Revision3 - Verizon Samsung Galaxy Note II

I try installing revision 3 via Odin and I keep getting this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
For whatever reason my VZ Note II seems to only take the root66 rom, anything else stock included just gives me odin errors. Can anyone please help me get this thing going? I would greatly appreciate any and all assistance.

Related

[Q] Odin fail

Phone: Galaxy S 2 HD LTE (120L)
I have error in odin 1.8.2 (in 2 PC) (anyone stock frimware, 2.3.6; 4.0.3; 4.0.4; 4.1.2 )
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> amss.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
File amss.bin don`t flashing. Phone power on in odin mode.
http://forum.xda-developers.com/showthread.php?t=2243231&highlight=odin+failed
http://forum.xda-developers.com/showthread.php?t=2202563&highlight=odin+failed

[Q] Wifi Not Turning On

I recently installed Omega ROM and to my luck the wifi stopped working. I tried the steps they recommended and did exactly what they told me except I used the regular Odin program instead of the mobile. I tried flashing the modems on both the pda and phone section in odin and this is what happened:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help with this? Im so tired of not having wifi..
Flash back to stock and start over doing the directions to the T.
Short answer - just reflash kernel, if it does not help - reflash your ROM and then kernel again. And if this does not help - you can always back to stock with full wipe (backup your data before).

Can't install stock ROMto SM-G550T1

After 1,000's of attempts trying to factory reset my SM-G550T1 using Odin (3.09, 3.10.6, 3.11.1, 3.12.3) to bypass google FRP, I have no results . Please Help!!! :crying:
The cable is original.
Tested it on all USB 2.0 ports.
Used multiple Odin versions.
This is what Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Take a look here
https://youtu.be/COwNLg9phMU
Sent from my SM-A720F using Tapatalk

Error Flashing My A5(6) SM-A510M with odin

well i was flashing my samsung SM-A510M with Odin. here is the message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please help me?, i try flashing like four different stocks rom.
thank you.

cant flash stock rom

usb debugging is disabled the phone is stuck now at samsung logo...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
that is what i get
i have tried various Odin versions
Are you flashing the latest stock ROM?
You confirmed that the model # in download mode matches the firmware you are flashing?
Tried different USB cables and USB ports?

Categories

Resources