Wallet Will freeze 9 times out of 10 if you try to perform the reset with your stock build.prop. If this happens then you need to change your build.prop to the Galaxy Nexus
1. Use jrummy build.prop editor or whatever your used to using to change your build.prop
2. Change the build.prop to the Galaxy Nexus
Galaxy Nexus
ro.product.device=maguro
ro.product.model=Galaxy Nexus
ro.product.name=yakju
3. Reboot Phone
4. Reset Google Wallet
5. Once Google Wallet Resets you can flash another ROM or continue whatever Troubleshooting you were doing
6) Tap and Play Is Missing
If You Have Wallet Working Already and upgrade from the Market which you can do without any build.prop modification, Tap and PLay will disappear. Before updating you need to change to the Galaxy Nexus build.prop, reboot the phone then update form the Market and you should have no issues
1. Go into Apllication Manager, Scroll to Google Wallet and Wipe Data and Cache for the App
2. Use jrummy build.prop editor or whatever your used to using to change your build.prop
3. Change the build.prop to the Galaxy Nexus
Galaxy Nexus
ro.product.device=maguro
ro.product.model=Galaxy Nexus
ro.product.name=yakju
4. Reboot Phone
5. Open Wallet and Set up Tap and Play until 100% Complete and you get notification that Tap and Play is ready for use!!
6. Once Step 5 is complete, you can go back to your stock build.prop
AT&T Note II
ro.product.model=SAMSUNG-SGH-I317
ro.product.name=t0lteatt
product.device= t0lteatt
7. Reboot Phone
8. Enjoy Working Wallet
7) NFC Error 11 Fix - "nfcpaymentsetupfailure: 11"
1. Go Here
2. Disable Any devices associated to your Google Account
3. Go into TWRP
4. Nandroid Backup Your current Setup
5. Click Wipe
- Slide to Factory Reset 3x
- Click Advanced Wipe
- Wipe Dalvick Cache, System, Data, Internal Storage, Cache 3x
This will clear any Wallet pieces that could be lingering
4. Install Whatever ROM you like
5. Try to install again
Confirmation Post - "nfcpaymentsetupfailure: 11"
Dude your awesome like for real. I upgraded from 4.1.1 a few weeks ago since I finally got the this version of wallet is no longer supported...and well I kept getting failed blah blah. Tried this and it worked first try.
Deckoz2302 said:
Dude your awesome like for real. I upgraded from 4.1.1 a few weeks ago since I finally got the this version of wallet is no longer supported...and well I kept getting failed blah blah. Tried this and it worked first try.
Click to expand...
Click to collapse
Nice Man, glad it worked especially first try lol.....It took me a while to figure out why only the Galaxy Nexus would wrk for resetting and setting up, tired to use Sprint's but it still didn't work and I dont know why cause it worked for some, but the Galaxy Nexus build.prop has more success overall for everyone
bdorr1105 said:
Nice Man, glad it worked especially first try lol.....It took me a while to figure out why only the Galaxy Nexus would wrk for resetting and setting up, tired to use Sprint's but it still didn't work and I dont know why cause it worked for some, but the Galaxy Nexus build.prop has more success overall for everyone
Click to expand...
Click to collapse
I think it was probably more to do with formatting cache repetitivly to completely wipe old data. However my trusty cvs didnt detect my phone...meh
Deckoz2302 said:
I think it was probably more to do with formatting cache repetitivly to completely wipe old data. However my trusty cvs didnt detect my phone...meh
Click to expand...
Click to collapse
Was that prior to installing this method, or did you not try using the wallet at CVS yet? Thats weird wonder why it didnt pick it up, maybe a fluke
bdorr1105 said:
Was that prior to installing this method, or did you not try using the wallet at CVS yet? Thats weird wonder why it didnt pick it up, maybe a fluke
Click to expand...
Click to collapse
Well before I tried this method I couldn't load my cards. Who knows. Im heading to home depot...ill know if it was a fluke after that lol. Either way cards are loaded. Now I can play with the libs to get it working hopefully
Deckoz2302 said:
Well before I tried this method I couldn't load my cards. Who knows. Im heading to home depot...ill know if it was a fluke after that lol. Either way cards are loaded. Now I can play with the libs to get it working hopefully
Click to expand...
Click to collapse
Yea let me know how that works, and if its the libs pm me them or something and I will add the libs to the OP and throw your name all over that
Thanks for the information, OP! This is the first time I've had google wallet set up ever
Mac of York said:
Thanks for the information, OP! This is the first time I've had google wallet set up ever
Click to expand...
Click to collapse
Appreciate it man enjoy
Sent from my SGH-T889 using xda premium
Thank you for the great instruction. Setup was easy and no issues.
Took it to local mcdonald to try but some how it kept asking me to tap again and again so I eventually used my credit card.
NFC was on too. Any ideas?
Sent from Verizon Note II
saint365 said:
Thank you for the great instruction. Setup was easy and no issues.
Took it to local mcdonald to try but some how it kept asking me to tap again and again so I eventually used my credit card.
NFC was on too. Any ideas?
Sent from Verizon Note II
Click to expand...
Click to collapse
Not sure why it was asking you to keep tapping, try at another McDonald's and see if it gives you the same issue again. Reboot into recovery wipe cache and dalvick just because. Also shut nfc off and back on to. If you get the same problem try reflashing the libs. Anyway let me know if you have any success
Sent from my SGH-T889 using xda premium
saint365 said:
Thank you for the great instruction. Setup was easy and no issues.
Took it to local mcdonald to try but some how it kept asking me to tap again and again so I eventually used my credit card.
NFC was on too. Any ideas?
Sent from Verizon Note II
Click to expand...
Click to collapse
I've noticed if I hold it too close to the reader it will fail. I hold it around an inch above the reader.
Sent from my SCH-I605 using xda app-developers app
You sir are a ****ing life saver! I've been trying to get this to work for over a month since I lost it and this has been the only way it has worked. Awesome. Thanks!
techgov8 said:
You sir are a ****ing life saver! I've been trying to get this to work for over a month since I lost it and this has been the only way it has worked. Awesome. Thanks!
Click to expand...
Click to collapse
Glad to see it worked for you. I love Google Wallet so I know how you feel
Sent from my SGH-T889 using xda premium
Getting device setup failed.
Sent from my Galaxy Nexus using xda app-developers app
Followed the instructions and works flawlessly. Thanks for the work.
Sent from my SCH-I605 using xda premium
thejron said:
Getting device setup failed.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
You flashed the correct libs right. Also after you install the xposed apk, you have to open xposed inside the app as well and hit install, ensure the Google Wallet module is enabled then restart the phone and try again. I have a trouble shooting section since this also happened to me
Sent from my SGH-T889 using xda premium
killerapl said:
I've noticed if I hold it too close to the reader it will fail. I hold it around an inch above the reader.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Hmmm..I tried using it on babyrus and it asked me to enter pin and tapped again but failed. I will try your method this week
Sent from Verizon Note II
saint365 said:
Hmmm..I tried using it on babyrus and it asked me to enter pin and tapped again but failed. I will try your method this week
Sent from Verizon Note II
Click to expand...
Click to collapse
Okay, well during set up of wallet it should ask you to set up a pin. You enter it 2x, one to set and one to confirm. I open wallet before I purchase because it asks for my pin. There used to be a flashable zip for screen off. Let me know if this method works for you.
Sent from my SGH-T889 using xda premium
Hello All,
If you are running a sense rom and having problems with google apps, YouTube, Maps etc with the google play service not installing. Well here is a fix for that.
How to Install?
1.) Download update.zip and place on root of SDCard
2.) Reboot into recovery
3.) flash update.zip
4.) Wipe both caches
5.) reboot
6.) update google apps, and install Play services
Hopefully this helps anyone having problems with this. I have tested this on vigor360, but i don't see what it wouldnt work on other sense roms.
clmowers said:
Hello All,
If you are running a sense rom and having problems with google apps, YouTube, Maps etc with the google play service not installing. Well here is a fix for that.
How to Install?
1.) Download update.zip and place on root of SDCard
2.) Reboot into recovery
3.) flash update.zip
4.) Wipe both caches
5.) reboot
6.) update google apps, and install Play services
Hopefully this helps anyone having problems with this. I have tested this on vigor360, but i don't see what it wouldnt work on other sense roms.
Click to expand...
Click to collapse
Thanks, this may revive some of my favorite older ROMs...
clmowers said:
Hello All,
If you are running a sense rom and having problems with google apps, YouTube, Maps etc with the google play service not installing. Well here is a fix for that.
How to Install?
1.) Download update.zip and place on root of SDCard
2.) Reboot into recovery
3.) flash update.zip
4.) Wipe both caches
5.) reboot
6.) update google apps, and install Play services
Hopefully this helps anyone having problems with this. I have tested this on vigor360, but i don't see what it wouldnt work on other sense roms.
Click to expand...
Click to collapse
Care to describe what the update does?
MajikUF said:
Care to describe what the update does?
Click to expand...
Click to collapse
Yeah...its just replacing the package.xml file in the /data/system directory. The reason people are having problems is the gms or Google Play Services didn't have permission in that file or more simple put all the gms lines are missing from the file So when you went to install it. It checks the file and because the gms stuff isn't there it denies it or you get that shared id error. All this file does is add the gms lines needed for Google services nothing else is changed or modded.
Sent from my ADR6425LVW using xda app-developers app
clmowers said:
Yeah...its just replacing the package.xml file in the /data/system directory. The reason people are having problems is the gms or Google Play Services didn't have permission in that file or more simple put all the gms lines are missing from the file So when you went to install it. It checks the file and because the gms stuff isn't there it denies it or you get that shared id error. All this file does is add the gms lines needed for Google services nothing else is changed or modded.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I was having some problems with google maps, so I flashed this just to see what happens. On reboot I was greeted with a few FCing apps, and several apps that seemingly had their data wiped/reset. Some of my android settings reverted to default but not others.
Nandroid before you flash this zip.
CUBENSIS said:
I was having some problems with google maps, so I flashed this just to see what happens. On reboot I was greeted with a few FCing apps, and several apps that seemingly had their data wiped/reset. Some of my android settings reverted to default but not others.
Nandroid before you flash this zip.
Click to expand...
Click to collapse
Can you give more information...what ROM are you running, what carrier, are you running any mods or scripts, anything that might give a clue as to why this change might cause your symptoms. I'm interested in reloading some of the older ROMs on a couple spare Rezounds I have (just for the hell of it really) so I'm interested in your experience but I need more information.
Are you sure you had a good download?
Any more information would be a start...
CUBENSIS said:
I was having some problems with google maps, so I flashed this just to see what happens. On reboot I was greeted with a few FCing apps, and several apps that seemingly had their data wiped/reset. Some of my android settings reverted to default but not others.
Nandroid before you flash this zip.
Click to expand...
Click to collapse
Yes, like tired of bull stated can you give me some details about what your running so I can do some testing myself
Sent from my ADR6425LVW using xda app-developers app
clmowers said:
Yes, like tired of bull stated can you give me some details about what your running so I can do some testing myself
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Haha, I read your post before the post above it and wondered what about my post made you so "tired of the bull." I'm on sun_dreams ICS 4.04 Sense4+ ROM. Not the version posted in the forum, but an earlier version from May. Verizon. Sure, I've got a bunch of init.d scripts, but I just looked through all of them...nothing that I think would influence this. Here's my packages.xml: https://www.dropbox.com/s/px2hg2gp4wj6eyz/packages.xml
CUBENSIS said:
Haha, I read your post before the post above it and wondered what about my post made you so "tired of the bull." I'm on sun_dreams ICS 4.04 Sense4+ ROM. Not the version posted in the forum, but an earlier version from May. Verizon. Sure, I've got a bunch of init.d scripts, but I just looked through all of them...nothing that I think would influence this. Here's my packages.xml: https://www.dropbox.com/s/px2hg2gp4wj6eyz/packages.xml
Click to expand...
Click to collapse
Haha I see where that would be confusing. I thought the same thing when he posted and I saw tired of the bull..I was like wtf lol. Anywho thanks I'll look into this and see if I can get it working. Would you happen to have a copy of the ROM your running? If not no worries
Sent from my ADR6425LVW using xda app-developers app
OK the issue seems to be dirty flashing related. If its a clean install this works perfect. If its a dirty flash it doesnt work as well it does work but seems to have issues. I'm working on fixing that so no matter what it will work. Should be updated tonight
Sent from my ADR6425LVW using xda app-developers app
clmowers said:
OK the issue seems to be dirty flashing related. If its a clean install this works perfect. If its a dirty flash it doesnt work as well it does work but seems to have issues. I'm working on fixing that so no matter what it will work. Should be updated tonight
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Echo the needed lines to the XML? Or maybe add them in using sed ?
Sent from my Nexus 7 using Tapatalk HD
Snuzzo said:
Echo the needed lines to the XML? Or maybe add them in using sed ?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Yup that's what needs to happen. The thing is they need to go in a certain area within the file so I'm doing a little testing to make sure it doesn't screw up. Theres one other thing I'm gonna try is using the permissions folder and creating a separate file and add it to that directory instead of the package.xml
Sent from my ADR6425LVW using xda app-developers app
Maybe do a sed replace string alongside a cat of a text file.
Sent from my Nexus 7 using Tapatalk HD
Snuzzo said:
Maybe do a sed replace string alongside a cat of a text file.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Actually thats not a bad idea, I going to have to try that one. Didnt think about doing it like that, Thanks Snuzzo
clmowers said:
Actually thats not a bad idea, I going to have to try that one. Didnt think about doing it like that, Thanks Snuzzo
Click to expand...
Click to collapse
So was this updated? I'm having an issue where Google Hangouts force closes after a while and won't stop until I uninstall and reinstall it, so I was thinking about giving this a try. I think Hangouts ran for 6 days this last time before it started forceclosing.
First off thanks for stopping and seeing if you could help with my problem.
I used towelroot to gain root and tweak stock on sprint note 3, which worked perfectly. After installing busybox, supersu, and Xposed installer I went about reclaiming my phone from bloatware and limptard features. At one point I searched what apks were safe to remove from TW based roms, one that wasnt specified in the list was rakein.apk which I ASSUMED (<-- the whole reason for the headache...not confirming its true function) was part of scrapbook due to its icon....nope it controlled pen window.
I need to find a way to reinstall rakein.apk to system/app without it being cleared upon reboot.
Steps attemped so far:
Restored through original backup method-failed
Manually placed apk in system/app, corrected permissions to rwrr-failed
^ that plus mounted system r/w then unmounting partition for reboot-failed
Sideload-failed
---------------
Havent seen anything other fixes except a fresh flash from sammy.
Theres nothing changed on my sprint note 3 except for xposed and active modules all of which ive scoured for possible solution.
Sadly I didnt have a current sys backup either.
Thanks again for everyones help.
Have a good day.
You can always Odin back to stock and reroot. If everything else fails.
Jataadroid said:
First off thanks for stopping and seeing if you could help with my problem.
I used towelroot to gain root and tweak stock on sprint note 3, which worked perfectly. After installing busybox, supersu, and Xposed installer I went about reclaiming my phone from bloatware and limptard features. At one point I searched what apks were safe to remove from TW based roms, one that wasnt specified in the list was rakein.apk which I ASSUMED (<-- the whole reason for the headache...not confirming its true function) was part of scrapbook due to its icon....nope it controlled pen window.
I need to find a way to reinstall rakein.apk to system/app without it being cleared upon reboot.
Steps attemped so far:
Restored through original backup method-failed
Manually placed apk in system/app, corrected permissions to rwrr-failed
^ that plus mounted system r/w then unmounting partition for reboot-failed
Sideload-failed
---------------
Havent seen anything other fixes except a fresh flash from sammy.
Theres nothing changed on my sprint note 3 except for xposed and active modules all of which ive scoured for possible solution.
Sadly I didnt have a current sys backup either.
Thanks again for everyones help.
Have a good day.
Click to expand...
Click to collapse
Ya... I was just hoping there was a reason for not being able to just restore it but I guess I broke it lol. Thanks
Sent from my SM-N900P using XDA Premium 4 mobile app
I have not used touch wiz for a while but what does pen window do? I use Tasker to pop an application menu and change keyboards when I detach the S-Pen. I am using SlimRom also.
Sent from my SM-N900P using XDA Premium 4 mobile app
It is just Samsungs version of a floating app windows. Adjustable by drawing the desired dimensions with the s pen. Multiples of the same windows. Rooted and equipped with aean developed app, all apps are pen window compatible.
Maybe you missed the odex?
Remove .apk extension from odex file. added it only cause of xda file type filter.