Related
I have the XV6800 and noticed that this phone over times developes some screen spots. I have one so far, and on my previous one that I returned (for other reasons) developed one also.
I read a thread on another website that Moguls / Titans develop it too.
Has any one else Developed this? If so is it fixable or is it something that might cause like sometype of recall and issue a fix where we might get phone replacements later on?
i have a light spot about the size a pea in the screens lower left-hand quadrant. It's noticeable it during the verizon boot-up screen with the white background, in word, etc. anything with a white background. Not noticeable if the screen is colored.
I've wondered if this was normal.
mine's got 3 of them now
same here, my burnin spot is also in the lower left-hand corner the size of a pea.
same here, lower left corner is lighter than the rest of the screen...looks like somebody missed something on QA
themoz said:
i have a light spot about the size a pea in the screens lower left-hand quadrant. It's noticeable it during the verizon boot-up screen with the white background, in word, etc. anything with a white background. Not noticeable if the screen is colored.
I've wondered if this was normal.
Click to expand...
Click to collapse
Yes, mine is in the exact same place. I read on another website that it might be an HTC issue because other TITAN's have gotten these spots also.
At first I thought that a picture image was burnt into my screen or that I might have pressed the screen to heavily and damaged it.
This has happened twice. I wonder if there is a fix because this is very annoying especialy when trying to read or watching a video.
Same Here
I have a pc6800 through Alltel and just noticed the same problem three days ago...has anyone spoken with their SP and found out if they are replacing them?
Killroy8868 said:
I have a pc6800 through Alltel and just noticed the same problem three days ago...has anyone spoken with their SP and found out if they are replacing them? I am afraid to take mine in since my all High and mighty Moister sticker now says void even though my phone hasn't been with in 100 feet of water. I find those stickers to be such BS...but that could just be me...I wish I could find some where to buy spare ones..
Click to expand...
Click to collapse
I am not entirely certain but I think the void sticker that is displayed by the battery is for the screw. I mean if you try to unscrew your phone to fiddle with the insides then that voids your warranty. I could be wrong.
The only concern would be that if we where to return the phone to get a replacement one, that we would have to flash our RADIOS and ROMS to stock if any one has flashed them to anything that is not stock.
The stickers on both of my alltel 6800's said void out of the box. Their explaination for this is the when the sticker get wet the words bleed and turn the entire sticker purple. Not sure how accurate the rep was but that is the story for what it is worth.
shayes5 said:
The stickers on both of my alltel 6800's said void out of the box. Their explaination for this is the when the sticker get wet the words bleed and turn the entire sticker purple. Not sure how accurate the rep was but that is the story for what it is worth.
Click to expand...
Click to collapse
Yep..you are right . The void stickers are good until they turn a solid purple or red...weeehhh...I'm goin to go and replace my phone this week will let you know how it goes..and what they say
Yeah, mine's got a spot the size of a small pea in the bottom left-hand corner. Doesn't bother me too much yet though, I've got the insurance so I'll go get it replaced one of these days. For others that have tried to get them replaced, any troubles?
After doing some research on forums I noticed that many people have this problem.
Some say that it might be an issue with the phone heating up, faulty LCD manufacturing, the excess use of the vibration feature and so on......
But It seems that no matter what you ( such as gettting a replacement) your current or new phone might still get these spots.
It seems that not many carriers know about this issue, not even HTC.
So the problem might consist unless it is made known to them so they can create a fix for the new shipment of phones. Or else this will reoccur on the phones they have shipped out already.
It sucks because most of us paid a large amount of money for these devices to have it be faulty( not something that can be fixed via software at this moment). Just my opinion.
Ditto, same spot here. was wondering about the spot for a while. I have dropped mine a million times and thought it was because of that.
would be nice to be able to change it in because of the spot because mine is beat down to the ground like 4 flat tires.
will they give me crap because of how beat up it is?
I know every time I go to Alltel and get a phone replaced via the insurance the first question they ask the Rep at the store is if the phone looks like it has been dropped or if it has water damage....I'm sure that is so they can blame it on the user. As far as the phone being under manufacturer warranty they usually just swap it out for me no questions asked. I just always hate when they open the box infront of me and give nothing but the phone....would be nice to have an extra case and charger...LOL..
anyone know if sprint good about swapping phones and if i should do insurance or manufacturer warranty and if i do insurace can i switch to touch or you can only change phone in first thirty days
i got 2 spots in lower left corner
Me too (x3)
I've been through three Sprint-branded titans because of this. I'm 100% sure it's a design flaw. If we all complain at once, HTC might actually listen and make a titan that doesn't do this!
I also have two pea-sized spots in the lower left quadrant of the screen. Doesn't really bother me though, as I only notice it when the phone is booting up.
I've got 3 spots lower-lefthand corner as well on my Mogul.
I made a poll to actually see the statistics of the effects of these Spots on the TITAN / 6800
Feel free to Vote
Unfortunately my OCD kicked in and I returned my first EVO LTE as it had peace of dust under the screen and slight light leakage at the bottom. Other than that my screen never had any flex or ripple issues and I am regretting that I took it in for an exchange!! My 1st exchange unit had a pixel that was stuck in the on position and had seriously bad LCD ripple effect. Took that back to a different Best Buy and the second exchange also has this same LCD ripple effect. It is most noticeable on black screens if you lightly press around the sides like you are scrolling up and down a web page. It can also be scene on the home screen. There are several videos of a One X having this issue. Example: http://www.youtube.com/watch?v=1DmLNSiNT24
My question is, how many people have this issue? I am crossing my finger and hoping I can get a unit again that doesn't as I truely am pleased with the other aspects of this phone and can deal with the other small little hickups of a new product launch.
I have none of this.
my OG Evo had this after I replaced the digitizer. i assumed i did something wrong since the one before it did not. no issues on my lte
Limited sample of responses so far, but seems to be looking more positive than I expected it to be!
Maybe I have a better chance of my next replacement not having this issue than I thought! I hope it was just a bad batch for this area and the next shipment will be better!
Had same ripple issues
Hi..well I got my evo lte on a pre order. I ve had all the evos thru the last couple years and the LTE is a very good phone. I noticed the exact same thing,when I would gently push or tap on the screen it would have clothes of light that we're very bad,and on black screens that was even worse. I called sprint and they told me to go to a store to exchange it. I went to the store and the manager was awesome we sat down and he brought out 5 brand new EVO LTE s for us to try. At his amazement they all were as bad if not worse then mine on the ripple effect. I have a galaxy 2 touch and when we pushed on that screen no matter how hard it showed no signs of light bleeding or rippling at all. He didn't know what to tell me but did they say the screen on the htc should not do that at all and it might be a bad batch. To me it seemd the glass on the LCD screen didn't bond well with the glue they used,and when you pushed or tapped it would go down into the LCD screen. I know when you push directly on a LCD tv,computer screen it will give you the same similar effect. I called sprint and told them I was returning the phone and the lady in the return department told me she has had a few calls about people wanting to return the phone because of this issue. I really like the LTE,but couldn't put up with the screen issues. I am going to wait till the galaxy 3 comes out and also by then check out the EVO lte again to see if the problem has been fixed.
Sigh first off mine does this but I have to apply more force then is needed for the phone to register the touch. Second off WHY are you pushing with any kind of pressure to even do that? Now if you're just touching the LCD and it is doing this I understand. Also even in the vid it looks like more force is being applied as needed but not as much as I have to apply? That being said if you think sgsiii will be better well it will cause it doesn't use a LCD lolol.
Edit I think this is to have gorilla glass 2 which is thinner so chances of this happening are going to be common I'd assum of you push down on the screens lol.
Sent from my EVO using xda premium
ckoadiyn said:
Sigh first off mine does this but I have to apply more force then is needed for the phone to register the touch. Second off WHY are you pushing with any kind of pressure to even do that? Now if you're just touching the LCD and it is doing this I understand. Also even in the vid it looks like more force is being applied as needed but not as much as I have to apply? That being said if you think sgsiii will be better well it will cause it doesn't use a LCD lolol.
Edit I think this is to have gorilla glass 2 which is thinner so chances of this happening are going to be common I'd assum of you push down on the screens lol.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
From my experience I am not applying any more pressure than I would use normally. That is the only reason I noticed it. I was typing in my numerical pass code on a black screen and saw the ripples. I then did further investigation. The video might not be the best reproduction of how you get the problem under normal use, but it does show what the problem looks like. My first phone I actually used more pressure on trying to figure out what the dust spot was and never had this issue occur so had no clue what I would run into with an exchange. This is a production issue on some LTE's and One X's. The below comment was posted in an article on the One X in April. I just think some phones are much more noticeable than others and who knows what this issue will turn into over the life of the phone.
Source: TechnoBuffalo
"Three separate models provided by HTC, and one by network Three, produced the issue, CNET UK said, meaning it may potentially be widespread. However, Daniel Hundt, creative director at One & Co., HTC’s design consultancy, said the company would never “let that ship.” Hundt added, “maybe this is not a shipping build,” referring to a unit CNET UK writer Natasha Lomas demonstrated the issue with.
TechnoBuffalo’s own Jon Rettinger and Todd Hasleton didn’t notice the issue when reviewing the One X, and chances are good the average user won’t either. The device really is one of the most beautiful phones out there. It also provided the best Android experience we’ve had yet, so this “screen flex flaw” issue shouldn’t deter folks from picking the device up. Still, we reached out to HTC for comment, and will update as soon as we hear back"
http://www.technobuffalo.com/companies/htc/htc-one-x-may-be-plagued-by-minor-screen-flex-flaw-issue/
This is not something that will push me to an S3 though!
Ok well then that's a diff story and I'm wondering if it due to the glue not curing by the time it got to you... Or a lack of glue. Since the glue has apparently been a problem this time around for HTC lol. And glad to know you won't defect to the sgsiii. The one thing I don't understand is why Samsung uses the gn as a beta for their sgs line. Same screen on gn and sgsiii but its to be slightly better.(only cause they used the gn as a test)
Sent from my EVO using xda premium
ckoadiyn said:
Ok well then that's a diff story and I'm wondering if it due to the glue not curing by the time it got to you... Or a lack of glue. Since the glue has apparently been a problem this time around for HTC lol. And glad to know you won't defect to the sgsiii. The one thing I don't understand is why Samsung uses the gn as a beta for their sgs line. Same screen on gn and sgsiii but its to be slightly better.(only cause they used the gn as a test)
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yep, glue on this current phone has the screen slowly getting white. Started out kind of yellow and now most of it is white with the bottom section still a little yellow. Going to give it till Friday to see if anything improves and if not I will test out the new shipment at Best Buy and try my hand at another exchange.
Update:
Went back to Best Buy and we opened up and looked at 5 different phones and EVERY single one of them had this issue. Some worse than others, but it was still apparent.
Not giving up though, trying a different store today to see how that works. I know my very first phone did NOT have this issue, just had a small speck of dust and slight light leakage..... I SOOO wish I had that phone back! Should have never returned it.
Update on my OCD - LCD Flex Issue:
5 Different Best Buys in two different states. Every phone I have tested had this issue to some extent (18 different phones tested). Some worse than others. I now believe my original phone had the issue, but was just less noticeable. Also, the screens normally do start out with more of a yellow tint from the glue. This mostly goes away after a few days of high brightness use, but sometimes a slight yellow band at the bottom remains. I think HTC doubled up the glue to help with the light leakage issues they are known for in the past.
Current phone has white balance closer to a pure white than a light yellow. (no yellow band at bottom either. This screen still has the flex issue but needs medium/medium heavy pressure to see on a black screen. I should never have to press that hard on anything to ever notice it. I am almost perfectly happy now, only bad thing is it does have one stuck pixel at the top of the screen (can't be seen on Pink, Red, Blue or Black, but is apparent on Yellow, Light Blue, Green, White and Gray). Would have never noticed it without the dead pixel test. I would rather have that than have it sensitive to the flex issue and any yellow tint to my white screen.
So, if you have not noticed the flex issue, then DO NOT look for it or try to reproduce it. You will most likely find it. Not a show stopper and should not be reproduced under normal use (Except for the few bad eggs that are really sensitive).
When I look at my screen there's a couple of spots that are really bright it looks like the pixels may be damaged. It almost looks like you can see to the back side of the screen. I've had an otterbox defender on it since I got it, plus its never been dropped. I just got the phone a week ago. If I take it back to get replaced will I get a new phone or a "like New“ phone?
I really hate to see this on a new phone. Any suggestions.
jsminnis said:
When I look at my screen there's a couple of spots that are really bright it looks like the pixels may be damaged. It almost looks like you can see to the back side of the screen. I've had an otterbox defender on it since I got it, plus its never been dropped. I just got the phone a week ago. If I take it back to get replaced will I get a new phone or a "like New“ phone?
I really hate to see this on a new phone. Any suggestions.
Click to expand...
Click to collapse
If you bring/send it back to verizon, they should give you a new phone. If it is through insurance, you may get a refurb but the phone is still new so they may only have new ones in stock.
best bet is call verizon and see what they will do.
I've got a similar spot on my phone but it doesn't bother me enough to ship it out for a possibly refurbished one. It's a single spot in the upper left portion of the screen that I can only notice when the screen is completely dark. I'm guessing it's a relatively widespread issue since I think I've heard something similar at least twice before.
lolspin said:
I've got a similar spot on my phone but it doesn't bother me enough to ship it out for a possibly refurbished one. It's a single spot in the upper left portion of the screen that I can only notice when the screen is completely dark. I'm guessing it's a relatively widespread issue since I think I've heard something similar at least twice before.
Click to expand...
Click to collapse
is it that dark rectangle thing that you can only see when looking at it from an angle underneath? every DNA has that on the top left and top rgiht lol
Hey guys, so it seems I have a near perfect HTC One, where I even don't have that gap at the top, but I do however have on the left side near the top left corner a small manufacturing defect that leaves about 2-3mm of the LCD edging out a bit making it feel as if brushing against a sharp ruler on that spot. I rarely have my hand there to really feel that defect through natural use of the phone and certainly not visible unless specifically looking for the LCD edge line very very closely, my concern is if I go in and swap the phone that the swapped phone will have other things wrong with it.
Should I bother replacing? I have no experience replacing/exchanging the same exact phone for a better build quality so this is why I ask.
It's a roll of the dice..
My original pre-order was almost mint but had a similar / minor flaw. I called AT&T and they sent me a replacement..
The replacement they sent had a more brown'ish looking screen and the backlit buttons were very dim. It also had a small gap on the top.
I kept the original and sent back the replacement that had just arrived.
I then went to an AT&T store and the replacement he brought out had some flaw where the backlit buttons would only turn on if it was pitch dark. I refused that replacement and still have my original pre-order One.
If you have one that's close to mint and it only has a minor flaw, I'd keep it..
My .02
raqball said:
It's a roll of the dice..
My original pre-order was almost mint but had a similar / minor flaw. I called AT&T and they sent me a replacement..
The replacement they sent had a more brown'ish looking screen and the backlit buttons were very dim. It also had a small gap on the top.
I kept the original and sent back the replacement that had just arrived.
I then went to an AT&T store and the replacement he brought out had some flaw where the backlit buttons would only turn on if it was pitch dark. I refused that replacement and still have my original pre-order One.
If you have one that's close to mint and it only has a minor flaw, I'd keep it..
My .02
Click to expand...
Click to collapse
By your descriptions this phone's QC sounds like a piece of ****.
akira02rex said:
By your descriptions this phone's QC sounds like a piece of ****.
Click to expand...
Click to collapse
I don't think it's any secret that HTC has a few QC problems to correct..
The normal user would probably never notice to be honest. We are the 1% that are hardcore users and notice everything.
Most people open the box, turn it on, and don't even arrange their icons never mind tinker..
None of the 3 I had were serious flaws that a normal user would even notice..
raqball said:
I don't think it's any secret that HTC has a few QC problems to correct..
The normal user would probably never notice to be honest. We are the 1% that are hardcore users and notice everything.
Most people open the box, turn it on, and don't even arrange their icons never mind tinker..
None of the 3 I had were serious flaws that a normal user would even notice..
Click to expand...
Click to collapse
I don't think their parts are manufactured to a tolerance small enough. It should be down to about 0.001" instead of around 0.003".
raqball said:
I don't think it's any secret that HTC has a few QC problems to correct..
The normal user would probably never notice to be honest. We are the 1% that are hardcore users and notice everything.
Most people open the box, turn it on, and don't even arrange their icons never mind tinker..
None of the 3 I had were serious flaws that a normal user would even notice..
Click to expand...
Click to collapse
True.
akira02rex said:
By your descriptions this phone's QC sounds like a piece of ****.
Click to expand...
Click to collapse
It was the same with the One X unfortunately.
Sent from my HTC One using XDA Premium HD app
raqball said:
It's a roll of the dice..
My original pre-order was almost mint but had a similar / minor flaw. I called AT&T and they sent me a replacement..
The replacement they sent had a more brown'ish looking screen and the backlit buttons were very dim. It also had a small gap on the top.
I kept the original and sent back the replacement that had just arrived.
I then went to an AT&T store and the replacement he brought out had some flaw where the backlit buttons would only turn on if it was pitch dark. I refused that replacement and still have my original pre-order One.
If you have one that's close to mint and it only has a minor flaw, I'd keep it..
My .02
Click to expand...
Click to collapse
Thanks for sharing your experience, definitely going to stick with this one then considering the hassle and very low probability of finding that "perfect" One.
Also, I want to clarify that the phone is absolutely stunning every time I pick it up and am impressed and excited by it just as I was when watching videos or reviews for it before its release while waiting for my preorder. I've had it since the 18th and certainly not bored with it, which goes to show for something I think. These minor QC issues aren't even noticed by the larger majority, as said in previous post.
Thanks guys/gals, my nerves are calmed about exchanging it
I've done hours of research on multiple forums. Most of the issues seem to center around gaps around the screen and dead pixels. I want to believe that the reason I am seeing that almost nobody has a greatly built phone, without any problems, is because everyone is posting and complaining in the "build quality issue" threads.
I bought the S4 on launch day and loved it. Albeit the squeaky/creeking back of the phone, and the "cheap" feel. However, I did break the screen and will be getting a full refund from squaretade (lovely company, wasn't expecting that.)
I had the HTC One X before my S4 and absolutely loved it. I'd really love to pick up a 64gb Black One instead of going back to the S4, but with all of these complaints I'm not sure if I should. I'm pretty certain that I could inspect the phone in the AT&T or Best Buy store before purchasing it, but I don't want to come off as a **** and make them open five phones to find one that is perfect. I will be purchasing it off contract, at around $700, so I cant seem to justify buying one if it isn't perfect. I'm quite OCD and I just wouldn't be okay with that.
So my question is this: Does anyone actually have a perfect One? And if so, what color-size-and purchase date?
Thank you for your time
im about to be on my fifth HTC One and havent gotten a "perfect" one yet .... im pretty aware of how to put the device through a detailed test to check out its battery, screen for dead pixels, speaker sound issues, gaps, vibrate motor, camera lens failure and rattling, squeaks and creaks on the device dude to flex, scratches. the quality control on the HTC One is pretty despicable ... so upset I traded away my Apple iPhone 5
I think mind is about as perfect as they come. Silver 32gb and I got it a few weeks ago
Sent from my HTC One using Tapatalk 4 Beta
By as perfect as the come, what is wrong?
I think I can fall into this catagory...ive had my phone since 5/1 and ive tried my best to find some of these issues that ive read about....
The lines are just perfect...no gaps and no meet points are uneven. Ive also used the dead pixel finder apps and nothing there either...from any viewing angle.
I believe most of the issues ive read about tend to lean towards the international models...but ive seen them on this forum also. At the end of the day "most" units are probably near perfect...but there will always be a few that aren't.
Purchased: 5/1/2013
Silver
32GB
I cannot find any flaws in mine. Bought a couple of weeks ago at the AT&T store straight - first phone out of the box. No gaps, no dead pixels. 32gb black edition. Loving it!
Sent from my HTC One using xda app-developers app
Not a single complaint
I have the silver 64G version and I've had none of the issues about which people have been complaining. No dead pixels, no fast-draining battery (I only have to charge every other overnight and I can get three full days with Power Saver enabled, unless I watch a TV show or movie, Navigate for a while, or have the screen on for an extended period for any other reason), no backlight bleeding through any screen "gaps", no camera issues, no lagginess, etc.. Everything works, looks, and fits exactly right. It's the first of four Android phones I've owned that I don't feel I have to root or overclock, and it works perfectly with stock everything.
I see that there are some people with some legitimate issues with various aspects of their Ones, and I understand their frustrations. A dead pixel is a dead pixel and there's no getting around that. But I also see a number of very vocal people who seem to be looking for problems where there are none. If you* see a slightly brighter shade of backlight at the very top of the screen where the glass meets the aluminum when you hold your phone at an extreme angle and squeeze the sides really hard, that's not a manufacturing defect -- that's you doing your job as an RM for some competitor, being a nitpicking primadona, or just a troll.
* of course, "you" is not you specifically, OP, but the generic "somebody"
xsaqzw said:
I've done hours of research on multiple forums. Most of the issues seem to center around gaps around the screen and dead pixels. I want to believe that the reason I am seeing that almost nobody has a greatly built phone, without any problems, is because everyone is posting and complaining in the "build quality issue" threads.
I bought the S4 on launch day and loved it. Albeit the squeaky/creeking back of the phone, and the "cheap" feel. However, I did break the screen and will be getting a full refund from squaretade (lovely company, wasn't expecting that.)
I had the HTC One X before my S4 and absolutely loved it. I'd really love to pick up a 64gb Black One instead of going back to the S4, but with all of these complaints I'm not sure if I should. I'm pretty certain that I could inspect the phone in the AT&T or Best Buy store before purchasing it, but I don't want to come off as a **** and make them open five phones to find one that is perfect. I will be purchasing it off contract, at around $700, so I cant seem to justify buying one if it isn't perfect. I'm quite OCD and I just wouldn't be okay with that.
So my question is this: Does anyone actually have a perfect One? And if so, what color-size-and purchase date?
Thank you for your time
Click to expand...
Click to collapse
Yup, i have one.Silver 32gb
Got it on release day, no gaps, glass is flush, no dead pixels, and my boss has the phone too, black 32 gb, he bought his after playing with mine, hes on Tmo.His black is perfect also
Nothing is wrong but some people might nitpick. I've noticed nothing
Sent from my HTC One using Tapatalk 4 Beta
Mine was purchased straight from HTC and its great. It's just as good as my wife's iPhone or my friends GS4. I don't see any issues with it at all.
Sent from my HTC One using Tapatalk 4 Beta
Thank you for all of the positive feedback everyone!!! I'm still going to make sure the at&t rep will let me take a good look over it, but I think I've made my decision.
Side note:; Are there any de-sense roms yet? Not that I don't like sense.. I loved it on my One X
xsaqzw said:
Thank you for all of the positive feedback everyone!!! I'm still going to make sure the at&t rep will let me take a good look over it, but I think I've made my decision.
Side note:; Are there any de-sense roms yet? Not that I don't like sense.. I loved it on my One X
Click to expand...
Click to collapse
Google is your friend. Or since you're already on XDA you might as well check out the Original Android development section.
Oh, and same goes for me. My One appears to be FINE to me. No dead pixels, no body issues, etc. I recently cracked the LCD so I sent it in to HTC for repair and hopefully they don't mess anything up to take away from that 'perfection'.
I have some very small issues with mine if I was nitpicking, like the slightest of unevenness between the screen/speaker grills. Also a small gap in the top left corner (extremely small). But don't affect usage in any way and I can only tell if I closely examine. My previous one had dead pixels which annoyed me - so I exchanged it. But nothing worth exchanging here, IMO.
badams1 said:
I think I can fall into this catagory...ive had my phone since 5/1 and ive tried my best to find some of these issues that ive read about....
The lines are just perfect...no gaps and no meet points are uneven. Ive also used the dead pixel finder apps and nothing there either...from any viewing angle.
I believe most of the issues ive read about tend to lean towards the international models...but ive seen them on this forum also. At the end of the day "most" units are probably near perfect...but there will always be a few that aren't.
Purchased: 5/1/2013
Silver
32GB
Click to expand...
Click to collapse
I'm with you and have a 32gb silver with zero issues. My g/f has a 64GB silver with no issues either.
No issues here
No dead pixels, battery lasts the day or more depending on usage, no fit issues that I can see, no random reboots or anything. Really like the device. :good:
Cosmetically, my phone is flawless no gaps lifts or anything. Screen is perfect no dead/stuck pixels and couldn't be happier with it. I know some have knocked the durability of the one but I've been caseless for 2 weeks and not even a single grain of chipping on the black finish.
I have a perfect one
I'm not that happy with the build quality on mine as I expected more from "ZeroGap and Unibody". I come from Galaxy Note N7000, and I was really expecting Apple quality.
Mine is not that bad as some photo's of others complaining, but my upper speaker grill is lower than the screen, so when I swipe from the top, I can feel the sharp edge of the screen. The bottom speaker grill is on the same level as the screen so no bumps there.
Next, there's a thin black plastic that wraps around the screen. On the left upper corner, this black plastic is partially stuck inside and partially sticking out more than the other sides. It was annoying me until I wrapped around a case that covers them. I had a Nokia 920 which also has this kind of black thin plastic, and the N920 had a perfect black strip around the screen. Nokia can do it, why can't HTC do it?
Going to the camera (major deciding factor for me), sometimes the photo looks really blurry on 1/3 of the left and right (landscape mode) while it's perfectly sharp in the center. This is because optical image stabilization over-reacts and blurs the image. This doesn't happen all the time, but it happens enough times that it bothers me. Also when taking pictures of the blue sky and look on a computer, the pixels are garbage and artificial looking. Low light pictures and macro pictures are pretty good.
I have a 32GB silver AT&T HTC One, and Android Revolution HD 10.2.
Mine is perfect, but then again I don't go looking for reasons to complain...
Went to Costco with my GF, we looked at 3 HTC ones and chose the best of the 3.
Ours don't have gaps, glass is pretty flush and no dead pixels. I think we got lucky.