Hello,
yesterday i decided to install a new custom rom. Had Note 7 ROM running for a half year.
At first i updated TWRP, after that my touchpad is not working correctly.(also in TWRP) I have to click 1 inch above the buttons to hit them...
So after a few tries to get a new ROM running(tried a few), finally one worked, but the problem with the touchscreen was still there. After that, i decided to install the stock firmware. Downloaded it from SAMMobile, but even that i can't install in Odin.
I already tried to wipe the complete phone with twrp and tried it with Pit file, but i get still the same error in Odin.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help?
Related
I try installing revision 3 via Odin and I keep getting this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
For whatever reason my VZ Note II seems to only take the root66 rom, anything else stock included just gives me odin errors. Can anyone please help me get this thing going? I would greatly appreciate any and all assistance.
Phone: Galaxy S 2 HD LTE (120L)
I have error in odin 1.8.2 (in 2 PC) (anyone stock frimware, 2.3.6; 4.0.3; 4.0.4; 4.1.2 )
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> amss.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
File amss.bin don`t flashing. Phone power on in odin mode.
http://forum.xda-developers.com/showthread.php?t=2243231&highlight=odin+failed
http://forum.xda-developers.com/showthread.php?t=2202563&highlight=odin+failed
Guys I need some help ! Recently I tried to root my S6 Edge following a tutorial on internet but the thing is I got stuck in a loop.
At the first time it was stuck on the Samsung logo and saying on the upper left corner with red "RECOVERY IS NOT SEANDROID ENFORCING" . Then I read somewhere else that I need to flash with Odin its stock firmware and I got the stock firmware for its model ( SM-G925F from Germany ) and when I'm flashing the stock firmware I get this problem:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'll post a screenshot as soon as I do 10 posts.
I accidentally clean wiped everything on my Samsung Galaxy J3 Emerge (Boost Mobile) (SM-J327P) with twrp. I decided to flash the stock rom and whenever I try an official stock rom I get FAIL! (Auth). Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
[1]eMMC write fail: ABOOT
I have tried multiple official stock roms. Thanks for any help. If someone has the latest official boost mobile stock rom please put it in the reply because I am not completely sure I'm using the latest versions.
well i was flashing my samsung SM-A510M with Odin. here is the message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please help me?, i try flashing like four different stocks rom.
thank you.