Related
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
My htc one is rooted and i have twrp 2.5, problem is i factory reset and wiped the sd card leaving me with no data on the phone, not even my restore point. question is, my pc doesnt see my device when plugged in to install a new rom... any help would be appreciated,
madgreek80 said:
My htc one is rooted and i have twrp 2.5, problem is i factory reset and wiped the sd card leaving me with no data on the phone, not even my restore point. question is, my pc doesnt see my device when plugged in to install a new rom... any help would be appreciated,
Click to expand...
Click to collapse
install drivers this should allow your computer to see it
joshuadjohnson22 said:
install drivers this should allow your computer to see it
Click to expand...
Click to collapse
do you have a direct link, the install drivers i am using dont seem to be working...tried different usb ports and restarted my pc
madgreek80 said:
do you have a direct link, the install drivers i am using dont seem to be working...tried different usb ports and restarted my pc
Click to expand...
Click to collapse
download all in one toolkit boot into bootloader make sure is says fastboot usb at the top then use the toolkit
skinsfanbdh said:
download all in one toolkit boot into bootloader make sure is says fastboot usb at the top then use the toolkit
Click to expand...
Click to collapse
big thanks!!! everything is squared up!:laugh:
great:good:
Hello. I'm annoyed
I rooted to get rid of problems... So
I followed these tasks: http://forum.xda-developers.com/showthread.php?t=1653566 and the root worked for a few days - then moved into a boot loop.... how/why... I don't know.
Ive tried many of the different .aos files to find a correct one for my 101g9 250gb, but I still can't get it out of the loop.
This is where I've been getting the different Aos files: http://forum.xda-developers.com/showthread.php?t=1468925
I get 2 different results 1)error 207 (update failed) or 2) boot loop.
One stange thing did happen once - It's managed to reload the android installer, I selected a language, then it crashed again. Of course I tried the same thing again, but it never got past the boot loop again.
After 2 weeks of trying, I'd like some help.
I always have it plugged in. It's not the battery. It's the HDD model and I don't know exactly which version came with the device. I think 4.0.25.. not 100% sure
Please help
I don't have the HDD model so don't know what to tell you exactly..
What I would do on my flash model is boot into recovery. completely reformat the system and use recovery to update the firmware with an Archos firmware (aos file) onto it.
Reformating it from recovery would bring the filesystem back to stock so it should fix anything wierd any of the other roms might have done. So dropping an Archos firmware on it should in theory fix it. Though you WILL lose your root and anything else you have on the drive.
Djirin said:
I don't have the HDD model so don't know what to tell you exactly..
What I would do on my flash model is boot into recovery. completely reformat the system and use recovery to update the firmware with an Archos firmware (aos file) onto it.
Reformating it from recovery would bring the filesystem back to stock so it should fix anything wierd any of the other roms might have done. So dropping an Archos firmware on it should in theory fix it. Though you WILL lose your root and anything else you have on the drive.
Click to expand...
Click to collapse
Thanks for your help, but no luck- that didn't work. I'm sure I lost all my data a long time ago with the amount of reformats I've done. What I'm curious about is, can the tablet actually become a brick just by using these rooted firmwares? I'm assuming that it's fine and that I just have to 'crack to code' to installing the right firmware in the right order.....
I'm still curious if anyone else has had this problem..
Hmm.. Try going back into recovery and try the Reset Android option?
Maybe do Reset Android. Reformat Device. Upgrade Firmware?
The device boots.. so it has to be something causing it.. Have you tried to see if you can use ADB to get into the device and look at any log entries?
Djirin said:
Hmm.. Try going back into recovery and try the Reset Android option?
Maybe do Reset Android. Reformat Device. Upgrade Firmware?
The device boots.. so it has to be something causing it.. Have you tried to see if you can use ADB to get into the device and look at any log entries?
Click to expand...
Click to collapse
ADB? ok, I didn't know what it was. But it's now installed and I followed a random setup on youtube, but when I type ADB devices, nothing comes up.
So now I have it installed, but I so far I can't get win7 to detect the tablet in device manager
Regarless, can the ADB detect problems on the tablet when the archos is only connected waiting for the AOS file (A101H-REC - 299MB)?
Btw, you've already got me waaaaay over my head on this stuff - but still, I'm learning.
pwnami said:
ADB? ok, I didn't know what it was. But it's now installed and I followed a random setup on youtube, but when I type ADB devices, nothing comes up.
So now I have it installed, but I so far I can't get win7 to detect the tablet in device manager
Regarless, can the ADB detect problems on the tablet when the archos is only connected waiting for the AOS file (A101H-REC - 299MB)?
Btw, you've already got me waaaaay over my head on this stuff - but still, I'm learning.
Click to expand...
Click to collapse
Let me join the conversation
Adb works only is it is enabled in developer settings.
What kind of system do you have in use?
In your case i would probably try exporting hdd in sde. This allows you to browse files inside your hdd in linux operating system through usb.
If it is empty, i would export data partition through sde. This allows you to see if there are any files in your data partition.
You said that the device bootloops, yes? That means that the reformat device is not working. It would remove the system, so you shouldnt even see the bootanimation.
Sent from my ME301T using xda app-developers app
julle131 said:
Let me join the conversation
Adb works only is it is enabled in developer settings.
What kind of system do you have in use?
In your case i would probably try exporting hdd in sde. This allows you to browse files inside your hdd in linux operating system through usb.
If it is empty, i would export data partition through sde. This allows you to see if there are any files in your data partition.
You said that the device bootloops, yes? That means that the reformat device is not working. It would remove the system, so you shouldnt even see the bootanimation.
Sent from my ME301T using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks - any advice is welcome. I only have windows7 - Sorry.
As for the bootloop, yes that's the status. I hadn't even considered that the reformatting process wasn't actaully working [but it is] - I reformatted the device and didn't install an AOS. now every restart brings me straight into the Recovery menu [which should happen i assume].
So, with a "clean" but stubborn device, what would you advise to try to isolate the problem? (rather than me simply blindly trying random things)
Thanks
pwnami said:
Hi, thanks - any advice is welcome. I only have windows7 - Sorry.
As for the bootloop, yes that's the status. I hadn't even considered that the reformatting process wasn't actaully working [but it is] - I reformatted the device and didn't install an AOS. now every restart brings me straight into the Recovery menu [which should happen i assume].
So, with a "clean" but stubborn device, what would you advise to try to isolate the problem? (rather than me simply blindly trying random things)
Thanks
Click to expand...
Click to collapse
So reformat works. Have you tried to flash the official 4.0.28(http://update.archos.com/9/gen9/gen9_4.0.28/firmware_archos_it4.aos)?
After searching about your error 207, I found this:http://forum.archosfans.com/viewtopic.php?f=35&t=56037
Code 207 is issued by aosparser when the .aos upgrade file doesn't
pass the signature check.
...
There's more bad news... If the genuine original .aos files are also
giving the same error it means the signing keystore may also have been
damaged.
Click to expand...
Click to collapse
Of course, this is for Archos 5, so hopefully this is not the case.
julle131 said:
So reformat works. Have you tried to flash the official 4.0.28(http://update.archos.com/9/gen9/gen9_4.0.28/firmware_archos_it4.aos)?
After searching about your error 207, I found this:http://forum.archosfans.com/viewtopic.php?f=35&t=56037
Of course, this is for Archos 5, so hopefully this is not the case.
Click to expand...
Click to collapse
Yeah, I've used the aos from the archos site a bunch of times - still no luck. btw, that link to the 4.0.28 didn't work....
by "Flash" I hope you mean install.... not some other random process
pwnami said:
Yeah, I've used the aos from the archos site a bunch of times - still no luck. btw, that link to the 4.0.28 didn't work....
by "Flash" I hope you mean install.... not some other random process
Click to expand...
Click to collapse
Yeah... I just noticed it was broken. And yes, I meant install.
I am sorry, but I'm out of ideas.
Sent from my GT-I9100 using xda app-developers app
julle131 said:
Yeah... I just noticed it was broken. And yes, I meant install.
I am sorry, but I'm out of ideas.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So, do you know if I can access/use ADB on a win7 pc when the archos doesn't have an aos on it?
http://forum.xda-developers.com/showthread.php?t=2104491&highlight=wlan
You could try this. it's written that it doesn't work on hdd model. but it can't get much worse it think. If I understand things correctly, you don't need to have installed any aos before installing this rom. with other roms you get a archos.ext4.update so you need a running system. yust give it a try but don't blame me if your tablet's completely dead afterwards. i don't know what will happen.
Or you could just follow the steps 1-7 (from link above!) to get cwm, maybe that helps for sth, but i don't know.
sry, but my writing style is bad. and do it on your own risk, I'm not that expirienced but that's what I would do...
Good luck
noaddress said:
http://forum.xda-developers.com/showthread.php?t=2104491&highlight=wlan
You could try this. it's written that it doesn't work on hdd model. but it can't get much worse it think. If I understand things correctly, you don't need to have installed any aos before installing this rom. with other roms you get a archos.ext4.update so you need a running system. yust give it a try but don't blame me if your tablet's completely dead afterwards. i don't know what will happen.
Or you could just follow the steps 1-7 (from link above!) to get cwm, maybe that helps for sth, but i don't know.
sry, but my writing style is bad. and do it on your own risk, I'm not that expirienced but that's what I would do...
Good luck
Click to expand...
Click to collapse
I gave up on this 6 months ago. but I turned it on 2 days ago and it magically worked.... Now, it's back in a bootloop again. Everything was working for two days, except sometimes the HDD wasn't reading the files, or the system wasn't detecting the HDD...
Could the HDD be damaged? If so, is there a way to check if it is (I was thinking about the ssd option)
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.
I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
MnTri said:
I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
Click to expand...
Click to collapse
You're using Windows?
ethical_haquer said:
You're using Windows?
Click to expand...
Click to collapse
Yep. Windows 10
MnTri said:
Yep. Windows 10
Click to expand...
Click to collapse
If you have access to a Linux computer let me know, otherwise, I will try and fix it with you on Windows.
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
MnTri said:
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
Click to expand...
Click to collapse
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
ACCIDENTAL
ethical_haquer said:
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
Click to expand...
Click to collapse
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
MnTri said:
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
Click to expand...
Click to collapse
MnTri said:
I can only go to the recovery mode
Click to expand...
Click to collapse
You still have a recovery, is it stock or custom?
Stock
ethical_haquer said:
You still have a recovery, is it stock or custom?
Click to expand...
Click to collapse
MnTri said:
Stock
Click to expand...
Click to collapse
But you still can't connect your phone to your computer?
UPDATING MY PHONE (27TH.3.2023)
So basically I bought the new cable to connect it to computer, and it seems to work now [I knew it because I heard the Windows connecting sound]. But it wouldn't show Samsung J6 folder on computer for now. And I'm in the situation that when I pressed wipe cache partition in the recovery mode it would show:
E:[PDP] lstat /c____/pdp_b__ : 0 - No PDP scenarioI haven't tried going to the safe mode, but with the fact that I'm still stuck at the recovery mode right now (or reboot again and get bootloop) and it seems no one has the answer to the No PDP scenario right now, I don't really know what to do next
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
MnTri said:
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
Click to expand...
Click to collapse
Nice! If this thread is done, put "[RESOLVED]" in the title. That way people will click on on it to get help, not help you.