Hello, i have a problem, i have sense R3 with SR-MOD 3 and my wifi cannot work, help me please.
Go to link in my signature (unlocking, rooting...), part about custom rom flashing and find a part about flashing of boot.img.
Do you have fastboot installed on your PC?
Sent from my awesome fridge
nlooooo said:
Go to link in my signature (unlocking, rooting...), part about custom rom flashing and find a part about flashing of boot.img.
Click to expand...
Click to collapse
Where is? I cant see link
You can't see it if you're browsing from your phone. Here you go:
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
nlooooo said:
You can't see it if you're browsing from your phone. Here you go:
http://forum.xda-developers.com/showthread.php?p=36138808#post36138808
Click to expand...
Click to collapse
I have rooted my phone, with R1 wifi is Ok, but R2,R3 doesnt work, my eng. is bad Iam from CZECH
matejvc said:
I have rooted my phone, with R1 wifi is Ok, but R2,R3 doesnt work, my eng. is bad Iam from CZECH
Click to expand...
Click to collapse
R1 is based on 1.14 RUU so you still have boot.img from 1.14. R2 i R3 are based on 1.18 so you need to flash boot.img based on 1.18, because when you flash rom boot.img included in rom.zip doesn't get flashed, you have to do it manually. Go to tutorial, I told you where, and you'll find a solution.
EDIT-EXPLANATION
Files from boot.img and some parts of zImage (kernel image) correspond to a correct lib files (modules from lib folder). So when you have one part (boot.img) from one base and the other part (modules) from different, and if manufacturer made some changes to ether one of them, you'll end up with some stuff not working (usually wifi, mobile data, gps...).
nlooooo said:
R1 is based on 1.14 RUU so you still have boot.img from 1.14. R2 i R3 are based on 1.18 so you need to flash boot.img based on 1.18, because when you flash rom boot.img included in rom.zip doesn't get flashed, you have to do it manually. Go to tutorial, I told you where, and you'll find a solution.
EDIT-EXPLANATION
Files from boot.img and some parts of zImage (kernel image) correspond to a correct lib files (modules from lib folder). So when you have one part (boot.img) from one base and the other part (modules) from different, and if manufacturer made some changes to ether one of them, you'll end up with some stuff not working (usually wifi, mobile data, gps...).
Click to expand...
Click to collapse
Where I download boot.img on 1.18 ??
It's included in the ROM.
Sent from my awesome fridge
matejvc said:
Where I download boot.img on 1.18 ??
Click to expand...
Click to collapse
Read the tutorial, There is written:
- Download the rom of your choice and put it on the sd card of your device
- Unpack boot.img from rom.zip and put it on the root of c: drive on your PC
- Reboot phone to recovery
- Choose option ‘wipe data/factory reset’
- Choose option ‘wipe cache partition’
- Choose option ‘advanced’ and in next menu choose ‘wipe dalvik cache’
- Go back to main menu and choose ‘install zip from sd card’ and then ‘choose zip from sd card’
- Navigate recovery to rom zip you put on sd card and choose it
- Wait until the installation is finished
- Reboot your phone to fastboot and connect it to your PC
- Open command prompt, lead it to folder where you installed adb and fastboot (remark: unlocking bootloader guide pointed you to make a folder c:\Android for this) and issue commands
fastboot flash boot c:\boot.img
fastboot reboot-bootloader
fastboot erase cache
- Reboot your phone
nlooooo said:
Read the tutorial, There is written:
- Download the rom of your choice and put it on the sd card of your device
- Unpack boot.img from rom.zip and put it on the root of c: drive on your PC
- Reboot phone to recovery
- Choose option ‘wipe data/factory reset’
- Choose option ‘wipe cache partition’
- Choose option ‘advanced’ and in next menu choose ‘wipe dalvik cache’
- Go back to main menu and choose ‘install zip from sd card’ and then ‘choose zip from sd card’
- Navigate recovery to rom zip you put on sd card and choose it
- Wait until the installation is finished
- Reboot your phone to fastboot and connect it to your PC
- Open command prompt, lead it to folder where you installed adb and fastboot (remark: unlocking bootloader guide pointed you to make a folder c:\Android for this) and issue commands
fastboot flash boot c:\boot.img
fastboot reboot-bootloader
fastboot erase cache
- Reboot your phone
Click to expand...
Click to collapse
Oh thank you my friend, wifi works Thank
matejvc said:
Oh thank you my friend, wifi works Thank
Click to expand...
Click to collapse
Friend are you know how I get jelly bean theme ? (http://cdn.teamandroid.com/wp-content/uploads/2012/06/disable-android-notifications-1-337x600.png)
I dont know if I can download somewhere.
matejvc said:
Oh thank you my friend, wifi works Thank
Click to expand...
Click to collapse
That's what the thanks button stands for.
---------- Post added at 08:59 PM ---------- Previous post was at 08:36 PM ----------
matejvc said:
Friend are you know how I get jelly bean theme ? (http://cdn.teamandroid.com/wp-content/uploads/2012/06/disable-android-notifications-1-337x600.png)
I dont know if I can download somewhere.
Click to expand...
Click to collapse
I don't know, ask Marteen, he's up with that.
matejvc said:
Friend are you know how I get jelly bean theme ? (http://cdn.teamandroid.com/wp-content/uploads/2012/06/disable-android-notifications-1-337x600.png)
I dont know if I can download somewhere.
Click to expand...
Click to collapse
Do you just want the settings app with the JB theme or the whole ROM with JB/AOSP theme?
Sent from my awesome fridge
MaartenXDA said:
Do you just want the settings app with the JB theme or the whole ROM with JB/AOSP theme?
Sent from my awesome fridge
Click to expand...
Click to collapse
Both, if possible. Please
Install the Sense Revolution ROM and flash AOSP invertion mod.
Sent from my awesome fridge
MaartenXDA said:
Install the Sense Revolution ROM and flash AOSP invertion mod.
Sent from my awesome fridge
Click to expand...
Click to collapse
Thanks, but I flash with Sense.RevolutionAOSP.Theme.V10, my phone not Boot, start, but after dispaly is off and buttons dont work. I dont know what I doing wrong.
With R3, use the one I posted in the sense revo thread.
Sent from my awesome fridge
MaartenXDA said:
With R3, use the one I posted in the sense revo thread.
Sent from my awesome fridge
Click to expand...
Click to collapse
Ok, I must install Sense R3, then SR3-MOD, then Sense.Revolution.JB_TRANS.zip ??
matejvc said:
Ok, I must install Sense R3, then SR3-MOD, then Sense.Revolution.JB_TRANS.zip ??
Click to expand...
Click to collapse
Not the JB_TANS.zip, check the 5th post and use the AOSP Invertion mod for R3 by me.
Related
Thanks to all the guys posting in this forum.
I finally managed to:
- unlock bootloader with the hardware trick (without loosing DRM?)
- upgrade from stock FW 335 to 368
- unroot device
so far i can help anyone having troubles with it
now i need to:
- install CM7.1 using rom manager, but the question is:
which is the Clockworkmod Recovery for the SK17? (it's not listed in the RM options).
Thanks for answering
giank30 said:
Thanks to all the guys posting in this forum.
I finally managed to:
- unlock bootloader with the hardware trick (without loosing DRM?)
- upgrade from stock FW 335 to 368
- unroot device
so far i can help anyone having troubles with it
now i need to:
- install CM7.1 using rom manager, but the question is:
which is the Clockworkmod Recovery for the SK17? (it's not listed in the RM options).
Thanks for answering
Click to expand...
Click to collapse
the boot image is there in the download of the rom on freexperia thread , same process flashboot replace boot img , and then flash the cynogenmod via recovery simple.
berz said:
the boot image is there in the download of the rom on freexperia thread , same process flashboot replace boot img , and then flash the cynogenmod via recovery simple.
Click to expand...
Click to collapse
I wanted to see what recovery mode looks like, but i cant enter it. Do i have to replace boot.img first to even enter it?
I'm new. =)
edit: im rooted on latest stock
berz said:
the boot image is there in the download of the rom on freexperia thread , same process flashboot replace boot img , and then flash the cynogenmod via recovery simple.
Click to expand...
Click to collapse
ok for reflashing boot.img w/ flash boot, but what is "recovery simple", can you try to explain how to do that? (sorry for the stupid question)
giank30 said:
ok for reflashing boot.img w/ flash boot, but what is "recovery simple", can you try to explain how to do that? (sorry for the stupid question)
Click to expand...
Click to collapse
he meant recovery mode. you can enter it by pressing volume down key during first 5 seconds of boot. you should wipe data and apply cm7 zip file there.
but i cant enter it. im wondering if i have to replace boot.img first :S
yes thats right , u need to replace boot image first.
berz said:
yes thats right , u need to replace boot image first.
Click to expand...
Click to collapse
ok thanks.
people are reporting that menu LEDs are very bright. do you know if theres a way to reduce brightness or disable the light completely?
for what i know this the vol down at boot should trigger the Clockworkmod Recovery, but as I cannot install it it's obvious that we cannot see it...
inside update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip there is a boot.img but don't know how to handle it... :-/
is it that the file that should be flashed using fastboot?
giank30 said:
for what i know this the vol down at boot should trigger the Clockworkmod Recovery, but as I cannot install it it's obvious that we cannot see it...
inside update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip there is a boot.img but don't know how to handle it... :-/
is it that the file that should be flashed using fastboot?
Click to expand...
Click to collapse
yes, boot.img via fastboot.
the instructions are on the official CM thread. here's the post for Mini Pro. http://forum.xda-developers.com/showpost.php?p=16822404&postcount=4
so i must:
1: estract boot.img from update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip
2: flash via fastboot
3: put update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip on the sd card
4: trigger the recovery mode via vol down on boot
5: flash CM7.1?
right?
giank30 said:
so i must:
1: estract boot.img from update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip
2: flash via fastboot
3: put update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip on the sd card
4: trigger the recovery mode via vol down on boot
5: flash CM7.1?
right?
Click to expand...
Click to collapse
i believe so.
there are some issues. LEDs under menu keys are super bright, and some people are reporting vibration and keyboard layout issues. keyboard layout can be solved (theres a thread for it) and vibration could be due to not wiping data before applying CM. keyboard layout could be due it as well.
so basically, LEDs is the only known issue right now.
sulkie said:
i believe so.
Click to expand...
Click to collapse
update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip is 91Mb, is that correct? should I flash it over 4.0.A.2.368?
giank30 said:
update-cm-7.1.0-XperiaMiniPro-SK17i-signed.zip is 91Mb, is that correct? should I flash it over 4.0.A.2.368?
Click to expand...
Click to collapse
yes, except my file is 89mb. is it 91 on sdcard or on your local harddrive?
edit: its 89.2 on my sdcard as well.
91.384 Kb.. so 89 Mb...
boot.img (inside the zip file) is 4,27 MB (4.481.024 byte) dated 29.2.2008, right?
giank30 said:
91.384 Kb.. so 89 Mb...
boot.img (inside the zip file) is 4,27 MB (4.481.024 byte) dated 29.2.2008, right?
Click to expand...
Click to collapse
indeed.
i got my file from CM's site. theres also a 110mb file on the official xda thread hosted on hotfile. im downloading it now to see if theres any difference
I can't find the link, can you share it?
btw, i got the Freexperia logo on boot but then it stucked...
how do I trigger recovery mode?
tnx
giank30 said:
I can't find the link, can you share it?
btw, i got the Freexperia logo on boot but then it stucked...
how do I trigger recovery mode?
tnx
Click to expand...
Click to collapse
link is here : http://forum.xda-developers.com/showpost.php?p=16822404&postcount=4
did you wipe data in recovery before applying zip file?
cant you enter recovery mode again with volume down key?
edit: files are the same, hotfile one just has extra apps. google apps and some SE ones.
i didnt installed the zip yet.
and i didnt enter in recovery mode too...
shall i push voldown + on button at the same time to enter recovery?
giank30 said:
i didnt installed the zip yet.
and i didnt enter in recovery mode too...
shall i push voldown + on button at the same time to enter recovery?
Click to expand...
Click to collapse
yes. i linked you the instructions on the official thread several posts ago
Got iT! thank you... +1 for you
Hello, i am a newbie and i want to flash a ROM for my EVO 3D, i have hboot 1.50 with S-ON unlocked Bootloaders and Rooted. So, i will flash a ROM for my firmware and confirmed it works and no need to flash Kernel, but when i go to FLASH GUI app it only shows Kernel Image and Recovery Image... I want to flash a Full ROM, which of the options do i need to choose? Thanks.
You cannot flash roms through that. You need a recovery such as twrp
Sent from my PG86100 using xda premium
patrao_n said:
You cannot flash roms through that. You need a recovery such as twrp
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I have recovery.img in root of my sdcard which i used for install su-2.3.6.3.zip for root and unlock bootloaders with htcdev.com
luis4ever said:
Hello, i am a newbie and i want to flash a ROM for my EVO 3D, i have hboot 1.50 with S-ON unlocked Bootloaders and Rooted. So, i will flash a ROM for my firmware and confirmed it works and no need to flash Kernel, but when i go to FLASH GUI app it only shows Kernel Image and Recovery Image... I want to flash a Full ROM, which of the options do i need to choose? Thanks.
Click to expand...
Click to collapse
Taken from the guide I posted in my OP of the Flash Image GUI EVO 3D thread:
HTC Unlock - Hboot 1.5 Users Guide for ROMs with a Kernel (boot.img file):
1) Unlock using HTC method for Hboot 1.5 users
2) Load this application, Flash Image GUI, onto the device, either through the Market or the link provided in this OP.
3) Download ROM .zip file to the sdcard on the device.
4) Open up Flash Image GUI, select Browse and select the ROM .zip file, downloaded to /sdcard in the previous step.
5) Flash Image GUI will provide a warning, reminding that the ROM .zip file will *need* to be flashed in the custom recovery afterward.
6) Flash Image GUI will index the full ROM .zip file searching for the kernel and kernel modules. Once located, the Flash Image button should be enabled.
7) Select the Flash Image button and Flash Image GUI will load the kernel modules and kernel from inside the ROM zip file.
8) Select reboot recovery.
9) Inside the custom recovery, load/flash the ROM zip file.
10) Reboot to normal Android mode and all should work including Wifi!
Click to expand...
Click to collapse
Edit: 2nd question posted same time I replied to 1st question
luis4ever said:
I have recovery.img in root of my sdcard which i used for install su-2.3.6.3.zip for root and unlock bootloaders with htcdev.com
Click to expand...
Click to collapse
If you boot into the recovery, use the same method as used for the su-2.3.6.3.zip for the ROM .zip file and it will load.
The confusion occurs if the ROM contains a kernel. If so, Flash Image GUI can be used with the guide I posted above.
Alternative methods involve using fastboot to load the recovery, such as: fastboot boot c:\recovery.img
If that doesn't answer your question, feel free to post back! Thanks for the support!
This is what happens:
1.- Go to open flash GUI and starts.
2.- now kernel is preselected and chache and dalvik too.
3.- i press browse button select meanromv2.17.651.5.zip
4.- it says is a too large file for recovery or kernel image.
5.- it asks if it is a valid ROM zip file and it can locate kernel modules etc.
6.- i press yes and it says extracting zip file: meanrom.zip locating for kernel modules, peleas be patient, etc.
7.- extracted zip file in Application data.
8.- kernel continues preselected and cache too.
9.- what is the next? Press flash? And then? Reboot lnto recovery and navigate to zip file and press power button to install? Wipe data?
PD: As far as i know the kernel from the Stock and this ROM is the same. Thanks.
luis4ever said:
This is what happens:
1.- Go to open flash GUI and starts.
2.- now kernel is preselected and chache and dalvik too.
3.- i press browse button select meanromv2.17.651.5.zip
4.- it says is a too large file for recovery or kernel image.
5.- it asks if it is a valid ROM zip file and it can locate kernel modules etc.
6.- i press yes and it says extracting zip file: meanrom.zip locating for kernel modules, peleas be patient, etc.
7.- extracted zip file in Application data.
8.- kernel continues preselected and cache too.
9.- what is the next? Press flash? And then? Reboot lnto recovery and navigate to zip file and press power button to install? Wipe data?
PD: As far as i know the kernel from the Stock and this ROM is the same. Thanks.
Click to expand...
Click to collapse
Steps 7 and 8 are where more detail is needed.
Although, all this confusion might be avoided by answering one question: Does this ROM contain a kernel? If not, you can skip using Flash Image GUI and directly load the ROM from the custom recovery, since you mentioned it is compatible with stock kernel you're currently using.
If this ROM does contain a kernel then answer to all questions in number 9 should be Yes. You'll know more about the kernel included in the ROM as Flash Image GUI adds three lines of text above the Flash button detailing where the kernel was located inside the ROM .zip file and what type of kernel setup the ROM is using.
Hope that helps!
joeykrim said:
Steps 7 and 8 are were more detail is needed.
Although, all this confusion might be avoided by answering one question: Does this ROM contain a kernel? If not, you can skip using Flash Image GUI and directly load the ROM from the custom recovery, since you mentioned it is compatible with stock kernel you're currently using.
If this ROM does contain a kernel then answer to all questions in number 9 should be Yes. You'll know more about the kernel included in the ROM as Flash Image GUI adds three lines of text above the Flash button detailing where the kernel was located inside the ROM .zip file and what type of kernel setup the ROM is using.
Hope that helps!
Click to expand...
Click to collapse
If this guy tries and gives you advice about flash gui don't listen to him...He doesn't know what he's talking about.
gilbydakid said:
If this guy tries and gives you advice about flash gui don't listen to him...He doesn't know what he's talking about.
Click to expand...
Click to collapse
WTF dude? R u serious? Hope not. Joeykrim knows what he's talking about. Period.
Now, for the OP, I have a guide/flashing notes in my signature that should help clear up your Hboot 1.50 flashing issues. Also have detailed flashing "scenarios" that include using Jk's FlashImage app.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
WTF dude? R u serious? Hope not. Joeykrim knows what he's talking about. Period.
Now, for the OP, I have a guide/flashing notes in my signature that should help clear up your Hboot 1.50 flashing issues. Also have detailed flashing "scenarios" that include using Jk's FlashImage app.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Thanks, i falshed the ROM with no problems.
Deleted, starting to sound like a xda prick.
Yes it was a joke.
S3nt from my 3D wond3rland
Hi all,this is an advanced version of the ics 4.1.B.0.587/4.1.B.0.431/4.1.A.0.562 officials kernel.
The only differences with stock one are Touch Recovery CWM,min. freq. of processor set at 122 Mhz(for better battery drain)and some other ramdisk optimizations(data collect removed).
So,if you don't need overclock etc..,and you want a stable/optimized kernel,Install it with fastboot.
ROOT:enter in recovery and install the supersu zip in the attachment.
UPDATE1:Added 4.1.B.0.431 Official Version .
UPDATE2:Added 4.1.B.0.587 Official Version .
Optional but raccomanded click this(51% will be donate to UNICEF):
EVERY DAY CHILDREN DIE NEEDLESSY!!!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Q94WGHC4F2DH2
Tnx,ARCATARC.
will try it later bro..i got suffer with battery..only 11hrs with no connection..i dunno if my battery got dropped
Root Official ICS
1st post updated,enjoy....
Please can you made an kernel without touchrecovery.
In touchrecovery it isn't possible to mount sd card!
I don't need touch, I need to mount sd card to usb!
Thanks
arcatarc said:
Hi all,this is an advanced version of te ics 4.1.A.0.562 Leaked kernel.
The only difference with stock one is Touch Recovery and min. freq. of processor set at 122 Mhz(for better battery drain).
I only have used the work of the great DOOMLORD,so every thanks is to him.
Install it with fastboot.
Remember:it is for Official or Leaked 4.1.A.0.562 firmware!
Update:To obtain root access enter in recovery and install the supersu zip in the attachment.
Click to expand...
Click to collapse
tnx! your work is great bro! it was so helpful with recently leaked official ICS ROM! and rooted it easily
Can we apply this patch to a locked BL neo v? Many thanks.
blue4you said:
Please can you made an kernel without touchrecovery.
In touchrecovery it isn't possible to mount sd card!
I don't need touch, I need to mount sd card to usb!
Thanks
Click to expand...
Click to collapse
See 1st post
Excellent Job... The First touch recovery With USB mount fixed...
was it fixed by DoomLord or you fixed it...
Where is Sirkay?... I want to kill him...
jjdoctor said:
Excellent Job... The First touch recovery With USB mount fixed...
was it fixed by DoomLord or you fixed it...
Where is Sirkay?... I want to kill him...
Click to expand...
Click to collapse
This time it's all my work...coool!
arcatarc said:
This time it's all my work...coool!
Click to expand...
Click to collapse
Then I feel like killing DoomLord too...
jjdoctor said:
Then I feel like killing DoomLord too...
Click to expand...
Click to collapse
Hi,Hi,Hi,Hi,Hi,Hi,
how do u fastboot it?
lokenok said:
how do u fastboot it?
Click to expand...
Click to collapse
You unzip it in fastboot folder rename it to boot.img them open command prompt in the folder and write the following: fastboot flash boot boot.img
Regards,
Me
works fine, thanks!
umm i cant find fastboot folder in flashtool folder or where should it be.. and i cant find the cmp
lokenok said:
umm i cant find fastboot folder in flashtool folder or where should it be.. and i cant find the cmp
Click to expand...
Click to collapse
press Volume Up while connect your usb, you'll see blue led.
and then afetr blue led do what?
lokenok said:
and then afetr blue led do what?
Click to expand...
Click to collapse
flash kernel. you can flash using flashtool. if you dont know how to do it, there's sticky tutorial thread
Sent from my ST18i using xda premium
i've tried to fastboot but it says root needed! but i already rooted neither recovery
icsulescu said:
You unzip it in fastboot folder rename it to boot.img them open command prompt in the folder and write the following: fastboot flash boot boot.img
Regards,
Me
Click to expand...
Click to collapse
Or simply : fastboot flash boot KernelToccoGrigio.img
I've tried several times to install the ROM, but the phone only wipe data and said then it successfully installed. I don't know what to do. I want this ROM a lot because of the BRAVIA Engine and because the ROM is awesome. Please help me...thanks !
PS: It's done! Please lock thread!
Did you flash the boot.IMG in from the rom zip via fastboot?
Sent from my HTC Desire X using xda app-developers app
Hello
I have the same problem than wanko97.
This is the first time I am rooting my phone.
I used nlooooo's tutorial for UNLOCKING OF BOOTLOADER and CUSTOM RECOVERY INSTALLING AND ROOTING.
For recovery.img I used TWRP v2.4.3
Then I followed instructions from the elegancia page.
After I selected the aplications I wonted to install, the phone only wipe the data and says it successfully installed. But it takes les then a seccond.
After reboot the OS does not load.
what am I missing?
the Elegancija instructions does not say anything about flashing boot.IMG...
Help plese
R: Can't install ELEGANCIA ROM
People please try with TWRP v2.4.1 and tell me if it works.
xpirt
xpirt said:
People please try with TWRP v2.4.1 and tell me if it works.
xpirt
Click to expand...
Click to collapse
Can you plese give me a link to download TWRP v2.4.1.
I don't know if it has to be specifically for Desire X, and i realy don't want to use the wrong one.
thank you
Hey
I managed to find TWRP v2.4.1 on this link, and i works. (thanks xpirt)
It installs the ROM normally. Now I only have to customaze the instalation.
Does anybody know if this ROM wil get any updates like for HTC Sensation??
I can't wait for updates
sralica said:
Hey
I managed to find TWRP v2.4.1 on this link, and i works. (thanks xpirt)
It installs the ROM normally. Now I only have to customaze the instalation.
Does anybody know if this ROM wil get any updates like for HTC Sensation??
I can't wait for updates
Click to expand...
Click to collapse
It should, but i haven't seen any members of the Elegancia team here for a long time...:fingers-crossed:
elegancia still not wrking
i followed all steps still its not working...
i hv twrp 2.4.1..
things i did..
1. put zip file in sd card
2. in twrp 2.4.1 i wiped cache, system, dalvick,
3. install frm sd card
4. clicked elegancia and aroma installer started
5. when finished, clicked on reboot
after reboot screen, it shows htc logo and below its written in red - 'developement purpose only....bla bla..'
waited for half n hour still nothing comes up...wat to do..
soham1990 said:
i followed all steps still its not working...
i hv twrp 2.4.1..
things i did..
1. put zip file in sd card
2. in twrp 2.4.1 i wiped cache, system, dalvick,
3. install frm sd card
4. clicked elegancia and aroma installer started
5. when finished, clicked on reboot
after reboot screen, it shows htc logo and below its written in red - 'developement purpose only....bla bla..'
waited for half n hour still nothing comes up...wat to do..
Click to expand...
Click to collapse
you didn't install boot.img
cant find full sense
i cant find full sense in elegancia rom...i nither find bravia engine2 .plz help
i hv installed the rom cant find whats is mentioned in it
hi
soham1990 said:
i cant find full sense in elegancia rom...i nither find bravia engine2 .plz help
i hv installed the rom cant find whats is mentioned in it
Click to expand...
Click to collapse
after installing the rom, u have to flash the boot.img file inside rom zip via fastboot. That has to be done separately in order to get the rom booting
Regards
hi
neXus PRIME said:
after installing the rom, u have to flash the boot.img file inside rom zip via fastboot. That has to be done separately in order to get the rom booting
Regards
Click to expand...
Click to collapse
so before and after installing rom i hv to flash it boot.img rite:angel:
if i am not rite plz acn u gv step by step procedure in brief... :cyclops:
soham1990 said:
so before and after installing rom i hv to flash it boot.img rite:angel:
if i am not rite plz acn u gv step by step procedure in brief... :cyclops:
Click to expand...
Click to collapse
hi
Connect your DX to PC
Place the downloaded "customrom".zip file on your sdcard
ReBoot DX into Recovery
Go to C:\ and extract the boot.img inside the "customrom".zip file to your disc.
Open a Command Prompt window and tape:
cd ..
cd c:\
-flash boot.img - write command in CMD: "fastboot flash boot boot.img"
or use this method:
extract this zip http://forum.xda-developers.com/attachment.php?attachmentid=1691120&d=1359612733 to c:\ + ( boot.img from "customrom".zip) and run .bat file
go to (CWM) or (TWRP) Wipe all Data/Cache/Dalvik Cache
select your downloaded .zip file from SD card and install
Reboot and enjoy
btw: you need adb and htc drivers
hi
nadzorni said:
hi
Connect your DX to PC
Place the downloaded "customrom".zip file on your sdcard
ReBoot DX into Recovery
Go to C:\ and extract the boot.img inside the "customrom".zip file to your disc.
Open a Command Prompt window and tape:
cd ..
cd c:\
-flash boot.img - write command in CMD: "fastboot flash boot boot.img"
or use this method:
extract this zip http://forum.xda-developers.com/attachment.php?attachmentid=1691120&d=1359612733 to c:\ + ( boot.img from "customrom".zip) and run .bat file
go to (CWM) or (TWRP) Wipe all Data/Cache/Dalvik Cache
select your downloaded .zip file from SD card and install
Reboot and enjoy
btw: you need adb and htc drivers
Click to expand...
Click to collapse
where should i get "customrom.zip"...i searched but i didnt get any eleglancia's customrom.zip.. plz help me to find it...thanxx
soham1990 said:
where should i get "customrom.zip"...i searched but i didnt get any eleglancia's customrom.zip.. plz help me to find it...thanxx
Click to expand...
Click to collapse
Is the whole ZIP you downloaded (Elegancia-Sense4.1-v1.0.0.zip)
xpirt
hi
xpirt said:
Is the whole ZIP you downloaded (Elegancia-Sense4.1-v1.0.0.zip)
xpirt
Click to expand...
Click to collapse
dude m srry , but what i can see is sense lite version..... i followed al steps bt unsuccessful..
what i did..
1. i flashed in recovery (for rom installitation)
2. after installation , i flashed boot.img in fastboot
3. i flashed it again boot.img (boot file frm zip)
4. u said to flash n follow dat steps...i did ... bt all i can see is sense lite version
plzzz help...sry for asking too much doubts
soham1990 said:
dude m srry , but what i can see is sense lite version..... i followed al steps bt unsuccessful..
what i did..
1. i flashed in recovery (for rom installitation)
2. after installation , i flashed boot.img in fastboot
3. i flashed it again boot.img (boot file frm zip)
4. u said to flash n follow dat steps...i did ... bt all i can see is sense lite version
plzzz help...sry for asking too much doubts
Click to expand...
Click to collapse
First you have to flash boot.img than flash ZIP file.
Elegancia ROM is Sense Lite, if you see Matte Skin as default and when you go on Information Setting you see Elegancia ROM v1.0.0 it will be installed.
xpirt
soham1990 said:
dude m srry , but what i can see is sense lite version..... i followed al steps bt unsuccessful..
what i did..
1. i flashed in recovery (for rom installitation)
2. after installation , i flashed boot.img in fastboot
3. i flashed it again boot.img (boot file frm zip)
4. u said to flash n follow dat steps...i did ... bt all i can see is sense lite version
plzzz help...sry for asking too much doubts
Click to expand...
Click to collapse
Extract downloaded (Elegancia-Sense4.1-v1.0.0.zip) and pick up only boot.img( this step is closed 4u)
Then copy Elegancia-Sense4.1-v1.0.0.zip (not extracted) to SD card.
Run CWM or TRWP and select from INSTALL menu this Elegancia-Sense4.1-v1.0.0.zip and push button RUN!!! :highfive:
and reboot system.
soham1990 said:
dude m srry , but what i can see is sense lite version..... i followed al steps bt unsuccessful..
what i did..
1. i flashed in recovery (for rom installitation)
2. after installation , i flashed boot.img in fastboot
3. i flashed it again boot.img (boot file frm zip)
4. u said to flash n follow dat steps...i did ... bt all i can see is sense lite version
plzzz help...sry for asking too much doubts
Click to expand...
Click to collapse
quadruple facepalm.jpg
elegancia is sense lite.
Flowed from my HTC branded muffin...
I prepared a stripped down version for NUBIA RED MAGIC 2.36 CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
I take out a lot of CN applications. You can flash over the OpenGAPPS and get Google applications, make the ROM more usable in the European countries.
DOWNLOAD
https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
Install:
- First: don't forget to backup your files, if you come from Global ROM you will need to erase also internal storage of your phone!
- you will need TWRP installed. Look how to in sakilxda's thread (thank you sakilxda! ): https://forum.xda-developers.com/red-magic/how-to/unlock-bootloader-flasah-twrp-nubia-red-t3828466
- Download Oppen Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
- copy the downloaded ROM and GAPPS in your phone's internal storage
- go in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
- go to install menu and chose the ROM add to zip list also the GAPPS you downloaded: IS IMPORTANT TO FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY!
- OPTIONAL: you can add also blu_spark r36 Red Magic's kernel (THANK YOU blu_spark) from: https://forum.xda-developers.com/red-magic/development/kernel-t3813055
- Wipe cache when finish and reboot!
Good luck!
Screen shots
Great! I am going to try now and will let you know the result. Thank you so much!
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
I faced the error: "invalid zip file format" ----> this is my mistake, sorry ^^
---------- Post added at 04:17 AM ---------- Previous post was at 03:55 AM ----------
I have flashed but stucking at " checking for updates"...
---------- Post added at 04:42 AM ---------- Previous post was at 04:17 AM ----------
I have passed the problem. I am feeling happy with this rom. Thanks a lot!
---------- Post added at 04:50 AM ---------- Previous post was at 04:42 AM ----------
@ABM30: could you please guide me to root it?
Flash magisk zip file check xda through twrp and then install the magisk manager apk like any other app.
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
strakell said:
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
Click to expand...
Click to collapse
If you stuck on searching updates: just push power button and slide the restart button.
After this it will start over but will pass the update chek!
For root: download the magisk.apk and Magisk-v18.1(18100).zip from download link that I have given.
Put them in your phones internal storage. Install magisk.apk and run it once.
Then go in recovery TWRP and instal Magisk-v18.1(18100).zip, wipe cahe when asked.
Restart phone =>ROOTED!
You can find Magisk also in google Play!.
Have fun!
strakell said:
How passed the problem can you tell us so if anyone faced it to know how to over passed it?
Click to expand...
Click to collapse
ok
1. The error: "invalid zip file format" ----> I forgot to extract the zip file that I download from Mega.nz .
2. Stucking at " checking for updates"... ---> I removed sim card then restarted. After that, I skipped all of setup steps. after all, I can access home screen launcher.
Now I found the bug: I can not access to "developer options" in settings
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
ABM30 said:
If you stuck on searching updates: just push power button and slide the restart button.
After this it will start over but will pass the update chek!
For root: download the magisk.apk and Magisk-v18.1(18100).zip from download link that I have given.
Put them in your phones internal storage. Install magisk.apk and run it once.
Then go in recovery TWRP and instal Magisk-v18.1(18100).zip, wipe cahe when asked.
Restart phone =>ROOTED!
You can find Magisk also in google Play!.
Have fun!
Click to expand...
Click to collapse
thank you, but where are download links of the magisk.apk and Magisk-v18.1(18100).zip that you told?
oh sorry, I have saw them: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
ABM30 could you please explain step by step how I can get twrp and how go back to official recovery so I can flash official ROM ,I really appreciate that!
strakell said:
ABM30 could you please explain step by step how I can get twrp and how go back to official recovery so I can flash official ROM ,I really appreciate that!
Click to expand...
Click to collapse
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
tlgod said:
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
Click to expand...
Click to collapse
Thank you very much for your time ,I think you forget to write in line 2 after the unlock bootloader what I have to type in adb for the custom recovery
tlgod said:
I can help you:
Download:
- Rom: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
-Open Gapps for ARM 64 - 8.1 nano (or micro/mini etc at your need - https://opengapps.org/)
1. Boot to bootloader and unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
2. flash twrp: twrp-3.2.3-x_blu_spark_v9.85_redmagic.img
3. reboot to recovery (twrp), copy the downloaded ROM and GAPPS in your phone's internal storage
4. in TWRP, Advanced Wipe: wipe Dalvik/Art Cache, Cahe, Syste, Data.
5. go to install menu and chose the ROM to flash
6. FLASH GAPPS IMMEDIATELY AFTER ROM, ELSE WILL NOT WORK CORRECTLY! (IT IS IMPORTANT!!)
7. Wipe cache when finish and reboot.
*There are some little different if you want to use official rom from CN ROM (you can find the full ROM here http://ui.nubia.cn/rom)
Download: CN Rom from the link above
1. Extract from the rom to get 2 files: "recovery.img" & "boot.img"
2. Copy "recovery.img" & "boot.img" to Minimal ADB and Fastboot, open command window from here.
3. reboot to bootloader (power off the device then back on with 'vol down' + power button)
4. unlock bootloader: "fastboot oem nubia_unlock NUBIA_NX609J"
5. Wipe your device.
"fastboot -w"
6. Flash recovery:
"fastboot flash recovery recovery.img"
7. Update your ROM.
fastboot update <CNRomFile.zip>
Your phone will update and automatically reboot into the new ROM.
Click to expand...
Click to collapse
THANK YOU tlgod! Well done!
There is also the alternative to go back to official ROM:
1. Download the official ROM - CN or Global - you can find links in this thread
2. Copy ROM in internal storage (preferable in root)
3. Go in Settings-System Update-Menu (3 dots in upper right corner) - local update
4. Choose the ROM you downloaded and install > if you choose CN ROM: you are back to original recovery, boot, ROM
5. If you want to go back to global ROM you will have some more steps: need to wipe all USER DATA and CACHE in original Recovery after update (this will erase your internal memory !!!!!!!!!!!!!!! so BACKUP BACKUP....!!!!!!, now the phone can be restarted.
Global ROM will encrypt your Phone!!!! therefore when you go from Global to CN or back you need to wipe your USER DATA and lost everything from internal storage!!!!!!!!!!!!!
You can watch also: https://www.youtube.com/watch?v=z5wOxvzxrfQ
Is in Spanish but ..self explanatory
strakell said:
Thank you very much for your time ,I think you forget to write in line 2 after the unlock bootloader what I have to type in adb for the custom recovery
Click to expand...
Click to collapse
In download link I given you can find everything you need: ROM, Magisk and now also TWRP: twrp-3.2.3-0-nx609j.img
it can be used for TWRP installing as mentioned by tlgod!
tlgod said:
ok
1. The error: "invalid zip file format" ----> I forgot to extract the zip file that I download from Mega.nz .
2. Stucking at " checking for updates"... ---> I removed sim card then restarted. After that, I skipped all of setup steps. after all, I can access home screen launcher.
Now I found the bug: I can not access to "developer options" in settings
---------- Post added at 06:48 PM ---------- Previous post was at 06:45 PM ----------
thank you, but where are download links of the magisk.apk and Magisk-v18.1(18100).zip that you told?
oh sorry, I have saw them: https://mega.nz/#F!xsFnkQDL!XQXUTVjq8xDfvG_OElXTYw
Click to expand...
Click to collapse
Yes, I put everything in one folder (ROM Magisk.apk and zip, twrp), so you don't need another link.
For developer bug: you need to root the phone and you will get acces to developer options!
P.S. Sometimes a restart is also a good option!
ABM30 said:
In download link I given you can find everything you need: ROM, Magisk and now also TWRP: twrp-3.2.3-0-nx609j.img
it can be used for TWRP installing as mentioned by tlgod!
Click to expand...
Click to collapse
Like this:
fastboot flash recovery twrp-3.2.3-0-nx609j.img
Is it correct?
strakell said:
Like this:
fastboot flash recovery twrp-3.2.3-0-nx609j.img
Is it correct?
Click to expand...
Click to collapse
rename the recovery twrp-3.2.3-0-nx609j.img to recovery.img and then: fastboot flash recovery recovery.img this is how it worked to me.
ABM30 said:
rename the recovery twrp-3.2.3-0-nx609j.img to recovery.img and then: fastboot flash recovery recovery.img this is how it worked to me.
Click to expand...
Click to collapse
Now I get it right. Thanks.
ABM30 said:
Yes, I put everything in one folder (ROM Magisk.apk and zip, twrp), so you don't need another link.
For developer bug: you need to root the phone and you will get acces to developer options!
P.S. Sometimes a restart is also a good option!
Click to expand...
Click to collapse
Thank you, I have done that and It works!
A little help please , I did the procedure to unlock bootloader and flash custom recovery all went ok right away from the fastboot mode I went to twrp which was in Chinese I change the language to English I didn't do anything enything else because for now I only wanted to have custom recovery to flash magisk, i reboot to ROM I had all nice till now but when I'm trying to reboot to recovery to flash magisk I can't find the twrp only official recovery ,what am I doing wrong?
strakell said:
A little help please , I did the procedure to unlock bootloader and flash custom recovery all went ok right away from the fastboot mode I went to twrp which was in Chinese I change the language to English I didn't do anything enything else because for now I only wanted to have custom recovery to flash magisk, i reboot to ROM I had all nice till now but when I'm trying to reboot to recovery to flash magisk I can't find the twrp only official recovery ,what am I doing wrong?
Click to expand...
Click to collapse
Unfortunately it has happened to me also at the beginning. My unlocking counter is at 20.
So you need to do the following:
Unlock your bootloader again, flash TWRP (again ), go through ROM install procedure (again) as I mentioned in 1st post, but this time put also blu_spark r36 Red Magic's kernel in zip list to be flashed. In this way the original kernel (which has some security measures implemented in it and in case of some modifications in ROM it will overwrite the recovery with a backup from internal memory, I think is located in DATA folder...) will be overwritten and recovery will be preserved. At least this procedure I find at this moment.
Good Luck!
i'm try Red Magic OS V3.06 android Pie, and new Game Mode are perfect, but not have gapp, im test flash gapp in twrp but not work, you can pls help me add opengapp to new rom.
Thanks you very much.
chipheo62 said:
i'm try Red Magic OS V3.06 android Pie, and new Game Mode are perfect, but not have gapp, im test flash gapp in twrp but not work, you can pls help me add opengapp to new rom.
Thanks you very much.
Click to expand...
Click to collapse
Till now I didn't succeed to, but keep working on.