Hi guys,
My friend had got a Tab from Dubai (Vendeor person unknown, abit strange).
He said it as Samsung Galaxy Tab 10.1 and when i had a look at it for the first time front and back (having the Samsung logo engraved at back) i thought it was true.
But the Tab is pattern locked and we hell donot know the pattern
When i tried to enter recovery mode (Vol- + Power) it didnt enter and then i tried Vol+ + Power so it enetered download mode and i did not have any control at that screen. When i connected to PC in download mode it the PC said M9701 connected (which is a chinese tablet)
When i booted it normally i never got a Samsung logo at any point (really strange thing).It has three kinds of android screens coming over while booting one had kw350.com logo at the bottom as a signature.
I am posting my db folder of the pics of the Tab and the booting process too.
https://www.dropbox.com/sh/selfv7ucuvjb5v5/Wy5kBTPQNw
I have booted into a mode (recovery/download doesnot know) by pressing Vol+ + Power. A android was shown sleeping and a red triangle mark on it. I successfully installed the adb drivers and adb detected the device in that mode as recovery device. But when i ran the command
adb shell
it said
--exec :/system/bin/sh not found
Click to expand...
Click to collapse
When i tried
adb remount
it said
Remount failed:Success
Click to expand...
Click to collapse
Please help me out...
Please help me identify it and i want to hard reset it to the factory settings.
Soryy for bumping this thread.... need the solution.. please...
Related
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.
I bought Spring W-100 China phone which looks approximately like Note1.
This phone has no SD card. Single SIM. No ROOT. Everything is ORIGINAL STOCK.
Recovery without commands - Blank Recovery - Android lying on its back with chest open and triangle with RED exclamatory mark.
I bought it from local market one month ago. Everything was okay.
But one day my brother took my phone for playing Subway Surfers.
And Oh...when i saw my phone..it was locked with Too many pattern lock attempts.
:crying: I am totally HOPELESS now.:crying:
I had tried whatever I got On XDA and another places.
At last I joined and made this thread in Android's HEAVEN - XDA..for the good.
Here are my assumptions:
1. There is no SD card..so I can't flash AROMA flasher and remove the gesture.key
2. I think ADB is going pretty well because I can reboot, reboot recovery and download with:
adb -d reboot; adb -d reboot recovery and adb reboot download commands respectively.
--wipe_data command is giving access denied error and rm /data/system/gesture.key is giving the same error.
I think it is because my phone is not rooted.
3. I can boot into bootloader with this code : adb reboot bootloader where only android written.
and then followed by this I tried On being in BOOTLOADER : fastboot -w
4. I had saw a method of pulling settings...but that method did't worked for me as well.
:crying:
:crying:
:crying:
:crying:
Code:
Please help...Can.t sort it out.....!!!
Click to expand...
Click to collapse
:crying:
:crying:
:crying:
:crying:
..PLEASE..I am STUCK with my phone not working....!!
Isn't anyone present here on XDA to help me out...?
Today i recognized that
Code:
I AM ABLE TO FLASH RECOVERY.IMG WITH FASTBOOT
.
Java Baba said:
Isn't anyone present here on XDA to help me out...?
Today i recognized that
Code:
I AM ABLE TO FLASH RECOVERY.IMG WITH FASTBOOT
.
Click to expand...
Click to collapse
open stock Recovery, when you see the android with red exclaimation mark, HOLD power button and press Volume Up. if that doesnt work, try Volume Down. A menu will come up, choose wipe data/factory reset. DONE!
I tried everything..!!
i wanna tell u that i tried everything being in BLANK recovery mode:
power plus vol+
power plus vol-
power plus both vol+ & vol-
menu touch button
home & back touch button
....No Luck..!!
..As of now i think there are three solutions only for my problem(as I think) :
1. Flash RECOVERY.IMG for same make - because I can boot into fastboot mode.
2. Flash a custom or stock ROM (which I cannot get after searching a lot)
3. By using VOLCANOBOX software....(without BOX)
...My local MOBILE Repairing Shops are totally unaware of these things...
tell me that is there any UNIVERSAL recovery.img that can be flashed through fastboot mode to do a factory reset from phone because there is no ROOT and ADB is unable to do my task..
Here are full specification (as far I remember) :
Model:Spring W-100
Firmware version:4.0.3
Resolution:480*800
Manufacturer:Unknown
Serial:ac953dd2
MAC:40:2c:f4:31:f4:1d
Android Version:4.0.3
Baseband version:Unknown
Kernel version:msm7630_surf-user 4.0.3 IML74K eng.root.20120916.230301 test-keys…
MSM7630 QUALCOMM Snapdragon S2
Hi,
As the tile says, my phone has stuck on the Samsung galaxy s3 logo with broken power button to enter the Downloadmod for few days. According to stuck power button, I had to remove it long time ago. Since then, I've had to use Fastboot or charger method to enter recovery mode.
I have listed down what I have done so far below (no luck at all):
- Adb shell doesn't find the phone
- Odin doesn't see it either
- Samsung 300K app is also not finding it.
- The phone doesn't read the SD card for so long
- The computer recognises the phone via the usb connection "beep" sound but no other signs.
Please let me know how can I enter recovery mode or even get a back up of my stuff inside the phone, before throw this piece of **** away!
Thanks in advance for all replies. :good::good:
Search for the hundreds of similar 'save my data' threads, emmc is not a safe storage device.
This is the Fusion5 in question
https://www.amazon.co.uk/gp/product/B01CCYEIW2/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
I tried rooting the tablet using kingoroot - both the Android app & the PC program..All 'failed' - but tablet was still running ok, so I'm guessing it's not possible to root it with these programs
Anyway, I accidentally left the battery to drain out, causing it to turn off - so started recharging it.
Once I thought it had enough charge I tried turned on the tablet, saw the White 'Fusion5' title screen followed by the black 'android' text screen... but now it's stuck on the android screen
So I've tried:-
> Turning off/on by power switch - same thing (White Fusion5/Black android screens)
> Press the small 'reset' hole on the back - same thing
> Tired different combo's of Power button/ vol +/vol - buttons - same thing
Have I bricked it ??
Is there a way to get the thing to boot up into recovery.. if so what's the button combo's ? or is there some other way using PC
IS there a recovery mode for this tablet or did kingoroot wipe it/corrupt it somehow ??
Any help greatly appreciated
EDIT: btw further searching seems to show theres a 'kingroot' and a 'kingoroot'
- but 'kingroot' website [https://kingroot.net] doesn't exist but a google search shows kingroot [https://king-root.net/] however the download is being picked up by Virus checker as malware
Has it booted far enough to retrieve a logcat?
If ADB is responding, adb reboot recovery is another hope.
qeexo said:
Has it booted far enough to retrieve a logcat?
If ADB is responding, adb reboot recovery is another hope.
Click to expand...
Click to collapse
Thanks for the quick reply however the main reason I went 'kingoroot' was for simplicity since I don't know anything about ADB
(I know of it, just not how to use it)
Anyway,tried following one of the many guides (this one in fact)
but when I do 'adb devices' it's not showing anything, although it's possible something is conflicting because even though my Samsung phone shows up when I plug it in, doing 'adb devices' shows nothing - I would've expected the Samsung to show up at least
I'll have more time during weekend to try & figure out why phone not showing in ADB & experiment with ADB a bit more
Hi
yesterday my tab s6 screen got unresponsible without anything else happened..
Then i found out that if i used the pen - the n i could turn it off from drop down menu.
I did that but then when i tried to turn it on it got stuck on that bootloop!
I can not access recovery mode - only download mode.
When i put it on charge it starts booting without showing battery percent and boots over and over until battery is drained.
In download mode i tried to flash Bootloader and firmware - but no luck ( odin proceduce succeded but the tab is still in the same bootloop )..
Still can't reach recovery menu..
Any ideas?
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
bartleby999 said:
Recovery Mode is tricky to get to on this tablet - The timings of the button presses are difficult to nail. Assuming you weren't trying to flash anything to your tablet prior to it boot looping, I don't see any reason why you couldn't access Recovery Mode.
Reboot Tab by pressing and holding both Power (Bixby) button and volume down. Once screen turns off immediately press Power and Volume Up, let go once you see Samsung logo.
Click to expand...
Click to collapse
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
egidsatr said:
Tried again in 30min.. no luck :/
As soon as the screen gets dark the device restarts.. sometimes i manage to hold those buttons but still no reovery mode :/
Click to expand...
Click to collapse
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
bartleby999 said:
Have you done anything to your tablet prior to bootloop? Tried to flash anything, deleted anything?
Again, there's no reason you shouldn't be able to access Recovery this situation is exactly why it's there.
Click to expand...
Click to collapse
I opened NBA 2K Mobile and then i went away for like 20mins..
Then i opened the tab and screen was not reacting - only with pen.
I think the USB debugging is not enabled - is there any ways how to enable it without rooting?
Just tried to install a firmware through download mode - Odin shows "passed" and my tab is still in the same sh** ..:/
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
JayR0503 said:
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
Cannot access recovery mode also.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. Messed up big time :'(
Thank you in advance.
Click to expand...
Click to collapse
What country are you located in?
iBowToAndroid said:
What country are you located in?
Click to expand...
Click to collapse
UAE..
"setup connection failed" is a USB error. Try a different cable, or a different port on the computer, or a totally different computer