Related
I have the XV6800 and noticed that this phone over times developes some screen spots. I have one so far, and on my previous one that I returned (for other reasons) developed one also.
I read a thread on another website that Moguls / Titans develop it too.
Has any one else Developed this? If so is it fixable or is it something that might cause like sometype of recall and issue a fix where we might get phone replacements later on?
i have a light spot about the size a pea in the screens lower left-hand quadrant. It's noticeable it during the verizon boot-up screen with the white background, in word, etc. anything with a white background. Not noticeable if the screen is colored.
I've wondered if this was normal.
mine's got 3 of them now
same here, my burnin spot is also in the lower left-hand corner the size of a pea.
same here, lower left corner is lighter than the rest of the screen...looks like somebody missed something on QA
themoz said:
i have a light spot about the size a pea in the screens lower left-hand quadrant. It's noticeable it during the verizon boot-up screen with the white background, in word, etc. anything with a white background. Not noticeable if the screen is colored.
I've wondered if this was normal.
Click to expand...
Click to collapse
Yes, mine is in the exact same place. I read on another website that it might be an HTC issue because other TITAN's have gotten these spots also.
At first I thought that a picture image was burnt into my screen or that I might have pressed the screen to heavily and damaged it.
This has happened twice. I wonder if there is a fix because this is very annoying especialy when trying to read or watching a video.
Same Here
I have a pc6800 through Alltel and just noticed the same problem three days ago...has anyone spoken with their SP and found out if they are replacing them?
Killroy8868 said:
I have a pc6800 through Alltel and just noticed the same problem three days ago...has anyone spoken with their SP and found out if they are replacing them? I am afraid to take mine in since my all High and mighty Moister sticker now says void even though my phone hasn't been with in 100 feet of water. I find those stickers to be such BS...but that could just be me...I wish I could find some where to buy spare ones..
Click to expand...
Click to collapse
I am not entirely certain but I think the void sticker that is displayed by the battery is for the screw. I mean if you try to unscrew your phone to fiddle with the insides then that voids your warranty. I could be wrong.
The only concern would be that if we where to return the phone to get a replacement one, that we would have to flash our RADIOS and ROMS to stock if any one has flashed them to anything that is not stock.
The stickers on both of my alltel 6800's said void out of the box. Their explaination for this is the when the sticker get wet the words bleed and turn the entire sticker purple. Not sure how accurate the rep was but that is the story for what it is worth.
shayes5 said:
The stickers on both of my alltel 6800's said void out of the box. Their explaination for this is the when the sticker get wet the words bleed and turn the entire sticker purple. Not sure how accurate the rep was but that is the story for what it is worth.
Click to expand...
Click to collapse
Yep..you are right . The void stickers are good until they turn a solid purple or red...weeehhh...I'm goin to go and replace my phone this week will let you know how it goes..and what they say
Yeah, mine's got a spot the size of a small pea in the bottom left-hand corner. Doesn't bother me too much yet though, I've got the insurance so I'll go get it replaced one of these days. For others that have tried to get them replaced, any troubles?
After doing some research on forums I noticed that many people have this problem.
Some say that it might be an issue with the phone heating up, faulty LCD manufacturing, the excess use of the vibration feature and so on......
But It seems that no matter what you ( such as gettting a replacement) your current or new phone might still get these spots.
It seems that not many carriers know about this issue, not even HTC.
So the problem might consist unless it is made known to them so they can create a fix for the new shipment of phones. Or else this will reoccur on the phones they have shipped out already.
It sucks because most of us paid a large amount of money for these devices to have it be faulty( not something that can be fixed via software at this moment). Just my opinion.
Ditto, same spot here. was wondering about the spot for a while. I have dropped mine a million times and thought it was because of that.
would be nice to be able to change it in because of the spot because mine is beat down to the ground like 4 flat tires.
will they give me crap because of how beat up it is?
I know every time I go to Alltel and get a phone replaced via the insurance the first question they ask the Rep at the store is if the phone looks like it has been dropped or if it has water damage....I'm sure that is so they can blame it on the user. As far as the phone being under manufacturer warranty they usually just swap it out for me no questions asked. I just always hate when they open the box infront of me and give nothing but the phone....would be nice to have an extra case and charger...LOL..
anyone know if sprint good about swapping phones and if i should do insurance or manufacturer warranty and if i do insurace can i switch to touch or you can only change phone in first thirty days
i got 2 spots in lower left corner
Me too (x3)
I've been through three Sprint-branded titans because of this. I'm 100% sure it's a design flaw. If we all complain at once, HTC might actually listen and make a titan that doesn't do this!
I also have two pea-sized spots in the lower left quadrant of the screen. Doesn't really bother me though, as I only notice it when the phone is booting up.
I've got 3 spots lower-lefthand corner as well on my Mogul.
I made a poll to actually see the statistics of the effects of these Spots on the TITAN / 6800
Feel free to Vote
Ok so I am wondering if it's only my phone or if this is a widespread problem. When I use my thunderbolt in the dark, the bottom right and left bleed a lot of light through the casing, and just a little at the bottom. On my Eris, if u turned the screen straight and looked at the phone from above, there was a real big light bleed from behind the home/menu/back/search backlights and it seems that "feature" has been carried onto the thunderbolt. Just need to know if others are experiencing this to see if I should take mine in for a replacement.
Sent from my rooted s-off Thunderbolt
You talking about were the glass meets the bezel? under the soft buttons? Yeah, mine does that too.
Yes exactly that. I was thinking I may be able to cover it up with a case but I don't want to get one just yet cause I just haven't had enough testing the phone to fully determine if I need an extended battery... I'm leaning toward yes but then again I don't think there are any cases for extended batteries yet
smwoodward said:
You talking about were the glass meets the bezel? under the soft buttons? Yeah, mine does that too.
Click to expand...
Click to collapse
Sent from my rooted s-off Thunderbolt
mhmmm. very easy to see if the phone is upside down.
Aw crap, that is disappointing to read!
This was one of the reasons I returned my EVO 4G to Sprint last summer and didn't bother getting a new one. After just 13 days the glass started separating from the bezel and allowed light leakage...which I won't put up with. It was a well known problem in the early days of the EVO, and I don't know if they ever fixed it on later run productions since I stopped following EVO news.
I just checked mine in a very dark room and nothing apparent to me, but now I'm nervous that it will happen in a week or two. I guess time will tell.
I would take it back and ask for a new one. Light leakage also means dust infiltration is more possible in many phones.
I didn't even know it existed until I was messing around with my camera in the dark last night and could see it in the picture. Since then I have come across topics talking about the problem, and I almost feel like more phones have it than don't have it. I am getting tired of exchanging these phones. I started with a skyrocket then exchanged it for another skyrocket after the screen got really scratched up after about 10 hours of owning it and barely even touching it. I then exchanged the second skyrocket for the sg2 because it was $100 cheaper and I read that the sg2 is actually a more powerful phone. I was extremely happy with my choice until I noticed the the screen on my phone appeared to not be set properly. The bottom portion of the screen was about flush with the bezel while the top was recessed into the bezel. This phone was perfect until I came across the spotting issue. This is honestly something I could live with since I will rarely be in a situation where I will see it, but it is annoying that samsung can't get their QC straight. The thought crossed my mind to just get my money back and hope that the nexus comes out.
JaRay said:
I didn't even know it existed until I was messing around with my camera in the dark last night and could see it in the picture. Since then I have come across topics talking about the problem, and I almost feel like more phones have it than don't have it. I am getting tired of exchanging these phones. I started with a skyrocket then exchanged it for another skyrocket after the screen got really scratched up after about 10 hours of owning it and barely even touching it. I then exchanged the second skyrocket for the sg2 because it was $100 cheaper and I read that the sg2 is actually a more powerful phone. I was extremely happy with my choice until I noticed the the screen on my phone appeared to not be set properly. The bottom portion of the screen was about flush with the bezel while the top was recessed into the bezel. This phone was perfect until I came across the spotting issue. This is honestly something I could live with since I will rarely be in a situation where I will see it, but it is annoying that samsung can't get their QC straight. The thought crossed my mind to just get my money back and hope that the nexus comes out.
Click to expand...
Click to collapse
Return it directly to Samsung if you are having that much of a problem, I have never encountered anyone directly who has had the same problem but you do have some recourse to c.y.a.
I'd take it back to the store you got it at, and if they aren't willing to do something you should be able to send it to Samsung to get it repaired/replaced.
Good luck!
JaRay said:
I didn't even know it existed until I was messing around with my camera in the dark last night and could see it in the picture. Since then I have come across topics talking about the problem, and I almost feel like more phones have it than don't have it. I am getting tired of exchanging these phones. I started with a skyrocket then exchanged it for another skyrocket after the screen got really scratched up after about 10 hours of owning it and barely even touching it. I then exchanged the second skyrocket for the sg2 because it was $100 cheaper and I read that the sg2 is actually a more powerful phone. I was extremely happy with my choice until I noticed the the screen on my phone appeared to not be set properly. The bottom portion of the screen was about flush with the bezel while the top was recessed into the bezel. This phone was perfect until I came across the spotting issue. This is honestly something I could live with since I will rarely be in a situation where I will see it, but it is annoying that samsung can't get their QC straight. The thought crossed my mind to just get my money back and hope that the nexus comes out.
Click to expand...
Click to collapse
Never seen any of the issue you speak of, and sold tons of these phones. Have one myself, and again, never seen these issues. No offence, but sounds like your either extremely OCD, or lying to make Samsung look bad.
I had that issue on both phone the second was even worse a thick transparent black line was accros and down the screen. It was worse when I watch Netflix or movies at night. I ended going to Device support center and they order me a new one. This current one has a small blob on the top left but is minimal
So I just leave it.
Sent from my SAMSUNG-SGH-I777 using xda premium
Hi all, newbie here
Just received my shiny new S3 this morning and it's beautiful - haven't had a chance to power it up yet.
Thing is, I'm a complete OCD freak when it comes to my gadgets, and I've noticed that on each of the four corners of my handset (on the bezel) there are small lines that appear to be joinery spots, but I'm not quite sure. At first I thought it was a crack but then realised that there are small lines on each corner, which leads me to believe it is joinery and not cracks. The lines are not that visible but if you focus you can spot them.
Sorry to be so OCD but can anyone else confirm this?
Thank you
Yep, mine has the same. Never noticed before.
You b*****d!!! I have noticed it now!!!
I too have OCD........
johnboywilson said:
You b*****d!!! I have noticed it now!!!
I too have OCD........
Click to expand...
Click to collapse
Haha I am sorry! We can all suffer with our joinery spots together haha
me too, think of it as the design
Probly moulding marks
i noticed em on mine as soon as i got the phone! and i dont have OCD ! LOL.
crappy manufacturing process if you ask me! they could could have moulded it in one piece! should have been made out of metal... the bezel at least!
itoYo said:
i noticed em on mine as soon as i got the phone! and i dont have OCD ! LOL.
crappy manufacturing process if you ask me! they could could have moulded it in one piece! should have been made out of metal... the bezel at least!
Click to expand...
Click to collapse
Saw it right from the moment of unpacking, too... and I don't have OCD neither.
But that barely visible and after a few days with the handset, I'm actually glad it's plastic and not metal... It's softer, warmer, and it will actually absorb shocks better, effectively protecting the screen a tad more. And it's moulded in one piece...Only the mould was not in one piece itself
I noticed mine today which led me here. Thing is i saw a post on the net and the guy had one just below home button and cpw changed the phone for him.
Same lines are on the Galaxy Nexus. I never saw them but my friend dropped his phone and thought he cracked it in those 4 spots. Then he asked me to check mine and sure enough, they were there.
Mine too...............
I have also seen those 4 hair line cracks/joints around all corners on my white S3 this morning. Because I already requested for return and refund from eXpansys-usa.com. so before sending then I want to confirm it, Is it normal?. otherwise they will laugh on me.:silly:
I think the 4 corners are normal, but the other random spots aren't. I ordered mine from Expansys-usa.com too. I don't have the random spots, but do have the 4 corners and they aren't like the one in the picture. They are hard to see unless you look for them. Like it's how the phone is put together.
b-eock said:
I think the 4 corners are normal, but the other random spots aren't. I ordered mine from Expansys-usa.com too. I don't have the random spots, but do have the 4 corners and they aren't like the one in the picture. They are hard to see unless you look for them. Like it's how the phone is put together.
Click to expand...
Click to collapse
Thanks Buddy...
Cracks in Plastic around edge on my Galaxy S3
I noticed a crack near where I plug the charger into the phone. At first I thought it was a seam where the plastic came together so I didn't worry about it. Now I have noticed that the phone has developed several small cracks around the edge (near the volume rocker and at the top corner.). I have never dropped it and have always taken care of it.
Today I did a quick search and found that this is a problem others have reported so I gave Sprint a call to find out what could be done. They said to bring it into the closest sprint store which is 70 miles away. The only other option they gave was to call Samsung. So I did.
Samsung said they could repair the phone but they needed to take my credit card info and would charge me if it was due to damage and I wouldn't have my phone for over a week! Needless to say I am beyond frustrated. I am a loyal Samsung customer... Have 2 galaxy s2 phones ( for my kids) a Tab2 and just got the Note 10.1. I am even considering upgrading to the note II when it comes out. I am completely concerned about the quality of plastic that they are using in this phone and am reconsidering my loyalty.
Guess I have to take it back to sprint when I am close to their store to get anything done without having to give a credit card or be phone less for a week! What a pain in the arse! Should I un-root my phone before doing this to avoid the inevitable "warranty" - issue?
Are there others that have noticed these cracks and gotten any resolution from Samsung or their carriers?
Mine has a crack
sav_uk said:
Hi all, newbie here
Just received my shiny new S3 this morning and it's beautiful - haven't had a chance to power it up yet.
Thing is, I'm a complete OCD freak when it comes to my gadgets, and I've noticed that on each of the four corners of my handset (on the bezel) there are small lines that appear to be joinery spots, but I'm not quite sure. At first I thought it was a crack but then realised that there are small lines on each corner, which leads me to believe it is joinery and not cracks. The lines are not that visible but if you focus you can spot them.
Sorry to be so OCD but can anyone else confirm this?
Thank you
Click to expand...
Click to collapse
i was just wandering never dropped the phone so how could it break but i even saw it with a magnifying glass it is surely a crack
gotta complain samsung to use such a cheap quality product
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
so take it back get it replaced
ofcourseimnaked said:
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
Click to expand...
Click to collapse
Very similar to mine but not quite as bad as what your pic shows. I decided not do anything because it is purely a cosmetic issue and you have to look really hard on mine to see it plus all my parts are aligned spot on so everything is flush with no over hang. If I had yours I would take it back to the store and demand another 32 GB asap. They should have em. 64 GB will take some time to reach stores so I may decide later to exchange.
You have a one year warranty so you could wait too. Remember iPhone 5 had similar quality issues at launch.
Lol, I'm just waiting for mine to come in. I presume I will get one that has a perfect body, but a dead pixel or two, I will then return it for one with a flawless screen, but screwed up body, and then be forced to live with it.
I went to a store to buy mine and made them open the box before I took it
Sent from my M7 using Tapatalk 2
ofcourseimnaked said:
picked up my phone earlier this afternoon, (preorder 32gb) 1st im told that my wireless hdmi will arrive at a later date, when i open up my box once im home i see that the top speaker grill did not adhere properly. only half of it is sitting right (camera side) but the half with the sensors is floating ever-so slightly. i am in love with the phone but this is really bothering me. i can clearly see the red adhesive and some is even on the side of the phone. after a quick phone call to at&t i was told i can go back to the store i which i pre-ordered and recieve a new phone.
picture with the headphone port shows a normal adhered corner and the other shows the gap on the grill
Has anyone else had a problem like this?
Click to expand...
Click to collapse
mine has a very slight gap, similar to yours on the right side, except mine is more uniform. I think it's the fact that it's glued on. personally I'm not worried, but yeah if it bothers you go demand another one. they promised you zero gap construction, if you don't thin theyve met that promise you go back till you get one that does bro.
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Sent from my HTC One X+ using Tapatalk 2
I called AT&T and they told me to go to my nearest store and they would replace it, even if it were a minor cosmetic defect it would still worry me. Even the slightest bit of water could go in through a gap like that and damage anything or even worse activate a water strip forcing you to go through Insurance for such a new phone. They were pleasant and accommodating over the phone, I'm glad it was an easy fix.....
Now I'm just sitting here staring at the phone, it makes no sense to do anything software wise to it because I'm going to return it in the morning..... No fun for me today
Dottcent said:
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Click to expand...
Click to collapse
Not sure about HTC but AT&T will exchange it for you..
Dead pixels is a definite return in my book.
Wow!!I was wondering it's only me or a wide spred issue. Now I know it's not just me. My phone looks perfect at the top but the bottom has imperfections. There is a very slight gap and I can feel the ups and downs when I move my finger around the edges. I think I should go to AT&T sore and see if the replace it.
Dottcent said:
Guys, anyone has dead pixels on their Ones? Got them on two of mine....any idea how many considered defective by HTCs standards?
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
I had the same issue with mine, and the store manager said he would only exchange it if it had three dead pixals. The phone had about five dead pixals but in two different clusters which made it seem like only two pixals, due to the high dpi. The store manager than called att and asked what he should do because he was only able to see two dead spots/pixals. They probably told him it was up to him and that the defective pixals should be clearly seen with the naked eye. He refused to exchange it because he felt uncomfortable not being able to see more than two dead spots/pixals. I tried a different store with much success. Probably because the store manager was so understanding of the issue.
I went to the store and replaced mine. The first one they showed me has the same issue (uneven flow of construction with the bottom speaker top) and pulled another one which still suffers with similar issue but not that evident. I took the second one and left. It looks like the bottom part of the phone is little complex and very wide spread build issue with these phones.
rajbsn said:
I went to the store and replaced mine. The first one they showed me has the same issue (uneven flow of construction with the bottom speaker top) and pulled another one which still suffers with similar issue but not that evident. I took the second one and left. It looks like the bottom part of the phone is little complex and very wide spread build issue with these phones.
Click to expand...
Click to collapse
I've looked at many phones. I have yet to seen one without the small gap. It seems that only some have smaller gaps than others. But make sure your speaker grills are at least align correctly.
Sent from my HTC One using Tapatalk 2
Dreadsteel said:
I've looked at many phones. I have yet to seen one without the small gap. It seems that only some have smaller gaps than others. But make sure your speaker grills are at least align correctly.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Their Display phone was perfect. It looks like they are displaying Apples and selling Oranges.
hey i was finally able to recieve a new phone, i walked into my local at&t and spoke to a rep. i was reffered to the assitant manager who looked at his own phone and refused me a replacement phone. i pressed him and gave my phone to the store manager who only agreed to give me a new unit once she saw the red adhesive showing on my top speaker grill. i went and looked at every display model they had, bottom grill on the phone shows a miniscule gap towards the center of the device. speaker grill on top also shows a gap that is more prominent towards the ir blaster. Not sure if this is normal but i will try to visit other locations even a sprint or t-mobile store and look at the build quality on their versions and take pictures to compare. im not too sure of why something like this should happen, but my 1st guess would be an unlevel surface underneath most likely from the injected plastic... i really hope it isnt, such a beautiful phone. something like this should not have a rushed manufacturing process.
About the gap, I got 3 Ones from Att and they all got tiny gaps, but seem to be glued tight, but I mostly looked at uneven speaker grills and screen, since all had some!
Ps, Double Dip is lovely case, got one with the purchase
Every single One we have sold at my store has has zero gap. I've made it a point to look at each one.
Sent from my HTC One X using xda premium
CraigP17 said:
Every single One we have sold at my store has has zero gap. I've made it a point to look at each one.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I just got my "baby" yesterday. And with trying to entertain a 1 year old with a slight head cold, plus do all the data transfers from my One X+ to this one, I never thought to actually look the thing over. But I'll be darned, after reading the first few posts just now, I took my case off and yep, there is an ever so slight defect as well. Their not gaps..but a slight "wavelike" unevenness all around. I have very sensitive tactile sensations in my fingers, so i can feel roughness on certain spots. Trying not to let it bother me, but my neuroticism is trying to kick in.
davidper said:
I had the same issue with mine, and the store manager said he would only exchange it if it had three dead pixals. The phone had about five dead pixals but in two different clusters which made it seem like only two pixals, due to the high dpi. The store manager than called att and asked what he should do because he was only able to see two dead spots/pixals. They probably told him it was up to him and that the defective pixals should be clearly seen with the naked eye. He refused to exchange it because he felt uncomfortable not being able to see more than two dead spots/pixals. I tried a different store with much success. Probably because the store manager was so understanding of the issue.
Click to expand...
Click to collapse
Really, they refused you an exchange? When I had my Optimus G, they exchanged it for me because it got too hot. If you get a new device and it has dead pixels, they should not be able to refuse service. Dead Pixels should not be a standard.
rajbsn said:
Wow!!I was wondering it's only me or a wide spred issue. Now I know it's not just me. My phone looks perfect at the top but the bottom has imperfections. There is a very slight gap and I can feel the ups and downs when I move my finger around the edges. I think I should go to AT&T sore and see if the replace it.
Click to expand...
Click to collapse
Mine is fine, I don't think this is WIDESPREAD issue.