Very simple little zip attached to just block ads on your HTC DNA in recovery. Just flash in recovery and enjoy your adless DNA
Awesome. Very useful since Adblock won't work.
I use adfree and it works. It just doesn't stick after reboots.
asenduk said:
I use adfree and it works. It just doesn't stick after reboots.
Click to expand...
Click to collapse
And it won't until we have s off
sent from time out
I really appreciate all of the flashable zips made for us. What I did, however, is use *insert your favorite ad blocker* to update the hosts file. Then, before rebooting the phone I made a copy of that file. Using AromaFM in recovery I replaced the hosts file with the copy I made. Reboot and good to go. Downside, of course, is that you can muck something up. Upside is that you can more quickly change your host file without waiting for some kind soul to zip up a change for us.
ianPhillips1 said:
And it won't until we have s off
sent from time out
Click to expand...
Click to collapse
Or until you install dsb's latest kernal ,writing to system is now fixed
sent from time out
ianPhillips1 said:
Or until you install dsb's latest kernal ,writing to system is now fixed
sent from time out
Click to expand...
Click to collapse
There is that! +1
If not going to that kernel... whatever ad blocker you use...update the hosts file...pull it using ADB with phone on...reboot to recovery...mount system...push hosts..adb shell use chmod 755 reboot and done! I would do this everytime AdAway told me there was an updated hosts file.
Gets you comfortable with ADB commands, too, which is never a bad thing!
+1 to that for sure running it now myself
Adaway works normally now with the new Cubed kernel.
No more cubed kernel?
Am I correct to assume that this is the same as this:
http://www.droidforums.net/forum/htc-droid-dna-hacking/233497-mod-flashable-block-ads-zip.html
If so, my concerns posted in that thread are still outstanding. My post:
Has anybody else tried this? I'm kinda hesitant. What if it breaks some sites/apps and I need to temporarily disable it? I haven't had much luck with ad free or ad away or even abp on my rooted DNA..
Edit: Of course it's the same; it's posted by the same person lol
terrorist96 said:
Am I correct to assume that this is the same as this:
http://www.droidforums.net/forum/htc-droid-dna-hacking/233497-mod-flashable-block-ads-zip.html
If so, my concerns posted in that thread are still outstanding. My post:
Has anybody else tried this? I'm kinda hesitant. What if it breaks some sites/apps and I need to temporarily disable it? I haven't had much luck with ad free or ad away or even abp on my rooted DNA..
Edit: Of course it's the same; it's posted by the same person lol
Click to expand...
Click to collapse
All of the current custom roms out there have this included. You shouldn't be worried. I've never had an instance where it breaks anything.
Sent from my HTC6435LVW using xda app-developers app
So basically this eliminates the need for a third party app such as adfree/adaway? And what if there needs to be an update applied for the hosts? **** out of luck until someone decides to release an updated zip?
---------- Post added at 11:55 AM ---------- Previous post was at 11:39 AM ----------
Okay, I just tried to flash this but it gave me an MD5 error and said to uncheck the "force MD5 check"... so I did and then it worked. Is that normal?
Flash DSB's stock writeable kernel and then install Adaway. That way you can have ad blocking and you can turn it off if it blocks a website you want to go to.
The other benefit of using a third party app to do this is that it updates the block list on a daily basis as new ad websites are found.
This is strange.. As soon as I booted back up I got an error that Shazam couldn't be updated. I went to the play store and it gave me this error: RPC:S-5:AEC-0.. I followed the instructions in this video: http://www.youtube.com/watch?v=DWSxPXgnWRY
It seems to have been fixed now. When I rebooted again after force stopping the google services framework and clearing the data, Shazam automatically updated. Anyone else have this happen to them?
---------- Post added at 12:11 PM ---------- Previous post was at 12:05 PM ----------
orangechoochoo said:
Flash DSB's stock writeable kernel and then install Adaway. That way you can have ad blocking and you can turn it off if it blocks a website you want to go to.
The other benefit of using a third party app to do this is that it updates the block list on a daily basis as new ad websites are found.
Click to expand...
Click to collapse
I'm kinda circumspect about installing a new kernal cuz that will just open up new variables for something to go wrong. I wanna keep my DNA as stable as I can for as long as I can.
The stock writeable kernel is stable, plus any other apps that require writing to the system (most apps that require root) will work properly.
orangechoochoo said:
The stock writeable kernel is stable, plus any other apps that require writing to the system (most apps that require root) will work properly.
Click to expand...
Click to collapse
If it's so stable then why have there been numerous updates to it?
I don't wanna have to keep up with random updates released for it either and always having to flash a new kernal. I'll just stick with this blockads zip for now since it seems to have worked well. I might re-visit it in the future if it's not working for me anymore.
Thanks for your help though.
DSB has two kernels:
1. Stock writeable with absolutely no problems;
2. Modified with overclock and sweep to wake, this is the one with a lot of updates.
orangechoochoo said:
DSB has two kernels:
1. Stock writeable with absolutely no problems;
2. Modified with overclock and sweep to wake, this is the one with a lot of updates.
Click to expand...
Click to collapse
Are you not talking about the cubed kernel?
Using this
http://forum.xda-developers.com/showthread.php?t=2011243
Only his cubed one comes up, with an extensive change log. The first link in the list of kernels is dead so I'm not sure if that is the one you are referring to.
This thread http://forum.xda-developers.com/showthread.php?t=2064066
There's one guy who has a "problem" because he didn't flash things correctly but he is the only one. I've used it and so have many others and no one has a problem. In fact developers are starting to package this kernel in their roms now.
Related
Here is a little workaround or fix, either way, for the EC09 download problem. I have tried it on stock EC09, replace apk and remove odex file. It also works on TSM and Nameless, I have tried it on all of them.
There are some apk's provided here that if you replace what is currently in your /system/app folder they will fix the download issues.It also makes youtube and netflix work reliably, at least in my case. I have not had others test this out, I wanted to get this out to the XDA community to try out. You have to copy these into the app folder, if you try installing it will fail, I have used root explorer, available in market (not free), and Android Commander, Google it (requires Android SDK setup) to copy these strait to the app folder. your phone will vibrate through most of this it's just complaining about the change. Now for what you really want, the files, ok fine here they are. Please feel free to post results, good or bad, here.
Download Provider APK
Download Provider UI APK
DRM Provider APK
DRM UA APK
SEC Download Provider APK
Security Provider APK
BTW: after every reboot i get a DRM has stopped working message right as everything finishes loading, just click on the Force Close. It only seems to happen on boot and after you close it the app will work fine.
Now you can also get this in a flashable zip courtesy of BakedTator, thanks for the hook up on that.
Download Fix Zip File
OK Devs, Hope these help y'all figure out whats wrong with our leak, if not PLEASE feel free to use these.
And an extra little treat, Netflix from the market works even though it isn't available to us yet, so here it is, non modded downloaded and tested with all EC09 builds, and it has worked on every one of them for me.
Netflix Market App
DaleV said:
Here is a little workaround or fix, either way, for the EC09 download problem. I have tried it on stock EC09, replace apk and remove odex file. It also works on TSM and Nameless, I have tried it on all of them.
There are some apk's provided here that if you replace what is currently in your /system/app folder they will fix the download issues.It also makes youtube and netflix work reliably, at least in my case. I have not had others test this out, I wanted to get this out to the XDA community to try out. You have to copy these into the app folder, if you try installing it will fail, I have used root explorer, available in market (not free), and Android Commander, Google it (requires Android SDK setup) to copy these strait to the app folder. your phone will vibrate through most of this it's just complaining about the change. Now for what you really want, the files, ok fine here they are. Please feel free to post results, good or bad, here.
Download Provider APK
Download Provider UI APK
DRM Provider APK
DRM UA APK
SEC Download Provider APK
Security Provider APK
OK Devs, Hope these help y'all figure out whats wrong with our leak, if not PLEASE feel free to use these.
And an extra little treat, Netflix from the market works even though it isn't available to us yet, so here it is, non modded downloaded and tested with all EC09 builds, and it has worked on every one of them for me.
Netflix Market App
Click to expand...
Click to collapse
where specifically did you pull these from? or if you modded them yourself, what did you do
nice fix...worked perfectly for me on my mesmerize...if you would like, ill package this in a flashable zip
nitsuj17 said:
where specifically did you pull these from? or if you modded them yourself, what did you do
Click to expand...
Click to collapse
Can't remember for sure but I think I got them from the nitrality, or something like that, app, in the market. The appear lets you download updated apps for sgs phones. I will find the app again and let you know for sure Jitsu, I don't have that kind of TSM skill YET to mod apps.
Just found it it was the nitrality app from the market.
Sent from my SCH-I500 using XDA Premium App
BakedTator said:
nice fix...worked perfectly for me on my mesmerize...if you would like, ill package this in a flashable zip
Click to expand...
Click to collapse
That would be great, I am still very much a beginner with android and linux, I know windows, but I'm learning. Any help y'all can provide is of course welcomed and appreciated.
Sent from my SCH-I500 using XDA Premium App
heres a link to the flashable .zip file for anyone that wants it
http://www.megaupload.com/?d=LPCDD66C
all credit to dalev for finding this
BakedTator said:
heres a link to the flashable .zip file for anyone that wants it
http://www.megaupload.com/?d=LPCDD66C
all credit to dalev for finding this
Click to expand...
Click to collapse
So, flash this after flashing ComRom GB?
Flash in the same session, or after letting GB fully boot?
Sent via Tapatalk
bgoodwin said:
So, flash this after flashing ComRom GB?
Flash in the same session, or after letting GB fully boot?
Sent via Tapatalk
Click to expand...
Click to collapse
id flash comm rom Gb, fully boot, reboot to cwm, and then flash this
nice work!
bgoodwin said:
So, flash this after flashing ComRom GB?
Flash in the same session, or after letting GB fully boot?
Sent via Tapatalk
Click to expand...
Click to collapse
If you flash a kernel or recovery you have to reboot directly after flashing it. Hence the giant =) SYSTEM UPDATED REBOOT NOW! when flashing either.... If no kernel or recovery then no need to reboot between....
Sent from my SCH-I500 using XDA App
GrainOsand said:
If you flash a kernel or recovery you have to reboot directly after flashing it. Hence the giant =) SYSTEM UPDATED REBOOT NOW! when flashing either.... If no kernel or recovery then no need to reboot between....
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Meh, if this zip isn't flashing a kernel then it can be flashed pretty much immeditately after commrom. The system update text that flashes everywhere is produced by redbend_ua during kernel flashing. bmlwrite doesn't do that. Soo flashing this after flashing the should be fine.
Sent from my I500 using XDA App
Lately I've been trying Rom after Rom... and now I'm just getting Straight up Pissed!
I've had a Rooted phone Forever, I've Made a few of my Own Roms... But for Whatever reason Can't figure out why I keep Losing Root Access now, On Most of the Roms I Flash?
Also...
When I Leave the phone "Alone" (Untouched) It's been having a Jealousy Problem and All the Android Processes Start Forcing Closed... Starting with the Superuser.apk then the Messages.apk!
I'm getting Sick of having to Pull the Battery and Wipe Cache, and Dalvik just to use my phone.... At least Ten times a day!
Anyone have a Fix? I'm out of Ideas!
It could be the super user update before the latest one not to long ago. I've had the same issue before and after the most recent update I've had no problems. Also which ROM are u using and also which kernel?
Edit: or the other way around... I forgot which it was but superuser was force closing like crazy.
Sent from my PG86100 using xda premium
Raignonem said:
It could be the super user update before the latest one not to long ago. I've had the same issue before and after the most recent update I've had no problems. Also which ROM are u using and also which kernel?
Edit: or the other way around... I forgot which it was but superuser was force closing like crazy.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Same here...
Superuser kept Forcing Closed on me, So I Restored a Backup "Without the Updated Superuser App" and it's Still doing the Same Sh!t...
Also...
I'm Currently using the Hybrid-IIII Rom... With Whatever Kernel it comes with? Lol...
PMGRANDS said:
Lately I've been trying Rom after Rom... and now I'm just getting Straight up Pissed!
I've had a Rooted phone Forever, I've Made a few of my Own Roms... But for Whatever reason Can't figure out why I keep Losing Root Access now, On Most of the Roms I Flash?
Also...
When I Leave the phone "Alone" (Untouched) It's been having a Jealousy Problem and All the Android Processes Start Forcing Closed... Starting with the Superuser.apk then the Messages.apk!
I'm getting Sick of having to Pull the Battery and Wipe Cache, and Dalvik just to use my phone.... At least Ten times a day!
Anyone have a Fix? I'm out of Ideas!
Click to expand...
Click to collapse
You guys need to reflash the su you used when you rooted the phone...that work for me and many others...
Sent From My HTC EVO 3D ROOTED
Yeah, superuser is borked. If you completely wipe the data for it and uncheck the "remember" box it should work again. Kind of a PITA with apps like adblock that request it a dozen times but ohh well
xHausx said:
Yeah, superuser is borked. If you completely wipe the data for it and uncheck the "remember" box it should work again. Kind of a PITA with apps like adblock that request it a dozen times but ohh well
Click to expand...
Click to collapse
The app dev has been working on fixing all the FC issues as their related to the sqlite database access whenever apps were requesting root access it was having issues with accessing its own database where it stored saved permissions. Not being able to access its own database was causing the FC issue.
He explains a lot of the bug trouble shooting on his web site: http://androidsu.com/
latest version on the market should have the majority of fixes. i would give that one a shot. go to market, install latest version and make sure to do the update su binary inside the latest version of the app.
personally, i just got rid of it and put the dev su binary from AOSP on until he has for sure fixed everything. not a very secure solution so i wouldn't recommend it for all, but for developing purposes, it saves me from having to deal with erroneous FC issues for now.
Sup pm man?? Hope all is good. A you could extract a su from a stable rom or a nand you made by using 7zip and install it. Or you could just try one of the super wipe zips around here and see if that works. Its weied though I've heard alot about su fc on a few members but I'm running steeleH rom and I've had not one fc.
Locked & Loaded
""Shooter on Deck""
joeykrim said:
The app dev has been working on fixing all the FC issues as their related to the sqlite database access whenever apps were requesting root access it was having issues with accessing the its own database where it stored saved permissions and crashing.
he explains a lot of the bug trouble shooting on his web site: http://androidsu.com/
latest version on the market should have the majority of fixes. i would give that one a shot. go to market, install latest version and make sure to do the update su binary inside the latest version of the app.
personally, i just got rid of it and put the dev su binary from AOSP on until he has for sure fixed everything. not a very secure solution so i wouldn't recommend it for all, but for developing purposes, it saves me from having to deal with erroneous FC issues for now.
Click to expand...
Click to collapse
Looks like he got it, updating SU through the app will give you 3.0.3 and it's working great again.
If anyone has trouble getting to where you can update it try wiping the data for Superuser first and then go to Superuser -> Menu -> Preferences -> Su binary... (tap to check for updates)
laie1472 said:
Sup pm man?? Hope all is good. A you could extract a su from a stable rom or a nand you made by using 7zip and install it. Or you could just try one of the super wipe zips around here and see if that works. Its weied though I've heard alot about su fc on a few members but I'm running steeleH rom and I've had not one fc.
Locked & Loaded
""Shooter on Deck""
Click to expand...
Click to collapse
@Laie
Not to much man...
How's everything your way Bro?
I'm Hoping Good...
But anyways I'm gonna try the Suggestions You and Everyone else gave me, Hopefully I'll get this piece a Sh!t back Stable... Lol!
Oh and Thanx Everyone for All of your Suggestions and Help!
PMGRANDS said:
@Laie
Not to much man...
How's everything your way Bro?
I'm Hoping Good...
But anyways I'm gonna try the Suggestions You and Everyone else gave me, Hopefully I'll get this piece a Sh!t back Stable... Lol!
Oh and Thanx Everyone for All of your Suggestions and Help!
Click to expand...
Click to collapse
You man same ol fight just a different round. Hopefully man you get it worked out. Oh you might want to check out steelH's rom, I've thrown all kinds of mods at it and its definitely holding up and running stable.
Locked & Loaded
""Shooter on Deck""
laie1472 said:
You man same ol fight just a different round. Hopefully man you get it worked out. Oh you might want to check out steelH's rom, I've thrown all kinds of mods at it and its definitely holding up and running stable.
Locked & Loaded
""Shooter on Deck""
Click to expand...
Click to collapse
I Will check it out...
Do you know off hand if its DeOdexed?
http://goo-inside.me/superuser
for all your older SU installs...try one prior to 3.0.5....
PMGRANDS said:
I Will check it out...
Do you know off hand if its DeOdexed?
Click to expand...
Click to collapse
Yup it is.
Locked & Loaded
""Shooter on Deck""
Hi,
I have just installed Jellybam 3.3.0 on an SGH I777. It is working well so far but I have some performance/compatibility questions.
I generally install a) , b) and c) below and am having some problems and would appreciate any help.
a)System Tuner Pro for cpu usage analysis, freezing persistent trivial tasks, and tweaks for sysctl, build, memory,
sd cache and cpu speed settings. Sysctl and built will not load and the other analysis/tweaks either dont work or cause a Jellybam level reboot
b) Android Assistant used for quick crosschecks on memory, etc. Many of the non realtime functions work ie App2SD.etc
yet the monitor processes intermittently dont work and even cause JellyBam level reboot.
c) Adaway always causes a Jellybam level reboot.
Any insights appreciated.
Thanks
I'm not sure regarding 1 and 2, as I don't use those apps. As far as adaway goes, it's working fine for me on Jellybam 3.2. Have you had it running on prior versions of jellybam and it quit after updating to 3.3?
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
I'm not sure regarding 1 and 2, as I don't use those apps. As far as adaway goes, it's working fine for me on Jellybam 3.2. Have you had it running on prior versions of jellybam and it quit after updating to 3.3?
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
This is my first use of Jellybam. Since I wrote my first post, I have uninstalled and reinstalled Adaway NG, and installed and tested
Adfree, and Adblocker also NG. I then installed AdblockPlus and it failed immediately but after Jellybam restarted, it requested su
permission and now seems to be working??? Maybe a permission issue or file relocation issue?
kwmike said:
This is my first use of Jellybam. Since I wrote my first post, I have uninstalled and reinstalled Adaway NG, and installed and tested
Adfree, and Adblocker also NG. I then installed AdblockPlus and it failed immediately but after Jellybam restarted, it requested su
permission and now seems to be working??? Maybe a permission issue or file relocation issue?
Click to expand...
Click to collapse
I'd have to guess you have some setting or app somewhere that is conflicting with adblockers, or you have a bad download of JellyBam (I'd suspect that's unlikely as I think you'd see other odd behaviors as well). I just updated to 3.3.0 (needed to switch back to stock kernel anyway) and just updated adaway with no problems (it was already installed - just did cache/dalvik wipe for the update) and it's working normally.
Sorry I don't have any other suggestions...good luck.
dandrumheller said:
I'd have to guess you have some setting or app somewhere that is conflicting with adblockers, or you have a bad download of JellyBam (I'd suspect that's unlikely as I think you'd see other odd behaviors as well). I just updated to 3.3.0 (needed to switch back to stock kernel anyway) and just updated adaway with no problems (it was already installed - just did cache/dalvik wipe for the update) and it's working normally.
Sorry I don't have any other suggestions...good luck.
Click to expand...
Click to collapse
Just to point out, JellyBAM has it's own adblocking by way of the hosts file. This could be causing conflict with adblocking apps. Not sure you'd need to double up like that. If you prefer to use an app i'd suggest swapping out the hosts file for a blank one. Essentially choose one or the other.
just my $.02
nizbot said:
Just to point out, JellyBAM has it's own adblocking by way of the hosts file. This could be causing conflict with adblocking apps. Not sure you'd need to double up like that. If you prefer to use an app i'd suggest swapping out the hosts file for a blank one. Essentially choose one or the other.
just my $.02
Click to expand...
Click to collapse
Hadn't thought of that... I was under the impression that the ad blockers just over wrote the host file with their stuff anyway... Guess I was wrong. Thanks for the info.
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
Hadn't thought of that... I was under the impression that the ad blockers just over wrote the host file with their stuff anyway... Guess I was wrong. Thanks for the info.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Actually this is exactly what happens
Sent from my Galaxy Nexus
ViperDNA ROM Discussion & Support Thread​
Due to the popularity of the ViperDNA rom, and wanting to better assist the users, we are opening this thread to allow for non development related questions and discussion, support questions, advice, help and how to, all that good stuff.
I am not the developer of ViperDNA, I'm simply maintaining this thread so that the main developer is not overwhelmed with too much general discussion and not able to focus on the development aspect of the rom. Many of you know me, my niche has been and will continue to be trouble shooting, support, and helping new users get started in the custom world of Android.
In the thread, you can post questions about installations, discussions of potential bugs as well as user errors, and general Q&A related to the ViperDNA ROM. I will be updating this OP to look much better, and will also be adding sections and subsections with important links.
I urge all of our users to participate and help out with this thread, this is a community effort not just me alone.
ViperDNA 1.2.0 Info
ROM NEEDS A CLEAN INSTALL
Instructions for Clean Install.
Note S On users will want a copy of rom zip on their computer desktop and a copy on the DNA's sdcard, s off only needs the rom zip file on the sdcard
1. Make a Nandroid backup just in case
2. Reboot to Recovery
3. Wipe these INSIDE recovery: Factory Reset, System, Dalvic cache
4. Choose the flash zip menu and select zip file from the sdcard and install the rom
5. S-Off users say yes to the reboot after installation is complete.
*5b. S-On Users will need to extract the rom zip file in a desktop folder and find the file boot.img and copy to their working adb/fastboot folder (For me it would be C:/Android-sdk/Platform-tools)
*5c. Right click while holding shift, in a blank space in the folders where fastboot.exe is located and choose "open command window here" from the right click menu
Run the command "fastboot flash boot boot.img" without the quotes and press enter when its done type "fastboot reboot" without quotes and press enter.
That's It, Setup is Complete
Note: Factory Reset in recovery means wiping the data partition except for media (internal storage, or sdcard) and wiping cache.
Radio and Firmware Information: You do not have to be on the latest firmware (2.04) to flash Viper 1.2.0. I recommend that you achieve s off and try the 2.0.4 radios if battery life is a concern especially because one will work better for your unique phone's hardware and network, signal strength and usage pattern.
Kernel: ONLY RUN THE KERNEL THAT'S INSTALLED IN THE ROM. Zone also has a stock 2.04 kernel posted in the android development section.
Do NOT run custom kernels with this rom until custom 2.04 kernels available, which will be after HTC releases the kernel source.
1.2.0 Important Tips
For instant help you can use the IRC Channel: http://chat.andirc.net:8080/?channels=#droid-dna
Just click on Docnok63 and select PM
For Google maps to work you need to open settings/location and check to enable the new Google location settings. There's now four options instead of three.
Another one for Install Instructions
Nice Charlie :good:
Count me in ! (for assisting with questions)
Re: [INFO][FAQ]ViperDNA ROM Discussion
I have two questions. How can I add more apps on the home screans. And is there anyway to change up the app drawer. I prefer scrolling vertically rather then horizontal. Everything is running perfectly just looking to tweak things a little.
Re: [INFO][FAQ]ViperDNA ROM Discussion
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Re: [INFO][FAQ]ViperDNA ROM Discussion
krazya said:
I have two questions. How can I add more apps on the home screans. And is there anyway to change up the app drawer. I prefer scrolling vertically rather then horizontal. Everything is running perfectly just looking to tweak things a little.
Click to expand...
Click to collapse
Long press the app in the app drawer and move it to the home screen.
Install a different launcher, I highly recommend nova, apex is another good one
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
I have some similar issues too, but not until after I unmount the drive.
Sent from my HTC6435LVW using xda app-developers app
Re: [INFO][FAQ]ViperDNA ROM Discussion
Exactly what I was looking for thank you! Switched to apex and will have to tweak it until its just right.
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Re: [INFO][FAQ]ViperDNA ROM Discussion
RLGL said:
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Click to expand...
Click to collapse
Im having the same problem and after some research it looks like people are having the same issues on stock and custom roms.
I'm using stickmount pro. What I've found is that after unmounting or removing the device a reboot is required because my apps go haywire. The only time I've seen similar issues is when people use something like apps2sd and their phone boots before the sdcard is mounted, so the shortcuts on the homescreen or widgets disappear and the app force closes all over the place and disappears from the app drawer.
Obviously the problem with us is not because the apps are installed on an external directory, but the symptoms are very similar.
I will be doing more research and its going to be a focus of mine. I'll keep you guys and gals updated and would love to hear any input or see links that you run across involving DNA and OTG.
Something else with OTG is that when I unmount the USB drive in stickmount, and then I unplug the drive, I get the warning message about the drive being removed while in use or something like that. So its almost like stickmount isn't unmounting, it just thinks its unmounting, and that improper unmounting is what sends the directories haywire.
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
Re: [INFO][FAQ]ViperDNA ROM Discussion
RLGL said:
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Click to expand...
Click to collapse
I get an error on connecting otg about not being a valid charging source. On disconnect, several processes crash, which trace to specific apps, including Battery Monitor Widget Pro, Pure Messenger and Gmail Label Notifier. If I disable those apps, then no crash, so I'm pretty sure this is not ROM related.
Sent from my HTC6435LVW using Tapatalk 2
Re: [INFO][FAQ]ViperDNA ROM Discussion
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
Interesting indeed... I've also had this same issue with the SwiftKey error while utilizing otg. Thanks for looking into this Charlie.
Sent from a Venomous DNA via Southwest desert frequencies
Used the search in the other thread but didn't quite find the answer I was looking for.
Do I start with 1.1.0 and then use the OTA to update to 1.1.3? Should I just wait till 1.2 comes out and then flash, if it makes any difference?
UrGuardian999 said:
Used the search in the other thread but didn't quite find the answer I was looking for.
Do I start with 1.1.0 and then use the OTA to update to 1.1.3? Should I just wait till 1.2 comes out and then flash, if it makes any difference?
Click to expand...
Click to collapse
Download 1.1.0 from the original page.
Download this zip file to PREVENT the VERIZON ota. http://forum.xda-developers.com/showthread.php?t=2149417
Install 1.1.0. reboot.
IMMEDIATELY after it boots reboot into recovery and install the zip file above.
then boot and let venom take you through all 3 updates on it's own.
Droidem said:
Download 1.1.0 from the original page.
Download this zip file to PREVENT the VERIZON ota. http://forum.xda-developers.com/showthread.php?t=2149417
Install 1.1.0. reboot.
IMMEDIATELY after it boots reboot into recovery and install the zip file above.
then boot and let venom take you through all 3 updates on it's own.
Click to expand...
Click to collapse
If I'm on wi-fi only and will be on wi-fi only for a few months, do I have to worry about the disable ota verizon part? Just curious really, sounds easy enough
Re: [INFO][FAQ]ViperDNA ROM Discussion
UrGuardian999 said:
If I'm on wi-fi only and will be on wi-fi only for a few months, do I have to worry about the disable ota verizon part? Just curious really, sounds easy enough
Click to expand...
Click to collapse
You really don't have to worry about it. Worse thing that would happen is that it auto downloads, it can't install on a custom recovery. And 1.1.3 has the ota removed so you don't even have to worry about it installing.
Sent from my HTC6435LVW using xda app-developers app
Re: [INFO][FAQ]ViperDNA ROM Discussion
I didn't choose to apply the sense camera mod during instal. Is there a way to apply them after the fact?
Sent from my HTC6435LVW using xda app-developers app
Hey guys looking for help with Viper rom. I used fastboot to flash all the way up to version 1.1.3 and the boot img. My phone is booting properly however when I go into the hub and try to apply tweaks or download themes and such i get a blank white screen. Would someone please help me
Disclaimer: Flash this ROM at your own risk. I am not responsible for what you do on your device. I left this stock to provide a base for anybody that wants to use it. Mod this rom how you want. Just please remember to give credit where credit is due.
This is a pure stock rooted rom. It has items like busybox, init.d support and so forth. No apps were added or removed.
Kernel source is available from htcdev.com Using stock zImage with no changes at all.
Downloads
mine too just in case
Awesome! Thanks jmz!
a
Is that stock with htc sense or just pure android ? And do you know how can i make my device write to external Sd card and not only internal storage ?
pafchu said:
Is that stock with htc sense or just pure android ? And do you know how can i make my device write to external Sd card and not only internal storage ?
Click to expand...
Click to collapse
- unlock bootloader
- flash TWRP
- flash root or rooted rom
- flash new kernel
- instal SD Fix from google play (free)
that`s all... working
It's stock with sense.
ok that worked thanks!!! can i also kindly ask if someone can provide a stock kernel as i want to use ART instead of Dalvik but after flashing the kernel provided here i am unable to make my device switch to ART.. thanks in advance
pafchu said:
ok that worked thanks!!! can i also kindly ask if someone can provide a stock kernel as i want to use ART instead of Dalvik but after flashing the kernel provided here i am unable to make my device switch to ART.. thanks in advance
Click to expand...
Click to collapse
What exactly is the issue?
jmz said:
What exactly is the issue?
Click to expand...
Click to collapse
the issue is that after flashing different kernel i am unable to switch from Dalvik to ART...i need a stock kernel so i can flash it and use ART.
Hope that helps!
I am also having few problems with these stock ROMs.
Icons on the lock screen are misplaced (little to the left).
Can't completely remove notification sounds (make them silent).
The AT&T and HTC images at the bootscreen are smaller (there is a big black frame).
I will post pictures when I get back home from work.
sorry guys if i bothered you with my stupid questions but i found the problem that was preventing me from switching Dalvik to ART. it was xposed framework that caused the issue and after i uninstalled the framework i was able to switch to ART thanks for your help anyway
I will add few pictures of my screen.
http://i59.tinypic.com/n1fnn8.jpg
http://i60.tinypic.com/90c7pl.jpg
http://i62.tinypic.com/v3eyxi.jpg
http://i58.tinypic.com/2jdfl9h.jpg
http://i57.tinypic.com/1zx2kb4.jpg
Can't really figure out how to fix that.
I tried both ROMs and I am currently with jmz's kernel.
keep having random reboot,, need a stock kernal:crying:
Nixing said:
I will add few pictures of my screen.
Can't really figure out how to fix that.
I tried both ROMs and I am currently with jmz's kernel.
Click to expand...
Click to collapse
In case you didn't fix that:
The AT&T Desire 610 has a 480*854 screen. If you are running an AT&T rom on an international Desire 610 you may have this problem.
deconectat said:
In case you didn't fix that:
The AT&T Desire 610 has a 480*854 screen. If you are running an AT&T rom on an international Desire 610 you may have this problem.
Click to expand...
Click to collapse
Thank you very much for your answer.
I didn't knew that.
wheres the rom? On the DL page, there is nothing but a list of devices, none of which seem to be htc, much less 610.
Ok, figured that out... My trouble is, I cant seem to get root working! I installed rooted rom, even the kernal that goes with it, but still can not remove apps from att. Thats kinda my whole goal, but not having much luck getting it going. Any ideas what Im doing wrong??
---------- Post added at 07:10 AM ---------- Previous post was at 06:35 AM ----------
OK, Ive missed something.. I can even remove files from the rom, and they are stll there... I guess I've messed something up, or missed something completely. No matter what I do, I can not remove a system app, even if I remove it from the rom and flash it back to the phone...
klloyd said:
Ok, figured that out... My trouble is, I cant seem to get root working! I installed rooted rom, even the kernal that goes with it, but still can not remove apps from att. Thats kinda my whole goal, but not having much luck getting it going. Any ideas what Im doing wrong??
---------- Post added at 07:10 AM ---------- Previous post was at 06:35 AM ----------
OK, Ive missed something.. I can even remove files from the rom, and they are stll there... I guess I've messed something up, or missed something completely. No matter what I do, I can not remove a system app, even if I remove it from the rom and flash it back to the phone...
Click to expand...
Click to collapse
If you're using the at&t 610, flash the Rom and kernel. Go to the play store after signing into your Google account.
Download the kitkat sd card fix and titanium backup.
Make sure you have the latest busybox and root binaries before hand.
Use the sd card fix app, restart your phone. Once it turns back on, wait a solid minute as it runs the start up. Now go into titanium back up and start deleting apps.
That should do it.
If not, follow up with deleting the app and it's associated .apk in your system/apps folder.
klloyd said:
Ok, figured that out... My trouble is, I cant seem to get root working! I installed rooted rom, even the kernal that goes with it, but still can not remove apps from att. Thats kinda my whole goal, but not having much luck getting it going. Any ideas what Im doing wrong??
---------- Post added at 07:10 AM ---------- Previous post was at 06:35 AM ----------
OK, Ive missed something.. I can even remove files from the rom, and they are stll there... I guess I've messed something up, or missed something completely. No matter what I do, I can not remove a system app, even if I remove it from the rom and flash it back to the phone...
Click to expand...
Click to collapse
My guess is you're S-on, the phone won't allow you to write or modify the system files. Honestly you're not truly rooted unless you're s-off. Where did you find the download? I don't see our phone in the list either
https://www.androidfilehost.com/?w=devices&uid=9390288116658470939
All files are mirrored here now