At night even at 0% brightness I find the phone too bright and would like a way to lower it. I also think the minimum volume level is too loud to be comfortable in a quiet room and would like a method to lower that as well. My last request is a technique to seperate ringtone and notification volume levels. If any of these are actually possible through MODs without hobbled fixes by apps in the Play Store, I would love it! I'm running a modded stock non-deodexed ROM with unlocked bootloader and ROOT. Please help and thanks!
techwynn said:
At night even at 0% brightness I find the phone too bright and would like a way to lower it. I also think the minimum volume level is too loud to be comfortable in a quiet room and would like a method to lower that as well. My last request is a technique to seperate ringtone and notification volume levels. If any of these are actually possible through MODs without hobbled fixes by apps in the Play Store, I would love it! I'm running a modded stock non-deodexed ROM with unlocked bootloader and ROOT. Please help and thanks!
Click to expand...
Click to collapse
to lower the autobrightness values, everything is in /system/framework/framework-res.apk - res/values/arrays.xml
reference:
http://forum.xda-developers.com/showthread.php?t=1904691
andybones said:
to lower the autobrightness values, everything is in /system/framework/framework-res.apk - res/values/arrays.xml
reference:
http://forum.xda-developers.com/showthread.php?t=1904691
Click to expand...
Click to collapse
Thanks for the reply! Will modifying these values enable the phone to go lower than the stock 0% brightness? I don't use auto brightness and keep my DNA at 0% brightness most of the time, only going higher in sunlight.
techwynn said:
At night even at 0% brightness I find the phone too bright and would like a way to lower it. I also think the minimum volume level is too loud to be comfortable in a quiet room and would like a method to lower that as well. My last request is a technique to seperate ringtone and notification volume levels. If any of these are actually possible through MODs without hobbled fixes by apps in the Play Store, I would love it! I'm running a modded stock non-deodexed ROM with unlocked bootloader and ROOT. Please help and thanks!
Click to expand...
Click to collapse
I don't know if you'll consider this a "hobbled app" fix, but I've been using Power Toggles to substitute for my CM habit.
You can adjust notification and ringtone volumes from the notification drawer that way.
Sent from my HTC6435LVW using xda app-developers app
androidxen said:
I don't know if you'll consider this a "hobbled app" fix, but I've been using Power Toggles to substitute for my CM habit.
You can adjust notification and ringtone volumes from the notification drawer that way.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestion. I tried it out and while it does have separate sliders for the two volumes, it does NOT actually work. The two volumes are still tied together in practice. After ICS I think I've read its linked at a system or kernel level and I was hoping someone might work on a fix to address this. Also, referring to "hobbled" app fixes, I saw an app that used a workaround by switching to a custom ringtone to adjust that volume separately but was hoping for a streamlined system built in mod so that I don't have any extraneous apps or screens to delve into to adjust settings. I like minimalistic and debloat anything I dont use. Thanks again for the feedback.
i agree 100% with the sound being too loud, which has been an issue since ICS on even the Rezound...so i think their whole upgrade of the newer OS's made the volume louder. the rezound, on lowest sound level, was 20%..that's ridiculous, it should be half that, or around like 5%. even changing volume steps never worked because there was no lower volume.
Related
I just switched to ARHD 31.0 from CM 10.2 (had terrible battery life, but I loved the light vibration notification) and I forgot how intense the vibration is on the Sense ROMs. I turn my phone on vibrate only at work to be respectful of others, but honestly this phone's vibration is just as loud as having a ringtone. It's way too much. Does anyone know of a way to reduce the vibration intensity? I've looked all over the forums and haven't found much info other than taking apart the phone....
I know that you can adjust the length and pattern of the vibration, but I really need a way to turn this down significantly. Thanks.
This isn't quite what you asked for, but is my solution to the same problem.
It seems like most of the volume associated with the vibrate function is due to being placed directly on a hard surface that will transmit and intensify the noise. If you place something that doesn't transmit the vibrations well it drastically reduces the volume while still letting you hear the phone when at your desk. I use a small carpet sample (about 8"x6") as a coaster on my desk and when I put my phone down I place it on that as well. It really cuts down on the noise, but not enough that you won't notice it when at your desk. If the carpet is in use, I just place my phone on a pad of post-its or a note pad, which doesn't work quite as well, but close enough for my situation.
Try using the Trickster mod from the playstore
Ktan188 said:
Try using the Trickster mod from the playstore
Click to expand...
Click to collapse
This worked beautifully for me! Thanks Ktan! Had been searching google for an hour, then facepalmed myself for not even checking xda. Lol
Ktan188 said:
Try using the Trickster mod from the playstore
Click to expand...
Click to collapse
I've been searching this for a while now. Tx for helping..
***Easier method***
If you want to get rid of vibration completely, but without putting your phone on silent, just use App Ops! You need something to launch the activity, there are App-ops launchers in Play Store or you could just use a Tasker task. Once you're in, just go through all your apps and untick the "Vibration" permission!
No root required!!!
<<< Please say thanks if I was of help!
Ktan188 said:
Try using the Trickster mod from the playstore
Click to expand...
Click to collapse
many thanks, i was even considering turn to CM before seeing that
I want to reduce the minimal brightness from 20 to 10. Now I use the app YAAB, but can this easier?
I set in build.prop ro.lcd_min_brightness=10 and find this in /sys/class/backlight/panel/brightness correctly, but see no effect
rp158 said:
I want to reduce the minimal brightness from 20 to 10. Now I use the app YAAB, but can this easier?
I set in build.prop ro.lcd_min_brightness=10 and find this in /sys/class/backlight/panel/brightness correctly, but see no effect
Click to expand...
Click to collapse
Do you not have a brightness adjustment in your rom settings?
Darke5tShad0w said:
Do you not have a brightness adjustment in your rom settings?
Click to expand...
Click to collapse
Sorry, I gave too few info: I wonna stay on TW-base and there's only the slider, which doesn't make lower brightness than 20 (with the edits, I mentioned).
CM-, AOKP-roms offer manual adjustment and with that I got lower brightness.
I use this app when I'm reading something at night:
https://play.google.com/store/apps/details?id=pt.bbarao.nightmode
You may invert color to turn whites into black and reduce screen consumption, w/o installing or tweaking anything
I use black themes and I can adjust brightness lower than 20 by an app. My question is&was: how can I simply adjust it by system-value?
laxsrbija said:
I use this app when I'm reading something at night:
https://play.google.com/store/apps/details?id=pt.bbarao.nightmode
Click to expand...
Click to collapse
Thanks for the suggestion, good tip
I'm running the recent SlimKat (OmniRom-based) now. But I don't get brightness lower than 20 by settings, too, even if I set in build.prop ro.lcd_min_brightness=5 and in brightness-settings 0lux /0%. Strange...
I found this xposed module, 'screen filter', works great!
Hello, I use this application called screen filter, hope you serve https://play.google.com/store/apps/details?id=com.haxor
@bruno.filter: I use it, too. Slim and easy. @Joker87: I avoid xposed atm, because almost every discussion with dev's about any bug begins with 'if you use it, sorry...'
Change the minimum brightness level from usual 10 to 1. It doesn't modify the autobrightness level map so automatic brightness won't be lowered (though it can be easily adjusted on CM11).
This is so far exactly the same as GravityBox offers (modifying 'config_screenBrightnessSettingMinimum').
But Minimum Brightness offers one unique feature - it also modifies the lower brightness levels in MX Player (free/paid). Because no matter whatever you use manual or auto brightness, MX Player always uses minimum brightness of 0.05 (12/255, 19/255, 27/255, 36/255...). To actually lower the brightness, you would have to turn off brightness control in MX Player or use one of many 'overlay filter brightness app'.
So Minimum Brightness module retains the same quadratic function for brightness levels but includes lower values (1/255, 4/255, 9/255, 16/255, 25/255...).
Minimum Brightness uses value 1/255 which might not be suitable for every display (meaning LCD) but it suits perfectly my Super AMOLED screens (Galaxy S5 / Galaxy Tab S 8.4) and watching videos at night is still enjoyable.
There are many excellent auto brightness apps (Lux, Darker etc) that can use overlay filters to lower brightness even more so it's up to everyone to try and decide.
This module has been merged into new module http://forum.xda-developers.com/xposed/modules/mod-xposed-tweaks-cm-t3279109. Please check that module for any future updates.
Hello! Thanks for the mod, I will test
Works very nice on Xperia Z2, however minimum brightness is absolute darkness Could you please add an option to define minimum brightness value?
_mysiak_ said:
Works very nice on Xperia Z2, however minimum brightness is absolute darkness Could you please add an option to define minimum brightness value?
Click to expand...
Click to collapse
The situation is the same on my Xperia SP. When I set the brightness to miniumum the screen is totally black, also when the backlight decreases after 10 seconds screen gets black.
Hi! Tried min brightness but when screen is set to the lowest level, I get a white screen after locking the phone.
Sent from my DIAMOND D1 using XDA Free mobile app
Really great tweak!! I'm noobie in Android enviroment with my new Elephone P3000S and the lowest screen brightness is to high for me so your tweak is very usefull.
I also have the issue that the lowest brightness level sets the screen completly black and I have been scared for 1 hour truing to solve a completely black, touching all buttons but the phone didn't "wake up". Finally, pressing power buttom + volumen up + home soft key it has worked :angel:
So it would be very important to prevent black screen by allowing the user to set the minimun level.
Thanks!
Hey, I know making GUI is a pain in the ass so can you please make alternative version with minimum brightness set to 2? That will satisfy most of people complaining here. Your app is currently the only dimmer working on lollipop.
Dri0m said:
Hey, I know making GUI is a pain in the ass so can you please make alternative version with minimum brightness set to 2? That will satisfy most of people complaining here. Your app is currently the only dimmer working on lollipop.
Click to expand...
Click to collapse
I will have a new device soon so that could make me change my mind about lowest value and UI.
@Dri0m
In the first post you can find archive containing multiple versions of module with different low values.
How to disable this module...?
I installed this module last night, enabled it in Xposed Framework, but did nothing with it. Then this afternoon I opened the Settings menu, went to Display, and before I could do anything else I received a phone call. As I terminated the call, the screen flashed, the phone rebooted--and after restarting it is completely, or almost completely blank. If I repeatedly tap the power button I get a fraction-of-a-second glimpse of the SIM PIN screen at normal brightness. This leads me to the suspicion that, by some weird combination of bad luck and an accidental touch of a finger after terminating the phone call, that the Minimum Brightness somehow got set--although why the phone then rebooted I don't know.
Anyway, by luck and good judgement I finally managed to enter the correct SIM PIN and then the phone unlock PIN. However, I can do nothing else. The screen is still blank, and as the phone is currently unlocked I don't want to touch the power button. Before sending the phone back to the manufacturer or anything drastic like that, I would like to try disabling the Xposed Framework. Whilst trying to find something useful in Windows Explorer I found Xposed-Disabler-Recovery.zip in the Internal storage\Android\data\de.robv.android.xposed.installer\files folder on my phone. I assume that this should be what I need. However, as I cannot see anything on the screen I would need to know the exact buttons to press, in which order and how many times etc, in order to enter the Recovery menu and do what is needed. According to the phone manufacturer the OS is unmodified Android 4.4.2., although strangely they will not even tell me which keys to press to enter the Recovery menu (long story, the upshot is, they flat out refuse to help apart from suggesting returning the phone).
Note that I only suspect it is the Minimum Brightness module that is causing the problem, however the problem did not exist before yesterday (when I installed the module), and as I was about to do something with the brightness when the phone rebooted itself, it seems too much of a coincidence to be anything else. If I cannot disable the module/framework, the only other thing I can think of is a factory reset--but again I would need to know exactly which buttons to press, in which order etc. Unfortunately at the moment USB debugging is not enabled, and again without the screen I cannot access it to turn it on.
Any help or suggestions hugely appreciated.
PL
@Papalazzzaru
Xposed now sports a safemode which allows you to disable Xposed during bootloops. To disable Xposed, you'll have to repeatedly tap one of the hardware buttons (Power, Volume, or Home) on your device during startup.
During boot, your device will vibrate twice when it detects the first key press. You'll then have five seconds to press that same button four more times, with each keystroke producing a short single vibration. After ending with a long vibration, your device will disable and prevent most of Xposed's actions, allowing you to easily troubleshoot problematic modules.
Sorted
Outstanding, thanks.
Papalazzzaru said:
I installed thi............. gely appreciated.
PL
Click to expand...
Click to collapse
Device model please?
Caterpillar S50, on Android 4.4.2, baseband version LTE_S0201121.0_S50_0.017.00.
it is compatible with lollipop?
imam88 said:
it is compatible with lollipop?
Click to expand...
Click to collapse
The MX Player part still works. I don't know about the lowest value of brightness in general but at least with CM12 & Samsung the brightness goes to the hardware minimum by default.
Thanks, this is exactly what I want.
Could you make it for LP ?
I want my phone be absolute zero brightness for driving navigation.
Tested it on CM12.1 Nightly on the Nexus 6. It works here, but on 0 the screen is a bit purple. However, I guess this is the screen's fault
Gesendet von meinem Nexus 6 mit Tapatalk
moneytoo said:
The MX Player part still works. I don't know about the lowest value of brightness in general but at least with CM12 & Samsung the brightness goes to the hardware minimum by default.
Click to expand...
Click to collapse
Yes it works
This module seems to be working well on the Moto X Pure Edition (Motorola xt1095) running Lollipop 5.1. It's an AMOLED screen, and I personally find the minimum brightness on 5.1 too bright, so this has helped solve that.
There are a lot of things I want/need to do with the new update. No one is really talking about it, I know a lot of people probably haven't even updated yet. But I figured it would be nice to have a thread where these things can be addressed and updated as we get them done.
Xposed - The big one. Currently gets stuck in bootloop with the Unofficial version of Xposed for 5.1. Bootloop is easily fixed by running xposed-uninstaller in TWRP.
Change Phone DPI - currently working - *Requires Root* Change it how you usually do. Edit build.prop, or use an app like RomToolBox. I find that 264 works well and looks good. @xordos has a comprehensive guide here.
Apps don't auto-start after reboot - Partially fixed - *Requires Root*use a program like TitaniumBackup to install the apps you want to start at boot as a "system app". This will allow them to start after a reboot, but you will need to reconfigure them after you convert them. Do this for apps like Viper, over-clocking apps, and Tasker. Credit to @Iguanadon
3rd Party Launchers not sticking after reboot - Fixed - *Requires Root* All you have to do is freeze the stock launcher. Use a program like TitaniumBackup, find "Huawei Home" and freeze it. Make sure you have Nova or another Launcher installed first!
Battery Percentage in status bar - Until xposed is working there is a neat little app that allows you to have an overlay on your battery icon like this. It's not perfect, but it gets the job done. The app can be found here. Might want to leave accessibility access off, because it pops up a window everytime you plug or unplug the charger. Doesn't seem to start at boot. Could be annoying to launch the app every time you reboot...depends how often you do it.
Lockscreen - Stock one is horrible compared to stock lollipop. It is kind of pretty, but it takes multiple swipes to unlock sometimes, it doesn't show any notifications, its basically wasted space. I would like the stock Lollipop lockscreen. Anyone have any ideas besides the not so great one in the Playstore? I would rather have an official system lockscreen. On jellybean you just had to freeze the Huawei lockscreen. Now if you freeze Huawei Keyguard, the there is no lockscreen at all. Just the screen turns on and you're on your launcher home-screen. I tried finding the lockscreen app on a cm12 device, but it looks like it's built into the systemUI. I am currently using CM Locker. It's pretty nice, has notifications, and doesn't seem to have a delay like most 3rd party lockscreens.
Multitask screen - Again, I would like the stock Lollipop one, also built into the SystemUI. Once we have xposed, there is a pretty nice app here. Then you can assign the multitask button on your nav bar to open that instead. Worked well for me on jellybean.
The carrier text in the status bar - Fixed - Disabled in settings>display>display carrier name (thanks @xordos)
Boost speaker volume and possibly fix audio cut out bug - somewhat fixed - *Requires root* It's really quiet for some reason, considerably quieter than it was on Jellybean....I have had success with Viper4. Make sure you have BusyBox installed, and run it it at least once to install the framework. Then launch Viper4 and do all the stuff it tells you....Install driver, disable LPA, etc. Enable speaker master switch, enable "eXtra-loud" setting at the bottom, and change "Effect Strength" to Extreme. I noticed about a 20-30% volume increase from this. Might need to be launched again after a reboot, or install as system app. As a bonus, this app/driver also seems to fix the terrible audio bug where audio cuts out, and the phone starts lagging. Only 99% sure, but it hasn't happened to me while its active.
Change boot animation - Pretty standard guide I made here. This post includes the stock Lollipop animation.
If anyone has another thing or two they want fixed, I can add it here. If I find any answers I will update as well.
Carrier text, this can be disabled in settings - Display.
xordos said:
Carrier text, this can be disabled in settings - Display.
Click to expand...
Click to collapse
Nice, I was hoping something's would be easy.
Only launcher I have found with transparent navbar is Holo Launcher HD
Code:
[URL="https://play.google.com/store/apps/details?id=com.mobint.hololauncher.hd"]https://play.google.com/store/apps/details?id=com.mobint.hololauncher.hd[/URL]
The app "Browser" doesn't work at screen dpi 264 & 268. I've tried other higher values, however the soft menus at the bottom of the screen are not properly centered.
Is there a way to change app dpi without using xposed?
medwatt said:
The app "Browser" doesn't work at screen dpi 264 & 268. I've tried other higher values, however the soft menus at the bottom of the screen are not properly centered.
Is there a way to change app dpi without using xposed?
Click to expand...
Click to collapse
Nope. You can either keep upping the whole phone DPI little by little, or maybe use a different browser. I haven't noticed any discrepancies yet in my apps with 264.
ArkAngel06 said:
Nope. You can either keep upping the whole phone DPI little by little, or maybe use a different browser. I haven't noticed any discrepancies yet in my apps with 264.
Click to expand...
Click to collapse
Is the "browser" app launching in your phone?
medwatt said:
Is the "browser" app launching in your phone?
Click to expand...
Click to collapse
I'm at 240 dpi and it doesn't open for me.
Sent from my MT2L03 using Tapatalk
tdamocles said:
I'm at 240 dpi and it doesn't open for me.
Sent from my MT2L03 using Tapatalk
Click to expand...
Click to collapse
It opens at dpi 270+ but the soft buttons at the buttom of the screen are not centered!
medwatt said:
Is the "browser" app launching in your phone?
Click to expand...
Click to collapse
No, I just checked, it just crashes. I always freeze that app though.
Added a way to put the percentage in your battery icon in the status bar in the original post.
me 2, i never open the 'browser' till see above post, so I just tried it crash at my 240 dpi. Personally, I am using boat browser.
---------- Post added at 08:08 PM ---------- Previous post was at 08:02 PM ----------
ArkAngel06 said:
Added a way to put the percentage in your battery icon in the status bar in the original post.
Click to expand...
Click to collapse
Just in case you missed, the builtin percentage (settings - battery - show %) is there. But it is not inside the icon though.
xordos said:
Just in case you missed, the builtin percentage (settings - battery - show %) is there. But it is not inside the icon though.
Click to expand...
Click to collapse
Yeah, thanks. A little too big and bulky for me.
Volume Increase
Any way to increase the volume steps so that the audio is louder? I have the volume all the way up and sometimes I can't really hear what I'm listening to unless I hold the speaker to my ear or wear headphones. I was using an xposed module to do this, but until xposed becomes available is there anything that works to increase the volume so its louder? The xposed mod I was using is called Volumesteps+ and can be found at http://repo.xposed.info/module/com.p1ngu1n.volumesteps . any help would be appreciated.
robertbarber said:
Any way to increase the volume steps so that the audio is louder? I have the volume all the way up and sometimes I can't really hear what I'm listening to unless I hold the speaker to my ear or wear headphones. I was using an xposed module to do this, but until xposed becomes available is there anything that works to increase the volume so its louder? The xposed mod I was using is called Volumesteps+ and can be found at http://repo.xposed.info/module/com.p1ngu1n.volumesteps . any help would be appreciated.
Click to expand...
Click to collapse
I'm not sure how to install it on our new update, but I was using Viper4Android before the update. It is capable of making the volume even louder/quieter.
ScoobSTi said:
I'm not sure how to install it on our new update, but I was using Viper4Android before the update. It is capable of making the volume even louder/quieter.
Click to expand...
Click to collapse
I tried it when I had 4.3 and couldn't really tell any difference. I tried it again this morning with not much luck either. It just doesn't seem louder than what normal volume would be. I know its not going to be extremely loud. I just want something that I don't have to hold the phone to my ear to hear what they're saying. Also with viper it hasn't been setup for 5.1 yet only 5.0.
robertbarber said:
Any way to increase the volume steps so that the audio is louder? I have the volume all the way up and sometimes I can't really hear what I'm listening to unless I hold the speaker to my ear or wear headphones. I was using an xposed module to do this, but until xposed becomes available is there anything that works to increase the volume so its louder? The xposed mod I was using is called Volumesteps+ and can be found at http://repo.xposed.info/module/com.p1ngu1n.volumesteps . any help would be appreciated.
Click to expand...
Click to collapse
robertbarber said:
I tried it when I had 4.3 and couldn't really tell any difference. I tried it again this morning with not much luck either. It just doesn't seem louder than what normal volume would be. I know its not going to be extremely loud. I just want something that I don't have to hold the phone to my ear to hear what they're saying. Also with viper it hasn't been setup for 5.1 yet only 5.0.
Click to expand...
Click to collapse
On my nexus 5(which also had a horrible speaker), you could edit the mixer_paths.xml to boost the volume. I tried it on my Mate2, and couldn't really notice a difference.
After installing busybox, the viper4 driver, and disabling the LPA setting it recommends to, I can say Viper makes a noticeable difference for me. Probably about 25-30% louder.
Make sure you Enable the master switch at the top for speaker, and the "eXtra loud" setting at the bottom, and put Effect strength on Extreme.
Edit: Added my method to original post, with links.
Added boot animation guide.
ArcAngel, I have been trying mate 7 themes that were posted in the mate 7 xda forums. They are emui themes. They seem to work except that the fonts don't seem to load. In fact, I haven't been able to detect any font in the sdcard.
medwatt said:
ArcAngel, I have been trying mate 7 themes that were posted in the mate 7 xda forums. They are emui themes. They seem to work except that the fonts don't seem to load. In fact, I haven't been able to detect any font in the sdcard.
Click to expand...
Click to collapse
Do you have a link? I only see one Theme over there for 3.0, but it does look pretty nice.
Also updated original post with all the 3rd party launchers I have found with transparent nav/status bars. There's a lot, but none of the ones I would really like to use. Here's looking at you Nova/Apex. :crying:
I want to reduce my screen brightness to 5%.
How can I do this without using any apps?
I try to reduce brightness from sys/class/..../brightness
It didn't last very long
So plz help me
Confused by your request. Don't you have a Display section in the Settings to control that?
es0tericcha0s said:
Confused by your request. Don't you have a Display section in the Settings to control that?
Click to expand...
Click to collapse
I mean that, my minimum brightness is 20 I want to reduce it to 5
Sounds basically unusable, but different strokes for different folks and all that. What's wrong with using an app method? You might try and adapt this guide http://forum.xda-developers.com/showthread.php?t=1576356 keeping in mind that where the stuff is at might be different depending on the phone and update you're on. Keep in mind you'll probably have issues installing apps at that brightness. Have seen it before when people are using methods to lower the brightness beyond normal - the install button is greyed out.
es0tericcha0s said:
Sounds basically unusable, but different strokes for different folks and all that. What's wrong with using an app method? You might try and adapt this guide http://forum.xda-developers.com/showthread.php?t=1576356 keeping in mind that where the stuff is at might be different depending on the phone and update you're on. Keep in mind you'll probably have issues installing apps at that brightness. Have seen it before when people are using methods to lower the brightness beyond normal - the install button is greyed out.
Click to expand...
Click to collapse
I will give a try. it kinda confusing
Yea, messing with Smali is difficult for beginners and many non beginners. Heh Using an app will make life much easier and much easier to revert settings if needed.
its not working.
I'm in kitkat
files and code r not the same anymore
do u have anythin like this for kitkat?