Hey guys. I own the Samsung galaxy sIII (gt i9300) . I have very recently rooted it and installed cyanogenmod 10.1.
Now the cyanogenmod is nice but it still has a lot of bugs and it lacks in a lot of aspects in comparison to the stock rom (i.e. touchwiz) as touchwiz has a lot of nifty features like smart view, smart stay , multi window etc
Now i would like to unroot my device and go back to the stock rom which was jb 4.1.2 .
Is it possible to downgrade from 4.2 to 4.1.2 ?
if yes then a complete tutorial would be highly appreciated for my problem . Thanks in advance. :laugh:
Yes, it's possible to go back, and for ease, I recommend wiping the FULL internal storage. You can always flash a 4.1.2 rom with Odin for PC.
It's not necessary to unroot just because you want to go back to the stock firmware. Or do you want to be able to get FOTA's?
1. Go here and select your OS, phone and region and then download the corresponding firmware: http://www.sammobile.com/firmware/?page=3
2. Unpack it with WinRAR, 7zip or what you use.
3. Unpack the "Odin_3.04 files.zip" or whatever zip is alongside the odin tar file.
4. Boot your phone into download mode by holding Power+Home+Down button until the download mode appears, select yes/continue to go to the actual download/ODIN mode
5. Open ODIN and check if your phone's found. There should be a blue windows with some text in it like "COM:0" and that it says "connected" or "found" in the output window.
6. Click the PDA button and add your tar file which you extracted,¨
7. Make sure that "F. Reset Time" and "Auto Reboot" both are ticked an NO OTHER BUTTON WHATSOEVER!
8. When your firmware has successfully flashed and your phone reboots, force it to reboot into recovery mode by pressing and holding power+home+volume up and in the recovery select to factory reset by formatting/wiping data. BEWARE: This will format your entire internal memory, but is actually worth it when going from 4.2 to 4.1.2 since 4.2 has a different internal structure.
Sorry for threadjack, but i posted something almost identical to this 6 min after your thread
Interested in the solution
you'll also lose root access by going back to a stock rom.
thegh0sts said:
you'll also lose root access by going back to a stock rom.
Click to expand...
Click to collapse
If you had read the entire OP, you'd have seen he actually wants to unroot.
Theshawty said:
Yes, it's possible to go back, and for ease, I recommend wiping the FULL internal storage. You can always flash a 4.1.2 rom with Odin for PC.
It's not necessary to unroot just because you want to go back to the stock firmware. Or do you want to be able to get FOTA's?
1. Go here and select your OS, phone and region and then download the corresponding firmware:
2. Unpack it with WinRAR, 7zip or what you use.
3. Unpack the "Odin_3.04 files.zip" or whatever zip is alongside the odin tar file.
4. Boot your phone into download mode by holding Power+Home+Down button until the download mode appears, select yes/continue to go to the actual download/ODIN mode
5. Open ODIN and check if your phone's found. There should be a blue windows with some text in it like "COM:0" and that it says "connected" or "found" in the output window.
6. Click the PDA button and add your tar file which you extracted,¨
7. Make sure that "F. Reset Time" and "Auto Reboot" both are ticked an NO OTHER BUTTON WHATSOEVER!
8. When your firmware has successfully flashed and your phone reboots, force it to reboot into recovery mode by pressing and holding power+home+volume up and in the recovery select to factory reset by formatting/wiping data. BEWARE: This will format your entire internal memory, but is actually worth it when going from 4.2 to 4.1.2 since 4.2 has a different internal structure.
Click to expand...
Click to collapse
Okay and just to double check, theres no need of using nandroid backup right? because i read it somewhere that if you downgrade from 4.2 to 4.1.2 then the phone goes into an endless bootloop
shabzee said:
Okay and just to double check, theres no need of using nandroid backup right? because i read it somewhere that if you downgrade from 4.2 to 4.1.2 then the phone goes into an endless bootloop
Click to expand...
Click to collapse
and i am not really interested in unrooting, so triangle away is not necessary?
shabzee said:
and i am not really interested in unrooting, so triangle away is not necessary?
Click to expand...
Click to collapse
Only use triangle away if you're gonna send the phone in for repair.
err so if you flash a stock rom via ODIN over CM10.1 that's not unrooting? when you flash a stock rom you do lose root access. i've flashed my S3 back to ICS and JB a few times to get the damn firmware changes i needed and every time i wanted to go back to CM10.1 I had to reroot the phone.
thegh0sts said:
err so if you flash a stock rom via ODIN over CM10.1 that's not unrooting? when you flash a stock rom you do lose root access. i've flashed my S3 back to ICS and JB a few times to get the damn firmware changes i needed and every time i wanted to go back to CM10.1 I had to reroot the phone.
Click to expand...
Click to collapse
Durr, obviously it removes root as it overwrites the system and the stock firmware you're flashing doesn't have the root files in there. However, if you use mobile odin as I use, you have an option to let it root for you.
Theshawty said:
Yes, it's possible to go back, and for ease, I recommend wiping the FULL internal storage. You can always flash a 4.1.2 rom with Odin for PC.
It's not necessary to unroot just because you want to go back to the stock firmware. Or do you want to be able to get FOTA's?
1. Go here and select your OS, phone and region and then download the corresponding firmware: http://www.sammobile.com/firmware/?page=3
2. Unpack it with WinRAR, 7zip or what you use.
3. Unpack the "Odin_3.04 files.zip" or whatever zip is alongside the odin tar file.
4. Boot your phone into download mode by holding Power+Home+Down button until the download mode appears, select yes/continue to go to the actual download/ODIN mode
5. Open ODIN and check if your phone's found. There should be a blue windows with some text in it like "COM:0" and that it says "connected" or "found" in the output window.
6. Click the PDA button and add your tar file which you extracted,¨
7. Make sure that "F. Reset Time" and "Auto Reboot" both are ticked an NO OTHER BUTTON WHATSOEVER!
8. When your firmware has successfully flashed and your phone reboots, force it to reboot into recovery mode by pressing and holding power+home+volume up and in the recovery select to factory reset by formatting/wiping data. BEWARE: This will format your entire internal memory, but is actually worth it when going from 4.2 to 4.1.2 since 4.2 has a different internal structure.
Click to expand...
Click to collapse
I have CM 10.1 with CWM Recovery. How to go back to complete stock to get FOTA? What has to done for that?
Can i downgrade cyanogenmod 10.1(4.2.2) to cyanognmod 10(4.1.2) by just flashing through cwm? Been having problems with my headphones during viber,skype and phone calls woth my samsun galaxy tab 2 p3100. The person im callin cannot hear me. And after removing, the problem persist until u reboot and goes back to normal.
yes. wipe data
Wow...a bit confused here
So, if I'm running CM 10.1 and want to go back to stock rom, rooted. I can't just clear cache/dalvik and flash the CWM recovery-lte-sgs3-sprint-v5.zip then flash Galaxy-s-fre3-md4firmaremodemAIO.zip ??
[email protected] said:
So, if I'm running CM 10.1 and want to go back to stock rom, rooted. I can't just clear cache/dalvik and flash the CWM recovery-lte-sgs3-sprint-v5.zip then flash Galaxy-s-fre3-md4firmaremodemAIO.zip ??
Click to expand...
Click to collapse
This is the 9300 forum. Sprint s3 is a different phone
Sent from my GT-I9300 using Tapatalk 2
I was aware but unaware
rootSU said:
This is the 9300 forum. Sprint s3 is a different phone
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I was aware it was the I9300 forum, but I had hoped it was a basic enough question.
[email protected] said:
I was aware it was the I9300 forum, but I had hoped it was a basic enough question.
Click to expand...
Click to collapse
It's not. How would we know anything about:
recovery-lte-sgs3-sprint-v5.zip
or
Galaxy-s-fre3-md4firmaremodemAIO.zip
?
Back to the basics
rootSU said:
It's not. How would we know anything about:
recovery-lte-sgs3-sprint-v5.zip
or
Galaxy-s-fre3-md4firmaremodemAIO.zip
?
Click to expand...
Click to collapse
Maybe because it is the basic recovery file and firmware file.
Hi
Hello, I have a galaxy s3 (gt-i9300) and I am running aokp mr 1 milestone 1 on 4.2.2, I would like to unroot and flash back the stock rom, luckily I made a nandroid and it is on my pc, could someone please explain all the instructions and procedures to me if they could because I'm a real noob to this and still know very little about everything, thanks you so much
Regards
Nick,
read the thread
Related
I'm just about to sell my Galaxy S2 so just wondering how to revert it to stock? It's currently on CheckROM v6.
Cheers
...
MistahBungle said:
In CWRecovery; format cache, data, system, & internal sd card. In Odin, flash stock rom. Then jig or Triangle Away to reset flash counter. Done. That's what I'd do if I was selling it or sending it in for warrant service.
Click to expand...
Click to collapse
You missed a point. Triangle Away needs root. So use it first, then do all the other steps
Sent from my GT-I9100 using Tapatalk 2
Also you can be sure everything is stock as per youor country/region, if Samsung Kies recognizes your phone and says "Update available" or "This is the latest firmware".
I've found the guide to restore to stock firmware here:
http://www.androidnz.net/2012/01/restoring-your-samsung-galaxy-s2-back.html
And the list of stock firmwares here:
http://forum.xda-developers.com/showthread.php?t=1075278
Just one n00b question, though.. How do I know which stock ROM to flash on to the phone? I'm in Australia and it came from Vodafone stock (but was unlocked).
Regards.
jonno92 said:
I've found the guide to restore to stock firmware here:
http://www.androidnz.net/2012/01/restoring-your-samsung-galaxy-s2-back.html
And the list of stock firmwares here:
http://forum.xda-developers.com/showthread.php?t=1075278
Just one n00b question, though.. How do I know which stock ROM to flash on to the phone? I'm in Australia and it came from Vodafone stock (but was unlocked).
Regards.
Click to expand...
Click to collapse
I looked for the CSC for Australia and it's XSA, so any device in Australia would I guess be that. The firmware below is single CSC, so it's only for Australia. It's Android 2.3.6 Unbranded.
GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXKI
Steps to flashing back to stock:
1. If you've got the yellow triangle, remove it with Triangle Away..
2. Put the phone into download mode (volume down + home button + power button)
3. Open Odin v1.85 You'll see in the white box when the device is plugged in and also in download mode a message saying "Added!"
4. Select the firmware you downloaded, extract to to see the GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXK.tar.md5 file.
5. Select PDA in Odin, select the file you now extracted.
6. Start flashing.
PS. You need to wipe/data cache after doing this or before else you'll be stuck in a bootloop. That can either be done in CWM, or the stock recovery.
Odin will take about 2 minutes for the whole process and you'll be back to stock.
Hope I helped.
nicholas1520 said:
I looked for the CSC for Australia and it's XSA, so any device in Australia would I guess be that. The firmware below is single CSC, so it's only for Australia. It's Android 2.3.6 Unbranded.
GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXKI
Steps to flashing back to stock:
1. If you've got the yellow triangle, remove it with Triangle Away..
2. Put the phone into download mode (volume down + home button + power button)
3. Open Odin v1.85 You'll see in the white box when the device is plugged in and also in download mode a message saying "Added!"
4. Select the firmware you downloaded, extract to to see the GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXK.tar.md5 file.
5. Select PDA in Odin, select the file you now extracted.
6. Start flashing.
PS. You need to wipe/data cache after doing this or before else you'll be stuck in a bootloop. That can either be done in CWM, or the stock recovery.
Odin will take about 2 minutes for the whole process and you'll be back to stock.
Hope I helped.
Click to expand...
Click to collapse
That's fantastic, thanks so much for that Nicholas. I'll give that a go once my sluggish internet decides to download the file! Have a good weekend mate. :good:
Okay, so I can't install TriangleAway apk. I've tried putting it on my SD card and flashing it from CWM, and also by flashing it straight from the internet explorer on my phone.
When I look at TriangleAway in Google Play it says:
Your device isn't compatible with this version
Click to expand...
Click to collapse
Any ideas?
jonno92 said:
Okay, so I can't install TriangleAway apk. I've tried putting it on my SD card and flashing it from CWM, and also by flashing it straight from the internet explorer on my phone.
When I look at TriangleAway in Google Play it says:
Any ideas?
Click to expand...
Click to collapse
Any ideas, guys? I've got someone buying my phone in the next 2 days and need to revert it back to stock and remove all my data from it! :fingers-crossed:
...
Thanks for the quick reply.
I just tried Mounting /System and installing the .apk from Root Explorer and I still get the same parsing error.
Is there a different TriangleAway version I could download perhaps?
Cheers for the assistance.
I think if you flash stock firmware with Odin you do not get a yellow triangle.
...
Revert to Stock from CM9
I have an International Galaxy S2 i9100 and have been using cm9 for quite some and i would like to revert/restore back to stock rom.....
Can someone please help as to steps to go about for safe restore to stock rom.
Thanks in advance
Ketan
Is it possible to restore a stock rom onto my S2 without using the USB port/ODIN?
My S2 has a faulty USB port that only works for charging (sometimes if I wiggle the cable around), cannot transfer data over the usb cable at all and will not connect to my pc so doubt it is going to work with ODIN.
I can transfer files to the phone using airdroyd and can flash using Rom Manager, will this return it to the standard rom if I flash the correct ROM onto it?
Is there anything else I need to do?
Thanks
sc00bs said:
Is it possible to restore a stock rom onto my S2 without using the USB port/ODIN?
My S2 has a faulty USB port that only works for charging (sometimes if I wiggle the cable around), cannot transfer data over the usb cable at all and will not connect to my pc so doubt it is going to work with ODIN.
I can transfer files to the phone using airdroyd and can flash using Rom Manager, will this return it to the standard rom if I flash the correct ROM onto it?
Is there anything else I need to do?
Thanks
Click to expand...
Click to collapse
Yes, you can.
Use Mobile Odin app (requires root). It works like Odin, but u don't need a PC for that!
And avoid using ROM Manager. Many people have had issues using it before.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Yes, you can.
Use Mobile Odin app (requires root). It works like Odin, but u don't need a PC for that!
And avoid using ROM Manager. Many people have had issues using it before.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks u Kindly
Revert to stock recovery
nicholas1520 said:
I looked for the CSC for Australia and it's XSA, so any device in Australia would I guess be that. The firmware below is single CSC, so it's only for Australia. It's Android 2.3.6 Unbranded.
GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXKI
Steps to flashing back to stock:
1. If you've got the yellow triangle, remove it with Triangle Away..
2. Put the phone into download mode (volume down + home button + power button)
3. Open Odin v1.85 You'll see in the white box when the device is plugged in and also in download mode a message saying "Added!"
4. Select the firmware you downloaded, extract to to see the GT-I9100_XSA_I9100XWKK2_I9100XSAKK1_I9100XXK.tar.md5 file.
5. Select PDA in Odin, select the file you now extracted.
6. Start flashing.
PS. You need to wipe/data cache after doing this or before else you'll be stuck in a bootloop. That can either be done in CWM, or the stock recovery.
Odin will take about 2 minutes for the whole process and you'll be back to stock.
Hope I helped.
Click to expand...
Click to collapse
Well, if i have CWM installed, will flashing stock firmware update my CWM recovery to stock recovery or not? If not, how can I restore my CWM recovery to stock recovery?
ssanjy said:
Well, if i have CWM installed, will flashing stock firmware update my CWM recovery to stock recovery or not? If not, how can I restore my CWM recovery to stock recovery?
Click to expand...
Click to collapse
Yes, it will revert your recovery to stock.
Hi guys
I'd like to do a factory restore to stock (full wipe) from rooted Vanilla Rootbox ROM V4.2 (JB 4.2.2) Do I just reflash a stock ROM from SamMobile?
I've been flashing custom ROMs for a while but something is screwy and unstable now and I get a "UID errors" message on boot-up so I want to start from scratch, then reroot and reload the custom ROM again.
Many thanks in advance.
Hi all,
I've been having a few issues with my S2 (Randomly resetting, freezing, etc) - so I decided to do a factory reset - but it hasn't worked.
When I turn my phone on, it wont go past the galaxy logo. I've tried holding down VOLUME UP, POWER, and HOME - but it doesn't boot it into recovery mode.
I've downloaded odin (the phone is rooted) and was told to download a new ROM and then use the PDA button on odin. But the only file type it expects is MD5, tar and SMD. Whenever I download a ROM, I just get a ZIP?
I'm probably being stupid. Could someone point me in the right direction? I don't care if I lose data, I just want the phone working.
Wazza26 said:
Hi all,
I've been having a few issues with my S2 (Randomly resetting, freezing, etc) - so I decided to do a factory reset - but it hasn't worked.
When I turn my phone on, it wont go past the galaxy logo. I've tried holding down VOLUME UP, POWER, and HOME - but it doesn't boot it into recovery mode.
I've downloaded odin (the phone is rooted) and was told to download a new ROM and then use the PDA button on odin. But the only file type it expects is MD5, tar and SMD. Whenever I download a ROM, I just get a ZIP?
I'm probably being stupid. Could someone point me in the right direction? I don't care if I lose data, I just want the phone working.
Click to expand...
Click to collapse
What ROM do you want to flash?
If it's a stock ROM, then extract the zip file and flash the contained tar/md5 file with Odin.
If it is a custom ROM and only provided as CWM-flashable zip file, then use a stock ROM to flash first and flash the custom ROM afterwards, when everything works again.
Here you can get the latest stock ROMs => http://forum.xda-developers.com/showthread.php?t=1544487, or pre-rooted stock ROMs from here => http://forum.xda-developers.com/showthread.php?t=1608071, or use Check Fus Downloader from here => http://fus.nanzen.se/ to check for the latest officiallly released firmware versions for your phone in your region and download it directly from Samsung servers.
It_ler said:
What ROM do you want to flash?
If it's a stock ROM, then extract the zip file and flash the contained tar/md5 file with Odin.
If it is a custom ROM and only provided as CWM-flashable zip file, then use a stock ROM to flash first and flash the custom ROM afterwards, when everything works again.
Here you can get the latest stock ROMs => http://forum.xda-developers.com/showthread.php?t=1544487, or pre-rooted stock ROMs from here => http://forum.xda-developers.com/showthread.php?t=1608071, or use Check Fus Downloader from here => http://fus.nanzen.se/ to check for the latest officiallly released firmware versions for your phone in your region and download it directly from Samsung servers.
Click to expand...
Click to collapse
Hi,
Thanks for the reply. I don't care which ROM I use - As long as I get the phone working again. I did download 7comp ROM but I couldn't find any .tar files?
I also converted the ZIP to a TAR but odin isn't picking it up ?!
OK - I've downloaded and installed the latest stock ROM you posted.
It seems to have installed, but doesn't go past the splash screen which says samsung galaxy Sii
Any ideas?
[EDIT] - Phone fixed. I was able to load it into recovery mode and cleared cache. woo
Well done ...now try to go on recovery mode ...if should be able to go....do full wipe...then clear delvik cache...then advance- fix permission ..
Then reboot system ....you are done...
Don't forget to say thanks..
Sent from my GT-I9100 using xda premium
Attempted to root the phone but it didn't work.
I followed a set of instructions, and was asked to wait for the phone to reboot. It now has the "!" rooted icon but won't go past the rooted screen.
System restore and clearing cache doesn't set it back to factory default. Any ideas?
Wazza26 said:
Attempted to root the phone but it didn't work.
I followed a set of instructions, and was asked to wait for the phone to reboot. It now has the "!" rooted icon but won't go past the rooted screen.
System restore and clearing cache doesn't set it back to factory default. Any ideas?
Click to expand...
Click to collapse
May i know what u did???
xDa_nightfury said:
May i know what u did???
Click to expand...
Click to collapse
Sorry for late reply. I followed a video on youtube showing you how to root the phone. It looked succesfull as the "!" did appear, but it wouldn't go past that.
So I rolled it back using the original ROM and have given up on rooting it. It's a shame as I really liked Jelly Bean
Wazza26 said:
Sorry for late reply. I followed a video on youtube showing you how to root the phone. It looked succesfull as the "!" did appear, but it wouldn't go past that.
So I rolled it back using the original ROM and have given up on rooting it. It's a shame as I really liked Jelly Bean
Click to expand...
Click to collapse
to root ur phone, just dwnld the .tar file of Siyah v4.1.5 fro the link below, then put ur phone into Dwnld mode and connect to ODIN in ur PC and flash by putting the siyah kernel file(.tar) in PDA section, ur phone will be rooted
http://www.gokhanmoral.com/gm/2012/09/08/siyahkernel-s2-v4-1/
PS- do see that u dwnld the file meant to flash by ODIN ie Download tar (for Odin)
Just flash a siyah v.4 rooted kernel through odin.
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
nbarr7655 said:
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
Click to expand...
Click to collapse
Which siyah did you flash. The one you want is called AJK now
122ninjas said:
Which siyah did you flash. The one you want is called AJK now
Click to expand...
Click to collapse
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
nbarr7655 said:
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
Click to expand...
Click to collapse
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Phalanx7621 said:
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Click to expand...
Click to collapse
I can't get into recovery. I simply cant. I hold the buttons, correctly might I add, and then the logo appears, then goes away and I am left with nothing but a blank, black screen. The bottom buttons aren't even lit.
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Phalanx7621 said:
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Click to expand...
Click to collapse
If you could link me a Siyah kernel that is in a .tar format I would be appreciative.
Dude do as Phalanx says. Vol up+Vol down+ Power and even after the logo goes away dont release the buttons. Recovery will show up.
Sent from my SGH-I777 using xda premium
Either that or if you get adb up an running on your computer, hook up your phone via usb and type (this is for mac, may be slightly different for other os's):
adb root
adb reboot recovery
and voila! your phone boots up in recovery!
can't get past boot screen on siyah 5.0.1
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
kurtisherzog88 said:
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
Click to expand...
Click to collapse
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
creepyncrawly said:
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
Click to expand...
Click to collapse
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
kurtisherzog88 said:
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
Click to expand...
Click to collapse
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
creepyncrawly said:
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
Click to expand...
Click to collapse
Wow, excellent information and I cannot thank you enough for taking the time to help me out. My last question hopefully, and I don't mean to try your patience but what is the best way, would you recommend, to root my phone? I did it with flamaroot previously but it was temporary? Thanks!
Kurt
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
creepyncrawly said:
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I read somewhere that flamaroot was not permanent. Anyway, did exactly as you said and everything is working perfectly!! I seriously can't thank you enough for working with me. Trying SuperNexus to start but this is amazing!!
Kurt
phone completely frozen
hey guys
recently i've just got a 4.4 kitkat rom for my gt-s5300 and it worked preety well.
but i've downloaded a kernel rom(NeohmKernel_v1_s5301_OhmPsy.zip) that i didn't know that it wasn't compatible with my phone and now it stucked in boot screen. i've turned it on and wait for 2 hours if maybe it will work, but the phone still stucked in boot screen.
i've tried to fix this by pressing power+up vol but didn't work
pls help. it's my only phone i've got(but i know this phone is sh*tty)
-Mamelic
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
gaurav gaba said:
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
---------- Post added at 06:07 AM ---------- Previous post was at 05:35 AM ----------
Kotkot_Mamelic15 said:
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
Click to expand...
Click to collapse
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Kotkot_Mamelic15 said:
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Click to expand...
Click to collapse
First off, this forum is not for your phone, it is for the SGH-I777 AT&T Galaxy SII, so we don't know the specifics of your phone.
Following the above procedure will put your phone into download mode, where you can flash the firmware you linked.
Since you say you don't know how to use it, I am going to post a complete set of instructions for using Odin that I wrote some time ago. Bear in mind that this is for the I777, and you will have to adjust some things to make it work for your phone. Refer to the flashing instructions in the thread you linked.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) 3.) 4.) Put your phone into download mode.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
If after the successful flash your phone does not boot into the firmware, then perform a hard reset. I don't know your phone, but normally you would boot into recovery and perform a wipe data/factory reset.
Hi, my P7500 3G is currently on a custom ROM running 4.4.2, and I would like to unroot it and downgrade back to 3.2 or 4.0.4 stock as I am planning to sell it off. But if I recall correctly, repartitioning was required when the jump to 4.2 was made. So how will this affect me if I am trying to downgrade it?
Thank in advance!
Just download the correct tar.md5 files from Sammobile and flash it using Odin then access stock recovery and perform a factory reset and reboot. You should be good to go, that's the way I downgrade my tab and I don't see any abnormalities.
SystemDoctor said:
Just download the correct tar.md5 files from Sammobile and flash it using Odin then access stock recovery and perform a factory reset and reboot. You should be good to go, that's the way I downgrade my tab and I don't see any abnormalities.
Click to expand...
Click to collapse
As long as the stock rom and stock recovery files are correct, there should not be any issues? I will try to flash using ODIN for rom, previously tried to flash using cwm, but keep getting an error..
Yes as long as the files for the device are correct, go on and continue and CWM doesn't support tar.md5 and you may want to look at the deepsleep for the p7500 for a better battery life. Here's a link: http://forum.xda-developers.com/showthread.php?p=39906672
ZerReaper said:
As long as the stock rom and stock recovery files are correct, there should not be any issues? I will try to flash using ODIN for rom, previously tried to flash using cwm, but keep getting an error..
Click to expand...
Click to collapse
Just that all your files will be in a "0" folder because of the sdcard changes in 4.2. You would have to manually move them out of the 0 folder. But since you're planning to sell it, you can just wipe your internal memory in recovery.
eushaun99 said:
Just that all your files will be in a "0" folder because of the sdcard changes in 4.2. You would have to manually move them out of the 0 folder. But since you're planning to sell it, you can just wipe your internal memory in recovery.
Click to expand...
Click to collapse
Okay, just wanna let you guys know that I have successfully flash back to stock using ODIN. The first time I did it, the device was stuck at the Samsung logo. I waited until about 45 minutes and decided to force restart and enter recovery to wipe data and cache. After which, the device was able to boot successfully into Android.
Thank you for all your help!
I*have an android version 2.3.4 and does not search for me and yet sgsII update has already JB long. What to do to have searched this update? CSC changed even with the KOR on the XEO and still nothing ... Please help!
DarNex said:
I*have an android version 2.3.4 and does not search for me and yet sgsII update has already JB long. What to do to have searched this update? CSC changed even with the KOR on the XEO and still nothing ... Please help!
Click to expand...
Click to collapse
If you are having trouble to search for the latest updates for your s2, I suggest going on samfirmware and search for the latest update(google it, open the website, click check for firmware and select details accordingly.). You will need to make a samfirmware account but after that, you can download the file. The .zip file that you download must be flashed with ODIN.
If you don't know how to install this .zip file using odin, follow these steps:
1. Extract the download firmware making sure that you extract the .tar file from the .zip
2. Open ODIN, if you haven't downloaded it yet, google it and click the xda link.
3. Plug in you phone into your computer making sure it is in download mode (press and hold volume down, home, power)
4. Click on the PDA button and locate the .tar firmware file and select it.
5. Click start
6. Once it says successful, your phone will reboot. Quickly make your phone boot into recovery mode(volume up, home, power)
7. Once you are in the recovery menu, navigate the menu with volume buttons and select and confirm factory reset and wipe cache partition (this will delete your apps, but your files will be kept.
8. Reboot your phone then voila, your phone has the latest stock firmware!
I*can not use Odin because my computer does not search the phone.
DarNex said:
I*can not use Odin because my computer does not search the phone.
Click to expand...
Click to collapse
Even on download mode? If yes, I suggest using mobile odin and download the files, then put the on your phones internal memory. You should try custom stock roms like Neat rom since a lot of the bloat ware from samsung can be removed. I think to do both steps, your phone needs to be pre-rooted. So you will need to download an app that will root your phone. Search on xda (and search on google) for easy root methods or root app. With custom rom method (and after rooting your phone), you will need to install it using CWM or TWRP recovery (volume up, home, power)
But I do not know how to make root android 2.3.4 without a computer.
DarNex said:
But I do not know how to make root android 2.3.4 without a computer.
Click to expand...
Click to collapse
Easy, just download the root app( try framaroot) on xda using your phone and install that app, making sure unknown sources are allowed, then run it, tap the required exploit then, you're done. You can download the custom rom using your phone too. But, if you don't want to use your computer, this will take longer to do. Since your phone is now rooted, you can also use mobile odin too! For custom stock rom (4.1.2 neat rom), you will need to use rom manager, download the latest recovery for s2 then install it. After, you need to download a Jelly bean kernel onto your phone's internal storage (search for apolo kernel by Pedestre), then download the custom rom into your phones internal storage. Using the steps I've said before, go into recovery mode, then:
Press install from zip, select whichever storage location you downloaded your files in, select the JB kernel, then once it installs, your phone will reboot. You will notice your phone will not boot properly and will restart back into the recovery. Once booting back into recovery, install the neat rom zip file and then the aroma installer will pop up with all the options you can choose from.
I can not use the computer because the computer does not detect the phone. And I'd like to stock JB 4.1.2, does not want a custom rom. and how to write it stock JB by mobile odin? And if mobil odin must be PRO or lite?
DarNex said:
I can not use the computer because the computer does not detect the phone. And I'd like to stock JB 4.1.2, does not want a custom rom. and how to write it stock JB by mobile odin? And if mobil odin must be PRO or lite?
Click to expand...
Click to collapse
Then you will still need to do the rooting of your phone. When you download the stock official rom from a website like samfirmware (onto your phones internal storage), you will need to extract it with rar for android (you need to extract the .tar file). Then you basically need to open the odin mobile app, select the pda file then your phone should do install the stock rom. Sorry about saying to download mobile odin from the play store, I forgot chainfire (the dev) made it so you needed to download the .apk file from xda: http://forum.xda-developers.com/attachment.php?attachmentid=2719771&d=1398965576 The one on the play store was an optional payment to support the dev.
I'll try. Is odin mobile is safe?
DarNex said:
I'll try. Is odin mobile is safe?
Click to expand...
Click to collapse
As long as you select the right file for the right usage. (E.g PDA for phone software, etc) if you follow my steps, your phone should be all good. Just make sure you have enough battery during the process.
what about the bootloader? On another forum I asked was it said that the renovation of GB / ICS to JB need to update the bootloader.
DarNex said:
what about the bootloader? On another forum I asked was it said that the renovation of GB / ICS to JB need to update the bootloader.
Click to expand...
Click to collapse
The boot loader should already come with the stock rom package. When I flashed stock ics on my device, it automatically downgraded the bootloader for me. Note: sometimes, stock firmware packages can have more than one file included, but they have the uses stated at the end of the file name.
So this means that you do not need the bootloader I upgrade I can immediately upload the stock JB?
DarNex said:
So this means that you do not need the bootloader I upgrade I can immediately upload the stock JB?
Click to expand...
Click to collapse
Once again. The bootloader is automatically updated during the upgrade process. No additional steps required to update bootloader. So yes, you can just flash JB immediately.
And if he needs to upload cwm rom for mobile odin?
DarNex said:
And if he needs to upload cwm rom for mobile odin?
Click to expand...
Click to collapse
Sorry. I don't understand what you're saying.
Longer valid ive loaded the system works!