Dear all,
my market app was error when I'm downgrade from GB to Froyo.
It's dont recognize my phone. So there is no ACCEPT button in EULA.
Please All Senshei, what should I do?
Thanks
Related
I'm hoping you folks can help me out. I have tried to upgrade my XDA2 using the Himalaya_WM2003SE_Upgrade but it keeps coming up with:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've got:
FCC ID: NM8HIMALAYAS
IMEI : 351938002885560
Now the unit just gets to the bootloader "SERIAL, v1.06" until I put it in the cradle and it goes to "USB, v1.06". I ran the upgrade following the instructions to the letter but no joy! Am I using the incorrect upgrade utility as the error message says or am I missing something? Any help to restore my XDA2 will be gratefully received!!!
Thanks again!!
which rom are you tryin to upgrade to and provided by who ???
regards
jeetz
I'm basically trying to upgrade my O2 PH10B XDA2 to anything that works! It seems whatever I try, it stays on the bootloader screen with either "Serial or USB" on the display depending whether it's in the cradle or not. I can't do anything with it. I've tried to use the "Himalaya_WM2003SE_Upgrade" utility but as I said, it just tells me that this is not corrrect for my device.
HELP!!
Thanks :roll:
try to reset your device and run himalaya upgrade again
I tried it soooo many times but I still get:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've even tried the O2 Xda_II_172181_Final utility but I still get the same thing. Why does it say it is not designed for my device when I have an O2 Himalaya? If anyone can help I will pledge my undying admiration and possibly even lay down my life for them if required! (sorry, that should have read "wife", not life!) :lol:
glt56 said:
I tried it soooo many times but I still get:
"Error 150:ROM UPGRADE UTILITY ERROR.
This ROM upgrade utility does not design for your device.
Please get the proper ROM upgrade utility and try again!"
I've even tried the O2 Xda_II_172181_Final utility but I still get the same thing. Why does it say it is not designed for my device when I have an O2 Himalaya? If anyone can help I will pledge my undying admiration and possibly even lay down my life for them if required! (sorry, that should have read "wife", not life!) :lol:
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=15382&highlight=
try mysterman rom from here dont go for himaupgrade and stuff try to run the setup direct with default radio ....
Success!!!!!
Finally managed to get my XDA2 back to life after some severe CPR & Mouth-to-mouth, and WM2003SEO2UKv2.rar. Thanks for all the suggestions and help.
I also now have a dead M1000.
Where did you get your rom that worked from?
Can you post it please?
Thanks
R
plsssssss help me i also have same problem plsss tell me how u get that pls
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
ERMANO.ESTE said:
HI THERE,
I AM USING WM 6.0 WITH SPL 1.1. THE PROBLEM IS THE ERROR 270.
WHENEVER I TRY TO UPGRADE MY ROM TO WM6.1 OR WM6.5 OR EVEN WHEN I TRY TO UPGRADE MY RADIO TO VERSION 1.57, THE MOBILE SIMPLY GOES TO BOOTLOADER AND AFTER COMPLETING JUST 1% , IT RESTARTS AND THE PC SHOWS "ERROR 270 [UPDATE ERROR]- THE IMAGE FILE IS CORRUPTED. PLEASE CHECK YOUR UPDATE UTILITY".
I HAVE TRIED DOING HARD RESET BUT OF NO USE.
EVERYTHING ELSE (LIKE CALLS, GPRS, GPS) IS WORKING FINE. BUT I CANNOT UPGRADE THE ROM.
ANY SUGGESTION TO PREVIOUS POSTS OR NEW SOLUTIONS IS NEEDED.
Click to expand...
Click to collapse
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
How to get mac address
lakeman said:
Hi you need to unlock the phone
read the beginners guide in the sticky for WM6 section
Read first then flash
Click to expand...
Click to collapse
Thanks alot lakeman for ur help.
SOLVED OUT THAT ISSUE, BUT FACED A NEW ONE.
I M STUCK AT BOOTLOADER SCREEN WHILE TRYING TO INSTALL WM6.5.
BUT I FIGURED OUT A WAY BY USING MAC AND MTTY FORMAT.
BUT I DONT KNOW HOW TO GET MY MAC ADDRESS WHILE THE ONLY THING I CAN ACCESS IS THE BOOTLOADER SCREEN?
IS IT PRINTED SOMEWHERE ON MY DEVICE OR MANUALS OR IS THERE ANY SPECIFIC COMMAND FOR THAT?
Hi there guys!
Here's the thing:
Dead pixels showed up on my T-Mobile G2 Touch.
Now I'm running FroydVillain 1.7.2 - FlyKernel M691 m352 which is a great ROM for me.
But, I must get back to StockROM, so I can use my guarantee.
I bought T-Mobile G2 Touch here in Croatia. When I try to install
RUU_Hero_T-Mobile_UK_2.73.110.26_release_signed_NoDriver
normally I get error 131 customer something_something.
Before FroydVillain I had VillainROM v12, so I created GoldCard.
In the meantime, I formatted memory card several times.
I tried to create GoldCard again, but on phone I get this error:
SD card damaged. You may need to format card.
After formatting, card is working normally.
I tried this several times.
So, how should I back to StockROM on T-Mobile G2 Touch?
download and Flash Android 2.2.1 Froyo (Fusion!ROM 2.2.1) 12/03/2010 UPDATE 10
and use it for 30 min..as you want to use it normaly.
then connect the cable (maybe..I don't remember...mount it) and hit that RUU_Hero_T-Mobile_UK_2.73.110.26_release_signed_NoDriver.exe
normaly suppose to work. It worked for me... I returned from Froyo to 1.6 stock in notime
if it works, please hit the THANK YOU button
Sounds like the goldcard process didn't work (most likely problem) or that the SD card is damaged. If you haven't already, I would use the windows tool here to create your goldcard.
A common error when creating the goldcard which causes the 'need to format' error is opening it as a logical disk instead of a physical disk when hex editing, which is another point to look at if you want to follow one of the manual guides.
Nope, all what I done was fine. Strict to the manual.
Already tried tool.
No results.
did you tried my method?
If you bought you're phone in croatia why are you installing the UK rru rom? Try a WWE (worldwide) one
Edit: Reported original post. (Q&A)
Probably because WWE isn't anything like the stock ROM that came with a T-Mobile G2 Touch bought in Croatia, the closest thing is the T-Mobile UK ROM. I think I remember my phone bought also in T-Mobile Croatia not having Croatian but English menus with the stock ROM.
Sent from my HTC Hero using XDA App
did you manage to fix problem with error 131 ?
I cannot revert back to stock rom
Hi got problem with my touch screen so I wanna send him back to RMA.. but 1st i need to restore original Rom..
I've tried 'RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver' but got error 140 (checking version probably...) anyone can help ?
edit: Solved
ooouch
What rooting way did you use to do it...onyl some rooting options are undoable but the chance u used the right way its very slim can i please know the way u used?
need to unroot my phone.. Cannot run neither RUU... WWE, DE, UK, PL... tried with different versions 2.xx to 3.xxx neither works
After reboot to bootloader I get error 131 costumer ID error... There is NO ROMs to download for Macedonia or Hungary T-MOBILE which is our headquarter
please help