I am using xperia neo(MT15i)
i rooted it and i'd like to run jellybean for it..
i used ics kernel to root..
how to install jellybean?
will i have to install jb kernel and stuff??
please help me out thanks
you need to flash jb roms..like CM10, MIUI4..etc..and the rom's installation instructions will be in their resp threads..
list of JB roms here http://forum.xda-developers.com/showthread.php?t=1316394 but things like HDMI wont work..and a few other bugs..but check em out!
Happy Flashing!!!
Abhishek Bhat said:
I am using xperia neo(MT15i)
i rooted it and i'd like to run jellybean for it..
i used ics kernel to root..
how to install jellybean?
will i have to install jb kernel and stuff??
please help me out thanks
Click to expand...
Click to collapse
I believe you have the BOOTLOADER unlocked.
Otherwise bootloops or you might end up in briking your precious mobile
Read THIS to get some lights of BOOTLOADER unlocking
To use JellyBean Rom, you have to flash JB kernel.. and if your's is BL locked you shld not try flashing the a different ROM kernel.
Only Stock based (ICS in your case) Custom ROMs can be flashed.
:silly:Happy Flashing and enjoy Custom MODS and ROMS in XDA as i DO :silly:
NEO V | PAC MAN 18
Hit Thanks if my words lightened you hair :highfive:
Abhishek Bhat said:
I am using xperia neo(MT15i)
i rooted it and i'd like to run jellybean for it..
i used ics kernel to root..
how to install jellybean?
will i have to install jb kernel and stuff??
please help me out thanks
Click to expand...
Click to collapse
do searching,googling & reading...
you can try Paranoid Android JB rom. find it in the Neo development thread. there is an instruction on how to install the rom in the thread itself.
Follow the Instruction provided in Custom ROM thread in Neo/Neo V Development section
Related
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
iamdchosen1 said:
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
Click to expand...
Click to collapse
Flash generic global .42 (comes with correct kernal) root it then OTA update to 62 install cwm then go from their do wat you want
But since I have an unlocked bootloader, do you think I would be able to update OTA?
Won't it brick the phone?
Sent from my MT11i using xda premium
mine brick while update through OTA.i have to relock BL with s1tool...
So what should I do?
Should I flash the 0.62 ftf file using flashtool directly and then root it with the Doomlord's kit?
Or any other suggestions???
Raazax8 said:
Flash generic global .42 (comes with correct kernal) root it then OTA update to 62 install cwm then go from their do wat you want
Click to expand...
Click to collapse
He's on unlocked bootloader, why messing with ota's..
@OP: if you wanna jump straight to some custom rom: flash .62 .ftf, and flash any custom kernel advised by rom creator.
Its same as you did with ics, first stock .ftf then kernel, then rom.
Hey man. If you previously were using the latest ICS Sony ROM before hopping to a custom ROM, then simply flash the kernel of that Custom GB ROM, wipe everything and flash as usual. You are good to go. There is no need to downgrade so long as you're on latest.
Sources: Experience
Madfysh said:
He's on unlocked bootloader, why messing with ota's..
.
Click to expand...
Click to collapse
I only tell it the way i know. mine is locked bootloader so i follow pandemics guide and that is rooting 42 OTA to 62 then install cwm.
thats only way i know n i am only trying to help someone with the little knowledge i do have )
iamdchosen1 said:
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
Click to expand...
Click to collapse
just flash gb .62 firmware & GB Kernel through flashtool
Flashtool
http://forum.xda-developers.com/showthread.php?t=1351317
GB Firmware
http://forum.xda-developers.com/showthread.php?t=1258723
Custom Rom
http://forum.xda-developers.com/showthread.php?t=1316394
Helpful thread
http://forum.xda-developers.com/showthread.php?t=1757256
Hit thanks to respective thread creater they are our real helper
iamdchosen1 said:
I am currently on a custom ICS ROM.. And I want to try some GB ROMs too.. So what should I do?
Should I first flash the GB's stock ROM? If yes, then with which kernel?
Xperia Neo V..
Unlocked Bootloader..
Xperia Pureness (Build 3).. by Thilnac
Click to expand...
Click to collapse
GB rom are good so if you want them simply flash the rom with cwm and flash the kernel using flashtool
i have xperia sola android version 2.3.7 , kernal version 2.6.35.7+ and build number 6.0.B.1.564 i was trying to install PURE BLOOD ROM v1.0 - The Ultimate Stock Xperience(ics)
and according to tutorial
i installed rom via CMW v5
but when i restarted the phone
it stuck on the sony logo and keep restarting
i restored the earlier ROM which i backup-ed.
i Want to install that stocked based custom rom how to install please clarify me
i tried many times but unable to install that rom...
That rom is based on ics not gb my friend
First flash ics. Then use that rom
drsanket_xperia_u said:
That rom is based on ics not gb my friend
First flash ics. Then use that rom
Click to expand...
Click to collapse
you mean first i have to flash with official stock rom or what??Plz tell me..
You need the ICS stock rom first to get the kernel.
Look for the global ICS file in the forums. It's on a torrent.
nishangrg said:
you mean first i have to flash with official stock rom or what??Plz tell me..
Click to expand...
Click to collapse
Yes u should read that rom is based on 6.1 not 6.0 (gb)
So if u want that rom just flash 6.1.b.1.10 and then flash the pure blood rom as per instructions
After installing pureblood ROM via CWM,switch off the phone and then flash .54 Kernel through flashtool by putting in fastboot mode.No need for installing stock ics.I can provide you the kernel file,if you need.
waht is best between Ultimate sola and pure blood?
ultimate saola is v1, it's mean that pure blood v2 is most recent?
akp.ajinkya said:
After installing pureblood ROM via CWM,switch off the phone and then flash .54 Kernel through flashtool by putting in fastboot mode.No need for installing stock ics.I can provide you the kernel file,if you need.
Click to expand...
Click to collapse
plz provide me the link i want to try..
drsanket_xperia_u said:
Yes u should read that rom is based on 6.1 not 6.0 (gb)
So if u want that rom just flash 6.1.b.1.10 and then flash the pure blood rom as per instructions
Click to expand...
Click to collapse
so you mean i should flash 1st ICS Stock Firmware which is in the extension .ftf through flashtool? right?
and Plz if i had to flash ICS stock Firmware.ftf file through flashtool then plz give me a tutorial to flash
i want to flash ICS on my xperia sola.. i want to upgrade my GB to ICS with Custom rom....
akp.ajinkya said:
After installing pureblood ROM via CWM,switch off the phone and then flash .54 Kernel through flashtool by putting in fastboot mode.No need for installing stock ics.I can provide you the kernel file,if you need.
Click to expand...
Click to collapse
They are different ROMs. One is stock lite (All bloat removed). The other is stock enhanced.
Check the thread to see which is which.
Snowstormzzz said:
They are different ROMs. One is stock lite (All bloat removed). The other is stock enhanced.
Check the thread to see which is which.
Click to expand...
Click to collapse
Yups,I know the difference,i have used both of them.Also pureblood s .54 based and ultimate sola is .10 based.
---------- Post added at 06:22 PM ---------- Previous post was at 06:17 PM ----------
nishangrg said:
plz provide me the link i want to try..
Click to expand...
Click to collapse
Here's the link:https://www.box.com/s/o6i2gh5hymxxgiohh8im
Hi people
I have flashed cm10 to my xperia acros recently and i want to downgrade to stock ICS SO,PLEZZZZZ HELP
please can any one answer me how i can downgrade from cm10 JB 4.1 to ICS on xperia acro s
Flash stock ROM
dastin1015 said:
Flash stock ROM
Click to expand...
Click to collapse
thank u for answering me but i have another question
how i can flsh the stock kernel becaus with cm10 i have coustome kernel?
Hi I want to install SlimCM Custom ICS Based rom to my new xperia U but not sure about the procedure [have read the guide but still confused] I've downloaded the rom and 2 kernels : ( vengence / SlidingXU ) but not sure which one will work with this rom.... Right now I'm on stock rom and kernel on android 2.3 gingerbread.... but I successfully unlocked my bootloader ... can someone step by step guide me as I don't have any roote access nor recovery installed right now in my phone...
Thanks in advance...
orangzeb said:
Hi I want to install SlimCM Custom ICS Based rom to my new xperia U but not sure about the procedure [have read the guide but still confused] I've downloaded the rom and 2 kernels : ( vengence / SlidingXU ) but not sure which one will work with this rom.... Right now I'm on stock rom and kernel on android 2.3 gingerbread.... but I successfully unlocked my bootloader ... can someone step by step guide me as I don't have any roote access nor recovery installed right now in my phone...
Thanks in advance...
Click to expand...
Click to collapse
i think you need to root your phone first,install cwm,then flash stock ICS ROM,after that then flash SlimCM rom.
what about kernel ?? do I need to install it in the end and what kernels work best with SlimCM ? won't I loose root when I flash stock ICS Rom ?
orangzeb said:
what about kernel ?? do I need to install it in the end and what kernels work best with SlimCM ? won't I loose root when I flash stock ICS Rom ?
Click to expand...
Click to collapse
erm...now you on GB right?
download stock ICS ftf,flash it,then root,install cwm
follow the instructions to install
http://forum.xda-developers.com/showthread.php?t=2143750
orangzeb said:
what about kernel ?? do I need to install it in the end and what kernels work best with SlimCM ? won't I loose root when I flash stock ICS Rom ?
Click to expand...
Click to collapse
Use fast boot and flash sliding xu kernel. Actually I recommend transcendence kernel. Flash that, reboot into recovery, copy ROM zip to storage. Wipe data, cache, dalvik and system and then flash slim cm zip
Sent from my Xperia U using xda app-developers app
Hey guys,
I'm at stock rom (latest Italian ics)
and want to flash custom rom and kernal with CWM, offcorse with root and unlock bootloader
all at once
I guess I can make it easy like the kernel with CWM and root with rom,,, something like that :-/
please if it possible give me steps and links with each step
and with links to overclocked kernel and good custom ics rom
Forgive me, I know they are all prediscussed before, but in separate ways which is too hard for me :-S
I'm a Xperia U user
dr_hakam2 said:
Hey guys,
I'm at stock rom (latest Italian ics)
and want to flash custom rom and kernal with CWM, offcorse with root and unlock bootloader
all at once
I guess I can make it easy like the kernel with CWM and root with rom,,, something like that :-/
please if it possible give me steps and links with each step
and with links to overclocked kernel and good custom ics rom
Forgive me, I know they are all prediscussed before, but in separate ways which is too hard for me :-S
Click to expand...
Click to collapse
This is the best Tutorial for a Noob follow this::
http://forum.xda-developers.com/showthread.php?t=2100529
Here is the link to root and cwm in a simple way.
http://forum.xda-developers.com/showthread.php?t=2244015
After getting root and cwm flash jb rom if u want
You better try unofficial Jelly Bean rom.. this is very speedy compared to ics rom and having new features..
Bugs in this rom was Front camera wont work developers are trying to fix it and illumination wont work like ics
Here is the link for JB For Our Xperia U
http://forum.xda-developers.com/showthread.php?t=2284394
overclocked kernel for Stock jellybean
http://forum.xda-developers.com/showthread.php?t=2307423
If someone helps you press THANKS and by pressing it wont hurt you
sonyfan45 said:
This is the best Tutorial for a Noob follow this::
http://forum.xda-developers.com/showthread.php?t=2100529
Here is the link to root and cwm in a simple way.
http://forum.xda-developers.com/showthread.php?t=2244015
After getting root and cwm flash jb rom if u want
You better try unofficial Jelly Bean rom.. this is very speedy compared to ics rom and having new features..
Bugs in this rom was Front camera wont work developers are trying to fix it and illumination wont work like ics
Here is the link for JB For Our Xperia U
http://forum.xda-developers.com/showthread.php?t=2284394
overclocked kernel for Stock jellybean
http://forum.xda-developers.com/showthread.php?t=2307423
If someone helps you press THANKS and by pressing it wont hurt you
Click to expand...
Click to collapse
thanks man, I already got help
I guess the best way
1- unlock BL
2- Kernel + CM
3- Rom + root