hi,
i hope someone can help: i was just flashing a new rom update, when in had a reset/reboot during the copy-process (so not planed or so). since then all is ****ed up.
twrp shows starting image, nothing more -> reboot loop
flashed kernel again -> reboot loop
flashed twrp again -> reboot loop
only bootloader is working.
please help
thanks a lot
call fastboot erase cache
did it
wipe and flash Rom from TWRP again
thanks for your answer. did it. the cache wipe solved the issue that twrp didn't load. so no twrp, no recovery/install
Related
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
I was running cm12.1_janice-130915 on my Samsung Galaxy S Advance I9070 for a couple of days, than I got a bug which could perhaps be fixed by wiping the dalvik chache and another chache, so I long-clicked the power button, opened the reboot menu and chose 'Reboot into Recovery' after which it rebooted into recovery. However when I tell it from the recovery to reboot to system, it won't, it will reboot to recovery again.
So I started of by wiping partitions and chaches in the hope that the setting would be 'undone' in the end I did a factory reset and put the rom on my phone again, though it's still booting into recovery modus.
I don't know what I could do anymore. ADB-sideload won't run (if that would be any help). Is my phone a brick now or is there hope?
Sounds like you will need to restore the stock firmware / OS with Odin.
Yesterday i tried flashing twrp in 5.1.1 after reboot it shows recovery is not sendroid kind of error then phone went to bootloops after that i flashed a root kernel while phone was in bootloops nothing happened to fix everything i tried flashing stock firmware via odin in sboot. bin odin is giving error please help my phone is stuck in boot loops. any way to flash recovery or to fix bootloops i don't want to lose data thanks in advanced.
Sent from my falcon using Tapatalk
reboot to recovery mode...wipe cache and dalvik cache....and reboot system...but if u cant reboot....try flashing the twrp recovery again.....this time, uncheck auto reboot.....after u flash the twrp recovery...boot to recovery and wipe cache and dalvik cache and reboot system.....i hope it works....if not...please download the firmware with the latest bootloader from sammobile
I flashed the crdroid rom and after doing so my phone always boots into recovery mode. It does not show the logo it just shows the unlocked boot loader screen then boots to recovery. I have tried clearing the cache and data too but that did not work.
I am using twrp recovery 3.02.
I also tried flashing cyanogen mod on this device but after flashing it it would not get past the boot animation. I reformatted the device after that and restored it using a nandroid backup even this gave me a lot of problems initially but a fastboot clear cache sorted those out.
Any and all help would be really appreciated
Flash the stock rom and root the device and try again
Sorry for my english
flash the rom in fastboot without flashing motoboot and gpt.bin and then boot it after sucessful boot reflash ur recovery and then flash ur desired rom with only cache and delvik wipe.... Hit thanks if it worked.
Hello there,
I have successfully flashed custom recovery (TWRP 3.0) into my Leagoo Alfa 1. (it has stock rom and kernel)
Whenever I flash supersu.zip via TWRP, wipe cache, dalvik-cache, data and reboot system, my phone optimizes apps and boots up.
Then after like 10 seconds it reboots for no reason and phone get stuck on bootloop at logo.
Re-wiping cache did not work.
There are no tools or custom roms for this device.
Why is it happening and how can I solve this issue?
help?