Hello Android users I have one problem with my phone so i need your advice.
Yesterday i installed new software 4.1.2 For my baltic region SEB i did factory reset before and after also by mistake i did wipe cache partition,
So today when i tried to connect my phone via usb in phone i see that it's are charging but on my computer there are no efects. But when i turn on downloading mode odin software finds the phone and see it.
I tryed reinstalling KIES also turning on debugin USB, reinstalling oldest firmware but there is no changes and my phone cant connect with usb to phone. Have you any advices ? :crying:
Wipe cache has no effect. Make sure your computer-side drivers are ok and check the cable (even if it works in download mode)
Remove the drivers completely if unsure and optionally reinstall them manually.
Related
Hey everyone,
So, I rooted and flashed my SGS2 back in july... everything went perfectly... but the Asus that I used to flash has been sold, and since I flash using CWM, not odin, I had not even realized this.... until I had to root and flash my mom's i9000m
My new HP is having a really hard time trying to detect any of my android devices. Here is what I tried:
- USB debugging is most certainly on
- Putting phone in download, plugging into laptop, letting install drivers - NOTHING in odin
- Finding the samsung usb mobile device drivers on tutorials on the internet - NOTHING in odin
- Installing kies, letting that install drivers - still nothing in odin or kies
- Try different USB port
- Try different USB cable
- Try pulling the battery and sim
It definitely is not the phone, because my SGS2, or my parents S vibrant or S captivate are detected by kies or odin. Also I can get a connection to storage when phone is on, ect.
Is there anything I missed? This new HP is starting to piss me off lol. Everything went to smoothly on the Asus.
did you turn off usb debugging. it interferes with the connection
settings - applications-development.
If I turn off USB debugging and enter kies mode while the phone is on (normally) it will say Connected...on the phone, but my laptop does not detect anything, kies is still waiting for a connection.
Ideally I want USB Debugging on, as I want to connect to odin, not kies. But as neither is working... I figured I would just see what I could get to connect.
SGS2 Connect
Power off phone
Install Kies
Power on phone start Kies connect Samsung USB cable .
Let Kies find phone .
NO
Then try Kies not running put phone in USB Mass storage mode connect cable wait for windows to find USB mass storage device and install drivers .
jje
Turns out there was an issue with my android SDK installation. Reinstalled it and re downloaded drivers. Everything works! Thread closed!
Thanks for the suggestions
Hi,
First of all, I've been searching for this problem. And up to now, I haven't found a solution yet.
Odin won't recognize my phone in download mode. I am on Hydrog3nics ROM right now, but I want to go back to stock (I need to send my phone for repair, because of dust under my camera lens).
Things I've tried:
- Reinstalled my drivers with KIES
- Tried all the USB ports I got on my PC
- Opened ODIN with Administrator rights
- Restarted my PC, my phone, cleared all cache and **** on my phone.
- USB debugging off (and on)
- used different versions of ODIN
It doesn't recognize the phone when it's booted too, but it does recharge my phone .
It only recognizes my phone when it's turned off and I plug in the cable (the usb sound on my PC).
Kinda desperate of this problem right now, lol.
thanks
Do you have access to CWM to try to flash a different Kernel i.e. Siyah?
Go to boot loader in sg2 then go to odin in pc & connect the usb to phone
Sent from my GT-I9100 using Tapatalk 2
fxa5209 said:
Do you have access to CWM to try to flash a different Kernel i.e. Siyah?
Click to expand...
Click to collapse
Yes, but I don't see why that would help?
Go to boot loader in sg2 then go to odin in pc & connect the usb to phone
Click to expand...
Click to collapse
Umm, that's the whole point here. Until there I get stuck...
sebas156 said:
Hi,
First of all, I've been searching for this problem. And up to now, I haven't found a solution yet.
Odin won't recognize my phone in download mode. I am on Hydrog3nics ROM right now, but I want to go back to stock (I need to send my phone for repair, because of dust under my camera lens).
Things I've tried:
- Reinstalled my drivers with KIES
- Tried all the USB ports I got on my PC
- Opened ODIN with Administrator rights
- Restarted my PC, my phone, cleared all cache and **** on my phone.
- USB debugging off (and on)
- used different versions of ODIN
It doesn't recognize the phone when it's booted too, but it does recharge my phone .
It only recognizes my phone when it's turned off and I plug in the cable (the usb sound on my PC).
Kinda desperate of this problem right now, lol.
thanks
Click to expand...
Click to collapse
Another option is a different cable. I have one cable that does recognize and one that doesn't.
Sent from my GT-I9100 using XDA
mattyh77 said:
Another option is a different cable. I have one cable that does recognize and one that doesn't.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I only got one cable: the out-of-the-box cable..
It should work fine i hope
do you try with the "windows xp compatibility" option?
sebas156 said:
Hi,
First of all, I've been searching for this problem. And up to now, I haven't found a solution yet.
Odin won't recognize my phone in download mode. I am on Hydrog3nics ROM right now, but I want to go back to stock (I need to send my phone for repair, because of dust under my camera lens).
Things I've tried:
- Reinstalled my drivers with KIES
- Tried all the USB ports I got on my PC
- Opened ODIN with Administrator rights
- Restarted my PC, my phone, cleared all cache and **** on my phone.
- USB debugging off (and on)
- used different versions of ODIN
It doesn't recognize the phone when it's booted too, but it does recharge my phone .
It only recognizes my phone when it's turned off and I plug in the cable (the usb sound on my PC).
Kinda desperate of this problem right now, lol.
thanks
Click to expand...
Click to collapse
Have you tried clearing "Dalvik Chache" ? for me it worked. To clear Dalvik cache , Reboot into recovery mode Go to Adavanced -> from there select "Clear Dalvik Cache".
I am on CyanogenMod 10 by the way.
All the best
Did you try Mobile Odin? You just put the rom/kernel on the SD card. Select and flash away!! I use it all the time.
I was in download mode and somehow my phone turned off and now it's stuck on firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
My samsung kies will not reconize it. What do I do Now? Please help!
Put your phone in download mode and flash with the stock rom for your device which can be found in the general forum. You probably had the issue because you didnt clear your cache in recovery mode before flashing.
It's probably a bad connection between your phone and computer, swap usb cables, usb Ports on pc make sure it's a back port, not one on front.
You don't have to clear caches in revenger before using a computer based fishirng utility
I cannot put it in download mode..
A jig well force download mode
Send it to me I'll fix it for you, just pay return shipping
Hello,
I have very odd issue with a S3 I got from my neighbour.
He brought this phone to one of those famous "Phone" Unlock shops here in Vienna,AT.
Well this guys rooted and made something wrong that even Samsung Update said it was very bad modified rom.
So I flashed the first the orignial Open Austria 4.1.2 Version and then 4.3 from December.
1.) I9300XXEMG4_I9300ATOEMG2_I9300XXEMG4 + Factory Reset
2.) I9300XXUGND1_I9300ATOGNC1_I9300XXUGNA8 + Factory Reset after flash
It start normal and when i connect it via usb to my PC it makes sound but MTP is not coming up on the phone neither the USB Debugging even tho I enabled that.
My S3 is not having this issue when I connect it Kies3 and device manager will detect it. Same cable, same usb port same drivers.
I also already tried to set URAT/USB *#7284# and checked also the setting of *#9090# but nothing wrong same as mine.
What else I could check ..I mean when i start it in download mode odin will detect it..if I start recovery mode nothing happens with seem the ADB is broken as well.
Any Ideas?
Thanks in advance
No one has an idea?
Nobody has an idea?
Hello. I have a bootloop I think...or hard bricked device. I gave a wipe data reset, cache, dalvik cache, after reboot , I enter in the configuration of software . After 5-10 sec. the phone restarts and is blocked on samsung logo. For flashing with new firmware via odin, i don t have chances because usb device is not recognized...I tried other usb cables, I have driver for the device, all methods I tried...still is not recognized. I tried on another PCs. show the same thing. Any sugestions?
Nixetro said:
Hello. I have a bootloop I think...or hard bricked device. I gave a wipe data reset, cache, dalvik cache, after reboot , I enter in the configuration of software . After 5-10 sec. the phone restarts and is blocked on samsung logo. For flashing with new firmware via odin, i don t have chances because usb device is not recognized...I tried other usb cables, I have driver for the device, all methods I tried...still is not recognized. I tried on another PCs. show the same thing. Any sugestions?
Click to expand...
Click to collapse
What Android version?
what rom?
what kernel?
if you expect us to magically know every hardware/software specifics of your phone then you got another thing coming.
Nixetro said:
Hello. I have a bootloop I think...or hard bricked device. I gave a wipe data reset, cache, dalvik cache, after reboot , I enter in the configuration of software . After 5-10 sec. the phone restarts and is blocked on samsung logo. For flashing with new firmware via odin, i don t have chances because usb device is not recognized...I tried other usb cables, I have driver for the device, all methods I tried...still is not recognized. I tried on another PCs. show the same thing. Any sugestions?
Click to expand...
Click to collapse
Are you sure that you've installed the driver correctly? Check in device manager and you should see your phone in device manager (if your PC even detects your phone). You should install the usb driver manually by downloading the samsung usb drivers and then ODIN should be able to detect your phone. If your PC can not even recognise the device, there is a chance that the phone's usb port is stuffed up, so you will have to repair it before fixing your phone.