S2 re-partition with odin FAILED, phone not powering up - Galaxy S II Q&A, Help & Troubleshooting

Hey guys,
The problem started last night, i had no sound coming from my speaker. After some checking i found that for some reason the phone was thinking that my headphones are always connected, even if they were in the other room. I tried reflashing it, and i couldn't boot up anymore. Tried flashing new kernel, nothing. Tried flashing stock firmware, nothing. The phone won't accept any firmwares. So i tried to REPARTITION with odin. And i think i got the wrong tutorial
My phone is a gt-i9100, and i repartition it with omap4_all_20110627_emmc.pit
In odin was like this:
pit file selected
auto reboot selected
re-partition selected
f.reset time selected
And start.....all done, green light but the phone won't power on, won't enter recovery/download.
Now what?

Posting questions in the general forum = bad
Flashing an I9100G .pit on an I9100 = worse
JTAG.

JTAG won't help you, because it is not bootloader corruption. Motherboard replacement will fix it.
Sent from my GT-I9100 using xda premium

another one bites the dust
try JTAG anyway,cant hurt.

Oh your wording... too funny...
Sent from my GT-I9100 using xda app-developers app

firmware?
xSurgery said:
Hey guys,
The problem started last night, i had no sound coming from my speaker. After some checking i found that for some reason the phone was thinking that my headphones are always connected, even if they were in the other room. I tried reflashing it, and i couldn't boot up anymore. Tried flashing new kernel, nothing. Tried flashing stock firmware, nothing. The phone won't accept any firmwares. So i tried to REPARTITION with odin. And i think i got the wrong tutorial
My phone is a gt-i9100, and i repartition it with omap4_all_20110627_emmc.pit
In odin was like this:
pit file selected
auto reboot selected
re-partition selected
f.reset time selected
And start.....all done, green light but the phone won't power on, won't enter recovery/download.
Now what?
Click to expand...
Click to collapse
Did you put a firmware in the PDA section? if not go here to get one - sammobile.com/firmware

last_pawn said:
Did you put a firmware in the PDA section? if not go here to get one - sammobile.com/firmware
Click to expand...
Click to collapse
Dude, this thread was last posted in back in October before your post.
That, and it was already established he used a pit file not meant for his device, which is what went wrong.

try force download mode, you need some one to help u
pull out the battery press the home+power+vol down
let the other person put the battery back

eraser0 said:
try force download mode, you need some one to help u
pull out the battery press the home+power+vol down
let the other person put the battery back
Click to expand...
Click to collapse
I give up.

ctomgee said:
I give up.
Click to expand...
Click to collapse
lol
Sent from the little guy

Bunch of boneheads (last_pawn & eraser0 I'm glaring @ you in particular).

ctomgee said:
I give up.
Click to expand...
Click to collapse
They probably are trying to help an iS**t guy now LMFAO
Envoyé depuis mon GT-I9100 avec Tapatalk

Hi all,
so is there any progress on this issue?
I did not want to open a new thread because this thread explains exactly my situation and I am posting here because this thread did not help me.
I have since yesterday the same problem. I unfortunately also repartitioned my Samsung Galaxy S II i9100 with "omap4_all_20110627_emmc.pit" which actually is the wrong one.
(I know it is "stupid" but please do not explicitly state it in your replies, I am already aware of it.)
Is there a possibility fix this issue by repartitioning with the correct one?
Current Situation:
- My phone is not booting up
- not going into the download mode
- not going into the recovery mode
- if I plug into the PC with a USB cord, PC and Odin is not recognizing it
- if I try to charge it, I see no icon at all
- in short: it is dead
Solution I have found so far:
1- replace the motherboard
2- buy a usb jig
3- throw it away
So my question is about second (possible?) solution: if I buy a usb jib will I be able to use Odin to repartition with the right pit file? Did someone have experience or try this method?
I thank you all in advance for your replies.
Ibo

The jig more than likely won't work, but you may as well try one given they cost 1/3rd of sod all.
Option 1 tends to be the only way to fix the phone. And obviously option 3 is always possible (People who use the 'I'm going to smash it/throw it away/etc' line here tend to get ignored for the childish fools they are. We don't care what you do with your phone).
Edit -Yes, using a wrong PIT is the height of stupidity. Despite thousands upon thousands of warnings here/elsewhere not to touch PIT's unless you have a very specific reason for using one (0.000000001% of cases, you were not one of those people), people still do it.

MistahBungle said:
The jig more than likely won't work, but you may as well try one given they cost 1/3rd of sod all.
Option 1 tends to be the only way to fix the phone. And obviously option 3 is always possible (People who use the 'I'm going to smash it/throw it away/etc' line here tend to get ignored for the childish fools they are. We don't care what you do with your phone).
Edit -Yes, using a wrong PIT is the height of stupidity. Despite thousands upon thousands of warnings here/elsewhere not to touch PIT's unless you have a very specific reason for using one (0.000000001% of cases, you were not one of those people), people still do it.
Click to expand...
Click to collapse
Thanks for your answer. I thank you just for the part where you have written "Option 1 tends to be the only way to fix the phone.". This was enough for me to hear considering your experience in this forum. For the rest:
1: What would you do if your phone is not booting up and shows the Samsung logo even you wait 1 hour? Assuming that you already used options in recovery mode and also used Odin to update PDA several times?
2: Then you found a tutorial which says this is for Samsung Galaxy S II no further specifics given other than I9100.
3: Different people have different sense of humor so I do not blame them when I see in many forums where they write throw it away. I think it does not make sense to overreact to such suggestions. For example I just laughed when I read something like this.
Best,
Ibo

1) If I'd tried everything (and I mean everything, over and over and over), I'd assume the NAND is stuffed, bite the bullet & have the motherboard replaced one way or another. I'd either find a 2nd hand one & have a local mobile repair shop/not an authorised Samsung repairer replace it for me, or if I couldn't find one I'd pay an authorised Samsung repair to put a new one in. Or I'd get a new phone.
2) Before I got my phone I did a lot of research/reading/learning. For over a month. When I got my phone, I did even more research/reading/learning. I didn't jump blindly in messing with my phone without knowing what I was doing. If I saw some dodgy tutorial that told me to use a PIT when everything else I'd read said not to touch except for a very specific situation, I wouldn't touch a PIT unless I was in that very specific situation. Knowledge is power & stops you doing silly/desperate things. It's like putting your hand on the stove when you've already learned you'll get burnt if you do.
3) I'm glad you found what I said amusing. That probably speaks to why you broke your phone in the first place. I was deadly serious. From where I sit, a $700+ piece of electronics is too important to me not to take its continued proper functioning very very seriously. I realise some people get a new phone every 6 mths or whatever or don't care. To me, that's wasteful.
Edit - If you're able to have it assessed cheaply/for free, it might (again, less likely than more) even be JTAG'able, but I wouldn't be spending a lot of money up front having it looked at given it's likely not to be.

MistahBungle said:
1) If I'd tried everything (and I mean everything, over and over and over), I'd assume the NAND is stuffed, bite the bullet & have the motherboard replaced one way or another. I'd either find a 2nd hand one & have a local mobile repair shop/not an authorised Samsung repairer replace it for me, or if I couldn't find one I'd pay an authorised Samsung repair to put a new one in. Or I'd get a new phone.
2) Before I got my phone I did a lot of research/reading/learning. For over a month. When I got my phone, I did even more research/reading/learning. I didn't jump blindly in messing with my phone without knowing what I was doing. If I saw some dodgy tutorial that told me to use a PIT when everything else I'd read said not to touch except for a very specific situation, I wouldn't touch a PIT unless I was in that very specific situation. Knowledge is power & stops you doing silly/desperate things. It's like putting your hand on the stove when you've already learned you'll get burnt if you do.
3) I'm glad you found what I said amusing. That probably speaks to why you broke your phone in the first place. I was deadly serious. From where I sit, a $700+ piece of electronics is too important to me not to take its continued proper functioning very very seriously. I realise some people get a new phone every 6 mths or whatever or don't care. To me, that's wasteful.
Click to expand...
Click to collapse
1. It is nice to hear that in any case the motherboard should have been / be repaired. You are right that was an expensive try but even if didn't I had to let the motherboard repaired. It was written the same thing as you said: the motherboard should be repaired so why not try this option: yes awful but if you have no other option and you tried really everything, you just give it a try.
2. I have been using this Samsung Galaxy SII since a couple months after it is first launched (mid 2011) and did not have any problem so far, so I did not have any interest or reasons to learn about flashing or any advanced methods.
3. Sorry there is a misunderstanding there. I found amusing not you have written but when I saw on an android forum where they written whether let the motherboard repaired or throw away/sell parts and buy a new phone instead. This "piece of electronics" is too expensive not only for you, I think for many people including me. That is why I posted here before giving 125€ to an authorised Samsung repairer.
Best,
Ibo
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
MistahBungle said:
Edit - If you're able to have it assessed cheaply/for free, it might (again, less likely than more) even be JTAG'able, but I wouldn't be spending a lot of money up front having it looked at given it's likely not to be.
Click to expand...
Click to collapse
Thanks for the tip. :good: I am now searching for it.

Related

[Q] Samsung Galaxy S2 bricked?

Hey,
I've recently bought Galaxy S2.
It had problems with Android 2.3.3 and batter drain so I decided to upgrade to 2.3.4. I followed the instructions and I had to re-partition. Rebooted my phone into download mode, set re-partition option, PDA and clicked start (as said in the guide). It started doing stuff but after ~40-50 minutes there was no progress - it was stuck at "SET PARTITION". After an hour and 20 minutes still nothing and the phone started heating. So I unplugged the USB and removed the battery. Left it to heat down and tried to start recovery/download mode. It couldn't even start. As if it's really dead
How could you know for sure if a phone is bricked? What should I do know?
Is there anything I can try to see if I can bring it back to life or I should go to my provider and ask him to fix it?
I would be really grateful for any suggestions
Thanks in advance,
tftd
You have a bricked phone, you will need to buy another one.
I don't know which instructions you have been following, but it is not the ones here.
Over here, we tell people not to click 2 things. CLEAR EFS, and REPARTITION.
Clear EFS, kills the IMEI, and REPARTITION kills the phone.
Since the bootloader sits in the partition, you don't have bootloader, so no download mode either.
Yup, as the poster before me mentioned; your phone is totally hardbricked. Only way to fix it is through a jtag (requires some advanced hardware) or to send it to samsung on warrantee. Thats why they say not to play with pit files/partitions in the guides.
There is someone on youtube that can fix your device since he has the necessary tools, go to youtube and search for sgs2 jtag, you should find his video where he demonstrates the process, or you can do what the other posters said.
I'm on my phone using the xda application so I can't post the link for you.
Sent from my GT-I9100
Well from what i have read, bricking is really hard even if u check repartition.
Anyway iam a noob,but just search youtube and forums iam sure u will find something.
LiFE1688 said:
You have a bricked phone, you will need to buy another one.
I don't know which instructions you have been following, but it is not the ones here.
Over here, we tell people not to click 2 things. CLEAR EFS, and REPARTITION.
Clear EFS, kills the IMEI, and REPARTITION kills the phone.
Since the bootloader sits in the partition, you don't have bootloader, so no download mode either.
Click to expand...
Click to collapse
Now that's something I shall remember for the rest of my Android Phone life.
I sent my phone to customer service and hope they can fix it.
@achillies400 that dude is trained in small electronics (youtube/com /watch?v=zN7le4GmxZs) I saw what he does but I'm from Bulgaria and I'm not quite sure if the phone would get to USA and back to Bulgaria in one piece ...
For all the people coming after me:
DUDES! DON'T EVER RE-PARTITION! NEVER EVER!!!!!!
Thank you all for giving suggestions and helping me! Pretty much appreciated!
tftd said:
Hey,
I've recently bought Galaxy S2.
It had problems with Android 2.3.3 and batter drain so I decided to upgrade to 2.3.4. I followed the instructions and I had to re-partition. Rebooted my phone into download mode, set re-partition option, PDA and clicked start (as said in the guide). It started doing stuff but after ~40-50 minutes there was no progress - it was stuck at "SET PARTITION". After an hour and 20 minutes still nothing and the phone started heating. So I unplugged the USB and removed the battery. Left it to heat down and tried to start recovery/download mode. It couldn't even start. As if it's really dead
How could you know for sure if a phone is bricked? What should I do know?
Is there anything I can try to see if I can bring it back to life or I should go to my provider and ask him to fix it?
I would be really grateful for any suggestions
Thanks in advance,
tftd
Click to expand...
Click to collapse
MobileTechVideos have a jtag maybe they can repair.
Otherwise sent your device to an Samsung ServiceCenter!
looks like your simplest solution is the Jtag.
Is the samsung service centre offering a free repair? or are there any costs involved?
netchip said:
MobileTechVideos have a jtag maybe they can repair.
Otherwise sent your device to an Samsung ServiceCenter!
Click to expand...
Click to collapse
Yeah.. Still that's not an option for the moment - I live in Bulgaria .. :/
dullah said:
looks like your simplest solution is the Jtag.
Is the samsung service centre offering a free repair? or are there any costs involved?
Click to expand...
Click to collapse
Weelll... I hope it's free... though I'm prepared for a bill..
I didn't tell them I was flashing the rom... I told them it was heating up and suddenly it stopped working. Hope that's convenient enough
Check this link out.Its a list of places where you can get your phone jtaged incase it happens again.Near the bottom there is a contact for your country.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
okay, I hope it all works out
my phone has a busted up screen guys, claiming on house insurance, if i was to Clear EFS, kills the IMEI, and REPARTITION kills the phone. that would make it unbootable right??
I wouldnt give up jet
I ended up in quite a simular situation, i failed during flashing another pir, witch resulted in a non bootable phone with none ability to charge the battery. I tried to charge the battery elsewhere and was actually able to detect the phone in odin(none visual respons on the phone but stil). there should be a hope of reflashing it from here. could anyone explain why the screen goes blank even if its in downloadmode? is it related to imei/rom?
I would try this before sending in the phone. I talked to some guys in a norwegian servicecetre. If they are not able to connect it via usb to a pc and flash it they probably just change the motherboard!(EXPENCIVE) JTAG didnt seem to be the sollution of choice. changing the motherboard was rarely the sollution,but apperantly one customrom ****ed up both bootloaders(rom and imei) witch made them helpless reflashing it.
I bricked my phone because repartition was checked
I bricked my phone because I checked repartition. DO NOT CHECK BOX NEVER EVER EVER.
I sent back to t mobile and just said it would not turn on or charge and they repaired it free.
Since I have had my phone repaired I have flashed lots of custom roms with no major problems. Difference I have never once since clicked repartition and I made a backup of my EFS folder using Galaxy s unlock from android market also unlocked my s2 no probs
If you can detect it in Odin. Usually it is always able to be fixed.
But you may have to use someone else's full backup dump. But they may not want to give you their efs information of their phone.
Look online for galaxy s3 boot-loader etc.
This is for future people that need help

[Q] Hard bricked?

Hi,
I read and followed lots of excellent threads on here and successfully rooted my S2. I then flashed it with the Revolution ROM which worked fine, later tried the VK + Siyah which also ran fine.
Today I decided to try WajkIUI but after flashing and rebooting, the phone reset, the button lights came on and then it hung. Now I can't get a thing out of it, no booting, no recovery mode and no sign of it in ODIN.
It sounds completely hard-bricked but I don't really understand how it can be.
Any ideas?
Have tried soft and hard resetting but nothing.
Cheers
Without recovery mode your last best (remote) chance before you send it to Samsung would be a jig.
That's what I was thinking but why would it hard brick if the flash had worked?
And if I send if back to Samsung the warranty will be void anyway won't it?
Unfortunately that one's like asking how long a piece of string is (in other words, who knows ?). If it's a case of the NAND being stuffed as a result of the flash, a JTAG repair may fix it, but you won't know that until/unless you send it to a JTAG repairer.
It may be a hardware issue, cpu might have carked it or something.
Yeah, you've pretty much voided the warranty by putting non-stock firmware on it, but at the end of the day if Samsung can't tell it's been messed with you might get away with a warranty repair/replacement.
You'll only know that if you send it in to them to be looked at. So I guess you've got two choices to consider (not including the remote chance of the jig getting you into download mode).
I guess you could try another battery. Always the possibility it might have died.
Crap. Well, I'll give a jig a go and if that doesn't work then send it back and see what happens.
@ op
did you tried the key press combination to get into download mode? the things you have done has a very less possibility of hard brick.
That's what I thought, but no combination seems to work.
Was the battery full when you flashed?
Sent from my GT-I9100 using Tapatalk
Think it was about 96%.
You never know, it might just be a completely knackered battery. If you're planning on getting it fixed come what may, spending 20 bucks or whatever they cost in your country on another battery won't be the waste of money you might initially think.
If it doesn't fix this problem, at least you'll have a 2nd battery when you do get it fixed. I know I've found having a 2nd battery a godsend since I got mine a month ago, has come in really handy on trips where I've been away for more than a day and has meant I haven't had to worry bout bringing a charger along.
Could a battery just die like that? Seems a bit of coincidence.
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
mraquinn said:
Could a battery just die like that? Seems a bit of coincidence.
Click to expand...
Click to collapse
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
MistahBungle said:
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
Click to expand...
Click to collapse
On that note....if I wanted to upgrade to ICS, how would that be done without rooting - ie. would the counter look the same? (Long shot)
Yeah if you're going to get it fixed, chances are you'll end up flashing/rooting it again, so the jig will come in handy.
I guess that's something you'll need to decide when you get it back/get a new one. What happened to you isn't the norm tho. The large majority of flashes go smoothly for most people. But the reality is, every time you do it, you do run that small risk of it barfing for any number of a gazillion reasons (which are normally impossible to discover once it's happened). That's the risk people like us who frequent sites like this take.
Yeah if they/Samsung can't tell what happened to it, you'll possibly get away with it. And the fact you rooted it isn't information you have to volunteer to them by any means As to exactly what you should tell them, that's up to you.
Edit to add - Let us know how you get on once you have it sorted. Always useful to have people's experiences on here to give other people it happens to some kind of idea of how it might go down.
mraquinn said:
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
Click to expand...
Click to collapse
Well, according to the boffins online I have to go into a store to see if they can repair it. Hopefully they won't be able to check whether it's been rooted or not instore. In fact, if they can't power it on, I don't see how they could.
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
mraquinn said:
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
Click to expand...
Click to collapse
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Is that a bit of a flaw, for circumstances just like this?
And, does this mean that the USB jig has no chance of working - or is that the exact reason it might work?
JJEgan said:
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Click to expand...
Click to collapse
i thing jig can solve the problem

[Q] Need help, hard brick

Hi folks. As you can see this is my first post, so please forgive me for any mistakes.
Now to my problem
I have a galaxy s ii GT i9100 (bought in august 2011)
I was on x(jellybean) rom when my phone stopped recognising internal sd storage, this annoyed the hell out of me.
so I searched online and found that the best solution was to flash the phone with samsung official android 2.3 gingerbread.
So I tried to flash the firmware and pit file acquired from sammobile ( please refer to attachment) via ODIN.
I failed to notice that the Re-Partition box was checked and started the flashing process, which stopped in the middle and the phone turned off.
Thats the last I have seen my phone with signs of any form of life.
Now my phone doesn't
turn on(no recovery/download)
when i put it on charge the area near the camera heats up but no sign of life
I have tried every thing possible to bring it back to life(download mode), but to no luck
So my question is, will JTAG repair work for my device? is there any other way I can bring my phone back from the dead?
Finally: If any of you know a technician in Sydney who can do such repairs, please do provide details
Thanks for your help and support
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
911-Future_Maker said:
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
Click to expand...
Click to collapse
I think he did that on purpose.
You're a very brave man putting that level of certainty on it being JTAG'able. I'd happily take the other side of that wager a couple of times because I know I'd collect more often than 0.1% of the time
OP - You're only going to know if it's JTAG'able if/when someone qualified physically takes a look at it with the necessary equipment.
Edit - Re: someone in Sydney who does them, best bet is to contact mobile repair places. I'd be surprised if you don't find one eventually (they don't tend to mention it in ads as they don't normally do many).
911-Future_Maker said:
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
Click to expand...
Click to collapse
911-Future_Maker said:
I'm 99.9% sure that JTAG will fix it, that's the most common issue - wrong pressed "Repartition" button in Odin.
But, you must try a USB JIG before that. Search for it.
Click to expand...
Click to collapse
Usb Jig didn't work for me, so my only option is JTAGing
MistahBungle said:
You're a very brave man putting that level of certainty on it being JTAG'able. I'd happily take the other side of that wager a couple of times because I know I'd collect more often than 0.1% of the time
OP - You're only going to know if it's JTAG'able if/when someone qualified physically takes a look at it with the necessary equipment.
Edit - Re: someone in Sydney who does them, best bet is to contact mobile repair places. I'd be surprised if you don't find one eventually (they don't tend to mention it in ads as they don't normally do many).
Click to expand...
Click to collapse
I have tried few shops in sydney markets and around, but I think they don't really understand what I need them to try/do. They simply keep the phone for one day and return it back to me saying "can't fix it, take it to samsung service". this happened three times.
So I thought, instead of running around without any success I would ask some one for help.
Today I will try Bankstown (heard there are some good repair shops there). Will let you know how it went
gastonw said:
I think he did that on purpose.
Click to expand...
Click to collapse
Apparently if you add PIT file to ODIN the "Re-partition" box is automatically checked.
By the time I realised, it was too late.
Monsters don't scare me, pit files do.
Just found this link thought I would share
w w w.jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list/comment-page-3/#comments
It is a list of riffbox/jtag repair centers across the world.
I found one from sydney too,,,,yippppiieiieee:victory:
will update soon
Good luck.
gastonw said:
Monsters don't scare me, pit files do.
Click to expand...
Click to collapse
+1 :laugh:
OP: Good luck man, I hope you got your phone working again soon.
w w w.jstechnofone.com.au
This guys says he doesn't have a connection for galasy s2, but can work on other devices. His shop is in Sydney near museum station.
next one a riff box in brisbane.
does any one know of a place in Sydney? Please for he love of god

[Q] white screen at bootup

iwhenever i bootup my phone turns into colors then turns white and my computer wont recognize it. i am running blackstar x and am rooted. if anyone can help me i'd appreciate it. oh and i cant go into recovery but can access odin.
So just flash a rom with odin.
rangercaptain said:
So just flash a rom with odin.
Click to expand...
Click to collapse
Agreed....
and once the new image is pushed over to the device, you will need to boot once, then reboot into recovery and wipe all caches and data.
Otherwise, you will have dirty flashed, and you will have stability issues....g
I've never used odin I am reading up on it now as far as I can tell you can't flash zip files so do you know any good roms I can use for my galaxy note?
izdabombest1 said:
I've never used odin I am reading up on it now as far as I can tell you can't flash zip files so do you know any good roms I can use for my galaxy note?
Click to expand...
Click to collapse
Odin is used to push stock image files...
And they can be found in the super thread, at the top of the general section.
concentrate on getting a stock build running properly first, then we can worry about custom builds later.
Edit:
This is the thread, and inside will be the file you need:
Read carefully, and take your time on this...g
http://forum.xda-developers.com/showthread.php?t=1506330
gregsarg said:
Odin is used to push stock image files...
And they can be found in the super thread, at the top of the general section.
concentrate on getting a stock build running properly first, then we can worry about custom builds later.
Edit:
This is the thread, and inside will be the file you need:
Read carefully, and take your time on this...g
http://forum.xda-developers.com/showthread.php?t=1506330
Click to expand...
Click to collapse
well I ran loading and it came up with firmware upgrade in encounter in issue please select recovery mode in kies and try again so I will do the next I guess. but I can never get kies and the phone to connect.
can't get kies and phone to connect and i followed all the steps. what gives?
update: after 16 hours with kies decided to give odin one more shot on a different computer. she's back up and running! now to decide with what rom to go with. LOL. thanx guys for the help.
Kies is a fickle pig. Sometimes you're using the wrong cable or usb port.
rangercaptain said:
Kies is a fickle pig. Sometimes you're using the wrong cable or usb port.
Click to expand...
Click to collapse
wow this is unbelievable when it went to reboot and never came back on and it makes the Microsoft Windows keep asking you need to format a disk in drive D before you can use it so itslight turning itself on in 3 seconds in 3 to 4 second intervals. then the computer started loading drivers for a Qualcomm CDMA technologies MSM now where would that come from?
evidently from what i have gathered through many hours of reading and studying, i have hard-bricked my device. like i reported in previous post my computer will recognize it in short intervals. it continues to attempt to download drivers for Qualcomm CDMA.....but disconnects before finishing installing. one time ofter unplugging it left an icon that read.....oh i forget but i immediately looked it up and all reports from xda says that means a hard brick. called service provider and they are sending out new one but what happens when they recieve it and see that it has been rooted? i would really like to keep trying to save the phone i have. any suggestions?
If you are using files from our section, you must have the SGH-I717 device.
You mentioned CDMA. And although present in the chipset, this version of the note is a GSM device, and runs on the following networks respectively.
AT&T, BELL, ROGERS, TELUS, STRAIGHTALK, and carriers in far eastern countries....
Please link us the information on the Odin file you used to repair the device.
It appears you may have inadvertently pushed the wrong image. Perhaps for the N7000 ???
If that's the case, then the device will be hard bricked, and can be repaired using a JTAG repair service.
After you post the rom information, we will know for sure.
A general search for JTAG information will link you to several threads that talk about the service.
I'm sorry you are in this predicament, but for $50 U.S. dollars the device can be repaired.
I do not condone sending the device back under warranty, as it technically is not a defect, and is not the fault of Samsung or the carrier.
Good luck to you Sir.....g
gregsarg said:
If you are using files from our section, you must have the SGH-I717 device.
You mentioned CDMA. And although present in the chipset, this version of the note is a GSM device, and runs on the following networks respectively.
AT&T, BELL, ROGERS, TELUS, STRAIGHTALK, and carriers in far eastern countries....
Please link us the information on the Odin file you used to repair the device.
It appears you may have inadvertently pushed the wrong image. Perhaps for the N7000 ???
If that's the case, then the device will be hard bricked, and can be repaired using a JTAG repair service.
After you post the rom information, we will know for sure.
A general search for JTAG information will link you to several threads that talk about the service.
I'm sorry you are in this predicament, but for $50 U.S. dollars the device can be repaired.
I do not condone sending the device back under warranty, as it technically is not a defect, and is not the fault of Samsung or the carrier.
Good luck to you Sir.....g
Click to expand...
Click to collapse
first off I would like to say thank you for all of your guys help.how do I send a link from the Odeon file that I used?and I am pretty positive that it is hard brick.I do not want to be dishonest in I want to resolve this on my own.oops I mean with your help of course.
Simply copy/paste the link into your next reply.
then we can see the source for the file.....g
okay i took your advice and sent the replacement back. your right if i can't spend $50 to save my $600 phone i shouldn't start on this road. however as thorough as i usually am i am not very organized. i started installing upgrades and little modifications for my friends and family as a little hobby. then other people started asking me for this and that, so i would help them. so, i have downloaded a LOT of things to my computer (ROM's, MOD's,, etc.) for different android phones and from different forums (now i only use software from xda) and i rarely delete or uninstall anything. needless to say my computer started to look like a teenagers bedroom. i have now started to organize things so i can get a better grip on what i'm doing so i can take this more serious. with that being said i can't remember exactly what file i used to flash with Odin. is there some kind of log that is automatically kept by Odin?.....i have decided to try to use a phone jig to get my phone to at least turn on. is that a wise move? i am studying all there is available on the ins and outs of phone jigs. if that fails i will send off to be JTAG'd. if there is any advise or info that you feel i could use please send my way. thank you.
oh one more thing i do not own any windows phone software or cdma software, but i was connected to my friends nokia lumia 822 hot spot when i flashed my phone. and that's when it went dead and popped up as a cdma devise. could that have anything to do with it? sounds farfetched but so does alot of things that we are capable of doing nowadays.
The jig doesn't work for the note 1, so it's off to the JTAG guy.
ouch! can u plz send me a link i cant seem to find any. thank you.
www.mobiletechvideos.com
izdabombest1 said:
okay i took your advice and sent the replacement back. your right if i can't spend $50 to save my $600 phone i shouldn't start on this road. however as thorough as i usually am i am not very organized. i started installing upgrades and little modifications for my friends and family as a little hobby. then other people started asking me for this and that, so i would help them. so, i have downloaded a LOT of things to my computer (ROM's, MOD's,, etc.) for different android phones and from different forums (now i only use software from xda) and i rarely delete or uninstall anything. needless to say my computer started to look like a teenagers bedroom. i have now started to organize things so i can get a better grip on what i'm doing so i can take this more serious. with that being said i can't remember exactly what file i used to flash with Odin. is there some kind of log that is automatically kept by Odin?.....i have decided to try to use a phone jig to get my phone to at least turn on. is that a wise move? i am studying all there is available on the ins and outs of phone jigs. if that fails i will send off to be JTAG'd. if there is any advise or info that you feel i could use please send my way. thank you.
oh one more thing i do not own any windows phone software or cdma software, but i was connected to my friends nokia lumia 822 hot spot when i flashed my phone. and that's when it went dead and popped up as a cdma devise. could that have anything to do with it? sounds farfetched but so does alot of things that we are capable of doing nowadays.
Click to expand...
Click to collapse
A clean and reliable PC environment is at least as important as the proper files.
Maintenance is king on any file structure...
And while I feel badly that your device was damaged, I applaud your choice in sending back the replacement device.
People forget that when these phone manufacturers take back damaged product under warranty, they increase the price of new devices to maintain the same profit margin.
We pay at the register for others mistakes.
Again, thank you for your honesty, and integrity in this matter.
And don't worry, the device will return quickly, and will run like new.
We are always willing to assist users here through the lessons we have learned, and it becomes much more gratifying when we know the caliber of the user we help.
You have earned high marks for your choices today, and stand with the most reputable Members of XDA ....IMHO
Should you need anything upon the return of your device, consider it done ...g
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app

My S2 does not Boot at all may be HARDBRICKED :'(

Okay... initially i was on Custom Rom Jellybam based on Jellybean 4.2.1 with Siyah Kernel V5 sync.
I want to upgrade to Kitkat 4.4
so i downloaded all the required files , made nandroid backup , reboot the phone and started transferring all ROM files into internal SD card Sdcard0
I am doing all this is Linux Mint..
It started transferring and got stuck 33.2%
so i removed the cable and try it again and this time again it stucked again
and my phone reboots automatically ..
Samsung logo main screen shows and loading starts but after completing loading bar .. it Freezes there and i cannot boot into recovery either..
SO on searching on goggle for solutions .. it states that i have to flash kernel again through ODIN again in order to access recovery to do Factory Reset..
SO i did the same flashed siyah kernel v4.1.5
it shows its successfully flashed BUT on reboot it shows Yellow triangle and freezes there and i still cannot access recovery and it also freezes on battery charge animation
So i again try to flash using ODIN this time again with siyah kernel 6.b5
and still same problem ,, so pull out battery and leave for 5 minutes and again boot phone in download mode and flash again using odin siyah kernel 6.0b5 and upon Reboot PHONE does not Boot.. I was literally Shocked and i try to pull out battery .. put back in and Try to charge but it shows no animation nor it is going in download mode.
Please HELP ..
Suggest me some ways because 1 year before I've replaced the motherboard due to same problem caused by factory reset in stock ICS rom when There was Hard Brick problem in Stock ICS roms..but it was in warranty so there was no problem but this time its out of warranty..
I didn't do anything wrong and still it got HARD BRICKED and still not have a clue what went wrong ??
No booting at all = nothing anyone here can do = replace motherboard or get a new phone (JTAG also very unlikely to work).
MistahBungle said:
No booting at all = nothing anyone here can do = replace motherboard or get a new phone (JTAG also very unlikely to work).
Click to expand...
Click to collapse
i know. this.. its TOO scary to hear this thing..
If anything is possible ?? Anything ??
i will give every info you needed..
And what exactly do you expect people here to suggest ? If the phone won't boot you can:-
*Try a jig (0.0000000001% chance of working, but try it if you like torturing yourself with false hope)
*Try a JTAG if the person who tries is prepared to do it on the basis of 'you only pay them if the JTAG is successful' (also 0.0000000001% chance of working, try this if you like torturing yourself with false hope even more)
*Replace the motherboard; 99.99% chance of successfully fixing the phone provided there's nothing else wrong hardware-wise
MistahBungle said:
And what exactly do you expect people here to suggest ? If the phone won't boot you can:-
*Try a jig (0.0000000001% chance of working, but try it if you like torturing yourself with false hope)
*Try a JTAG if the person who tries is prepared to do it on the basis of 'you only pay them if the JTAG is successful' (also 0.0000000001% chance of working, try this if you like torturing yourself with false hope even more)
*Replace the motherboard; 99.99% chance of successfully fixing the phone provided there's nothing else wrong hardware-wise
Click to expand...
Click to collapse
i'll go to samsung care tomorrow but i am still wondering what happened wrong as i did nothing wrong at all then still how it hardbricked ??
... probably you only need to flash a correct running ROM. Did you try to flash an original Samsung firmware? Did you wipe data before starting the new ROM? Otherwise there is a big chance for a bootloop.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
... probably you only need to flash a correct running ROM. Did you try to flash an original Samsung firmware? Did you wipe data before starting the new ROM? Otherwise there is a big chance for a bootloop.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
the guide suggest to flash kernel so that i can wipe/data factory reset .. i tried that with odin but phone does not boot and freezes at Samsung logo when loading bar finishes... so i thought to flash stock ics rom but before doing that after flashing kernel again it reboot and hard bricked... and does not boot after all even in download mode..
So this happens after i flashed kernel 3rd time and i still have no clue why did it happened..
and customer care asks it would costs at least Rs.8,000 or $133 to replace a Motherboard.. which is too costly...
can anyone suggest me any other things.. ay alternatives ??
There are no other alternatives. Just because you refuse to accept reality doesn't make it anything less than reality.
And isn't it wonderful to see people still not reading threads & suggesting stuff that's impossible: 'probably you only need to flash a correct running ROM'. I mean, seriously ? The OP has already stated on multiple occasions that the phone will not boot. At all. How do you propose he flash 'a correct running rom' exactly ?
MistahBungle said:
There are no other alternatives. Just because you refuse to accept reality doesn't make it anything less than reality.
And isn't it wonderful to see people still not reading threads & suggesting stuff that's impossible: 'probably you only need to flash a correct running ROM'. I mean, seriously ? The OP has already stated on multiple occasions that the phone will not boot. At all. How do you propose he flash 'a correct running rom' exactly ?
Click to expand...
Click to collapse
hahah... i know .. people are sometimes too lazy to read ..
I just need to know.. what's wrong happened so that it will not happen next time..
Honestly ? That's almost impossible to say. Best guesses based on what you've told us are you simply got a bad flash, which is a small possibility (maybe 1 in 10,000) with any given flash. Or, I've had a theory based on instances like this I've seen on here over the past two yrs which involves the connection between phone & PC being broken for a split second during the flash (possibly caused by less than reliable USB ports on the PC or something else intermittent on the PC side), but not long enough for the disconnection to 'register' on the PC-side like it normally does when an external device is disconnected (you get that exclamation sound & a notification that the device has been disconnected in your taskbar).
It doesn't sound like you did anything 'wrong', put it that way. So I'm not sure there's a whole lot you can do to avoid it in future. Unfortunately, that's the risk all of us take whenever we flash stuff to our phones; every single flash (even CWM ones) involves that small risk (due to the nature of the NAND; having a write abruptly interrupted partway through can 'scramble' it) and the only way you can mitigate that 100% is to not flash anything at all.
Well .. I've already seen several people claiming a 'hardbrick' while the phone was only stuck in a boot loop. Especially while flashing only boot.img / system.img (which the OP claimed) it's normally really hard to create a hardbrick. That was the reason to suggest to try to flash an original firmware.If instead the bootloader is messed up, there is not much to do ...
AndDiSa said:
Well .. I've already seen several people claiming a 'hardbrick' while the phone was only stuck in a boot loop. Especially while flashing only boot.img / system.img (which the OP claimed) it's normally really hard to create a hardbrick. That was the reason to suggest to try to flash an original firmware.If instead the bootloader is messed up, there is not much to do ...
Click to expand...
Click to collapse
well I've got my s2 since past 1.7 years and nothing wrong has happened till date as I've flashed plenty of ROMS earlier.. its nothing new to me.. i am well known to these things..
i have exams from 1 month and s2 was creating problems such as freezes while scrolling in any application and automatic reboot from many time
i have no time to solve this during exams..
so i tried to solve this issue yesterday by upgrading to new ROM.. downloaded ROM files .. and ready to transfer to internal sd where copying stuck at 33% 2 times and at 2nd time from where main problem starts.. of freezing at bootscreen and then i trty to solve by flahsing new kernel thriugh ODIN where Hardbrick was TOTALLY UNEXPECTED.. as I've done this earlier time too but nothing happened wrong that time... i was literally surprised that it does not boot at all even i didn't done any mistakes at all & followed procedure.. even ODIN every time shows "Flash Successful"
i've attached screenshot of ODIN flashing.. so you can check for yourself..
May be there is a possibility of battery dying and phone cannot charge the battery ??
i've no spare battery to check .. so will go soon to care to check if its battery problem or not..
MistahBungle said:
Honestly ? That's almost impossible to say. Best guesses based on what you've told us are you simply got a bad flash, which is a small possibility (maybe 1 in 10,000) with any given flash. Or, I've had a theory based on instances like this I've seen on here over the past two yrs which involves the connection between phone & PC being broken for a split second during the flash (possibly caused by less than reliable USB ports on the PC or something else intermittent on the PC side), but not long enough for the disconnection to 'register' on the PC-side like it normally does when an external device is disconnected (you get that exclamation sound & a notification that the device has been disconnected in your taskbar).
It doesn't sound like you did anything 'wrong', put it that way. So I'm not sure there's a whole lot you can do to avoid it in future. Unfortunately, that's the risk all of us take whenever we flash stuff to our phones; every single flash (even CWM ones) involves that small risk (due to the nature of the NAND; having a write abruptly interrupted partway through can 'scramble' it) and the only way you can mitigate that 100% is to not flash anything at all.
Click to expand...
Click to collapse
i totally understand what you wanted to say..
i now how to do these things.. i know the risks...
still don't know what happened wrong..
hey guys.. i just went to samsung care and they told me that PCB need to be replaced and it ill costs me INR 8,000 or $133.33 which is too expensive and i told them if any other thing can be done .. i see some videos in youtube stating DEAD or HARDBRCIKED S2 can be fixed by changing its POWER IC...
so i told them that thing then they told me that OFFICIALY only Motherbaord could be replaced however I can ask local reapir shops in my city whether they can replace POWER IC or any other such thing which will be cheap..
So i went to one of the Repair shop (MAIN one in my CITY) & i ask them .. after checking he said.. I'll check IF Repalcing POWER IC will solve the problem or not... otherwise Motherboard need to be replaced..
the cost of POWER IC replacement is INR 800 or $13.33
otherwsie
he'll replace the motherboard for INR 3000 or $ 30..
so i deposoited my Phone to him and will go again in 2 hours.. to check if POWER IC replacement will fix the problem or not..
I am wondering if it will be safe to do this from unofficial reapir centre whether he will not take orignal parts of my phone internals ? however every people go to his shop.... Motherboard repalcing by him costs only INR 3000 ($50) while officialy its INR 8000($133)..
why is there so much price difference..??
IF POWER IC replacement is good idea ??
i just don't want to be in another problem...
Probably a 2nd hand board. If it were me, I'd be replacing the whole board. I wouldn't want someone fartarsing around replacing individual components on a board that size no matter how competent they claim to be. But that's up to you/how much money you're prepared to spend.
As to whether what he's going to do (replacing an individual component) will definitely fix it, how do you expect us to possibly know that ? You're the one who's met the person who's going to fix your phone/we have absolutely no knowledge whatsoever of this person/their competencies. I know one thing though, in Australia, nobody who repairs Samsung phones for a living (I.E a commercial operation/business) would replace an individual component like that. Only 'spare timers' would do that.
MistahBungle said:
Probably a 2nd hand board. If it were me, I'd be replacing the whole board. I wouldn't want someone fartarsing around replacing individual components on a board that size no matter how competent they claim to be. But that's up to you/how much money you're prepared to spend.
As to whether what he's going to do (replacing an individual component) will definitely fix it, how do you expect us to possibly know that ? You're the one who's met the person who's going to fix your phone/we have absolutely no knowledge whatsoever of this person/their competencies. I know one thing though, in Australia, nobody who repairs Samsung phones for a living (I.E a commercial operation/business) would replace an individual component like that. Only 'spare timers' would do that.
Click to expand...
Click to collapse
well i ask a local official samsung mobile shop onwer whom we knows from years ... he said.. he is the main person in our city and everyone goes to him for repair... and he thinks he won't do such as thing..
SO i gave my phone to him..
and about power IC replacment there are some videos on youtube i checked before asking for POWER IC replacement....
so thought may be it'll work.. :/
hope for the best..
anyways thanks..
MistahBungle said:
And what exactly do you expect people here to suggest ? If the phone won't boot you can:-
*Try a jig (0.0000000001% chance of working, but try it if you like torturing yourself with false hope)
*Try a JTAG if the person who tries is prepared to do it on the basis of 'you only pay them if the JTAG is successful' (also 0.0000000001% chance of working, try this if you like torturing yourself with false hope even more)
*Replace the motherboard; 99.99% chance of successfully fixing the phone provided there's nothing else wrong hardware-wise
Click to expand...
Click to collapse
What's up with the sarcasm? Pretty sure that's not what this forum is about.
Sent from my SCH-R950 using xda app-developers app
^^^^
Unless you're one of the 'slow kids up the back', you'll know there is absolutely nothing anyone on a phone forum can do for a person like the OP who has a phone in that state. How do I know this ? Experience. I have seen thousands of examples on here exactly like this in 2 & a bit years. They all turn out the same whether you tell people straight up, or whether you stuff them around for two weeks trying stuff that has no chance of working.
And as it's turned out, I was absolutely correct in my initial post. I'm not a believer in having people try a bunch of stuff that has no chance whatsoever of working which builds up their hopes, only to have them end up disappointed when the 'stuff that had no chance of working in the first place' doesn't work (funnily enough ).
I'd much rather be honest with people from the outset, so they can either have their phone repaired & working again (or buy a new phone if people decide that's a better option) sooner rather than later, because I know what it's like to be without a (decent) phone for week/however long.
But you're not capable of comprehending this, are you ? You'd rather make your 2nd post on here a 'gob off' re: something you know absolutely nothing about.
So . the thing is IF POWER IC replacemet will fix the phone or not...i've done some googling and found that the POWER IC replacemet works for users..
If anyone here in this forum has tried this and successfuly saved his phone instead of replacing whole Motherboard.. ??
MistahBungle said:
^^^^
Unless you're one of the 'slow kids up the back', you'll know there is absolutely nothing anyone on a phone forum can do for a person like the OP who has a phone in that state. How do I know this ? Experience. I have seen thousands of examples on here exactly like this in 2 & a bit years. They all turn out the same whether you tell people straight up, or whether you stuff them around for two weeks trying stuff that has no chance of working.
And as it's turned out, I was absolutely correct in my initial post. I'm not a believer in having people try a bunch of stuff that has no chance whatsoever of working which builds up their hopes, only to have them end up disappointed when the 'stuff that had no chance of working in the first place' doesn't work (funnily enough ).
I'd much rather be honest with people from the outset, so they can either have their phone repaired & working again (or buy a new phone if people decide that's a better option) sooner rather than later, because I know what it's like to be without a (decent) phone for week/however long.
But you're not capable of comprehending this, are you ? You'd rather make your 2nd post on here a 'gob off' re: something you know absolutely nothing about.
Click to expand...
Click to collapse
dude please if anything irritates you .. then i'm sorry..
i ts just its first time happened with me...s i am worried about my phone..
that's all :/

Categories

Resources