well i was flashing my samsung SM-A510M with Odin. here is the message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please help me?, i try flashing like four different stocks rom.
thank you.
Related
I try installing revision 3 via Odin and I keep getting this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
For whatever reason my VZ Note II seems to only take the root66 rom, anything else stock included just gives me odin errors. Can anyone please help me get this thing going? I would greatly appreciate any and all assistance.
Phone: Galaxy S 2 HD LTE (120L)
I have error in odin 1.8.2 (in 2 PC) (anyone stock frimware, 2.3.6; 4.0.3; 4.0.4; 4.1.2 )
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> amss.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
File amss.bin don`t flashing. Phone power on in odin mode.
http://forum.xda-developers.com/showthread.php?t=2243231&highlight=odin+failed
http://forum.xda-developers.com/showthread.php?t=2202563&highlight=odin+failed
After 1,000's of attempts trying to factory reset my SM-G550T1 using Odin (3.09, 3.10.6, 3.11.1, 3.12.3) to bypass google FRP, I have no results . Please Help!!! :crying:
The cable is original.
Tested it on all USB 2.0 ports.
Used multiple Odin versions.
This is what Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Take a look here
https://youtu.be/COwNLg9phMU
Sent from my SM-A720F using Tapatalk
Hello,
yesterday i decided to install a new custom rom. Had Note 7 ROM running for a half year.
At first i updated TWRP, after that my touchpad is not working correctly.(also in TWRP) I have to click 1 inch above the buttons to hit them...
So after a few tries to get a new ROM running(tried a few), finally one worked, but the problem with the touchscreen was still there. After that, i decided to install the stock firmware. Downloaded it from SAMMobile, but even that i can't install in Odin.
I already tried to wipe the complete phone with twrp and tried it with Pit file, but i get still the same error in Odin.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help?
usb debugging is disabled the phone is stuck now at samsung logo...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
that is what i get
i have tried various Odin versions
Are you flashing the latest stock ROM?
You confirmed that the model # in download mode matches the firmware you are flashing?
Tried different USB cables and USB ports?