After 1,000's of attempts trying to factory reset my SM-G550T1 using Odin (3.09, 3.10.6, 3.11.1, 3.12.3) to bypass google FRP, I have no results . Please Help!!! :crying:
The cable is original.
Tested it on all USB 2.0 ports.
Used multiple Odin versions.
This is what Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Take a look here
https://youtu.be/COwNLg9phMU
Sent from my SM-A720F using Tapatalk
Related
I try installing revision 3 via Odin and I keep getting this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
For whatever reason my VZ Note II seems to only take the root66 rom, anything else stock included just gives me odin errors. Can anyone please help me get this thing going? I would greatly appreciate any and all assistance.
Phone: Galaxy S 2 HD LTE (120L)
I have error in odin 1.8.2 (in 2 PC) (anyone stock frimware, 2.3.6; 4.0.3; 4.0.4; 4.1.2 )
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> amss.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
File amss.bin don`t flashing. Phone power on in odin mode.
http://forum.xda-developers.com/showthread.php?t=2243231&highlight=odin+failed
http://forum.xda-developers.com/showthread.php?t=2202563&highlight=odin+failed
I accidentally clean wiped everything on my Samsung Galaxy J3 Emerge (Boost Mobile) (SM-J327P) with twrp. I decided to flash the stock rom and whenever I try an official stock rom I get FAIL! (Auth). Odin says:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2
[1]eMMC write fail: ABOOT
I have tried multiple official stock roms. Thanks for any help. If someone has the latest official boost mobile stock rom please put it in the reply because I am not completely sure I'm using the latest versions.
well i was flashing my samsung SM-A510M with Odin. here is the message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please help me?, i try flashing like four different stocks rom.
thank you.
usb debugging is disabled the phone is stuck now at samsung logo...
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
that is what i get
i have tried various Odin versions
Are you flashing the latest stock ROM?
You confirmed that the model # in download mode matches the firmware you are flashing?
Tried different USB cables and USB ports?