phone note 4..
gearfit was on BOA2 was trying to just reflash BOA2.
my gear fit rebooted in the middle of the odin update .. so now.. it is bucked withe the yellow triangle. i turned it off for 6 hours and it still shows the triangle. and when i try to use kies.. recovery and i type in my model number SM-R350 and my serial number.. KIES tells me that it can not find SM-R350 devices i am using the latest version from samsung site.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.0905)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> font.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
I guess there is a first time for everything.
I can not boot into recovery and I get the message 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I do not have Kies installed and nothing samsung is running.
I have tried multiple cables, usb ports, and downloads of SCH-I545_MDK_562219_Stock_Restore.tar.md5
*Edit* I just had a thought, is this happening because I am trying to go back to the stock rom I.E. before any Verizon firmware updates?
The phone says in red Start [224, 1440]
SW REV. CHECK FAIL : fused : 3, binary : 1
Here is the Odin Log
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be appreciated. Thank you
Guess my phone was ME7 not MDK, hence why it wouldn't flash. I've got it flashed with an ME7 rom now and I think all is well. Thanks again.
Guys I need some help ! Recently I tried to root my S6 Edge following a tutorial on internet but the thing is I got stuck in a loop.
At the first time it was stuck on the Samsung logo and saying on the upper left corner with red "RECOVERY IS NOT SEANDROID ENFORCING" . Then I read somewhere else that I need to flash with Odin its stock firmware and I got the stock firmware for its model ( SM-G925F from Germany ) and when I'm flashing the stock firmware I get this problem:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'll post a screenshot as soon as I do 10 posts.
After 1,000's of attempts trying to factory reset my SM-G550T1 using Odin (3.09, 3.10.6, 3.11.1, 3.12.3) to bypass google FRP, I have no results . Please Help!!! :crying:
The cable is original.
Tested it on all USB 2.0 ports.
Used multiple Odin versions.
This is what Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Take a look here
https://youtu.be/COwNLg9phMU
Sent from my SM-A720F using Tapatalk
I accidentally clean wiped everything on my Samsung Galaxy J3 Emerge (Boost Mobile) (SM-J327P) with twrp. I decided to flash the stock rom and whenever I try an official stock rom I get FAIL! (Auth). Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
[1]eMMC write fail: ABOOT
I have tried multiple official stock roms. Thanks for any help. If someone has the latest official boost mobile stock rom please put it in the reply because I am not completely sure I'm using the latest versions.
usb debugging is disabled the phone is stuck now at samsung logo...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
that is what i get
i have tried various Odin versions
Are you flashing the latest stock ROM?
You confirmed that the model # in download mode matches the firmware you are flashing?
Tried different USB cables and USB ports?