Hi everyone, if I had the chance to post this problem on the original FXP CM10' post I'm pretty sure I wouldn't be posting this right here, butttttttt....XDa doesn't allow me to reply that original post so I guess I have to post here a few time so I can go to the original post (Lemme know if I'm wrong of what I think about this of posting in Developer's section)
How I was saying, I just installed FXP 149, MB66 Extended ROM and I modified some brightness values (attenuate value from 20 (default) to 10), cus brightness was very high and I was trying to test if I can save some battery. Anyway the main problem came after when my device (Xperia Mini Pro) was USB conected to my PC cus I was transfering some music and I was charging in the meanwhile. The screen turned off after a min (like I confugured it) and then when I tried to turn it on pressing Home button it never turned on, NEVER. I had to remove battery to try restarting it and see if it was a random problem, but nothing happened; the device seeme dto start normally and then when the bootanimation ended it went black again but responding to my attempts to unluck it! Like if the device was runnning normally but with the scren turned off! Real weird stuff. Then I tried rebooting a few times more, nothing happened, tried to resintall ROM; again nothing happened. Then I tried wiping everything (factory reset, caché partition, dalvik caché) and then it turn on again and it booted normally. Now i'm trying to set the attenuate value from 20 to 12 to see if that was the problem or it was a random case of malfunction of undervolt... (cus the ROm is undervolted or the kernel, one of both. The thing is that there is undervolt to extend battery life).
Well, hope I get some support or opinnions or I don´t know
I'm newbie so please be patient with me See you!
problem with attenuate from 20 to 12 persists...only did full wipe and it's back running normally. I won't touch attenuate values again...hope it runs normally from now on
Related
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
SGS2 I9100 with Ressurection Remix ICS_v2.4_AOKP-B39-4.0.4
Device was working fine, battery was low (<5%) so i connected my charger; went to sleep, woke up and tried to turn display on - couldn't ... i thought that maybe phone was battery dead when i connected it so i long-press the power button to start it up but nothing was happening.
Disconnected the charger, took out the battery, waited 20s then put it back, connected charger and tried to power on => sgs2 splash screen .... .... ... showing desktop screen w/o icons and after 5-10s device shows "Shutting down" vibrates and shuts down.
Rebooted into CWM recovery, reinstalled ROM => no change
Rebooted into CWM, wipe data/factory reset => no change
Any ideeas what is going on? is the battery malfunctioning?
Try a new battery in the first instance. If it still happens once you've done that then we can look at other causes. Also, if you feel so inclined, do a clean install of stock & see if that fixes the issue to rule out something in your current setup (rom/kernel/etc) causing the problem.
thanks, been thinking the same about trying another battery but that is something i cannot do today
MistahBungle said:
Try a new battery in the first instance. If it still happens once you've done that then we can look at other causes. Also, if you feel so inclined, do a clean install of stock & see if that fixes the issue to rule out something in your current setup (rom/kernel/etc) causing the problem.
Click to expand...
Click to collapse
tried another battery, same.
flashed a stock, os load doesnt pass "S" screen
also i recharged battery on another phone and when i use it in mine, it gets drained quickly
guess the problem is the "power supply"
it already happened in the past, but it was some time that did not. I have revolution 26 (jb 4.1.2) + boeffla, no undervolt. I didn't change anything since when it worked well, it just starts to do it some periods. I also tried to change battery but nothing solved.
the problem is, when I turn off the screen sometimes battery crashes down as displayed in the graph, it's already the second consequent night it does that, even if it's offline with gentle alarm set (that obviously doesn't play). last evening it happened even with the phone not in flight mode e without alarm set, so I updated rom and kernel to try to solve but tonight it happened again, with consequent sleep through the alarm time.
what can I do?
Forum rules state that you must post in English. If you struggle to write in english, still try and put your language translation underneath.
The graph shows the phone shut down. It is not the battery at issue, but the phone. The phone crashed adn this used up a lot of battery. It could have been stuck on an operation such as writing to NAND or Boot loop.
Please add English to your post. I canot read it.
sorry I completely forgot to write in English ahahah, I just edited
another detail: my gs3 always makes 2 "turn screen off sound" when I turn the screen off. I don't know why. Anyway, I seem to remember that when the problem comes out the phone has made only one sound at the previous screen turn off.
also I use swiftkey but it just started (same time as the battery problem) to load the original keyboard everytime I reboot the phone. maybe it's just a coincidence, but maybe not..
I think we're looking at a factory reset
Sent from my GT-I9300 using Tapatalk 2
tonight it happened also if I left the phone on charge
A couple of questions:
1) should I try something (another modem, deactivating juicedefender or else) before factory reset?
2) after factory reset, should I avoid to install/flash things like my actual modem (though successfully used by a lot of people), boeffla kernel, juice def or else?
Factory reset and install as little as possible
Sent from my GT-I9300 using Tapatalk 2
I just got my umidigi a3 pro like a week ago and just today it started acting weird, the first time it just turned off and wouldn't turn on, after many tries it went back up. But after that, it got stuck into the umidigi screen, and it keeps turning on and off by itself.
I tried factory reset and wiping cache, then sometimes it would go into the google setup thing to setup the phone but after doing something like typing it would turn off and go back to start looping again.
So i flashed it with the official ROM, and now i got it working BUT if i restart the phone it would get stuck again. I tried to restart it many times and it got stuck, after many restarts it would boot sometimes.
Oh and i got some weird errors when it turned on sometimes like settings stopped working, gboard stopped working.
Sorry if i didn't give much details.
Any help would be much appreciated!
It's working now, but i noticed that it's getting warm/hot most of the times, even when idle.
And the cpu will go to 100% usage and frequency is going up and down on it's own, even if i just scroll or do simple things. Is that normal ?
battery temp is 35 on avg, cpu is 36 and goes up to 40 when reaching max frequency.
Thank you.
hi, what didi you do to resolve the situation of the phone?
Hello.
First of I'm a fan of this forum for a couple of years now but never had a chance to have an account until now (Still a total newbie), anyhow I tried to fix it myself for weeks now searching and looking for almost everything I can both Google and here but no avail. desperate as I'm now I decided to start this thread.
My phone is Sony Xperia XZ1 G8342, the problem is boot looping as I stated the possible reason I think it's because of low internal storage (64GB) I used around 90%, and yes I did clean up the cache from time to time but its keep building up back again. I have had experience with this problem before (only once) around 5 months back it kept looping so I force shut down > turn it on again repeat this process for the whole morning and suddenly it's back to normal.
How it started.
I charge the phone and Google play probably automatically updates all the apps, which is really dumb of me to turn this function on, then it freezes and starts restarting.
My goal.
I know people will tell me just be done with it and re-flashing or use a Sony PC companion. but in this phone, there's a data that hold dear to me, I know this sounds stupid in some aspects and yes it's totally my fault for not backing up some of these data and still relying on a 5-year-old phone. But I hope to fix it without losing all of these data and at least be able to access it for backing up.
More info on my phones.
None root.
The phone can turn it on normally but it's will restart itself once it reaches the Xperia logo (FYI: booting > Sony logo > Xperia logo)
When connecting to the PC and holding volume up the led light will turn blue (I'm not sure if this is Fastboot mode or something else) PC will detect as Android devices when checked on Device Manager.
When holding volume down + power then keep holding volume down the phone will vibrate after reaching the Xperia logo but still to no avail.
Sim card and Sd card are removed, same result.
The battery is replaced about 2 months ago.
All other parts except the battery are original.
It can charge normally.
USB debug mode is off. (very unfortunate)
I don't think XZ1 has recovery mode which really sucks since older models have it and newer ones also have it.
Any solution or suggestion is very welcome here, I'm not a native speaker my apologies for that.
I don't want to list what I have done so far because the way I have tried might not be correct, I might miss some tiny details or maybe I could try it again if you guys suggest.
Regards.