Hi guys,
I've been trying to update my Lumia 800 (RM-801, detects as RM-819, Qualcomm bootloader) using Nokia Care Suite. I've tried just about everything that I can think of and still I cannot get this useless bit of software to go past the "lost connection" screen. Just to ensure clarity, I am on Qualcomm's bootloader (NOT DLOAD) and have tried on both Win8 x64 and Win7 x86 with no luck anywhere. I don't care if I have to lose the QC bootloader to do this, I'm done with custom ROMs anyway. Can someone shed any light on why NCS stubbornly refuses to work on my phone?
Thanks.
You need to use QPST instead of NCS for Qualcomm-bootloader phones.
Related
I had on the phone 1600.3013.8107.11502. Then I update to 1600.3015.8107.12070. I did it by the refurbish option in the NCS. One month later i wanted to flash on 1600.3030.8773.12120
When i plug phone, the computer detected it other than ever. I saw Qualcomm CDMA Technologies MSM and removable disk with question about formatting. I clicked cancel but NCS does not detect the phone. My computer couldn't install driver for Qualcomm CDMA Technologies MSM. I tried it on others computers but on all its the same, i can't flash this ****. I was looing for solution on others forums but no one can help with this.
Thx for answers.
You have the Qualcomm bootloader. NCS does not recognize this bootloader. I f you want NCS to recognize your device, you will need the NOKIA DLOAD bootloader. However, the Qualcomm is the unlocked one, so depending on your preferences, you can leave it on the Qualcomm. With the unlocked bootloader (which you have) you will only need an other flashing method. Those can be found on the forums here.
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
i have amlmost same problem, but my phone is dead, when i turn it on it stays ond nokia screen
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
Your cellphone is working?
I downloaded NSS but it doesn't detect my phone
And if i had the Qualcomm bootloader,How do i go in recovery?
just want to make a nand backup for a friend and root his stock phone.
I own a sgs+ with a custom rom of andoid so i'm noob at wp.
thx,
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
If you have this error, please check if the phone restarts in this step or just
stays in Normal mode (windows screen). There are some software versions that
will not respond to the OSBL change command. So just try to flash different
version (via .nb file) and try again.
The other option is the manual restore(hex edit), but its really risky if you don't know
what are you doing.
The problem seems to be caused by version mismatch between the OS and the
baseband firmware. Here the solution and more info.
I also has a problem like: "Are you sure you have development Qcom loader"
when trying to flash rainbow mod FW by lucifer to my lumia 710 using NSS pro v0.48. Does anyone has a same problem with me? all steps that told in http://forum.xda-developers.com/showthread.php?t=1620629 i already been followed. but still i can't flash the FW mod, FYI I already succeed in installing FW with qualcom bootloader before using NSS pro.
Cheers
The great XDA policy won't let me ask this in the interop unlock Q&A thread I frag.
ment.
I used to have FW 12070 installed (059J3G0) on an Lumia 800 (RM-801) - according to all the interop forums, the unlock is possible on HW 2.3 & FW 11412 or 11414.
So after 3 hours of trying, I now have FW 11412 installed (059M062) and I do have HW 2.3 - I achieved this using NCS which according to the interop Q&A forum should replace the bootloader.
Now when I try to check what the desktop windows say about the connected device in the OSBL mode, it say "Nokia USB Connectivity". In non of the iterop unlock forums there is no explanation to what it means - they only refer to either "Disk mode" or "Nokia DLOAD".
Does anyone know?
It's Nokia DLoad... sorry, no way to change this, for now. No one found a firmware with Qualcomm BL, so playing around with fw from navifirm is useless...
Sent from my Lumia 800 using XDA Windows Phone 7 App
Hi,
I've been trying to unlock my Lumia 710 from wind and I'm having a few problems.
What I've done.
- I have QUALCOMM bootloader, since I get the format disk popup in windows.
- Flashed WP Rainbow Mod 7.8 Custom Rom: http://forum.xda-developers.com/showthread.php?t=1654415 using Nokia Lumia 710 Downloader (http://forum.xda-developers.com/showthread.php?t=1665821)
- Installed Zune (I guess drivers as well), Nokia Care Suite (WinUSB Drivers for x64), QUALCOMM Drivers (http://forum.xda-developers.com/showthread.php?t=1669498)
- Downloaded NssPro v0.52
- Followed this tutorial to set-up NssPro for WP7: http://forum.xda-developers.com/showthread.php?t=1721355
What's wrong
- When running NssPro, using the detect button the program says phone not found (yes, its in OSBL mode.), and if I click out I get a pop up saying Nokia Care Suite stopped responding and the program crashes.
Images:
- Phone not Found: http://i.imgur.com/bmcAI.png
- Crashed: http://i.imgur.com/j4Efn.png
I'm running Windows 8 x64.
If anyone could point out what I'm doing wrong would be great.
Thanks,
Karn.
I have your same problem and posted here a question but no one answer me
i hope some one can help us
mine was a orange brand lumia
now i have a raimbow mod
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Hey,
Could you explain this to me in detail.
Thanks.
Ariakan said:
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Click to expand...
Click to collapse
run it in administrator mode and compatibility windows 7.
My original Vodafone Spain branded Nokia Lumia 800 had no problems at all since today. I have never tried to unlock it and has always installed the official updates through Zune.
Today I've received the notification for the 7.8 update! Yay! I started the installation through Zune (as always). Everything was ok: steps 1 trough 5 (downloading, transferring, etc.). And then, step 6: rebooting the phone. It rebooted, but the usual "do not unplug" icon didn't show. Instead, the screen was blank and Zune was waiting endlessly for the phone to reboot. A notification came through windows saying that the removable drive must be formatted, which I DIDN'T do. The device manager was showing a "Qualcomm MMC Storage USB device" along with another one with a yellow asterisk.
Searching the internet I found that my phone has a special Bootloader, which was not supposed to be available to the final users.
I know many people here would love to have the Qualcomm Bootloader, but what I would like right now is to have the standard DLOAD Bootloader!
So here is my question: is it possible to restore the phone to the standard DLOAD mode so I could install the 7.8 update through Zune?
I've tried installing the Qualcomm drivers, which installed flawlessly. Now I have no yellow asterisks, but a new COM port ("Qualcomm HS-USB Diagnostics 9006 (COM5)"), but Zune is still waiting for my phone to reboot....
UPDATE: I have tried with "Seven-Eighter" by Windows Phone Hacker wit the same result. Obviously is an issue related to the bootloader of my phone.
NOTE TO THE ADMINS: Should I better post this in the "Lumia 800 Windows Phone Development " section?
I've finally found the solution!
Just hold the camera button when Zune restarts the phone. Then the usual "do not unplug" screen appears and the process continues flawlessly.
Hi,
For lumia 800 - only way to change boot-loaders is through Test Points and ATF Flasher.
BR
Hi everyone:
I am using Rogers Lumia 710. Since haven't seen the wp7.8 update pushed to my phone, I decided to update it by myself. What I did is following:
1. Downloaded the latest firmware with NaviFirm 1.5, and chose the APAC1 Black one under RM-803 (mine is RM-809)
2, Installed the Nokia Care Suite, changed the ROM's name to my phone's product code, successfully flashed it. All my apps were gone though. Using my live ID to logon, I could get all my contacts, calendars back.
3, Using the NssPro 5.0. I flashed the OSBL file to Qualcomm.
So far everything was fine. The problem started below.
4, In NssPro, chose Simlocks -> WP7 -> Unlock
The NssPro switched the phone to OSBL mode, I could see the screen turned to dark after a short vibration, then NssPro said could not find the phone. The snapshot is attachd.
I tried many times and NssPro just couldn't find the phone.
Is there any one knows what is the cause and how to solve it?
Thank you guys.
jgprint said:
Hi everyone:
I am using Rogers Lumia 710. Since haven't seen the wp7.8 update pushed to my phone, I decided to update it by myself. What I did is following:
1. Downloaded the latest firmware with NaviFirm 1.5, and chose the APAC1 Black one under RM-803 (mine is RM-809)
2, Installed the Nokia Care Suite, changed the ROM's name to my phone's product code, successfully flashed it. All my apps were gone though. Using my live ID to logon, I could get all my contacts, calendars back.
3, Using the NssPro 5.0. I flashed the OSBL file to Qualcomm.
So far everything was fine. The problem started below.
4, In NssPro, chose Simlocks -> WP7 -> Unlock
The NssPro switched the phone to OSBL mode, I could see the screen turned to dark after a short vibration, then NssPro said could not find the phone. The snapshot is attachd.
I tried many times and NssPro just couldn't find the phone.
Is there any one knows what is the cause and how to solve it?
Thank you guys.
Click to expand...
Click to collapse
UPDATE: Problem Solved!
I was using Win7 64 bit.
Tried anther computer which is runing WinXP 32bit. Installed NCS, ZUNE and NSS Pro 0.54
The trick is:
If you connect the phone and use NSS to unlock it, NSS will turn the phone mode to OSBL mode, then it stops, just leave the phone there without any further actions. What I did was I disconnect the phone then re-plug it, click Unlock in NSS again, amazingly, it searched the phone and found a place to change. At that time the phone was recognized as NAND drive.
After NSS said successfully unlocked, I tried Fido card. The phone asked PIN and I typed in 8 zeros, then I could make phone call with Fido network.
Now my phone is unbranded, upgraded to wp7.8 and sim-unlocked. Bingo!
Hope this helps
jgprint said:
UPDATE: Problem Solved!
I was using Win7 64 bit.
Tried anther computer which is runing WinXP 32bit. Installed NCS, ZUNE and NSS Pro 0.54
Click to expand...
Click to collapse
I did not exactly understand what was your problem but I do have a problem with the drivers.
I looked in the sreenshot, what does it say in the list, just right from USB pin layout? For me, I get a not working Qualcomm driver and in this device list something like 'usb disk' appears 3 times (I don't remember the exact words, not at home to check). Instead of showing Nokia (or something) on first line.
I am wondering if we had same problem.. do I need to wipe my pc and install 32 bit win7? doesn't sound like a great idea. I tried virtualbox but I can't pass the usb through the host.