I am running helly bean with the devil kernel. What exactly is LiveOC? Does it do the same thing as setting the max/min processor speeds in the performance settings?
Sent from my SGH-T959 using xda app-developers app
You probably can't change max above 1000 in performance. Live oc, from my understanding, increases the value by (x)% while scaling. So if you have it set at 120%, it will increase each value ex
120mhz, 240mhz ..up to 1200mhz or however high it will go. If you can set to 1200mhz with 120% live oc it would top out at 1440mhz.
I know that dkc app has target high/low setting as well but I don't know how that is configured.
There is more info on live oc and kernel settings. Try to search it on xda or Google search it, probably have better luck with Google.
I am Jack's smirking revenge.
I changed LiveOC to 120% and it threw my phone into a boot loop... I had restore it... luckily I had a backup.
Sent from my SGH-T959 using xda app-developers app
That can happen, some phones can't handle 120%, go down to 110%.
Were you able to change the CPU value above 1000?
I am Jack's smirking revenge.
Yeah. I am running at 1200 max right now... I'm not gonna mess with LiveOC though... I'm happy with the performance at 1200.
Sent from my SGH-T959 using xda app-developers app
Related
I'm running fauxs kernel but I scaled it back to 1 ghz. However, when I select Time ib each state I notice that it's still going past that frequency, what am I doing wrong?
Sent from my MB860 using XDA App
i am having same issue, i think set cpu only kicks in after the boot.
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Anyone?
Sent from my MB860 using XDA App
?
10 char
do you have set on boot selected?
yeah 10char
IUH1991 said:
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I meant to say setcpu only works after boot like cpu will be 1100 while booting after OS is loaded up setcpu gets super user permission and then scale cpu down.
If kernal has set clock to 1000 by defualt and only then it boots at 1000 and u can use setcpu to over clock it.
i guess old faux's 1.6 kernel was default 1000 new 1.7 is not.
ok folks lets debate this in detail witch
app is better for the atrix overall
ltdanno360 said:
ok folks lets debate this in detail witch
app is better for the atrix overall
Click to expand...
Click to collapse
+1 for SetCPU
frrst of all ever developer i have came across talks about using set cpu and it has specific version for xda community for free )try and top that )
2nd it has much more options then just over/under clocking and over/under volting.
3rd i havent found any problems with it yet so dont look for any other alternatives yet so hope this helps u with decision making.
+2 for SetCPU
Sent from my MB860 using XDA App
dag set cpu is popular i wonder why i have noticed less heat a huge differnce with cpu master
Sent from my MB860 using xda premium
+3 for set cpu
Joelesprod said:
+3 for set cpu
Click to expand...
Click to collapse
Make that +4
SetCpu pwns.
-Yo momma's so stupid she finds iOS complicated.-
I like setCPU but when I slide the max cpu to 1000 and I reopen setcpu it jumps to 1300... I tried CPU tuner today and it has scaling and gives you a ton of option settings. I going to try it out for a while.
Im using no-frills
Sent from my GT-S5570 using xda premium
I have tried both of those,but I have had better results and prefer the interface and options of System Tuner
Has anyone used set CPU I have it and it looks like u can really overclockit has anyone done it ??
sent from 3d greatness......
Yes....
</10char>
Yes my tp is running at 1.7 right now with setcpu with ondemand
Sent from my MB860 using xda premium
do you notice any real improvement from that overclock?
When i use set cpu and set the highest clock at 1 ghz it still goes past it to 1.2 ghz. Im useing siyah. Any help will be appreciated.
Sent from my SGH-I777 using xda premium
I doubt your kernel has anything to do with it because Siyah's kernel does support both OC and UC. Do you have any profiles that have a maximum of 1200Mhz instead of 1000Mhz? Those could be kicking in even when you don't want them to if you aren't careful.
Sent from my SGH-I777 using XDA
Nope I'm not using any profiles. Although in CWM in kernel specific options I did select performance mode if that has any thing to do with it
Sent from my SGH-I777 using xda premium
Try deselecting that option or selecting a different one. I don't have a ton of experience with Siyah, but a performance mode sounds to me like it will default to the maximum CPU speed. Which on the SGH-I777 is 1200Mhz, stock.
Sent from my SGH-I777 using XDA
dogfax said:
Try deselecting that option or selecting a different one. I don't have a ton of experience with Siyah, but a performance mode sounds to me like it will default to the maximum CPU speed. Which on the SGH-I777 is 1200Mhz, stock.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Ok I will try that out
Sent from my SGH-I777 using xda premium
Performance is a Governor for the CPU that sets it to Max frequency . That's what its FOR. So its doing what its supposed to. As previously stated you have to switch to a different governor in order to underclock.
Sent from my SGH-I777 using Tapatalk 2
Phalanx7621 said:
Performance is a Governor for the CPU that sets it to Max frequency . That's what its FOR. So its doing what its supposed to. As previously stated you have to switch to a different governor in order to underclock.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I'm not talking about the governor in CWM there is a option for default, battery and performance
Sent from my SGH-I777 using xda premium
No, he doesn't mean anything to do with CWM. When you're selecting or switching to a governor, a list comes up and depending on the governor, your CPU will behave a certain way. If the maximum is set at 1200Mhz and is going to that speed when you have performance governor on, that's what is supposed to happen.
Sent from my SGH-I777 using XDA
my governor is luzactive
dirtbikerr450 said:
my governor is luzactive
Click to expand...
Click to collapse
Uninstall any other clocking apps and clear application data (manage applications) for SetCPU.
Sent from my Galaxy S2
Change your governer to something other than lulzactive.
lulzactive forces your CPU at a certain rate. Thus, the "active". and the "lulz" on my end.
Since we now have Perseus kernel and we can tweak stuff, the cpu is easy enough to tweak. But for the gpu and voltage and charging etc... what's a good app that is compatible? I used to use STweaks with Siyah. But don't what's the best all round tweaking app
Sent from my GT-I9305 using xda app-developers app
btemtd said:
Since we now have Perseus kernel and we can tweak stuff, the cpu is easy enough to tweak. But for the gpu and voltage and charging etc... what's a good app that is compatible? I used to use STweaks with Siyah. But don't what's the best all round tweaking app
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I use AnTuTu and Quadrant
ps cpu crashes at 1800Mhz run at 1704
They are just benchmarking programs are they not? The OP was asking about a program that allows you to tweak the rom like Xtweaks or any of the others.
narcarsiss said:
I use AnTuTu and Quadrant
ps cpu crashes at 1800Mhz run at 1704
Click to expand...
Click to collapse
Yeh I never run it at the max just for saftey precautions, I already know how to tweak the CPU i am actually talking about tweaking everything else do you know any other software like Stweaks for Siyah?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Thanks ✟
Moving to Q&A
For GPU clocks and voltages you need to use scripts.
Sent from my GT-I9300 using xda premium
System monitor pro is pretty good
Sent from my GT-I9300 using Tapatalk 2
try SetCPU you can alter the governor and the voltage plus you can also check if the undervolt you did is stable