Battery crash (NOT drain!) during phone sleep - Galaxy S III Q&A, Help & Troubleshooting

it already happened in the past, but it was some time that did not. I have revolution 26 (jb 4.1.2) + boeffla, no undervolt. I didn't change anything since when it worked well, it just starts to do it some periods. I also tried to change battery but nothing solved.
the problem is, when I turn off the screen sometimes battery crashes down as displayed in the graph, it's already the second consequent night it does that, even if it's offline with gentle alarm set (that obviously doesn't play). last evening it happened even with the phone not in flight mode e without alarm set, so I updated rom and kernel to try to solve but tonight it happened again, with consequent sleep through the alarm time.
what can I do?

Forum rules state that you must post in English. If you struggle to write in english, still try and put your language translation underneath.
The graph shows the phone shut down. It is not the battery at issue, but the phone. The phone crashed adn this used up a lot of battery. It could have been stuck on an operation such as writing to NAND or Boot loop.
Please add English to your post. I canot read it.

sorry I completely forgot to write in English ahahah, I just edited

another detail: my gs3 always makes 2 "turn screen off sound" when I turn the screen off. I don't know why. Anyway, I seem to remember that when the problem comes out the phone has made only one sound at the previous screen turn off.

also I use swiftkey but it just started (same time as the battery problem) to load the original keyboard everytime I reboot the phone. maybe it's just a coincidence, but maybe not..

I think we're looking at a factory reset
Sent from my GT-I9300 using Tapatalk 2

tonight it happened also if I left the phone on charge
A couple of questions:
1) should I try something (another modem, deactivating juicedefender or else) before factory reset?
2) after factory reset, should I avoid to install/flash things like my actual modem (though successfully used by a lot of people), boeffla kernel, juice def or else?

Factory reset and install as little as possible
Sent from my GT-I9300 using Tapatalk 2

Related

USER FAULT Not KERNEL PANIC UPLOAD MODE

Does anyone know what this is, Or why it happens. my phone would crash and this screen would pop up. I did alot on my phone before it started to happen. I think it has something to do with GPS, but the only other people I have seen on the net to have this problem have different stories.
One says its after he rooted
Another person on the T-mobile forums reported it but didn't give a suspected reason.
Mine did it after three things happened I used the supl.google.com gps fix, and my battery showed an overheat warning when charging turned off. And My girl tried to send 15 pics she took to herself and cousin one through E-mail and the other through mms. The email and text messages to my girl gave me error messages that and a way to solve the problem (which didn't work) The only thing that worked was deleted her thread and the email.
I have since restored factory setting to see if it fixes the problems. I'll keep everyone updated.
If anyone has any ideas or has had this happen chime in maybe we can find out whats going on.
Factory Data reset was useless, it was a waste of time. It appears to be related to the GPS. After thinking about it, the radio probably burned out when i was trying to use gps while charging it in the car yesterday, it had to be 94 degrees outside probably hotter on the dash. The phone actually reset to the battery indicator and flashed a battery heat warning. Gps didn't last last long after that. It was the next morning when I started to get the error.
Called rep, and he gave me an exchange right away, no questions, will be getting another phone sat. or monday.
I realize this is a little old, but I just wanted to say that I just had the same problem today while I was using a navigation tool (Waze). I thought it might be related to the app, but maybe it is the GPS as op said.
I do realize this thread is months old but, likewise, I just had the same thing happen to me.
I wasn't using GPS though, I was simply trying to tether through usb.
Next thing I know the "kernel panic, upload mode" screen came up rendering my phone useless
I pulled the battery restarted, and did the same thing yet this time the screen didn't come up allowing me to tether and search the issue.
From the google search results I came across a thread where a guy said it had something to do with task managers/killers. He said since he unistalled the version he was using "advanced task manager" he never had the problem again.
which led him to believe it came from the wrong proccesses being killed or stopped by it which caused the kernel to crash.
Likewise...I too was using a task killer--Auto killer. So I uninstalled it as well, and now use the system default task manager to kill unwanted apps manually.
So far so good...Idk if this is the solution, but to any future readers that run across this and are having the same problem, I suggest you rid of any task killing apps that may be running. Manually kill apps on your own, and let android handle the rest.
I'm not saying dont use them at all but...unless you are an advanced enough user to understand how they work a little more, your best benefit is to leave it be.
Here are some tips that helped me fix this issue:
1. As someone said earlier, uninstall task killers. It's better to install an app that changes the os default task killer. I use autokiller and I use the preset optimum. This way the os can manage the processes and it will stay stable.
2. If you have setcpu, make sure to go to menu, autodetect device, and then set the minimum to 200.
3. If you flash a rom, if it's possible use a clockwork recovery image instead of using Odin.
After these steps, it never happened to me again.
crazy25000 said:
Here are some tips that helped me fix this issue:
1. As someone said earlier, uninstall task killers. It's better to install an app that changes the os default task killer. I use autokiller and I use the preset optimum. This way the os can manage the processes and it will stay stable.
2. If you have setcpu, make sure to go to menu, autodetect device, and then set the minimum to 200.
3. If you flash a rom, if it's possible use a clockwork recovery image instead of using Odin.
After these steps, it never happened to me again.
Click to expand...
Click to collapse
I was using Autokiller too....I uninstalled it and everything seems fine, Idk, may had nothing to do with it...because I've used Autokiller for quite a while, way back on my G1 and never had that problem, oh well...appreciate your input.
I had several "kernel panic" warnings on my handset which I replaced. If I remember it was after using Google maps right after an update and it was hot as a ***** and could smell components melting. As far as autokiller the experience I had was that say I was online Google reader decided to check XDA for instance,go back to Steel would have closed the App out.this happened using visual task swithcher and the default last used programs panel. So I don't use it for that reason.
if your phone is Loki, use Odin, you'll be Thor.
Thread moved to Q&A.
I think this is related to some applications. This is happening to me also, I am on Stock 2.2 Rooted. First I noticed this one when I was online on Nimbuzz and my yahoo account was logged in through nimbuzz, and when I started Yahoo messenger with the same login ID I got "USER FAULT NOT KERNEL PANIC". It happened with same scenario again & again. So I dont use both together.
Again I noticed when I kept my phone on charging through USB connected to a PC, sometimes my fon went in the same Panic mode without doing anthing.
Somebody needs to find out why this is happening. some application or process is causing this problem which needs to be find out.
Vibrant Crash Response
I have the same problem! It's happened about 20 times to my phone. It crashes, gets hot as ****, and gives me the 'user fault kernel panic upload mode' screen.
I think I've narrowed it down a little though.
Things I've noticed:
1.. It only happens when the phone is charging, never on battery.
2.. It only happens after the screen is turned off, never while I'm using it (anywhere from 5 min to hours after the screen has been off).
I'm guessing its some kind of background process that uses a lot of processing power and overheats the phone..
Hope this helps. Be sure to post up if you find a solution.. I don't want to burn it up!
Just for confirmation sake are we all seeing the same Kernel Fault error? are you seeing the same codes?
RST_STAT 0X4
PMIC_IRQ1 0x0
PMIC_IRQ2 0x0
PMIC_IRQ3 0x0
PMIC_IRQ4 0x0
PMIC_STATUS1 0x0
PMIC_STATUS2 0x0
Also i have tried three different Kernels so i am pretty sure this is going to be a hardware issue.
I may be wrong though, in my case it could be a task killer.
Need help! What can we do?
My cousin had the same problem but, It did happenned on battery power, he did not activated the GPS or Google Map.
The phone is practically bricked. It does not boot to android. We tried everything and came up with no results. Even we get the battery off and waited like a minute or so, plug it back and try to turn it on and it just got us to the same screen with the message saying something about kernel panic upload mode and a bunch of red numbers at the upper left corner. He does not installed any task killer either.
I think he was trying to install a .zip file from the SD Card in clockwork recovery mode. Now we can't even get to recovery mode!
What can we do?
hardware problem
I have been running on I997UCKI4 rom. Now a days the phone suddenly keeps getting into "user fault kernel panic upload mode" and phone would not even go into 3e recovery mode.
I have to take out the battery and put it back again. It keeps heating up until I do that.
Please help.
My original vibrant had this error...
turns out was bad hardware, replaced phone and havent had the problem since.[lots of other problems but not this one]
good luck
i have some issue too
anyone can resolve it?
i get this when i reload new ROM for my galaxy tab..
always shown "KERNEL PANIC RELOAD MDOE"
please help
Same problem
Mine too. What should I do?
I was flashing to stock firmware. Then this error appeared. and i couldn't restore because it doesn't even boot.
PLease help asap. It was my birthday gift.
its nothing to do with GPS.
Jnt
My samsung infuse 4g keeps turning itself off. If I take the battery out then put it back, the phone starts working eventually shuts down again.and gives message user fault not kernal panic upload mode And phone going heat also. Plz tell solution
do anyone find any solution please?

[Q] Galaxy S2 display wake up in sleep mode

Hello!
My problem: I push the power button short on my Galaxy S2 to go sleep mode. The screen is goes black, the phone went sleep mode. I leave it on the table and I see the display is light up for 1-2 seconds and then off. This happening for 4-5 times then the sleeping continues for a long period.
What causes this problem? What can I do against it?
I've ben uninstalled almost all later installed programs, stay only stock apps +Titanium Backup, SPB Shell 3D, Dropbox, iGO, Adobe Reader, LogMeIn and Superuser (packaged in DoomLord's Easy rooting toolkit - that I've ben used to rooting my phone). Factory unlocked, rooted phone. All mobile data connection disabled - aviabled network connections are wifi and USB. I'm not using live wallpaper.
I think one of the apps try connectint to internet at this time, because when I turn on the wifi I get an application advise.
Android version: 2.3.4 Gingerbread
Build: GINGERBREAD.XWKI4
Any solution, suggestion?
(sorry my bad english)
Georgie9117 said:
Hello!
My problem: I push the power button short on my Galaxy S2 to go sleep mode. The screen is goes black, the phone went sleep mode. I leave it on the table and I see the display is light up for 1-2 seconds and then off. This happening for 4-5 times then the sleeping continues for a long period.
What causes this problem? What can I do against it?
I've ben uninstalled almost all later installed programs, stay only stock apps +Titanium Backup, SPB Shell 3D, Dropbox, iGO, Adobe Reader, LogMeIn and Superuser (packaged in DoomLord's Easy rooting toolkit - that I've ben used to rooting my phone). Factory unlocked, rooted phone. All mobile data connection disabled - aviabled network connections are wifi and USB. I'm not using live wallpaper.
I think one of the apps try connectint to internet at this time, because when I turn on the wifi I get an application advise.
Android version: 2.3.4 Gingerbread
Build: GINGERBREAD.XWKI4
Any solution, suggestion?
(sorry my bad english)
Click to expand...
Click to collapse
Same problem here. Sometimes when i put the phone to sleep, after a short period of time the screen turns on, and stays so until i put it again to sleep or wait until the timer (i use 15 seconds here) to power the screen off. This happens with or without wifi/3g so i think that's not a problem with an app trying to access internet.
Other annoying issue is when i'm charging the phone, sometimes when it reaches 100%, the screen turns on to say that's full charged, and continues on like.... forever. I noticed that when i put the phone to charge before sleeping and mornings when i go take the phone off the charge, the screen is already on for a long time.
Im using Stock Frankestein ROM 2.3.6 XWKK5 with CF "stock" root Kernel, with out Set CPU or any other Governor. Also using stock launcher.
84tdan said:
Same problem here. Sometimes when i put the phone to sleep, after a short period of time the screen turns on, and stays so until i put it again to sleep or wait until the timer (i use 15 seconds here) to power the screen off. This happens with or without wifi/3g so i think that's not a problem with an app trying to access internet.
Other annoying issue is when i'm charging the phone, sometimes when it reaches 100%, the screen turns on to say that's full charged, and continues on like.... forever. I noticed that when i put the phone to charge before sleeping and mornings when i go take the phone off the charge, the screen is already on for a long time.
Im using Stock Frankestein ROM 2.3.6 XWKK5 with CF "stock" root Kernel, with out Set CPU or any other Governor. Also using stock launcher.
Click to expand...
Click to collapse
i have a similar issue , opened a thread here :
http://forum.xda-developers.com/showthread.php?t=1405606
also added logcat , you can see the process thats trying to run multiple times , and wont stop until i press something .
this is very bad .if this happens at night , your phone might stay with screen on for hours , with the same image , the image will burn onto the screen eventually .
i'm running 2.3.6 KK5, siyah kernel , go launcher ,pattern lockscreen .
Thank you for hints guys!
I think I find it! I use SPB Shell 3D launcher. In the settings of this app checked the 'using mobile data network to download weather informations' (or something like). I unchecked it and this effect was gone - at least last evening... Now I using wifi and reinstalled all applications like before and now no ads.
But this means I think well - an application try to access internet (with GSM data connection) but the service provider denied, beause I've no subscribe.
So I advocate for you to search something settings like this in your apps.
i have that issue as well..i tried few different roms and kernels but no luck. so its hardware issue i think.. .
Used to happen to me a lot,until i installed Go launcher and Go locker.I know its not exactly a solution but at least its working,plus anything else than the stock samsung lock screen is soooo much better.
And the end... Uninstall all apps which are using ads whit AirPush technology. How do you know which are they? The AirPush Detector helps you find them - search on Google Play it's free!
Thanks for your attention!
20590630
hackinistrator said:
i have a similar issue , opened a thread here :
http://forum.xda-developers.com/showthread.php?t=1405606
also added logcat , you can see the process thats trying to run multiple times , and wont stop until i press something .
this is very bad .if this happens at night , your phone might stay with screen on for hours , with the same image , the image will burn onto the screen eventually .
i'm running 2.3.6 KK5, siyah kernel , go launcher ,pattern lockscreen .
Click to expand...
Click to collapse
thanks. you can see the process thats trying to run multiple times , and wont stop until i press something .
this is very bad . Pasta tarifleri

[Q] Suddenly, OS doesnt load

SGS2 I9100 with Ressurection Remix ICS_v2.4_AOKP-B39-4.0.4
Device was working fine, battery was low (<5%) so i connected my charger; went to sleep, woke up and tried to turn display on - couldn't ... i thought that maybe phone was battery dead when i connected it so i long-press the power button to start it up but nothing was happening.
Disconnected the charger, took out the battery, waited 20s then put it back, connected charger and tried to power on => sgs2 splash screen .... .... ... showing desktop screen w/o icons and after 5-10s device shows "Shutting down" vibrates and shuts down.
Rebooted into CWM recovery, reinstalled ROM => no change
Rebooted into CWM, wipe data/factory reset => no change
Any ideeas what is going on? is the battery malfunctioning?
Try a new battery in the first instance. If it still happens once you've done that then we can look at other causes. Also, if you feel so inclined, do a clean install of stock & see if that fixes the issue to rule out something in your current setup (rom/kernel/etc) causing the problem.
thanks, been thinking the same about trying another battery but that is something i cannot do today
MistahBungle said:
Try a new battery in the first instance. If it still happens once you've done that then we can look at other causes. Also, if you feel so inclined, do a clean install of stock & see if that fixes the issue to rule out something in your current setup (rom/kernel/etc) causing the problem.
Click to expand...
Click to collapse
tried another battery, same.
flashed a stock, os load doesnt pass "S" screen
also i recharged battery on another phone and when i use it in mine, it gets drained quickly
guess the problem is the "power supply"

[Q] [Question] Problems with CM10?

Hi everyone, if I had the chance to post this problem on the original FXP CM10' post I'm pretty sure I wouldn't be posting this right here, butttttttt....XDa doesn't allow me to reply that original post so I guess I have to post here a few time so I can go to the original post (Lemme know if I'm wrong of what I think about this of posting in Developer's section)
How I was saying, I just installed FXP 149, MB66 Extended ROM and I modified some brightness values (attenuate value from 20 (default) to 10), cus brightness was very high and I was trying to test if I can save some battery. Anyway the main problem came after when my device (Xperia Mini Pro) was USB conected to my PC cus I was transfering some music and I was charging in the meanwhile. The screen turned off after a min (like I confugured it) and then when I tried to turn it on pressing Home button it never turned on, NEVER. I had to remove battery to try restarting it and see if it was a random problem, but nothing happened; the device seeme dto start normally and then when the bootanimation ended it went black again but responding to my attempts to unluck it! Like if the device was runnning normally but with the scren turned off! Real weird stuff. Then I tried rebooting a few times more, nothing happened, tried to resintall ROM; again nothing happened. Then I tried wiping everything (factory reset, caché partition, dalvik caché) and then it turn on again and it booted normally. Now i'm trying to set the attenuate value from 20 to 12 to see if that was the problem or it was a random case of malfunction of undervolt... (cus the ROm is undervolted or the kernel, one of both. The thing is that there is undervolt to extend battery life).
Well, hope I get some support or opinnions or I don´t know
I'm newbie so please be patient with me See you!
problem with attenuate from 20 to 12 persists...only did full wipe and it's back running normally. I won't touch attenuate values again...hope it runs normally from now on

[Q] Phone won't sleep, process won't go away

Hey guys.
Had some trouble on my Z2 and thought I'd create an account here and ask for your advice before I did something stupid. Have no experience with rooting or modding whatsoever, so bear with me please.
I bought a Z2 whose screen never slept. I found out that the responsible was com.sonyericsson.startupflagservice v2, who would always run when I turned the phone on and remained on my notification area with no text, just an icon resembling two blue screens superposed. If I force stopped the process, the phone would sleep normally until I powered it off. When I turned it on, the process would be there again preventing sleep.
I did some research and learned how to flash a different ROM, wipe cache, wipe dalvik... Did all that and the process would still be there. Rooted my phone, bought Titanium Backup and froze the process... it worked fine, but would I reset to factory settings, there was the process again.
And finally I come to my question: would un-installing the process and wiping its data with Titanium backup work? Would I be at risk of bricking my phone?
I'm running out of options on what to do and returning isn't really an option!
Thank you very much!
Phone: Xperia Z2 D6503
Android v: 4.4.2
Build number: 17.1.2.A.0.314
Please let me know if there is any other info I can provide you with in order to find a solution. Thanks again!
busseto said:
Hey guys.
Had some trouble on my Z2 and thought I'd create an account here and ask for your advice before I did something stupid. Have no experience with rooting or modding whatsoever, so bear with me please.
I bought a Z2 whose screen never slept. I found out that the responsible was com.sonyericsson.startupflagservice v2, who would always run when I turned the phone on and remained on my notification area with no text, just an icon resembling two blue screens superposed. If I force stopped the process, the phone would sleep normally until I powered it off. When I turned it on, the process would be there again preventing sleep.
I did some research and learned how to flash a different ROM, wipe cache, wipe dalvik... Did all that and the process would still be there. Rooted my phone, bought Titanium Backup and froze the process... it worked fine, but would I reset to factory settings, there was the process again.
And finally I come to my question: would un-installing the process and wiping its data with Titanium backup work? Would I be at risk of bricking my phone?
I'm running out of options on what to do and returning isn't really an option!
Thank you very much!
Phone: Xperia Z2 D6503
Android v: 4.4.2
Build number: 17.1.2.A.0.314
Please let me know if there is any other info I can provide you with in order to find a solution. Thanks again!
Click to expand...
Click to collapse
Interesting questions... I've also experienced this.
After about 30 mn of waiting, startupflagservice had finished its job (I don't know what it is doing).
Anyway, I don't recommend to uninstall it.
See if flashing the .402 FTF solves this? Maybe it is a random bug in the .314 firmware. I haven't got this process running so I can't comment on it. Have you got power saving features enabled? If so, is the battery drain still bad with the process running?
I know I am asking a lot of questions but there are multiple things that could be causing the issue. When you factory reset the stock ROM, does it occur after you have installed apps or before? There could be a rogue app keeping the phone awake. Install either:
Betterbatterystats (https://play.google.com/store/apps/details?id=com.asksven.betterbatterystats)
Wakelock detector (https://play.google.com/store/apps/details?id=com.uzumapps.wakelockdetector)
Hopefully either app should give you a better insight as to what is keeping your phone from deep sleep.
EDIT: Also, according to quite a few lists, that particular thing (com.sonyericsson.startupflagservice v2) is safe to delete. If you are rooted and have a custom recovery, make a nandroid backup (ask if you don't know what it is or how to do so) and then go ahead and delete it using ES file explorer. Worst case scenario your phone reboots/gets stuck in a bootloop or something and you can just restore the nandroid.
Thanks for the replies, guys!
I'll try flashing the .402 FTF next weekend. Unfortunately, I don't have much time to tinker with the phone on weekdays anymore. I have reasons to believe the current firmware is not the responsible though, as this problem occurred on the firmware that came on the phone (don't remember which one it was), and continued after I updated to .314 through the PC Companion.
Answering your questions, Devzz:
I have no power saving features enabled.
I haven't noticed any battery drain, as I didn't allow it to happen... I usually turned the screen off with the power button, which worked... the only problem was the phone not sleeping by itself after the inactivity period I set.
The problem occurs right after I turn the phone on. As soon as I turn it on after a reset and every time thereafter, I'm greeted by a black screen with a big black button that reads: POWER OFF. If I click it, nothing happens. When I press Back or Home, I'm on my home screen with the icon I mentioned on my original post on the notification bar.
I'm starting to think I just had bad luck and got a defective piece of hardware. There's another problem now that didn't happen before the update: the volume of the notifications now is always low, regardless of how much I set on the slider on Settings > Sound > Volumes. I've noticed some people had this problem as well, and I could temporarily fix it by enabling Dynamic normalizer and xLoud on the Sound Effects, although that is hardly an ideal solution.
Thanks very much again for your help! I'll look into the nandroid backup and try that next weekend.
P.s.: another piece of information that I haven't mentioned and may be relevant: I was never able to access recovery mode, despite my efforts to do so. I had to install XZDualRecovery to be able to boot into recovery mode.
busseto said:
Thanks for the replies, guys!
I'll try flashing the .402 FTF next weekend. Unfortunately, I don't have much time to tinker with the phone on weekdays anymore. I have reasons to believe the current firmware is not the responsible though, as this problem occurred on the firmware that came on the phone (don't remember which one it was), and continued after I updated to .314 through the PC Companion.
Answering your questions, Devzz:
I have no power saving features enabled.
I haven't noticed any battery drain, as I didn't allow it to happen... I usually turned the screen off with the power button, which worked... the only problem was the phone not sleeping by itself after the inactivity period I set.
The problem occurs right after I turn the phone on. As soon as I turn it on after a reset and every time thereafter, I'm greeted by a black screen with a big black button that reads: POWER OFF. If I click it, nothing happens. When I press Back or Home, I'm on my home screen with the icon I mentioned on my original post on the notification bar.
I'm starting to think I just had bad luck and got a defective piece of hardware. There's another problem now that didn't happen before the update: the volume of the notifications now is always low, regardless of how much I set on the slider on Settings > Sound > Volumes. I've noticed some people had this problem as well, and I could temporarily fix it by enabling Dynamic normalizer and xLoud on the Sound Effects, although that is hardly an ideal solution.
Thanks very much again for your help! I'll look into the nandroid backup and try that next weekend.
P.s.: another piece of information that I haven't mentioned and may be relevant: I was never able to access recovery mode, despite my efforts to do so. I had to install XZDualRecovery to be able to boot into recovery mode.
Click to expand...
Click to collapse
I have the exact same problems with my phone not going to sleep and the big "power off" button. What the heck does it mean? Anyone fix this problem yet?
matase said:
I have the exact same problems with my phone not going to sleep and the big "power off" button. What the heck does it mean? Anyone fix this problem yet?
Click to expand...
Click to collapse
In spite of my efforts, I couldn't find a way to get rid of the problem. Currently I have the phone rooted, installed Titanium Backup and deleted the files related to the process.
It's working, although if I ever revert to factory settings, the problem will be there again.
Best of luck to you and please let me know if you find a fix.
busseto said:
In spite of my efforts, I couldn't find a way to get rid of the problem. Currently I have the phone rooted, installed Titanium Backup and deleted the files related to the process.
It's working, although if I ever revert to factory settings, the problem will be there again.
Best of luck to you and please let me know if you find a fix.
Click to expand...
Click to collapse
Which process/es did you exactly delete? What are those files for the process are even doing? When did this problem start for you? Thanks
On mine that service displayed a persistent notification and on every reboot it prompted to power off or use phone. Anyway, as soon as I saw that I rooted and froze com.sonyericsson.startupflagservice in titanium backup. Problem solved! As far as I've tried it's not essential and can be uninstalled as well. I really don't get how they overlooked this, it's a huge annoyance for anyone that can't root the phone I imagine.
Solution!!!!!
I had the same issue on a Z2 I bought off a guy. It was on 4.4.2 and it kept saying no update available. I downloaded and flashed the 5.0.2 update via Sony Flashtool. At first boot the issue appear again after a few seconds. It got very intense with the screen becoming unusable. The phone shut itself down and rebooted without the issue. Gone and nowhere to be found. I immediately got another prompt to update to a newer Android version - same 5.0.2 (17MB file).
So flash away, guys!!!

Categories

Resources