I've been using Hyperdroid version 4.4.7 for a while now, and It's without a doubt, the best rom I've used.
I tried upgrading to version 5.2.21, both using the Rom Tool, and fresh install manually through CWM recovery (Full wipe: Data/Cache/Delvik) and while the ROM loads up fine the 1st time after installation, when I apply the RTL patch through the "Tweaks" menu, the room simply Bootloops (Seeing the Samsung Galaxy S2 with the ! sign).
Anyone know what's causing this and how can this issue be fixed?
I wanted to post this on the hyperdroid thread, but I don't have permission since I don't have enough posts in this forum...
Thanks,
Miki
i got the same problem after updating to latest hyperdroid rom , but i directly went from miui to this after wiping all the 3 modes of data . all i get is a BOOTLOOP !
I am using Sony W8 with stock kernel. When I tried to install the Ginger DX v029, problems occured. I used CWM to install this rom with following steps:
1. Install custom rom -> reboot phone. Unfortunately, my phone got freeze when it booted to the gingerdx icon. I tried to reinstall many times but the problem was not solved.
2. wipe out-> install custom rom-> reboot. This time, the phone can boot to the main menu but the system file "has stop working"
Anyone know about these problems? Please help me!
Can anyone help me pls!!!
convevn said:
I am using Sony W8 with stock kernel. When I tried to install the Ginger DX v029, problems occured. I used CWM to install this rom with following steps:
1. Install custom rom -> reboot phone. Unfortunately, my phone got freeze when it booted to the gingerdx icon. I tried to reinstall many times but the problem was not solved.
2. wipe out-> install custom rom-> reboot. This time, the phone can boot to the main menu but the system file "has stop working"
Anyone know about these problems? Please help me!
Click to expand...
Click to collapse
I think u must flash ur phone with a kernel specially made for the custom rom u have installed..!
I hope if it could work!:good:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app
Hi, When ever i hard reboot my phone my efs gets corrupted, but for soft reboot it is good. In stock rom no such problem, but i tried many custom roms, it happens. Initially when the rom is installed it dosen't happen. After a few days, after installing a few apps it happens. I am not finding any help in this matter, please help.
Also can i change csc to inu (india) in custom rom, I have installed latest modem for my country (india). But my signal keeps fluctuating. I am using Slimkat 5.9 weekly 4982.
Thanks a lot.
Hello,
I have SGS3 i9300 that was installed on it Cyanogenmod 11 for along time and it working great!!
until i did some mistake because i have a problem with the power button and i thought it was the CM that cause this resets.... but now it's too late/
i fix the problem and tried to install CM11 back, but the phone showing black screen after the Samasung s3 logo... and nothing.
the steps that i try is:
1. install recover CWM and install ROMs.
2. install recover TWRP and install ROMs.
3. install Stock Rom from Odin.
4. install CM10 snapshot or CM11 nightly.
5. binary code reset.
6. install throw CM windows installer.
7. install BlissPop.
none of the above works :crying:
the only ROM that i manage to install where "Android Revolution HD 29.0"
PLEASE HELP ME....
thanks
were you running a custom kernel also?
Phantogenic said:
were you running a custom kernel also?
Click to expand...
Click to collapse
i don't know
but i do install Stock Rom
Does it not change to the Stock Kernel?
UP
up please i still get my phone work
i recently install stock rom 4.0.2
and this work but when i do upgrade with Kies or even Odin to new version
i get this problem with the black screen immediately after the Smasung S3 logo :crying:
please help