Related
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
postfatal said:
First, your luck isn't very bad, computers don't have luck, if you've bricked your device it's because you've messed something up not because you're unlucky.
Second, what exactly did you do to flash your phone? You haven't given anywhere near enough information for anyone to help you hence the lack of replies.
Click to expand...
Click to collapse
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
djjandy said:
Thank you very much. U are right, I bricked my phone by my careless. I was restoring my phone to a previous system,then it got stuck in the recovery. I waited for a long time finally I have to take out the battery. Then it bricked.
Click to expand...
Click to collapse
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Brian_SGW_CM9 said:
Omg that really happens? I am using Samsung galaxy wonder. Does that happen to many of you guys?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
1 tip
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
djjandy said:
My luck is very bad. I failed to flash my 9100, and now I can not turn on my phone. No matter I press on which keys, the screen keeps black. And I connect it to my computer bu it can not be detected. I have tried the Counter Reset Patch to go to downloading mode, but failed. So what should I do now? If I sent it back to Samsung Service , how much will they charge me? Or If I can fix it by myself ? Who can help me? Thanks very much..
Click to expand...
Click to collapse
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
djjandy said:
As far as I know I am the first. U know under almost all conditions u can fix it by downloading mode , but now I can not enter that mode. So I am unlucky.
Click to expand...
Click to collapse
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
You can bring it back to life
Flash it with official firmware that's
It !!
Official Samsung firmwares :-
www.samfirmware.com
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
badboys8908 said:
What did you actually flash? Firmware, Kernel or are you trying to Root your phone?
If you can go to Download Mode then flash Stock Firmware. To be safe, charge battery to at least 70% before flashing via Odin3 v1.85. Provide more details so it would be easier for others to help....cheers
Click to expand...
Click to collapse
Exactly I flash a new rom, but the rom is not good then I tried to restore my previous rom which I backed up before. While restoring, it stuck. I took out the battery. I can not enter downloading mode now so it is a big problem.
danishprakash said:
You can bring it back to life
Flash it with official firmware that's
It !!
Sent from my Samsung Wave GT-S8500 (ICS 4.0.4) using xda premium
Click to expand...
Click to collapse
Thank you very much, But I can not enter downloading mode now.:crying:
Anindya JV said:
Try charging the battery using another mobile or external battery charger.Then connect. By my experience usb drivers of android dont easily get damaged or lost until u ruin the rom heart and soul.
Click to expand...
Click to collapse
I have charged the battery to full by external charger. I think I ruin the heart.:crying:
Brian_SGW_CM9 said:
My friend told me he couldn't turn on too. He said he was flashing a custom rom with cwm. He uses s2 . He had the same situation as u did
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
What did he do then? Does he fix it ?
djjandy said:
What did he do then? Does he fix it ?
Click to expand...
Click to collapse
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
USB Jig will not get you into download mode either?
Warning:If you flash any ROM built on the leaked Samsung 4.0.4 ROM don't use recovery
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Brian_SGW_CM9 said:
He said: everything's fine again. I can ask him for help if u want. I will answer u tomorrow
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much.
rapatu2010 said:
:crying: I hope you did not flash a ROM based on the leaked Samsung 4.0.4 and attempt recovery. If that is what you did then your phone is really bricked!!
Click to expand...
Click to collapse
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
djjandy said:
That is what I did. The last method is sent it back to Samsung ? How much should I pay for it?
Click to expand...
Click to collapse
Did you just flash the "Leaked - 4.0.4 I9100XXLQ5..???
If Yes then the only solution is Samsung Service Centre.
Read this:
http://forum.xda-developers.com/showthread.php?t=1756242
This leaked firmware had cause a lots of Hard Brick to other user not only you.
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash the rom again with Odin.
Sent from my Nexus 7 using xda premium
Correct s3 ???
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash again - but be 100% certain the ROM you are using is for the precise version of S3 that you have!
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
JJEgan said:
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
Click to expand...
Click to collapse
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
kofiaa said:
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Unfortunately after trying a method that we know nothing about that is often copied from XDA but missing vital facts .
jje
source of the problem found
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
Does not happen if you read and understand first .
jje
nope .. its still not working..
khairulpetrcech said:
nope .. its still not working..
Click to expand...
Click to collapse
Looks like a paid for repair .
But first just try flashing stock firmware via Odin .
jje
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
chris151722 said:
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
Click to expand...
Click to collapse
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
khairulpetrcech said:
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
Click to expand...
Click to collapse
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
your awesome !
chris151722 said:
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
Click to expand...
Click to collapse
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
khairulpetrcech said:
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
Click to expand...
Click to collapse
:good: glad i have help you out..
chris151722 said:
:good: glad i have help you out..
Click to expand...
Click to collapse
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
khairulpetrcech said:
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
Click to expand...
Click to collapse
Yes within the 2years warranty period..
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
khairulpetrcech said:
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yes try the kies method first before sending for repair.
but i dont think it will solve by kies update if you got the brick by flashing wrong cfautoroot.
maybe if you got the brick from flashing rom maybe it can be fix,
---------- Post added at 07:15 PM ---------- Previous post was at 07:08 PM ----------
t3chjunkie said:
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
Click to expand...
Click to collapse
you dont have warranty on your phone? if you have, you dont have to pay for service repair for it in claiming warranty.
i updated my galaxy S2 i9100 to official ics rom than rooted it via odin , than flashed a custom kernel and successfully entered to the clockwork mod then wiped data and my screen went black and my phone is dead :crying: .. . .
i tried to go to download mode and recovery but no response from the device the computer cant seems find the device while connected to the PC .. no response from the device when connected to the charger
is there i can do to turn this piece of plastic to a phone again except changing the mother board . .
shohag_prince said:
i updated my galaxy S2 i9100 to official ics rom than rooted it via odin , than flashed a custom kernel and successfully entered to the clockwork mod then wiped data and my screen went black and my phone is dead :crying: .. . .
i tried to go to download mode and recovery but no response from the device the computer cant seems find the device while connected to the PC .. no response from the device when connected to the charger
is there i can do to turn this piece of plastic to a phone again except changing the mother board . .
Click to expand...
Click to collapse
ICS 4.0.4?If so,then it's EMMC brick bug.
GamingDj said:
ICS 4.0.4?If so,then it's EMMC brick bug.
Click to expand...
Click to collapse
can it be fixed bro??? @GamingDj
I hope for your sake this is not the case.....but it sounds like another case of ics brickbug......
Can you tell us which kernel you flashed (provide a link if you can) and what (odin) method you used to root.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
keithross39 said:
I hope for your sake this is not the case.....but it sounds like another case of ics brickbug......
Can you tell us which kernel you flashed (provide a link if you can) and what (odin) method you used to root.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
i did this to my device almost 2 week ago and upgraded my HDD so unfortunately i don't have the back up and can't remember the kernel version or which file i used to root it
maybe luck is not on my side after all ... .
Ok....to recap......
Can you enter recovery mode?
Can you enter download mode?
Do you get the battery icon on the screen when you plug the charger in?
Does the area below the main camera get warm when you attempt to charge?
If your answers are 'no', 'no', 'no' and yes.....then more than likely it IS brickbug.......
Which brings me to my next question.......
Ignoring the fact that you rooted (this is now undetectable) are you under warranty?
Samsung are aware that *some* of their phones will fail if a wipe or kies update is performed on them. So as long as you tell them........
'I tried to update with kies and then the phone switched off and wouldn't switch on again'
then they *should* repair the phone under warranty.
Just DON'T mention XDA or rooting or odin or brickbug......or anything else like that and you should be ok.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Had the same problem with my old s2.The phone doesn't boot into recovery or download mode if the battery is dead,Make sure the battery is alright and try again.I had to replace my battery.
If all is well,then its EMMC brick.
Service centre.
keithross39 said:
Ok....to recap......
Can you enter recovery mode?
Can you enter download mode?
Do you get the battery icon on the screen when you plug the charger in?
Does the area below the main camera get warm when you attempt to charge?
If your answers are 'no', 'no', 'no' and yes.....then more than likely it IS brickbug.......
Which brings me to my next question.......
Ignoring the fact that you rooted (this is now undetectable) are you under warranty?
Samsung are aware that *some* of their phones will fail if a wipe or kies update is performed on them. So as long as you tell them........
'I tried to update with kies and then the phone switched off and wouldn't switch on again'
then they *should* repair the phone under warranty.
Just DON'T mention XDA or rooting or odin or brickbug......or anything else like that and you should be ok.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
the answer is "no","no","no' and "yes" and unfortunately i am out of warranty so should i assume the motherboard is permanently
dead ?? @keithross39 and tnx for answering
vish91 said:
Had the same problem with my old s2.The phone doesn't boot into recovery or download mode if the battery is dead,Make sure the battery is alright and try again.I had to replace my battery.
If all is well,then its EMMC brick.
Click to expand...
Click to collapse
after you replaced ur battery ware u able to go to download mode despite of the EMMC brick ether way i m going to change the battery and see if it works. . . thnx for replying ... @vish91
MistahBungle said:
Service centre.
Click to expand...
Click to collapse
unfortunately may be yes . . . :crying:
shohag_prince said:
the answer is "no","no","no' and "yes" and unfortunately i am out of warranty so should i assume the motherboard is permanently
dead ?? @keithross39 and tnx for answering
Click to expand...
Click to collapse
If it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Painful mistake. Hate reading threads like this.
keithross39 said:
if it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
sent from my rooted, de bloated, stock jb powered s2 via philz kernel and xda developers app
Click to expand...
Click to collapse
. .. . .
andrewwright said:
Painful mistake. Hate reading threads like this.
Click to expand...
Click to collapse
Painful indeed . . .. . .. .
was there anything i could have done to prevent this .. . ????
From what I can tell 4.0.4 was the problem. Soon as you factory reset the phone dies. Sam knows about this that makes it even worst. Sorry to hear about your dead s2
keithross39 said:
If it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
was there any thing i could have done to prevent this bro .. . . .????
Stay well away from 4.0.4 firmware and factory reset. Even with a custom kernel I think is a bad move to stay on it.
andrewwright said:
From what I can tell 4.0.4 was the problem. Soon as you factory reset the phone dies. Sam knows about this that makes it even worst. Sorry to hear about your dead s2
Click to expand...
Click to collapse
at least its good to know that its not my fault . . .. tnx bro. . .:good:
Some will say its your fault for not reading. Not me this is a dirty samsung problem and they should of recalled ALL the faulty handset's as I think they are faulty and pull the 4.0.4 from every were. Can I ask were did you get that firmware from?
hello there ... i did something stupid .. and i need help .. i rooted my tmobile s3 using Mr.Robinson method 2 days ago and then decided two flash a custom rom .. i chose the slim bean 4.3.1 build 2.2 .. the only dumb stupid thing i did was downloading the international version zip instead of the tmobile one ... i flashed and the phone died after that ... can some help .. please
frozensama said:
hello there ... i did something stupid .. and i need help .. i rooted my tmobile s3 using Mr.Robinson method 2 days ago and then decided two flash a custom rom .. i chose the slim bean 4.3.1 build 2.2 .. the only dumb stupid thing i did was downloading the international version zip instead of the tmobile one ... i flashed and the phone died after that ... can some help .. please
Click to expand...
Click to collapse
Flash back to stock first. See if can.
Sent from my GT-I9300 using xda app-developers app
Wrong forum, hence why you may have bricked your phone. As above try flashing the correct stock rom, else ask in the right forum.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Wrong forum, hence why you may have bricked your phone. As above try flashing the correct stock rom, else ask in the right forum.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Well he is kinda new.
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Well he is kinda new.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
A phone is bricked be the user new or not .
If they want to start flashing without reading and double checking then its likely a problem .
As said usual per this scene flashed wrong firmware on a totally different hardware is not usual recoverable . Blown digitizer blown motherboard all probables .
JellyYogurt said:
Flash back to stock first. See if can.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
the phone id dead .. i cant get it to go to download mode ..
anyway i talked to some guy and he is gonna try a jtag on it ..
thanks
well
boomboomer said:
Wrong forum, hence why you may have bricked your phone. As above try flashing the correct stock rom, else ask in the right forum.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
sorry about the wrong form .. i just couldn't find the right form .. and yes sir i m new
and im a doctor ..so basically i know nothing about your world as much as you know nothing about mine ..
thank you for the help .. i rooted my phone before and i flashed a lot of roms ... it just this one went wrong due to a stupid mistake ..
frozensama said:
sorry about the wrong form .. i just couldn't find the right form .. and yes sir i m new
and im a doctor ..so basically i know nothing about your world as much as you know nothing about mine ..
thank you for the help .. i rooted my phone before and i flashed a lot of roms ... it just this one went wrong due to a stupid mistake ..
Click to expand...
Click to collapse
Just like the Doctor then errors happen .
PS some of do know quite a lot about your world .
JellyYogurt said:
Well he is kinda new.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
i flashed the international version of slim bean 4.3.1 on the t mobile version .. that was originally the problem
the phone didnt respond after that .. couldn't enter download mode .. couldn't go to recovery and couldn't boot the phone ..
now there is this website brickedmyphone.com .. that promised to help and thank you all
frozensama said:
sorry about the wrong form .. i just couldn't find the right form .. and yes sir im new
and im a doctor ..so basically i know nothing about your world as much as you know nothing about mine ..
thank you for the help .. i rooted my phone before and i flashed a lot of roms ... it just this one went wrong due to a stupid mistake ..
Click to expand...
Click to collapse
How do you know I'm not also a doctor? Kind of annoying when people make assumptions based on no evidence. I didn't judge you -just pointed out the likely cause and effect, your phone's 'diagnosis' if you prefer.
boomboomer said:
How do you know I'm not also a doctor? Kind of annoying when people make assumptions based on no evidence. I didn't judge you -just pointed out the likely cause and effect, your phone's 'diagnosis' if you prefer.
Click to expand...
Click to collapse
He nvr said u aren't a doctor though
Sent from my GT-I9300.
Give a thank if i helped you.