Hey,
My touchscreen is not working, i have the official XXLD1 firmware.
I have tried:
Factoryreset - not working
InsecureKernel - not working
Flash ROM with ODIN - not working
http://www.youtube.com/watch?v=NRii97fCC0M&feature=youtu.be
Same problem
Hi,
Did you fix it?
I have the same problem...
Related
Hi,
I have SGS2 and i installed MIUI ROM in it.
I upgrade the 1.12.XX version from 1.11.XX version.
I forgot to take nandroid backup! , before upgrading !
The problem :
the gets hangs while playing games or using applications and after few mins' - its reboots.
this happens again after install MIUI ROM from 'scratch' [full rom download]! - 1.12.XX version
but the reboot problem, dosen't solve.
is there anyway to resolve this problem, or i reset the phone with STOCK ROM will resolve it ?
Hi,
I have made a custom kernel for the Verizon Note 2. I used a stock ramdisk to make a boot.img, to flash using ODIN
Now, my back and menu key are not working anymore
I have CWM v6 and Suck-It-Verizon root installed. I tried updating my TouchKey FW, but the code *#2663# (or *#*#2663#*#*) are not working. I also tried http://forum.xda-developers.com/showthread.php?t=2032117 , but it did not help.
When I flash stock ROM or a rom from another developer, the keys work fine.
Can someone point out what I might be doing wrong? I am using t0uscc_04_defconfig to build the kernel code
Hi Everyone,
I have an issue when I flash any ROM (except MIUI8) on my 6503 the ROM flashes fine, and system loads up fine, but when I click anywhere and the system wants to play the touch sound, it reboots. If I connect a USB digital headset to the phone, issue does not occur.
I also tried flashing the 6502 fix, which interestingly solves this issue for all the ROMs, but if i do this, the SIM card is not being detected.
So, what I am doing -
downgraded my phone to 4.4.4 with Flashtool
installed CWM via fastboot
wiped completely
---
also tried with TWRP flashed by other ROMs, issue is the same.
So I just don't really know what to do, or what do i do wrong, hope you can help, please.
Thank you.
danieel said:
Hi Everyone,
I have an issue when I flash any ROM (except MIUI8) on my 6503 the ROM flashes fine, and system loads up fine, but when I click anywhere and the system wants to play the touch sound, it reboots. If I connect a USB digital headset to the phone, issue does not occur.
I also tried flashing the 6502 fix, which interestingly solves this issue for all the ROMs, but if i do this, the SIM card is not being detected.
So, what I am doing -
downgraded my phone to 4.4.4 with Flashtool
installed CWM via fastboot
wiped completely
---
also tried with TWRP flashed by other ROMs, issue is the same.
So I just don't really know what to do, or what do i do wrong, hope you can help, please.
Thank you.
Click to expand...
Click to collapse
flash bootloop fix from here : https://mega.nz/#!AJcwERiQ!FUmk6eS5aoVsFSZ1f4WZIELIt7sckPCj11n0AIdCNzU
I am facing a strange issue..I unlocked the bootloader the official way. Installed RR rom latest. Flashed Agni kernel. It was working fine.
After I switched off the device and turned on I noticed that touch is not working... System reboot to normal but touch is fully gone..
I had to flash fastboot rom edl mode to bring back the system to normal...
What might be the reason for loss of touch... Anyone please help....
Don't flash a different kernel, just try RR first, boot and make sure it works.
Once that is done, then you can try flashing the kernel and see if everything works. If it doesn't, you have your answer.
Most custom ROMs are also builded just for their kernel so if u flash custom kernel then there is chance that ROM will not work as u expected. Just think about it when you are installing a custom kernel.
Today I did flash lite mode rom . It boots up but touch was not working...nothing was flashed even gapps.
Sometimes the recovery twrp too does not work.,touch lost. Now i suspect something wrong with the hardware.
But no issues with miui roms...Thats what makes me wonder
did you do it on the computer?
sibikallikkat said:
I am facing a strange issue..I unlocked the bootloader the official way. Installed RR rom latest. Flashed Agni kernel. It was working fine.
After I switched off the device and turned on I noticed that touch is not working... System reboot to normal but touch is fully gone..
I had to flash fastboot rom edl mode to bring back the system to normal...
What might be the reason for loss of touch... Anyone please help....
Click to expand...
Click to collapse
You may want to try installing Radon Kernel. I've got an aftermarket display which also didn't work with a custom rom (Lineage OS), but after flashing Radon Kernel it worked flawlessly. You may want o try Radon 5.0 as I'm having trouble with 5.1.
I started having this issue of screen not responding to touch at all after flashing the new EvoX build. However even after flashing stock ROM through fastboot the issue still persists. I flashed beryllium_global_images_V11.0.5.0.PEJMIXM_20191022.0000.00_9.0_global_995dc65d42
Could anyone help me?
Issue is solved. Flash v10.2.3.0 and touch should start working again. Now on latest EvoX and all is fine!