Im a new owner of the Note 2 and a new member to XDA. I have been doing a lot of reading over the last couple days regarding unlocking the bootloader, flashing CWM and rooting my phone. My question is, is there a certain order that this has to be done in. For example, the bootloader then the recovery or does it not matter
Sent from my SCH-I605 using xda app-developers app
kevinbauman said:
Im a new owner of the Note 2 and a new member to XDA. I have been doing a lot of reading over the last couple days regarding unlocking the bootloader, flashing CWM and rooting my phone. My question is, is there a certain order that this has to be done in. For example, the bootloader then the recovery or does it not matter
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Read the unlock post in the dev section....
I have but I will reread it again, just want to make sure I fully understand everything before I start.
Sent from my SCH-I605 using xda app-developers app
Hint: You can't load anything until you unlock the bootloader.
Adams guide in original development http://forum.xda-developers.com/showthread.php?t=2043636
Follow this and you will be unlocked rooted and twrp
Thanx man
Sent from my SCH-I605 using xda app-developers app
kevinbauman said:
My question is, is there a certain order that this has to be done in. For example, the bootloader then the recovery or does it not matter
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
1.Flash revision3 via odin following the guide in its thread. (This will give you root)
2.Follow the bootloader unlock process in adam's guide from its thread (this will unlock your bootloader and unless hes changed it flash twrp a custom rocovery.)
Now you need to reboot into recovery and make a back up. To do this you need to go into recovery (twrp or clockwork mod). You can get to recovery by powering off the phone and holding volume-up+home+power. Now go to backup and back up. If you have an external sd I would recommend selecting the option to backup to it.
After that select a rom you want. If you want stock rooted you dont have to flash anything. Look in your app drawer if you see an app called supersu or super user you're rooted. If you want another rom follow these steps to flash it.
1. Read rom thread for known bugs so you know what youre getting into.
2. Download rom. DO NOT UNZIP.
3. Check md5 sum.
4. Move to external or internal sd where you can find it.
5. Boot into recovery.
6. Select install.
7 navigate to rom file.
8. Swipe to install. If it has aroma follow instructions if not wait for it to do its thing
Sent from my SCH-I605 using xda app-developers app
My bootloader is officially unlocked. To easy, I think it took me less than 5 minutes. Thanx for your help.
Travisdroidx2 said:
Adams guide in original development http://forum.xda-developers.com/showthread.php?t=2043636
Follow this and you will be unlocked rooted and twrp
Click to expand...
Click to collapse
Evankovich406 said:
1.Flash revision3 via odin following the guide in its thread. (This will give you root)
2.Follow the bootloader unlock process in adam's guide from its thread (this will unlock your bootloader and unless hes changed it flash twrp a custom rocovery.)
Now you need to reboot into recovery and make a back up. To do this you need to go into recovery (twrp or clockwork mod). You can get to recovery by powering off the phone and holding volume-up+home+power. Now go to backup and restore back up. If you have an external sd I would recommend selecting the option to backup to it.
After that select a rom you want. If you want stock rooted you dont have to flash anything. Look in your app drawer if you see an app called supersu or super user you're rooted. If you want another rom follow these steps to flash it.
1. Read rom thread for known bugs so you know what youre getting into.
2. Download rom. DO NOT UNZIP.
3. Check md5 sum.
4. Move to external or internal sd where you can find it.
5. Boot into recovery.
6. Select install.
7 navigate to rom file.
8. Swipe to install. If it has aroma follow instructions if not wait for it to do its thing
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Nicely written!
Travisdroidx2 said:
Adams guide in original development http://forum.xda-developers.com/showthread.php?t=2043636
Follow this and you will be unlocked rooted and twrp
Click to expand...
Click to collapse
It seems like CWM is the preferred recovery among most flashers and ROM developers. But I could be mistaken. Somewhere on xda or elsewhere I read a comparison of the 2.
Personal preference I used to use cwm but once I made the switch to twrp I did not look back. However some roms like cm10 say you must use cwm.
I used cwn on my nexus and twrp on my note 2. It seems if its touchwiz they recommend twrp if its aosp sourced they recommened cwm
Sent from my SCH-I605 using xda app-developers app
Sorry if this was addressed elsewhere, but I did try to seek it out first. I am stock rooted (Exynos abuse method) and I have added in the all apps in multiscreen modification. Two questions:
1. From what I can tell, I do not need to flash revision3 first (since I am stock VRALJB rooted), just run the casual exploit and then flash suckitverizon, correct?
2. Does the add apps to multiview mod conflict in any way with unlocking the bootloader or flashing a new ROM?
I think I know the answer to both (yes and no respectively), but I like to measure twice and cut once. Thanks
Im not exactly sure. But in all honesty it would probably just be best to odin flash to stock and start over.
Sent from my SCH-I605 using xda app-developers app
tfly212 said:
Sorry if this was addressed elsewhere, but I did try to seek it out first. I am stock rooted (Exynos abuse method) and I have added in the all apps in multiscreen modification. Two questions:
1. From what I can tell, I do not need to flash revision3 first (since I am stock VRALJB rooted), just run the casual exploit and then flash suckitverizon, correct?
2. Does the add apps to multiview mod conflict in any way with unlocking the bootloader or flashing a new ROM?
I think I know the answer to both (yes and no respectively), but I like to measure twice and cut once. Thanks
Click to expand...
Click to collapse
1. just did everything yesterday. i rooted with the exynos exploit but couldn't get odin to flash suck it verizon, so i rooted with casual, unlocked the bootloader with odin, which also installed twrp. i then hooked it up to my computer, copied clean rom to the sd card, and installed. no need to install revision if you don't want to. go straight to beans/cm10/PA/cleanrom or whatever else you want.
summary - root, unlock bootloader, install whatever rom you want. no need to install roms then overwrite those roms
2. if the rom is TW based, you can make any app multiview. beans and cleanrom come with the modification there already afaik. cm1-/aosp roms don't have it, as it's part of touchwiz
Followed the advice to flash back to bone stock, then unlocked the bootloader and flashed cleanrom. Piece of cake as advertised. Only hiccup was getting Odin to recognize my phone...had to start it a second time, but that was it. Thanks for the help.
hey guys im trying to unlock my bootloader as we speak and i cant get it to work it says my adb server is out of date. killing...
ADB server didn't ACK* failed to start daemon *error: protocol fault (no status) please help this is the first device ive had problems with thank you verizon
Related
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
jerseybizzle said:
Hello,
I've been all over google and this site for the last two days trying to find a way to get my Evo 3d work! I tried searching the forum and unfortunately i kept getting server errors So i figured I would make a new thread in the hopes of figuring this out!
What happened:
I went through the rooting process, and I went to flash a ROM on to the phone and it would not load pass the HTC screen. I had a ROM on there of the stock version of the Sprint Evo 3d, unfortunately it wasn't the proper version and it did not allow 4G and such. So i tried to place another ROM on to the SD Card and flash it over, and for some dumb reason, I deleted the version of the Stock Rom that atleast enabled me to get the phone to turn all the way on. All I'm able now is to boot up to recovery, but I can't figure out what ROM to download to place on the phone to get me back to square one!!!
Help please!!
-Mike
Click to expand...
Click to collapse
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
wikdNoob said:
Hi jerseybizzle, I can certainly try to help you but you have to help me first.
1. Are you doing a factory reset and wiping dalvik cache before flashing?
2. What hboot version do you have?
3. Is your phone s-on or s-off?
4. Which rom did you try to flash that wouldn't boot?
Click to expand...
Click to collapse
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
If it was an ics Rom and you are having bootloops, it is most likely because you are s-on. I recommend getting s-off. The wire trick is easy to do, but you need to be careful.
http://forum.xda-developers.com/showthread.php?t=1585846
Sent from my ICS 3VO with Tapatalk 2
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
jerseybizzle said:
1. Yes
2. 1.50
3. My phone says S-on but I have super user privileges and the guide I followed said I have the phone rooted whether or not it said S-Off or S-On.
4. I believe it was the ViperMod
Click to expand...
Click to collapse
I'm guessing it was the ics version of vipermod, and since you're s-on your boot image didn't flash. So you're trying to boot an ics rom with a gingerbread kernel.
If you want to use an ics rom, you have a few choices. My favorite... Put a recovery image in the folder on your computer that has fastboot in it. Put the phone in fastboot mode and type in the command window, fastboot boot recovery.img, make sure that you name the recovery image on your comp. to "recovery.img". It should boot to recovery and you can flash away.
Something that's easier is to use 4ext recovery smart flash. I'm sure it works but I've never used it.
If you want to get back to your stock rom unrooted rom you could run an ruu.
Also, take coals advice and s-off that phone, you won't have nearly as many issues once you s-off, and you can use one of the splash screens in my Sig
flonker said:
Did you flash the rom through fastboot? If you just booted into your recovery and attempted to flash the ICS version of that rom coming from GB it won't work since you still have S-ON and that doesn't let you flash certain things like kernels. You can still flash roms but you have to take a couple extra steps or achieve S-OFF.
To get your phone working again...
If you were just coming from a stock rooted rom before attempting to flash a new rom, simply download a stock rooted rom from the dev section, put it on your SD card, boot into recovery, wipe and reflash. Your phone should then boot up again.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
wikdNoob said:
Here's an idea, get flash image GUI, its free here at xda, google it. Then use it to flash the kernel from the stock rom that you have running and reboot. This should fix your WiFi. Let me know if I'm not being clear enough.
Click to expand...
Click to collapse
Where would I find the stock Kernel?
jerseybizzle said:
I have a stock ROM finally loaded on to here now, but it won't allow me access to Wifi now! When I try to connect it just says "error". Any ideas?
Click to expand...
Click to collapse
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
jerseybizzle said:
Where would I find the stock Kernel?
Click to expand...
Click to collapse
Inside the rom that you flashed, just choose that rom with flash image GUI and it'll pull the kernel out for you
flonker said:
So, it sounds like wifi turns on just fine, you just get the error when attempting to connect to a network?
Have you tried resetting your router and rebooting your phone? Maybe remove that network from your saved preferences and resign in.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
jerseybizzle said:
The wifi won't turn on period. I'll click the icon for the Wi-Fi to turn on, and it just says error. No option to even try to connect!
Click to expand...
Click to collapse
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
flonker said:
If the app that was suggested to didn't do the trick, hit the stickies in the dev section on how to flash a rom with hboot 1.5 S-ON. I recommend the fastboot method, however, if you're so inclined, you can also go the route of getting S-OFF.
Most likely, some problems occurred when you tried to flash that ROM before and broke your wifi. So, if I were you, I'd grab a ROM (that viper ics should be fine if you still got it) and flash it through fastboot using a guide in the dev section. Be sure to read and understand the guide before attempting it.
The guide would be something like this...
1. Install the appropriate drivers and place a recovery on your PC.
2. Boot into your boot loader, select fast boot, and connect your device to your PC via USB.
3. Open a command prompt on your computer, switch to the directory containing drivers/recovery image
4. Type fastboot boot thenameofyourrecovery.img
5. Install the rom as you otherwise normally would using your phone, wiping data, clearing caches, installing zip.
NOTE: The above is not a guide, just an illustration of the guide you're looking for in the dev section.
Flashing a rom by this method allows you to flash roms with non stock kernels, so you can pretty much flash any rom made for your phone. This is the method I have used since day 1 and have never experienced any problems. You may also want to look into getting S-OFF, but I can't say much about that because I haven't done it myself (being content flashing through fastboot).
Hope this helps.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
jerseybizzle said:
Thanks. I ended up finally finding a ROM (CM) that would load on to the phone. The Wi-Fi is working now!
I just need to find a fix for the camera, neither the regular nor 3D camera will function now.
Click to expand...
Click to collapse
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Wikd said:
Which cm rom exactly? I thought the camera works with all the cm roms. It sounds like you still have kernel issues, and until you figure out how to flash a kernel or boot image, you'll always have these types of issues, bootloop, broken WiFi/camera. I know that the instructions that flonker gave you are intimidating but after you've done it once you'll see how simple it is.
One limitation of HTC dev unlocking is that you can't write to the boot partition from recovery, the kernel resides in the boot partition. You can, however, write to boot from within the android system. That's why flash image GUI is so handy for people with s-on and HTC dev unlocked. Just open the app, find the rom you'd like to flash and select it, the GUI will extract the kernel from the rom zip and flash it. Then you just boot into recovery and flash the same rom that you selected with the GUI. It'll flash everything but the boot image, but that's ok because you already flashed the kernel with flash image GUI. Make sure you do a factory reset and wipe the dalvik cache.
When I was s-on I always chose fastbooting to recovery, when you do that it actually loads the recovery onto the boot partition and gives you permission to write to boot, so its like flashing should be. Just wipe, flash, enjoy.
Hope this helps.
Click to expand...
Click to collapse
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
flukeSG2 said:
I have been flashing roms and kernels and such for awhile on several different phones and literally almost everything you said makes no sense and that goes for the other guy 2 posts above yours. WTF is flash image GUI? Is that an app, you never even say.
The other guy is telling him to flash a rom but describes to him how to flash a recovery image to his phone...have you guys ever done this before or are you just making stuff up as you go?
Click to expand...
Click to collapse
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
RayTrue04 said:
Those guys probably don't even have EVO 3D's anymore. Do you read dates before posting? Threads a year old :screwy:
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Yes I do, I was looking for information and I read the entire thread. Just because they posted it a year ago doesn't make the info any less wrong.
I've asked for help in the threads posted about the OTA update and I cannot get the help I need. I've seen people post similar questions that I have and they are largely ignored. I had to stay away from the forums because I was getting so damn angry.
I have root and I have S-Off. I have not flashed any ROMs on this phone. I want to apply the OTA update but I do not know how to do that.
There's mentions of flashing firmware, radios, PRIs, PRLs, ROMs, Deoxed, Oxeded, hboot, bootloader, recovery, TWRP, etc. All of that across multiple threads does not compute well in my head.
I've read a lot and I am not sure what to do. Can someone please help me out? I will be forever grateful. I could send you a case for your phone for helping me. I promise I am not being lazy. I'm just not getting it.
If you're rooted and you have S-Off, you should have TWRP. First verify that by booting into the bootloader (Power + Vol Down) and going to Recovery.
Once in TWRP, do a backup. Backup everything. This way if something goes wrong you can restore your previous ROM.
Next download this: http://d-h.st/d2a
It's the firmware zip, courtesy of Haus. Rename the file to remove all of the stuff after PJ85IMG. Then put it on the root of your SD card and boot into the bootloader. It will scan for a zip and find it, and ask you if you want to update. This step is optional; you can flash new 1.22 ROMs without the new firmware.
After flashing that through bootloader, you can choose a 1.22 ROM that looks good to you, and download it. Boot back into TWRP, do a factory reset and wipe System, and then install the ROM. If you download it to your external SD card (in other words, an SD card you put in yourself), you'll have to mount it by going to Mounts and choosing external SD. That way you'll be able to access files on it.
To install the ROM after wiping, just hit Install from the main menu of TWRP and navigate to the location of the ROM zip you downloaded. Install it and reboot, and there you have it, you're on the new firmware and using a ROM with the new fixes in it!
The firmware zip is optional, but recommended. If you aren't comfortable flashing it, don't bother.
Sent from my EVO using xda premium
SoraX64 said:
If you're rooted and you have S-Off, you should have TWRP. First verify that by booting into the bootloader (Power + Vol Down) and going to Recovery.
Once in TWRP, do a backup. Backup everything. This way if something goes wrong you can restore your previous ROM.
Next download this: http://d-h.st/d2a
It's the firmware zip, courtesy of Haus. Rename the file to remove all of the stuff after PJ85IMG. Then put it on the root of your SD card and boot into the bootloader. It will scan for a zip and find it, and ask you if you want to update. This step is optional; you can flash new 1.22 ROMs without the new firmware.
After flashing that through bootloader, you can choose a 1.22 ROM that looks good to you, and download it. Boot back into TWRP, do a factory reset and wipe System, and then install the ROM. If you download it to your external SD card (in other words, an SD card you put in yourself), you'll have to mount it by going to Mounts and choosing external SD. That way you'll be able to access files on it.
To install the ROM after wiping, just hit Install from the main menu of TWRP and navigate to the location of the ROM zip you downloaded. Install it and reboot, and there you have it, you're on the new firmware and using a ROM with the new fixes in it!
The firmware zip is optional, but recommended. If you aren't comfortable flashing it, don't bother.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thank you Sora! I am going to follow your advice this afternoon and will let you know how it goes.
http://forum.xda-developers.com/showthread.php?t=1770501
This way will not cause you to lose any data, and installs the update on top of what you already have. Still recommend a backup in TWRP first, though
Robbie_G said:
http://forum.xda-developers.com/showthread.php?t=1770501
This way will not cause you to lose any data, and installs the update on top of what you already have. Still recommend a backup in TWRP first, though
Click to expand...
Click to collapse
I would personally recommend staying away from that method. As a rooted user you should never accept an ota. Doing it that way might work this time, but in the future there's no guarantee you won't lose s-off and never be able to get it again
Sent from my EVO using Tapatalk 2
Rxpert said:
I would personally recommend staying away from that method. As a rooted user you should never accept an ota. Doing it that way might work this time, but in the future there's no guarantee you won't lose s-off and never be able to get it again
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I know "never OTA" is your and some other people's mantra, but being able to do this is one of the benefits of S-off. I agree it is possible they could turn you back to S-ON in a future OTA (maybe...), but since it works for this current update, I don't think you should be dissuaded if you don't want to completely wipe your phone.
Robbie_G said:
I know "never OTA" is your and some other people's mantra, but being able to do this is one of the benefits of S-off. I agree it is possible they could turn you back to S-ON in a future OTA (maybe...), but since it works for this current update, I don't think you should be dissuaded if you don't want to completely wipe your phone.
Click to expand...
Click to collapse
It's a bad habit to start, and all he has to do my way is flash a ROM..
Sent from my EVO using xda premium
SoraX64 said:
It's a bad habit to start, and all he has to do my way is flash a ROM..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
My man.
Exactly.
Just look at all of the people who show up on here going "Oh crap I took the OTA and now I can't get S-OFF"! The fact of the matter is, people don't check here before taking the OTA. If they look here and see that thread that says to just put on teh stock recovery and you're A-OK, thats what they'll do from then on.
When it happens, I'm just going to sit back and say "toldya so"... and let everyone else deal with the support. Until then, I'm going to keep preaching that you should never take an OTA if you are rooted or EVER thinking about rooting.
Sora, I looked at your instructions. I flashed ROMs before on my EVO 4G. That process I was comfortable with. Basically, the developer did all the work for me. I wanted to keep my phone stock for a while but I do want the updates.
cubbieswin said:
Sora, I looked at your instructions. I flashed ROMs before on my EVO 4G. That process I was comfortable with. Basically, the developer did all the work for me. I wanted to keep my phone stock for a while but I do want the updates.
Click to expand...
Click to collapse
It really comes down to this, if you're still having problems:
If you have recovery, just flash a ROM with the new base. Just like you'd do on your old Evo.
Sent from my EVO using xda premium
SoraX64 said:
It really comes down to this, if you're still having problems:
If you have recovery, just flash a ROM with the new base. Just like you'd do on your old Evo.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Ok, so I will have to flash a ROM. Do you think I can flash the deodexed version of this [ROM][STOCK] --- Stock Rooted 1.22.651.3 Odexed & DeOdexed (7/14/12)--- over my stock-from-Sprint setup?
I flashed TWRP. I'm going to update the firmware next with the file you pointed me to. I'm trying to find the info on clearing Google wallet.
...then the ROM.
Clearing GW data should say something about resetting it. It'll be in the app settings.
Seems like you've got it down now, I'm glad to say. You'll be able to flash that ROM without any issues.
Sent from my EVO using xda premium
SoraX64 said:
Clearing GW data should say something about resetting it. It'll be in the app settings.
Seems like you've got it down now, I'm glad to say. You'll be able to flash that ROM without any issues.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Sora, how do you flash your ROMs? Do you use TWRP? or something like Goo Manager? I haven't used Goo Manager before, but I see it flashes ROMs.
I'm not necessarily new to rooting I've been doing it for a year or so on my old phone. But after upgrading I decided not to root for a while. Now I think I'm ready to root and get a custom rom on. I'm not used to the whole unlocking bootloader and then a different way of rooting from my old phone. Any sort of guide with links would be greatly appreciated!
Sent from my HTC6435LVW using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2314771
Get some moonshine.
Sent from my HTC6435LVW using Tapatalk 4
just thought i'd add something
you need s-off because verizon or htc stopped allowing the dna to unlock its bootloader from their htcdev site
once s-off you can flash any rom, kernel or recovery
you do not need to unlock your bootloader
the link i found was dead so here is cwm touch recovery that i use http://s000.tinyupload.com/index.php?file_id=17561816589933340240
I think every rom available is already rooted so thats taken care of
i just read some of the guides that are up and they are outdated, so ask anythting you need here and ill help
OK sorry about that I meant s-off. So I do moonshine flash cwm and then do I have to install super user?
Sent from my HTC6435LVW using xda app-developers app
nope all the roms are pre rooted with SU or superSU
but in case im wrong and you find a rom without root you can flash SU or superSU from recovery
hit "thanks" plx
simplified steps are:
1. s-off
2. flash recovery through adb
3. put the rom or rom and kernel you want on the phone and flash it in the recovery
thats it. its a bit simpler than most phones i think, especially samsungs as i just found out.
Step 1. S-off via Moonshine.
Step 2. Flash a recovery. I think the absolute easiest way is using this toolkit. This toolkit couldn't get any easier to use.
http://forum.xda-developers.com/showthread.php?t=2219175
Step 3. Flash whatever ROM you choose. I personally love ViperDNA.
Does moonshining wipe your data?
Sent from my HTC6435LVW using xda app-developers app
Nope... but sometimes the moonshine process will have problems that are typically resolved by doing a factory wipe, in order to sucessfully do the process.
OK now I'm coming from a Samsung device so it was a lot harder than this. My question is if I have to wipe data before flashing a rom or a recovery? I would also like to know what the adb is.
Sent from my HTC6435LVW using xda app-developers app
maceprimus said:
OK now I'm coming from a Samsung device so it was a lot harder than this. My question is if I have to wipe data before flashing a rom or a recovery? I would also like to know what the adb is.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
once you have the recovery installed you can choose "factory reset/wipe data" from the cwm menu along with wipe cache, also dalvik cache in the advanced menu in cwm, i do this before i flash any rom
ADB is how you flash a recovery and some kernels
but you need this driver installed http://www.htc.com/www/software/htc-sync-manager/?section=Requirement
you also need that driver installed for moonshine to work but after you install it you need to remove the htc sync manager part of it
http://forum.xda-developers.com/showthread.php?p=42407269
here is a small adb and fastboot setup
once installed you can put the cwm recovery in the same folder as adb open a cmd window and from the directory that has adb and the cwm you type
"adb reboot bootloader" no quotes
then
"fastboot flash boot clockwork-touch,img"
now you have recovery
I realize these instructions assume some levels of knowledge so if you need more details ask
I have done all you said and now have a rooted dna! the only problem is every time I select reboot from the cwm it just reboots to the recovery and not the actual phone? Any Idea of whats going on here?
ah it sounds like you wiped your rom before you transferred a new one to your phone
did you do a backup of your stock rom?
this recovery isnt perfect i dont think you can mount the sd card in it to transfer files
if you have no backup and no rom package on your phone and you wiped your stock installed rom then ive actually never come into this situation
im sure it can be resolved easily, let me test some stuff on my phone ill get back to you in a bit.
in the meantime does anyone else have any suggestion for this?
maybe team win recovery can mount sd?
hyphydragon said:
ah it sounds like you wiped your rom before you transferred a new one to your phone
did you do a backup of your stock rom?
this recovery isnt perfect i dont think you can mount the sd card in it to transfer files
if you have no backup and no rom package on your phone and you wiped your stock installed rom then ive actually never come into this situation
im sure it can be resolved easily, let me test some stuff on my phone ill get back to you in a bit.
in the meantime does anyone else have any suggestion for this?
maybe team win recovery can mount sd?
Click to expand...
Click to collapse
I did not make a backup and I don't have any roms on the phone. I'm not exactly sure of how all this happened and I would really like to get everything worked out.
ok you can install the TWRP recovery and sideload the rom
you can google the info about how to do it, i dont know much about sideload
here is the TWRP recovery, flash it the same way as the other
http://techerrata.com/file/twrp2/dlx/openrecovery-twrp-2.6.0.0-dlx.img
info about sideloading http://teamw.in/ADBSideload
have you decided on a rom yet? id recommend a sense5 like digital dream or BAMF by joelz, thats what ive ran for a while now
if you want to get this done in a more timely manner you can chat me on skype its bigvtec916
hyphydragon said:
ok you can install the TWRP recovery and sideload the rom
you can google the info about how to do it, i dont know much about sideload
here is the TWRP recovery, flash it the same way as the other
http://techerrata.com/file/twrp2/dlx/openrecovery-twrp-2.6.0.0-dlx.img
Click to expand...
Click to collapse
It seems as if I can sideload from cwm as well. And how could I install the twrp recovery if I cant boot into the desktop
I would like to either install a sense 5 rom like you suggested or cyanogen mod. Im not so sure how to flash the twrp recovery if im only in the cwm recovery.
you can hold power and vol down, once it reboots after about 10 sec you let go of power and keep holding vol down till you see the bootloader screen, you can flash the recovery using adb like you did to get cwm on
ok never mind I figured out how to get the twrp flashed. now I will try to sideload
I would like to skype but I didnt build my pc with a camcorder. I can still do sound though, tell me if your okay with that. Ok now when I try to sideload it tells me that it cant find the device? not sure what that is.
i was just going to skype for chatting with text so its not like post and wait and refresh, takes forever
in the recovery there is a setting you activate to sideload you are using that right?
Hi please please help,i have another pending issue but i doubt anyone will help. This issue is very straightforwards please help.
I am in android recovery mode. I select "apply update from sdcard"
I have on my sd card a backup i made from titanium backup app.
Clearly the two arnt compatible im guessing i need a .zip file. PLEASE where can i find a backup file to put on my sd card for gingerbread 2.3.4
I have mb860 (moto atrix 4g)
I'm not sure if I'm following you, are just trying to restore apps that were backed up in titanium? Or a full ROM? Do you have stock or a custom recovery? Did you make an update.zip in titanium or just backup the apps?
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
I'm not sure if I'm following you, are just trying to restore apps that were backed up in titanium? Or a full ROM? Do you have stock or a custom recovery? Did you make an update.zip in titanium or just backup the apps?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Sorry for not making any sense, ill post my problem in the most logical way i can in the atrix4g forum. But basically i moved an app called system tuner out lf my /system folder and this instantaneously made my phone not work and go to a battery screen. I made a backup but kept the .zip on the phone and moved the app user data to my pc. Basically i messed up. I thought i could use the sd card to restore all the information that i think was deleted but i guess im wrong... I need to use a sbf file or adb mode.
Every single file on xda which contains the sbf file i need is a broken link and the last three were virus's (granted the linker said he had no liability)
Im just desperate for a working phone..... I can load it up and it goes to a battery charging screen... Or i can select from modes like fastboot and abd...
I have everything installed just like back when i programmed... The sdk adb everything... But no working files AND I DONT KNOW HOW TO GET INTO ADB MODE TO LAUNCH A SHELL!!!!!!
Well if you have no custom recovery (which it sounds like) then use fastboot to flash a new recovery (so long as your bootloader allows. Then within this new recovery you should have adb access and also the ability to just flash a new ROM.
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
Well if you have no custom recovery (which it sounds like) then use fastboot to flash a new recovery (so long as your bootloader allows. Then within this new recovery you should have adb access and also the ability to just flash a new ROM.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Apparently my bootloader is locked and i cant flash cwm to the recovery partition.. So i try to unlock bl with two seperate methods and still i get
(bootloader) EOM unlock not implementable.
I think its wrong files like the sbf thing wrong files? Idk... If u can help ill love you... I also have rsd lite.. I have everything lol just need a way to get into abd (unlock bl) or sbf..
Unfortunately I know little about Motorola phones as I've never owned one and haven't read to deeply about them, the best I can do is ask in your phone forum what the appropriate steps are
I assume if you read the stickied thread there should be something to help you along
Best of luck, and if you can't find what you need ask again and I'll dig into it
Sent from my Nexus 4 using Tapatalk 2
Does anyone have a quick write up of how to do this? I have an HTC one and I have been running the Insert Coin roms, but now the new roms require TWRP and I dont want to end up with a bricked phone.
sjorge3442 said:
Does anyone have a quick write up of how to do this? I have an HTC one and I have been running the Insert Coin roms, but now the new roms require TWRP and I dont want to end up with a bricked phone.
Click to expand...
Click to collapse
Easiest way is to install GooManager > Grant SuperUser access > Menu > Install OpenRecovery Script > Confirm > Wait for it to download & finish.
https://play.google.com/store/apps/details?id=com.s0up.goomanager
http://teamw.in/project/twrp2 > It's explained here, along with the other methods. Just click on the Get TWRP for Your Device box at the top right and put in HTC One, then make sure to pick the right one. The recoveries are different between manufacturers and the M7/M8, obviously.
Pretty hard to brick install recovery on these things.
I would suggest just using fastboot, fastest and safest method
fastboot flash recovery nameofrecovery.img
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
I would suggest just using fastboot, fastest and safest method
fastboot flash recovery nameofrecovery.img
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's my preferred way to do it too, but TWRP themselves have the app install as their preferred way on their site.
So does clockwork and 4ext but I prefer fastboot. Choice is for the user I guess
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
So does clockwork and 4ext but I prefer fastboot. Choice is for the user I guess
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Indeed. Another reason to suggest the app as it is more friendly to the timid ones.
It really does pay to get familiar with both fastboot commands and adb though, if you plan to mod your phone. At least to make sure that the drivers are loaded in worst case scenarios.
As far as I understand it, CWM or TWRP run in temporary partitions and in the RAM, much like boot tools on a PC such as Pmagic.
I started off with CWM via Odin on the PC and have since managed everything from there. I tried out TWRP by using a flashable zip in CWM, rebooted the usual way via the gui, tried out TWRP, then flashed CWM back and everything is fine.
It seems to me there is no danger and you just flash it the way you would a custom firmware. Plus you can back up and restore your recovery using either CWM or TWRP. In my short experience with it so far, you don't need an app, just flash and be happy. But always remember to have a backup or the original zip in case you wish to go back.
And if somehow you do mess something up (I guess it happens sometimes), make sure you have the right md5 to reflash in Odin. Simple. Just never delete anything you could need again.