Guys I need some help ! Recently I tried to root my S6 Edge following a tutorial on internet but the thing is I got stuck in a loop.
At the first time it was stuck on the Samsung logo and saying on the upper left corner with red "RECOVERY IS NOT SEANDROID ENFORCING" . Then I read somewhere else that I need to flash with Odin its stock firmware and I got the stock firmware for its model ( SM-G925F from Germany ) and when I'm flashing the stock firmware I get this problem:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'll post a screenshot as soon as I do 10 posts.
Related
phone note 4..
gearfit was on BOA2 was trying to just reflash BOA2.
my gear fit rebooted in the middle of the odin update .. so now.. it is bucked withe the yellow triangle. i turned it off for 6 hours and it still shows the triangle. and when i try to use kies.. recovery and i type in my model number SM-R350 and my serial number.. KIES tells me that it can not find SM-R350 devices i am using the latest version from samsung site.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.0905)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> font.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I accidentally clean wiped everything on my Samsung Galaxy J3 Emerge (Boost Mobile) (SM-J327P) with twrp. I decided to flash the stock rom and whenever I try an official stock rom I get FAIL! (Auth). Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
[1]eMMC write fail: ABOOT
I have tried multiple official stock roms. Thanks for any help. If someone has the latest official boost mobile stock rom please put it in the reply because I am not completely sure I'm using the latest versions.
well i was flashing my samsung SM-A510M with Odin. here is the message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please help me?, i try flashing like four different stocks rom.
thank you.
Hello,
yesterday i decided to install a new custom rom. Had Note 7 ROM running for a half year.
At first i updated TWRP, after that my touchpad is not working correctly.(also in TWRP) I have to click 1 inch above the buttons to hit them...
So after a few tries to get a new ROM running(tried a few), finally one worked, but the problem with the touchscreen was still there. After that, i decided to install the stock firmware. Downloaded it from SAMMobile, but even that i can't install in Odin.
I already tried to wipe the complete phone with twrp and tried it with Pit file, but i get still the same error in Odin.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help?
usb debugging is disabled the phone is stuck now at samsung logo...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
that is what i get
i have tried various Odin versions
Are you flashing the latest stock ROM?
You confirmed that the model # in download mode matches the firmware you are flashing?
Tried different USB cables and USB ports?