Hi folks. As you can see this is my first post, so please forgive me for any mistakes.
Now to my problem
I have a galaxy s ii GT i9100 (bought in august 2011)
I was on x(jellybean) rom when my phone stopped recognising internal sd storage, this annoyed the hell out of me.
so I searched online and found that the best solution was to flash the phone with samsung official android 2.3 gingerbread.
So I tried to flash the firmware and pit file acquired from sammobile ( please refer to attachment) via ODIN.
I failed to notice that the Re-Partition box was checked and started the flashing process, which stopped in the middle and the phone turned off.
Thats the last I have seen my phone with signs of any form of life.
Now my phone doesn't
turn on(no recovery/download)
when i put it on charge the area near the camera heats up but no sign of life
I have tried every thing possible to bring it back to life(download mode), but to no luck
So my question is, will JTAG repair work for my device? is there any other way I can bring my phone back from the dead?
Finally: If any of you know a technician in Sydney who can do such repairs, please do provide details
Thanks for your help and support
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
911-Future_Maker said:
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
Click to expand...
Click to collapse
I think he did that on purpose.
You're a very brave man putting that level of certainty on it being JTAG'able. I'd happily take the other side of that wager a couple of times because I know I'd collect more often than 0.1% of the time
OP - You're only going to know if it's JTAG'able if/when someone qualified physically takes a look at it with the necessary equipment.
Edit - Re: someone in Sydney who does them, best bet is to contact mobile repair places. I'd be surprised if you don't find one eventually (they don't tend to mention it in ads as they don't normally do many).
911-Future_Maker said:
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
Click to expand...
Click to collapse
911-Future_Maker said:
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
Click to expand...
Click to collapse
Usb Jig didn't work for me, so my only option is JTAGing
MistahBungle said:
You're a very brave man putting that level of certainty on it being JTAG'able. I'd happily take the other side of that wager a couple of times because I know I'd collect more often than 0.1% of the time
OP - You're only going to know if it's JTAG'able if/when someone qualified physically takes a look at it with the necessary equipment.
Edit - Re: someone in Sydney who does them, best bet is to contact mobile repair places. I'd be surprised if you don't find one eventually (they don't tend to mention it in ads as they don't normally do many).
Click to expand...
Click to collapse
I have tried few shops in sydney markets and around, but I think they don't really understand what I need them to try/do. They simply keep the phone for one day and return it back to me saying "can't fix it, take it to samsung service". this happened three times.
So I thought, instead of running around without any success I would ask some one for help.
Today I will try Bankstown (heard there are some good repair shops there). Will let you know how it went
gastonw said:
I think he did that on purpose.
Click to expand...
Click to collapse
Apparently if you add PIT file to ODIN the "Re-partition" box is automatically checked.
By the time I realised, it was too late.
Monsters don't scare me, pit files do.
Just found this link thought I would share
w w w.jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list/comment-page-3/#comments
It is a list of riffbox/jtag repair centers across the world.
I found one from sydney too,,,,yippppiieiieee:victory:
will update soon
Good luck.
gastonw said:
Monsters don't scare me, pit files do.
Click to expand...
Click to collapse
+1 :laugh:
OP: Good luck man, I hope you got your phone working again soon.
w w w.jstechnofone.com.au
This guys says he doesn't have a connection for galasy s2, but can work on other devices. His shop is in Sydney near museum station.
next one a riff box in brisbane.
does any one know of a place in Sydney? Please for he love of god
Related
Maybe i´ll be the first one who admits. But i successfully managed to fully brick my sgs2 (shame on me).
Calling my self stupid after that. Yes i do.
I missed to check wether there where processes vom kiez running as i started to flash with odin (3 parts).
At some point during the PIT section odin had a freeze and was gone. I waited for hours with no positive result.
Usb jib showed to reaction.
The result is, the phone is pretty much dead. No reaction on usb connectino. wether usb or ac.
Pulling the battery and all kind of hints did not work....
Anyone else faced similar problems?
I just send the phone to the repaircenter of my mobile provider.
Hopefully the flash is damaged that badly that they wont find a thing
The first thing to prevent bricking your device is NEVER FLASH .PIT FILE NOR TICK REPARTITION ON ODIN, NEVER!!! Now that it's done, the only thing that can help you is a JTAG box. The guys on the repair centre will have this and hopefully will be able to unbrick your device. Good luck, and then when you get it back and alive, do not mess with the .PIT again
angelomaldito said:
The first thing to prevent bricking your device is NEVER FLASH .PIT FILE, NEVER!!! Now that it's done, the only thing that can help you is a JTAG box. The guys on the repair centre will have this and hopefully will be able to unbrick your device. Good luck, and then when you get it back and alive, do not mess with the .PIT again
Click to expand...
Click to collapse
The worse part is, i basicly was aware of that.....
I doubt that some "common support guys" will have a jtag box and will solder the contact to the circuit board.
Im aware of the fact that this would be the only way to get hands on the badly damaged flash
biba.butzemann said:
The worse part is, i basicly was aware of that.....
I doubt that some "common support guys" will have a jtag box and will solder the contact to the circuit board.
Im aware of the fact that this would be the only way to get hands on the badly damaged flash
Click to expand...
Click to collapse
I'm sure they will have the equipment. This is the basic tool for their work. If they don't, take a look here:
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
Some of those businesses are located in Germany. You can use the Deutsche Post it they are not near you.
(I did the same thing . Tried to flash with ODin but crashed and phone didnt respond to anything (only get warmed when i was charging it).
Send it to Samsung Service Center, told it happend throught Kiez (ye Kiez is such a unstable application and they know it ) they told me they change the motherboard of phone (but i think they just Jtag it). Of course warranty was used since i never rooted it and used official samsung firmware
@immunity : lucky enough i doubt that some common support guys can operate with a jtag. Dont you think they have to solder the contacts to the circuit board?
They told me they couldn't fix it and they had to send it to the central samsung service company (in Athens) so they might Jtag there, well both ways(Jtag or replacement) they had to remove the circuit board off the phone.
thats why i think, that my chances to get away with a blue eye are pretty good.
even though its 100% my own stupidity or fault. however you like to call it ;-)
Also Biba that hard brick = totally eraise of the data in ur circuit phone. so they find an empty storage memory. Althought as I told I have never rooted my phone , but even if you have rooted yours they cant find it.
Its like PC i believe repartition = format and install new firmware. and for Jtag as i saw from Youtubevideo. they cant see what it's inside (if partly of flashed firmware was saved on ur phone). Say " KIEZ DID IT ! :O "
I dont think there is a way to proof it was your fault xD
So the phone that ic completly bricked can be fixed with JTAG and my IMAI can not be put back to the phone that is working? Hmmm maybe i should brick it?
current status
i just talked to the repair guys. it seems that they repaired the phone, updated (completly new flash) the phone and exchanged some power circuit parts.
got word, that im going to get it back tomorrow or latest at monday.
damn i am a lucky son of a gun
Hey, I've got the same problem. I will try it out too... Please god, let "KIEZ DID IT! :O" work... This device is my life!
Thanks guys. Will keep you posted!
i'll keep my fingers crossed for you buddy.
Sent from my GT-I9100 using XDA App
Hey,
I've recently bought Galaxy S2.
It had problems with Android 2.3.3 and batter drain so I decided to upgrade to 2.3.4. I followed the instructions and I had to re-partition. Rebooted my phone into download mode, set re-partition option, PDA and clicked start (as said in the guide). It started doing stuff but after ~40-50 minutes there was no progress - it was stuck at "SET PARTITION". After an hour and 20 minutes still nothing and the phone started heating. So I unplugged the USB and removed the battery. Left it to heat down and tried to start recovery/download mode. It couldn't even start. As if it's really dead
How could you know for sure if a phone is bricked? What should I do know?
Is there anything I can try to see if I can bring it back to life or I should go to my provider and ask him to fix it?
I would be really grateful for any suggestions
Thanks in advance,
tftd
You have a bricked phone, you will need to buy another one.
I don't know which instructions you have been following, but it is not the ones here.
Over here, we tell people not to click 2 things. CLEAR EFS, and REPARTITION.
Clear EFS, kills the IMEI, and REPARTITION kills the phone.
Since the bootloader sits in the partition, you don't have bootloader, so no download mode either.
Yup, as the poster before me mentioned; your phone is totally hardbricked. Only way to fix it is through a jtag (requires some advanced hardware) or to send it to samsung on warrantee. Thats why they say not to play with pit files/partitions in the guides.
There is someone on youtube that can fix your device since he has the necessary tools, go to youtube and search for sgs2 jtag, you should find his video where he demonstrates the process, or you can do what the other posters said.
I'm on my phone using the xda application so I can't post the link for you.
Sent from my GT-I9100
Well from what i have read, bricking is really hard even if u check repartition.
Anyway iam a noob,but just search youtube and forums iam sure u will find something.
LiFE1688 said:
You have a bricked phone, you will need to buy another one.
I don't know which instructions you have been following, but it is not the ones here.
Over here, we tell people not to click 2 things. CLEAR EFS, and REPARTITION.
Clear EFS, kills the IMEI, and REPARTITION kills the phone.
Since the bootloader sits in the partition, you don't have bootloader, so no download mode either.
Click to expand...
Click to collapse
Now that's something I shall remember for the rest of my Android Phone life.
I sent my phone to customer service and hope they can fix it.
@achillies400 that dude is trained in small electronics (youtube/com /watch?v=zN7le4GmxZs) I saw what he does but I'm from Bulgaria and I'm not quite sure if the phone would get to USA and back to Bulgaria in one piece ...
For all the people coming after me:
DUDES! DON'T EVER RE-PARTITION! NEVER EVER!!!!!!
Thank you all for giving suggestions and helping me! Pretty much appreciated!
tftd said:
Hey,
I've recently bought Galaxy S2.
It had problems with Android 2.3.3 and batter drain so I decided to upgrade to 2.3.4. I followed the instructions and I had to re-partition. Rebooted my phone into download mode, set re-partition option, PDA and clicked start (as said in the guide). It started doing stuff but after ~40-50 minutes there was no progress - it was stuck at "SET PARTITION". After an hour and 20 minutes still nothing and the phone started heating. So I unplugged the USB and removed the battery. Left it to heat down and tried to start recovery/download mode. It couldn't even start. As if it's really dead
How could you know for sure if a phone is bricked? What should I do know?
Is there anything I can try to see if I can bring it back to life or I should go to my provider and ask him to fix it?
I would be really grateful for any suggestions
Thanks in advance,
tftd
Click to expand...
Click to collapse
MobileTechVideos have a jtag maybe they can repair.
Otherwise sent your device to an Samsung ServiceCenter!
looks like your simplest solution is the Jtag.
Is the samsung service centre offering a free repair? or are there any costs involved?
netchip said:
MobileTechVideos have a jtag maybe they can repair.
Otherwise sent your device to an Samsung ServiceCenter!
Click to expand...
Click to collapse
Yeah.. Still that's not an option for the moment - I live in Bulgaria .. :/
dullah said:
looks like your simplest solution is the Jtag.
Is the samsung service centre offering a free repair? or are there any costs involved?
Click to expand...
Click to collapse
Weelll... I hope it's free... though I'm prepared for a bill..
I didn't tell them I was flashing the rom... I told them it was heating up and suddenly it stopped working. Hope that's convenient enough
Check this link out.Its a list of places where you can get your phone jtaged incase it happens again.Near the bottom there is a contact for your country.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
okay, I hope it all works out
my phone has a busted up screen guys, claiming on house insurance, if i was to Clear EFS, kills the IMEI, and REPARTITION kills the phone. that would make it unbootable right??
I wouldnt give up jet
I ended up in quite a simular situation, i failed during flashing another pir, witch resulted in a non bootable phone with none ability to charge the battery. I tried to charge the battery elsewhere and was actually able to detect the phone in odin(none visual respons on the phone but stil). there should be a hope of reflashing it from here. could anyone explain why the screen goes blank even if its in downloadmode? is it related to imei/rom?
I would try this before sending in the phone. I talked to some guys in a norwegian servicecetre. If they are not able to connect it via usb to a pc and flash it they probably just change the motherboard!(EXPENCIVE) JTAG didnt seem to be the sollution of choice. changing the motherboard was rarely the sollution,but apperantly one customrom ****ed up both bootloaders(rom and imei) witch made them helpless reflashing it.
I bricked my phone because repartition was checked
I bricked my phone because I checked repartition. DO NOT CHECK BOX NEVER EVER EVER.
I sent back to t mobile and just said it would not turn on or charge and they repaired it free.
Since I have had my phone repaired I have flashed lots of custom roms with no major problems. Difference I have never once since clicked repartition and I made a backup of my EFS folder using Galaxy s unlock from android market also unlocked my s2 no probs
If you can detect it in Odin. Usually it is always able to be fixed.
But you may have to use someone else's full backup dump. But they may not want to give you their efs information of their phone.
Look online for galaxy s3 boot-loader etc.
This is for future people that need help
Hi
I installed the MIUI rom on my S2,and to cut a long story short i decided to change to another rom, due to the camcorder not working and the phone getting very hot.
I thought i would follow this guide theandroidsoul.com/how-to-install-android-2-3-2-on-samsung-galaxy-s-leaked-rom
I thought it looked nice an easy.
I followed the guide to the letter,and now my phone is dead.
It doesn't matter what button combo i try the phone wont switch on at all it is completely dead,the 3 button press,vol. down + Home + Power.
Volume UP or Down + power,the power button by itself,nothing will bring it back to life.
The battery at the time had 98% charge in it when it died.
The phone wont even show on the pc,nor will it charge through the pc or wall charger.
Is there anything i can do? Or is the phone dead?
I eagerly await your replies.
George
Brigton boy said:
Hi
I installed the MIUI rom on my S2,and to cut a long story short i decided to change to another rom, due to the camcorder not working and the phone getting very hot.
I thought i would follow this guide theandroidsoul.com/how-to-install-android-2-3-2-on-samsung-galaxy-s-leaked-rom
I thought it looked nice an easy.
I followed the guide to the letter,and now my phone is dead.
It doesn't matter what button combo i try the phone wont switch on at all it is completely dead,the 3 button press,vol. down + Home + Power.
Volume UP or Down + power,the power button by itself,nothing will bring it back to life.
The battery at the time had 98% charge in it when it died.
The phone wont even show on the pc,nor will it charge through the pc or wall charger.
Is there anything i can do? Or is the phone dead?
I eagerly await your replies.
George
Click to expand...
Click to collapse
You may need a jig to kick it into download mode.
Sent from my SPH-D710 using Tapatalk
Will that actually work mate?
George
This is because you have installed a Galaxy S ROM on a Galaxy SII. How you did not realize this is beyond me. Anyway, the only thing you can do is to order a USB Jig and see if that will put it into download mode. Otherwise, your phone is dead.
EDIT: To answer your question "Will that actually work", I don't think we can say for sure. I give it a 40% chance of working.
pemmarajut said:
This is because you have installed a Galaxy S ROM on a Galaxy SII. How you did not realize this is beyond me. Anyway, the only thing you can do is to order a USB Jig and see if that will put it into download mode. Otherwise, your phone is dead.
EDIT: To answer your question "Will that actually work", I don't think we can say for sure. I give it a 40% chance of working.
Click to expand...
Click to collapse
@pemmarajut
I never even noticed that mate until you pointed it out.....oh dearI guess that's what happens when your old
If a jig won't work will a samsung service centre get it working?
George
Well samsung service center will get it working since they have all the necessary tools to jtag it. You could make one too if you are well versed with hardware, just search it up. Anyways samsung service center might find out about the custom roms on your device so you will have to pay to get it repaired.
Yeah i know mate, I'm not bothered about paying for service center repair.
Anyone know how much Samsung take for JTagging a phone?(Is that the correct term?)
I will try the USB jig method first,I'll order one from the bay.
Many thanks for your help guys.
George
Right guys i had a look on ebay for the USB jig,and one guy says this in the item description:
"If your phone screen is always black, that is it does not
display the white Galaxy S/Samsung/AT&T logo
when you switch it on, then sorry, this jig will not help you."
Does that mean the jig wont work for my problem?
George
You shouldn't be installing a Galaxy S 1 rom on your SGS2..
doubt the "rom" flash killed it , what killed it probably was flashing the i9000 pit file.. meaning the jig wont help u at all, you need a jtag now.. build your own (hard) or Samsung service centre.
Yeah i know that now mate....It's an expensive painful lesson.It wont happen again.
George
Any guides on how to jtag bud,is it easy
Worst case scenario is the service center...Do you know how much samsung charge for this,is it very expensive?
Much obliged.
George
unleashed12 said:
doubt the "rom" flash killed it , what killed it probably was flashing the i9000 pit file.. meaning the jig wont help u at all, you need a jtag now.. build your own (hard) or Samsung service centre.
Click to expand...
Click to collapse
Brigton boy said:
Any guides on how to jtag bud,is it easy
Worst case scenario is the service center...Do you know how much samsung charge for this,is it very expensive?
Much obliged.
George
Click to expand...
Click to collapse
uhm i have no idea, ive only ever seen videos of the jtag, have no idea how you would even begin to build one... its like this http://www.youtube.com/watch?v=zN7le4GmxZs
Honestly!! id call samsung and pretend that i was updating my fw through kies and that happened, if you actually admit you were messing around in odin they will likely void your warranty and charge you.. Before anything else, call samsung first id say. much easier method than the jtag stuff.
I'm not the original owner of the phone mate,so a claim on warranty is out the window.
I don't mind paying for the service,after seeing how hard the Jtag thing is
I actually found that video that you linked too,after watching it i would say it's not a DIY job,not for me anyway.
The company in the video offers a JTag service for 75 bucks,just under £50,have you or anyone else heard of them before,would anyone recommend them,are they reliable,i would be grateful if anyone could advise me on using this service.
Cheers
George
Brigton boy said:
I'm not the original owner of the phone mate,so a claim on warranty is out the window.
I don't mind paying for the service,after seeing how hard the Jtag thing is
I actually found that video that you linked too,after watching it i would say it's not a DIY job,not for me anyway.
The company in the video offers a JTag service for 75 bucks,just under £50,have you or anyone else heard of them before,would anyone recommend them,are they reliable,i would be grateful if anyone could advise me on using this service.
Cheers
George
Click to expand...
Click to collapse
hmm, nah ive never really heard of them, id say just try to google the company and see if they are any good... the comments on the video seem pretty happy..\ then again, comments are just comments. Wonder how much Samsung would charge for the repair (seeing as you said you cant claim warranty, maybe they can repair for you) as it would be better than trusting some random third party.
unleashed12 said:
hmm, nah ive never really heard of them, id say just try to google the company and see if they are any good... the comments on the video seem pretty happy..\ then again, comments are just comments. Wonder how much Samsung would charge for the repair (seeing as you said you cant claim warranty, maybe they can repair for you) as it would be better than trusting some random third party.
Click to expand...
Click to collapse
Yes mate i know what you mean about third party repairers,I've had good experiences with most of them luckily.
I'm a bit dubious of sending the phone to the US (I'm in the UK) it's a long way.
I tried phoning the 2 service centers near me,but both are closedI'll contact them tomorrow,hopefully it wont be too expensive.
Much obliged for everyones help,i appreciate it guys.
Cheers.
George
hi there i had the same problem i flashed i9100 with i9000 pit and i got hard brick like you. I call to the service center and it would come about 100€. Then i found for mobiletechguy.com i send them the phone about ten days ago and in about 2 days ago i got their email that is completed and that they send the phone back to me, will see in about 2 or 3 days when i got it back.
Zgane said:
hi there i had the same problem i flashed i9100 with i9000 pit and i got hard brick like you. I call to the service center and it would come about 100€. Then i found for mobiletechguy.com i send them the phone about ten days ago and in about 2 days ago i got their email that is completed and that they send the phone back to me, will see in about 2 or 3 days when i got it back.
Click to expand...
Click to collapse
That's good to hear mate that the problem is fixable.
I hope you get your phone real soon.
George
Try another battery ? Sorry i think you need to call the service
Sent from my GT-I9100 using XDA App
Dude check this link out.Its a JTag service link and right down the bottom(almost) is a contact for United Kingdom.I got a i9000 done here in Spain for 35 euros.Worth a look.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
Hey guys,
The problem started last night, i had no sound coming from my speaker. After some checking i found that for some reason the phone was thinking that my headphones are always connected, even if they were in the other room. I tried reflashing it, and i couldn't boot up anymore. Tried flashing new kernel, nothing. Tried flashing stock firmware, nothing. The phone won't accept any firmwares. So i tried to REPARTITION with odin. And i think i got the wrong tutorial
My phone is a gt-i9100, and i repartition it with omap4_all_20110627_emmc.pit
In odin was like this:
pit file selected
auto reboot selected
re-partition selected
f.reset time selected
And start.....all done, green light but the phone won't power on, won't enter recovery/download.
Now what?
Posting questions in the general forum = bad
Flashing an I9100G .pit on an I9100 = worse
JTAG.
JTAG won't help you, because it is not bootloader corruption. Motherboard replacement will fix it.
Sent from my GT-I9100 using xda premium
another one bites the dust
try JTAG anyway,cant hurt.
Oh your wording... too funny...
Sent from my GT-I9100 using xda app-developers app
firmware?
xSurgery said:
Hey guys,
The problem started last night, i had no sound coming from my speaker. After some checking i found that for some reason the phone was thinking that my headphones are always connected, even if they were in the other room. I tried reflashing it, and i couldn't boot up anymore. Tried flashing new kernel, nothing. Tried flashing stock firmware, nothing. The phone won't accept any firmwares. So i tried to REPARTITION with odin. And i think i got the wrong tutorial
My phone is a gt-i9100, and i repartition it with omap4_all_20110627_emmc.pit
In odin was like this:
pit file selected
auto reboot selected
re-partition selected
f.reset time selected
And start.....all done, green light but the phone won't power on, won't enter recovery/download.
Now what?
Click to expand...
Click to collapse
Did you put a firmware in the PDA section? if not go here to get one - sammobile.com/firmware
last_pawn said:
Did you put a firmware in the PDA section? if not go here to get one - sammobile.com/firmware
Click to expand...
Click to collapse
Dude, this thread was last posted in back in October before your post.
That, and it was already established he used a pit file not meant for his device, which is what went wrong.
try force download mode, you need some one to help u
pull out the battery press the home+power+vol down
let the other person put the battery back
eraser0 said:
try force download mode, you need some one to help u
pull out the battery press the home+power+vol down
let the other person put the battery back
Click to expand...
Click to collapse
I give up.
ctomgee said:
I give up.
Click to expand...
Click to collapse
lol
Sent from the little guy
Bunch of boneheads (last_pawn & eraser0 I'm glaring @ you in particular).
ctomgee said:
I give up.
Click to expand...
Click to collapse
They probably are trying to help an iS**t guy now LMFAO
Envoyé depuis mon GT-I9100 avec Tapatalk
Hi all,
so is there any progress on this issue?
I did not want to open a new thread because this thread explains exactly my situation and I am posting here because this thread did not help me.
I have since yesterday the same problem. I unfortunately also repartitioned my Samsung Galaxy S II i9100 with "omap4_all_20110627_emmc.pit" which actually is the wrong one.
(I know it is "stupid" but please do not explicitly state it in your replies, I am already aware of it.)
Is there a possibility fix this issue by repartitioning with the correct one?
Current Situation:
- My phone is not booting up
- not going into the download mode
- not going into the recovery mode
- if I plug into the PC with a USB cord, PC and Odin is not recognizing it
- if I try to charge it, I see no icon at all
- in short: it is dead
Solution I have found so far:
1- replace the motherboard
2- buy a usb jig
3- throw it away
So my question is about second (possible?) solution: if I buy a usb jib will I be able to use Odin to repartition with the right pit file? Did someone have experience or try this method?
I thank you all in advance for your replies.
Ibo
The jig more than likely won't work, but you may as well try one given they cost 1/3rd of sod all.
Option 1 tends to be the only way to fix the phone. And obviously option 3 is always possible (People who use the 'I'm going to smash it/throw it away/etc' line here tend to get ignored for the childish fools they are. We don't care what you do with your phone).
Edit -Yes, using a wrong PIT is the height of stupidity. Despite thousands upon thousands of warnings here/elsewhere not to touch PIT's unless you have a very specific reason for using one (0.000000001% of cases, you were not one of those people), people still do it.
MistahBungle said:
The jig more than likely won't work, but you may as well try one given they cost 1/3rd of sod all.
Option 1 tends to be the only way to fix the phone. And obviously option 3 is always possible (People who use the 'I'm going to smash it/throw it away/etc' line here tend to get ignored for the childish fools they are. We don't care what you do with your phone).
Edit -Yes, using a wrong PIT is the height of stupidity. Despite thousands upon thousands of warnings here/elsewhere not to touch PIT's unless you have a very specific reason for using one (0.000000001% of cases, you were not one of those people), people still do it.
Click to expand...
Click to collapse
Thanks for your answer. I thank you just for the part where you have written "Option 1 tends to be the only way to fix the phone.". This was enough for me to hear considering your experience in this forum. For the rest:
1: What would you do if your phone is not booting up and shows the Samsung logo even you wait 1 hour? Assuming that you already used options in recovery mode and also used Odin to update PDA several times?
2: Then you found a tutorial which says this is for Samsung Galaxy S II no further specifics given other than I9100.
3: Different people have different sense of humor so I do not blame them when I see in many forums where they write throw it away. I think it does not make sense to overreact to such suggestions. For example I just laughed when I read something like this.
Best,
Ibo
1) If I'd tried everything (and I mean everything, over and over and over), I'd assume the NAND is stuffed, bite the bullet & have the motherboard replaced one way or another. I'd either find a 2nd hand one & have a local mobile repair shop/not an authorised Samsung repairer replace it for me, or if I couldn't find one I'd pay an authorised Samsung repair to put a new one in. Or I'd get a new phone.
2) Before I got my phone I did a lot of research/reading/learning. For over a month. When I got my phone, I did even more research/reading/learning. I didn't jump blindly in messing with my phone without knowing what I was doing. If I saw some dodgy tutorial that told me to use a PIT when everything else I'd read said not to touch except for a very specific situation, I wouldn't touch a PIT unless I was in that very specific situation. Knowledge is power & stops you doing silly/desperate things. It's like putting your hand on the stove when you've already learned you'll get burnt if you do.
3) I'm glad you found what I said amusing. That probably speaks to why you broke your phone in the first place. I was deadly serious. From where I sit, a $700+ piece of electronics is too important to me not to take its continued proper functioning very very seriously. I realise some people get a new phone every 6 mths or whatever or don't care. To me, that's wasteful.
Edit - If you're able to have it assessed cheaply/for free, it might (again, less likely than more) even be JTAG'able, but I wouldn't be spending a lot of money up front having it looked at given it's likely not to be.
MistahBungle said:
1) If I'd tried everything (and I mean everything, over and over and over), I'd assume the NAND is stuffed, bite the bullet & have the motherboard replaced one way or another. I'd either find a 2nd hand one & have a local mobile repair shop/not an authorised Samsung repairer replace it for me, or if I couldn't find one I'd pay an authorised Samsung repair to put a new one in. Or I'd get a new phone.
2) Before I got my phone I did a lot of research/reading/learning. For over a month. When I got my phone, I did even more research/reading/learning. I didn't jump blindly in messing with my phone without knowing what I was doing. If I saw some dodgy tutorial that told me to use a PIT when everything else I'd read said not to touch except for a very specific situation, I wouldn't touch a PIT unless I was in that very specific situation. Knowledge is power & stops you doing silly/desperate things. It's like putting your hand on the stove when you've already learned you'll get burnt if you do.
3) I'm glad you found what I said amusing. That probably speaks to why you broke your phone in the first place. I was deadly serious. From where I sit, a $700+ piece of electronics is too important to me not to take its continued proper functioning very very seriously. I realise some people get a new phone every 6 mths or whatever or don't care. To me, that's wasteful.
Click to expand...
Click to collapse
1. It is nice to hear that in any case the motherboard should have been / be repaired. You are right that was an expensive try but even if didn't I had to let the motherboard repaired. It was written the same thing as you said: the motherboard should be repaired so why not try this option: yes awful but if you have no other option and you tried really everything, you just give it a try.
2. I have been using this Samsung Galaxy SII since a couple months after it is first launched (mid 2011) and did not have any problem so far, so I did not have any interest or reasons to learn about flashing or any advanced methods.
3. Sorry there is a misunderstanding there. I found amusing not you have written but when I saw on an android forum where they written whether let the motherboard repaired or throw away/sell parts and buy a new phone instead. This "piece of electronics" is too expensive not only for you, I think for many people including me. That is why I posted here before giving 125€ to an authorised Samsung repairer.
Best,
Ibo
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
MistahBungle said:
Edit - If you're able to have it assessed cheaply/for free, it might (again, less likely than more) even be JTAG'able, but I wouldn't be spending a lot of money up front having it looked at given it's likely not to be.
Click to expand...
Click to collapse
Thanks for the tip. :good: I am now searching for it.
After Flashing Latest CM10.1 to my S3 and using it for a while, I wanted to go back to stock. I flashed stock 4.1.2, rooted it and installed CWM successfully. After a while I noticed that CWM can not mount internal SD card, or recover a nandroid backup from it. I thought it is a partition issue, so i have decided to flash GT-I9300_mx_20120220.pit to my S3 with re-paration checked. ODIN started the process, Pass appeared with green background. Since then, the device wont start in any mode. I tried every key combination with no luck. Tried to connect the device to pc, same result; device is dead. Pulling battery also did not work.Anything I can do to turn on the device in to download mode at least? Please help me. I am from Lebanon; here all the phones are sold with no warranty, so returning it to Samsung wont solve the problem? any solution? Thank you.
This may help
http://forum.xda-developers.com/showthread.php?t=1916936
DSA said:
This may help
http://forum.xda-developers.com/showthread.php?t=1916936
Click to expand...
Click to collapse
This would have helped me in case i was able to boot my phone into download mode; which is not the case. The device does not start at all. Laying dead.
Thank you.
No power
No pit
No os
No Samsung service centre
It don't look good
DSA said:
No power
No pit
No os
No Samsung service centre
It don't look good
Click to expand...
Click to collapse
Not good at all
I'm should read about this before I make my statement but it's 4:46 in the morning and I can't get some sleep...that pit file flash....is it mandatory? To me it looks like your device murderer.
Sent from the little guy
gastonw said:
I'm should read about this before I make my statement but it's 4:46 in the morning and I can't get some sleep...that pit file flash....is it mandatory? To me it looks like your device murderer.
Sent from the little guy
Click to expand...
Click to collapse
no its not mandatory
no its not a 'device murderer'
his phone doesn't boot so he cant use that method anyway
Get some sleep dude
tryin' man, i'm tryin'
Thanks for the reply.
Sent from the little guy
Any possible solution? I really need my device back alive.
mhs888 said:
Any possible solution? I really need my device back alive.
Click to expand...
Click to collapse
Honestly?
Without the ability to send it back to Samsung, i think you may be screwed
However, there may be a person on here that has had the same issue and managed to fix it (but i doubt it) - be a bit more patient and see if anyone else comes into the thread :good:
DSA said:
Honestly?
Without the ability to send it back to Samsung, i think you may be screwed
However, there may be a person on here that has had the same issue and managed to fix it (but i doubt it) - be a bit more patient and see if anyone else comes into the thread :good:
Click to expand...
Click to collapse
Hope so; you gave me a small hope. where is that guy?
Contact samsung and claim wareanty because of Sleep of Death.
What you mean it's sold without warranty, that goes against consumers right.
(that's your line right there)
Sent from the little guy
gastonw said:
Contact samsung and claim wareanty because of Sleep of Death.
What you mean it's sold without warranty, that goes against consumers right.
(that's your line right there)
Sent from the little guy
Click to expand...
Click to collapse
90% of phones in Lebanon are sold through unauthorized sellers. If you want to buy it from Samsung agent here, you will end up paying $200 more. Bought my phone for $520, while it costs around $700 from authorized seller.
Is either that or a $200 + mobo replacement.
Sent from the little guy