[Q] noob problem - AT&T HTC One (M7)

My htc one is rooted and i have twrp 2.5, problem is i factory reset and wiped the sd card leaving me with no data on the phone, not even my restore point. question is, my pc doesnt see my device when plugged in to install a new rom... any help would be appreciated,

madgreek80 said:
My htc one is rooted and i have twrp 2.5, problem is i factory reset and wiped the sd card leaving me with no data on the phone, not even my restore point. question is, my pc doesnt see my device when plugged in to install a new rom... any help would be appreciated,
Click to expand...
Click to collapse
install drivers this should allow your computer to see it

joshuadjohnson22 said:
install drivers this should allow your computer to see it
Click to expand...
Click to collapse
do you have a direct link, the install drivers i am using dont seem to be working...tried different usb ports and restarted my pc

madgreek80 said:
do you have a direct link, the install drivers i am using dont seem to be working...tried different usb ports and restarted my pc
Click to expand...
Click to collapse
download all in one toolkit boot into bootloader make sure is says fastboot usb at the top then use the toolkit

skinsfanbdh said:
download all in one toolkit boot into bootloader make sure is says fastboot usb at the top then use the toolkit
Click to expand...
Click to collapse
big thanks!!! everything is squared up!:laugh:

great:good:

Related

[Q] No OS, Computer won't recognize tablet. HELP!

So, first off, I went to flash the new CM 10. 1 nightly, but in order to do so, I had to wipe dalvik and cache (as you all know). However, somehow the wipe also wiped out my internal storage, and made it impossible to flash the new rom. It also wiped my old rom, so now I'm left with just the recovery (i'm using TWRP v2.2.0) and no OS. I've tried plugging it into my computer and moving the rom back onto the root folder so I can flash it again, but the computer (win 7) won't recognize it as a device. It's just in the "unspecified" section titled GT-P7510. I've tried mounting through TWRP and everything, to know avail. Help! How can I move a rom back onto the root folder to save myself, when the computer won't even recognize it as an actual drive?! AH!
Installed proper drivers of tab.
It will Connect properly.
Then you move any ROM to root amd install via recovery.
TheBlackWolf said:
Installed proper drivers of tab.
It will Connect properly.
Then you move any ROM to root amd install via recovery.
Click to expand...
Click to collapse
I tried, didn't work. Unless I have the wrong drivers. (highly doubt it)
jercubsfan said:
I tried, didn't work. Unless I have the wrong drivers. (highly doubt it)
Click to expand...
Click to collapse
If nothing woks, I would think flashing via Odin is the last resort.
Btw I had problem with installing the right drivers before. Instead of trying to look for the specific drivers I have simple installed Kies which ensures the drivers are installed.
sarbashrestha said:
If nothing woks, I would think flashing via Odin is the last resort.
Btw I had problem with installing the right drivers before. Instead of trying to look for the specific drivers I have simple installed Kies which ensures the drivers are installed.
Click to expand...
Click to collapse
I never thought of that!!!! Thank you so much! I'll try it once I get home. Is there a specific version of Odin I need? I know it's Odin3; but what version? Thanks again!
jercubsfan said:
I never thought of that!!!! Thank you so much! I'll try it once I get home. Is there a specific version of Odin I need? I know it's Odin3; but what version? Thanks again!
Click to expand...
Click to collapse
Yes you will need specific versions and specific files.
Search sticky threads.
They help always.

Soft Bricked(How do i Reinstall my OS without using odin?)

Hi
My galaxy s2 is soft bricked it is stuck on the samsung logo when i switch it on . i am able to go into recovery and downloading mode . but i cant reinstall via odin because my USB port doesn;t connect with my PC. so the only way i'll be able to install a Rom or OS is via recovery mode from my SD card. Does anyone have the link for the Rom Or OS i can use? please
Also i used jelly bean 4.1.2
and i am rooted.
Uh get a SDcard reader to download a ROM into a external SDcard then install the ROM from that SDcard??
Superkrypton said:
Hi
My galaxy s2 is soft bricked it is stuck on the samsung logo when i switch it on . i am able to go into recovery and downloading mode . but i cant reinstall via odin because my USB port doesn;t connect with my PC. so the only way i'll be able to install a Rom or OS is via recovery mode from my SD card. Does anyone have the link for the Rom Or OS i can use? please
Also i used jelly bean 4.1.2
and i am rooted.
Click to expand...
Click to collapse
Try to do wipe data and wipe Cache.
Sent from my iPhone using Tapatalk
Superkrypton said:
Hi
My galaxy s2 is soft bricked it is stuck on the samsung logo when i switch it on . i am able to go into recovery and downloading mode . but i cant reinstall via odin because my USB port doesn;t connect with my PC. so the only way i'll be able to install a Rom or OS is via recovery mode from my SD card. Does anyone have the link for the Rom Or OS i can use? please
Also i used jelly bean 4.1.2
and i am rooted.
Click to expand...
Click to collapse
Hi mate,
I have had the same problem.Your USB port doesn't work because it's bent. So get a toothpick or needle, get the battery out and bend your usb port a bit down (you should have ratio 2:1 of space between usb connection to usb port)
cortex69 said:
Hi mate,
I have had the same problem.Your USB port doesn't work because it's bent. So get a toothpick or needle, get the battery out and bend your usb port a bit down (you should have ratio 2:1 of space between usb connection to usb port)
Click to expand...
Click to collapse
hi
i doubt that is the problem because it charges my phone when i connect my phone with my PC. My MTP Application must be corrupted or something.
Superkrypton said:
hi
i doubt that is the problem because it charges my phone when i connect my phone with my PC. My MTP Application must be corrupted or something.
Click to expand...
Click to collapse
If it doesn't connect you even on it might be a usb problem http://forum.xda-developers.com/showpost.php?p=15924419&postcount=13
I have had the same, phone wouldn't boot at all as it was stuck on boot menu (it assumed that was connected to usb)
But if it persist, and it's MTP, just try safemode of you PC operating system (i assume it's windows) and install the driver from here
http://www.modaco.com/topic/361286-...ver-for-mobile-phones-15270-drivers-win-87xp/
go into recovery and format/mount and mount usb storage and connect your pc ;p
if it didn't work... try with a other usb???
Jeetu said:
Try to do wipe data and wipe Cache.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi
Thanks for the reply
I have done that over a hundred times.
it still doesn't work .
-Grift- said:
Uh get a SDcard reader to download a ROM into a external SDcard then install the ROM from that SDcard??
Click to expand...
Click to collapse
Hi
Thanks for the reply. that's what i want a link for a Rom or OS that will work on my device i can install from my SD card . do you maybe know where i can find one that will work?
KingOfDope said:
go into recovery and format/mount and mount usb storage and connect your pc ;p
if it didn't work... try with a other usb???
Click to expand...
Click to collapse
other USB cables don't work either and this is a original samsung data cable. it works with other devices i have tested it many times
There used to be a bunch of CWM flashable stock roms in a thread in the General section. I don't think there'd be anything 'recent' firmware-wise (probably ICS/early JB, you never know though), but the name of the game is to get your phone working so that doesn't matter. Do an XDA/Google search (sorry, don't have a link).
Firstly your phone rooted?
If you are not able to connect to pc then make sure you have usb drivers installed on your pc.
If rooted then pls do a new zip install and bring your phone to working status
Sent from my GT-I9100 using xda premium
Superkrypton said:
Hi
Thanks for the reply. that's what i want a link for a Rom or OS that will work on my device i can install from my SD card . do you maybe know where i can find one that will work?
Click to expand...
Click to collapse
I'm using SlimSaber by Fusion Jack, I don't have any problems... soo you can use that one. Link is in my sig
MistahBungle said:
There used to be a bunch of CWM flashable stock roms in a thread in the General section. I don't think there'd be anything 'recent' firmware-wise (probably ICS/early JB, you never know though), but the name of the game is to get your phone working so that doesn't matter. Do an XDA/Google search (sorry, don't have a link).
Click to expand...
Click to collapse
Yes any OS would be fine just to get it working. but i see all over i need Gapps also
KingOfDope said:
I'm using SlimSaber by Fusion Jack, I don't have any problems... soo you can use that one. Link is in my sig
Click to expand...
Click to collapse
ok thanks . so i flash Slim_AIO_gapps.4.3.build.2 and Slim_minimal_gapps.4.3.build.2?
or do i flash Slim_aroma_selectable_gapps.4.3.build.2 and Slim_minimal_gapps.4.3.build.2?
vishal11in said:
Firstly your phone rooted?
If you are not able to connect to pc then make sure you have usb drivers installed on your pc.
If rooted then pls do a new zip install and bring your phone to working status
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes i am rooted and how do i do a new zip install and install what?
If you can find that thread for firmware zips that @MistahBungle mentioned, you won't need to worry about gapps as it will be included in the zip.
Sent from my GT-I9100 using xda app-developers app
Superkrypton said:
ok thanks . so i flash Slim_AIO_gapps.4.3.build.2 and Slim_minimal_gapps.4.3.build.2?
or do i flash Slim_aroma_selectable_gapps.4.3.build.2 and Slim_minimal_gapps.4.3.build.2?
Click to expand...
Click to collapse
its a unofficial build, and the developer said to only flash the Slim_minimal_gapps.4.3.build.2 so just use that one it comes with:
Google Play (of cours)
Youtube (You may get pixelated video, but it is not the gapps or rom problem, its because google)
Google Music
Gmail
KingOfDope said:
its a unofficial build, and the developer said to only flash the Slim_minimal_gapps.4.3.build.2 so just use that one it comes with:
Google Play (of cours)
Youtube (You may get pixelated video, but it is not the gapps or rom problem, its because google)
Google Music
Gmail
Click to expand...
Click to collapse
ok thank you for all your time you took to help me out . i really appreciate it. will let you know once i succeed.
Hi all. Thanks guys for all your help. I managed to get it into odin mode. Certain pc's didnt pick my phone up but i managed to find one . My old laptop lol. Its all sorted thanks guys

[Q] Buggerit!

Good evening Ladies & Gents.
Firstly can I say, this site has been my bible, and I am so very very grateful for all the work that everyone has put in to making this site what it is.
Now down to business.
I have an HOX+ and have been flashing for about a year now but still consider myself to be a complete nub! first with hox then i broke it and now hox+. Im in a bit of a predicament.
I flashed a version of aosp 4.4 onto the phone, installed from the zip file, cleared the cache, user data and dalvik.
rebooted, and got stuck in a boot loop.
So i went to my backup and restored from there...
boot loop again.
So i went back into bootloader, then fastboot, and reflashed the viper+ 2.0.1 that I had on before.
But when I got stuck on sending boot
Now im stuck in a boot loop, none of my backups will restore properly.
I fear I am hardbricked as I cant get anything to work...
Any help before I have to be back at work tomorrow would be very helpful! and even more appreciated!
Yours
A very frustrated and stressed British nub
Sorry, also, I have checked through xda and I cant seem to find anything that would explain why I am stuck!
flash the boot.img
from a welsh person who can't understand why people cannot flash rom's correctly
Fastboot
Lloir said:
flash the boot.img
from a welsh person who can't understand why people cannot flash rom's correctly
Click to expand...
Click to collapse
I used "fastboot flash boot boot.img" in my cmd, like i always have done, and this time it doesn't want to work...at all
ryutnm said:
I used "fastboot flash boot boot.img" in my cmd, like i always have done, and this time it doesn't want to work...at all
Click to expand...
Click to collapse
you tried fulling wiping? then just flashing the rom + bootimage after
thanks
Lloir said:
you tried fulling wiping? then just flashing the rom + bootimage after
Click to expand...
Click to collapse
No, does that require different fastboot commands?
i have cwm touch recovery installed. Would that make a difference?
Also, could I just say thank you in advance for your help sir!
ryutnm said:
No, does that require different fastboot commands?
i have cwm touch recovery installed. Would that make a difference?
Also, could I just say thank you in advance for your help sir!
Click to expand...
Click to collapse
Unless you mean the user data and cache wipe.
Then yeah i did that
ryutnm said:
Unless you mean the user data and cache wipe.
Then yeah i did that
Click to expand...
Click to collapse
Data/system/cache
Sent from my Nexus 5 using Tapatalk
ryutnm said:
Good evening Ladies & Gents.
Firstly can I say, this site has been my bible, and I am so very very grateful for all the work that everyone has put in to making this site what it is.
Now down to business.
I have an HOX+ and have been flashing for about a year now but still consider myself to be a complete nub! first with hox then i broke it and now hox+. Im in a bit of a predicament.
I flashed a version of aosp 4.4 onto the phone, installed from the zip file, cleared the cache, user data and dalvik.
rebooted, and got stuck in a boot loop.
So i went to my backup and restored from there...
boot loop again.
So i went back into bootloader, then fastboot, and reflashed the viper+ 2.0.1 that I had on before.
But when I got stuck on sending boot
Now im stuck in a boot loop, none of my backups will restore properly.
I fear I am hardbricked as I cant get anything to work...
Any help before I have to be back at work tomorrow would be very helpful! and even more appreciated!
Yours
A very frustrated and stressed British nub
Click to expand...
Click to collapse
Well the bootlooping has something to do with not flashing the boot.img stated by yourself and lloir. About that bug of "Sending boot.img", it happens to me but I fix it by running CMD as administrator , If that doesnt work, try using a different usb port. Preferably one directly to pc/laptop rather than using a hub. Try a 3.0usb port first, if that doesnt work then 2.0usb port.
P.S Without S-Off you can't become hardbricked. Till now I didn't see a single person who bricked their HOX+ unless he received an S-Off developer phone..
Lloir said:
Data/system/cache
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Im now only getting "waiting for device"
which I can only assume means my pc now doesnt even recognise the phone when its booted in bootloader/fastboot usb mode?
ryutnm said:
Im now only getting "waiting for device"
which I can only assume means my pc now doesnt even recognise the phone when its booted in bootloader/fastboot usb mode?
Click to expand...
Click to collapse
stop....Hammer time...
have you got a rom on the sdcard (in cwm) if yes
wipe data/system/cache
then
reboot into bootloader
fastboot flash boot boot.img
if not ----------
full wipe (as above)
adb sideload romname.zip
then reboot into bootloader as above
Lloir said:
stop....Hammer time...
have you got a rom on the sdcard (in cwm) if yes
wipe data/system/cache
then
reboot into bootloader
fastboot flash boot boot.img
if not ----------
full wipe (as above)
adb sideload romname.zip
then reboot into bootloader as above
Click to expand...
Click to collapse
I have the zip on the internal storage as i dont have "sd/ext" or what ever the extention is. When I bought the phone I never had the sd card. Never was able to save anything onto an sd card.
so should i try installing from the zip? even though the fastboot commands arent working?
or would a sideload skip the fastboot commands?
or am i just being completely retarded
Edt - just tried the sideload using the cmd, and i had error: device not found
so windows isnt recognising my phone...it was working this morning
ryutnm said:
I have the zip on the internal storage as i dont have "sd/ext" or what ever the extention is. When I bought the phone I never had the sd card. Never was able to save anything onto an sd card.
so should i try installing from the zip? even though the fastboot commands arent working?
or would a sideload skip the fastboot commands?
or am i just being completely retarded
Click to expand...
Click to collapse
Why am i being ignored you guys lol. Did you try my solution ?
Terribly Sorry
Ghand0ur said:
Why am i being ignored you guys lol. Did you try my solution ?
Click to expand...
Click to collapse
dude, im so sorry - i didnt even see the post!
i will try now!
sorry again
edt - still no joy as for some reason my phone is no longer being recognised by my pc =[
HTC sync uninstalled ?
you have killed adb (if on windows just kick open taskman and kill adb)
or in cmd\terminal adb kill-server
then do adb devices
reboot pc?
try a different usb cable (maybe the one from your charger if you are not using that one)
*edit the above is assuming you are in recovery
IF NOT in recovery, but fastboot_usb mode
then fastboot devices (but you cannot do jack apart from flash boot image)
IF in recovery, you got a few choices
wait 5-10minutes (don't ask, it's a common issue with the X+ and CWM\TWRP)
put the device in adb sideload for a minute or so (^ see above reason)
i have adb issues in CWM\TWRP myself, especially when i have no rom and so on, so i know your frustration, patience young padwan
looking good so far
Ghand0ur said:
Why am i being ignored you guys lol. Did you try my solution ?
Click to expand...
Click to collapse
Lloir said:
HTC sync uninstalled ?
you have killed adb (if on windows just kick open taskman and kill adb)
or in cmd\terminal adb kill-server
then do adb devices
reboot pc?
try a different usb cable (maybe the one from your charger if you are not using that one)
Click to expand...
Click to collapse
So I tried starting cmd in administrator mode [never had to before]
- Didnt work
- Plugged into a different usb slot as lloir suggested, didnt get the "windows does not recognise this device" this time
restarted cmd as admin like Ghandour suggested.
Just managed to install the viperx+ 2.0.1 rom and i am now setting it up!
THANK YOU SO FREAKING MUCH GUYS [and gals if either of you are female]!
do you know why I had to start using cmd as an administrator?
ryutnm said:
So I tried starting cmd in administrator mode [never had to before]
- Didnt work
- Plugged into a different usb slot as lloir suggested, didnt get the "windows does not recognise this device" this time
restarted cmd as admin like Ghandour suggested.
Just managed to install the viperx+ 2.0.1 rom and i am now setting it up!
THANK YOU SO FREAKING MUCH GUYS [and gals if either of you are female]!
do you know why I had to start using cmd as an administrator?
Click to expand...
Click to collapse
might be because of where you have the adb tools. and i'am 100% male
thanks
Lloir said:
might be because of where you have the adb tools. and i'am 100% male
Click to expand...
Click to collapse
well dude, thank you for your help!
I dont understand why though, ive been using this pc the whole time to flash recovery images and boot images and never had to use admin
Thank you
Also a thank you to Ghand0ur for your help as well!
So very much appreciated
ryutnm said:
Also a thank you to Ghand0ur for your help as well!
So very much appreciated
Click to expand...
Click to collapse
Glad you got it working. Just always try those common solutions:
-Restart PC
-Run as admin
-unplug replug
-reboot phone
-try different usb port
-try different usb cable.

[Solved] No Operating System, Bootloop, ADP devices blank

I accidentally (and stupidly) wiped my OS on my DNA. I'm stuck in a bootloop and when I type adb devices it says:
List of devices attached:
(blank)
However, when I am in fastboot and type fastboot devices, it says the serial number of my phone.
Does anyone know of any way for me to get an operating system back installed? I have access to TWRP v2.6.3.0.
I scoured XDA for the past 4 hours looking for anything resembling my situation and found nothing. I tried different approaches that were listed that somewhat fit my situation, but to no avail.
Anyone? Please? I'm pretty literate when it comes to these phones, I just haven't ever come across stupidly wiping everything on my phone, including the OS.
It just freezes at the HTC screen and I don't know how to flash any ROM (or anything at this point) using fastboot.
bhinderoid said:
I accidentally (and stupidly) wiped my OS on my DNA. I'm stuck in a bootloop and when I type adb devices it says:
List of devices attached:
(blank)
However, when I am in fastboot and type fastboot devices, it says the serial number of my phone.
Does anyone know of any way for me to get an operating system back installed? I have access to TWRP v2.6.3.0.
I scoured XDA for the past 4 hours looking for anything resembling my situation and found nothing. I tried different approaches that were listed that somewhat fit my situation, but to no avail.
Click to expand...
Click to collapse
Do you have adb access in recovery? If not, try to download a .IMG file for the latest twrp and flash that with fastboot and then try again to get adb in recovery.
crpalmer said:
Do you have adb access in recovery? If not, try to download a .IMG file for the latest twrp and flash that with fastboot and then try again to get adb in recovery.
Click to expand...
Click to collapse
I had the latest TWRP and it wasn't working. I then switched to CWM (via fastboot flash) and it still wouldn't recognize.
I previously had the ViperDNA rom installed and I think once everything was wiped (OS included), my computer no longer recognized my cellphone.
Is there any other way to recover my device / OS? Possibly only using fastboot?
bhinderoid said:
I had the latest TWRP and it wasn't working. I then switched to CWM (via fastboot flash) and it still wouldn't recognize.
I previously had the ViperDNA rom installed and I think once everything was wiped (OS included), my computer no longer recognized my cellphone.
Is there any other way to recover my device / OS? Possibly only using fastboot?
Click to expand...
Click to collapse
Do you have a USB otg cable and a thumb drive? That's another easy way to get a ROM into recovery. If not, the next easiest thing (other than going and buying one or finding someone that you can borrow one from) would be to find a guide to ruu back to stock (make sure you do not screw up locking the bootloader!) and then start over with rooting / unlocking.
crpalmer said:
Do you have a USB otg cable and a thumb drive? That's another easy way to get a ROM into recovery. If not, the next easiest thing (other than going and buying one or finding someone that you can borrow one from) would be to find a guide to ruu back to stock (make sure you do not screw up locking the bootloader!) and then start over with rooting / unlocking.
Click to expand...
Click to collapse
I do have a thumbdrive but not a USB otg cable (I can go buy one)
So if I'm accessing it through twrp, is there a particular folder which will allow me access to the thumb drive?
Also, would I be good simply flashing a Rom.zip and have everything re-installed?
Thanks so much for your replies, I really REALLY appreciate it!
Also, I don't think my phone is USB Debugging activated, if I need to activate it is there a way to do it if everything on my phone has been wiped and I have no immediate access to activating the option?
bhinderoid said:
I do have a thumbdrive but not a USB otg cable (I can go buy one)
So if I'm accessing it through twrp, is there a particular folder which will allow me access to the thumb drive?
Also, would I be good simply flashing a Rom.zip and have everything re-installed?
Thanks so much for your replies, I really REALLY appreciate it!
Also, I don't think my phone is USB Debugging activated, if I need to activate it is there a way to do it if everything on my phone has been wiped and I have no immediate access to activating the option?
Click to expand...
Click to collapse
No problem.
I don't use twrp but I would imagine it is fairly obvious how to select the usb-otg drive. If not, try cwr. I know that used to work and was fairly obvious (but I forget the exact details).
There isn't any way to enable USB debugging in recovery but flashing a working ROM should get you back in business.
crpalmer said:
No problem.
I don't use twrp but I would imagine it is fairly obvious how to select the usb-otg drive. If not, try cwr. I know that used to work and was fairly obvious (but I forget the exact details).
There isn't any way to enable USB debugging in recovery but flashing a working ROM should get you back in business.
Click to expand...
Click to collapse
So I don't need USB debugging activated in order to flash a rom from a USB otg drive, correct?
Thanks again bud, you've talked me off the ledge.
bhinderoid said:
So I don't need USB debugging activated in order to flash a rom from a USB otg drive, correct?
Thanks again bud, you've talked me off the ledge.
Click to expand...
Click to collapse
You shouldn't. Usb storage is just storage.
crpalmer said:
You shouldn't. Usb storage is just storage.
Click to expand...
Click to collapse
The USB OTG is a GODSEND.
As are you, crpalmer, thank you so much for all the help!!
bhinderoid, did you fix it? Another option is ADB sideload. I've been in the same position as you and it is awful.
here is another thread that mentions the steps and issues.
http://forum.xda-developers.com/showthread.php?p=46752829#post46752829

[RESOLVED] SAMSUNG J600GDXUACUH1 BOOTLOOP. NEED HELP

I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
MnTri said:
I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
Click to expand...
Click to collapse
You're using Windows?
ethical_haquer said:
You're using Windows?
Click to expand...
Click to collapse
Yep. Windows 10
MnTri said:
Yep. Windows 10
Click to expand...
Click to collapse
If you have access to a Linux computer let me know, otherwise, I will try and fix it with you on Windows.
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
MnTri said:
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
Click to expand...
Click to collapse
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
ACCIDENTAL
ethical_haquer said:
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
Click to expand...
Click to collapse
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
MnTri said:
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
Click to expand...
Click to collapse
MnTri said:
I can only go to the recovery mode
Click to expand...
Click to collapse
You still have a recovery, is it stock or custom?
Stock
ethical_haquer said:
You still have a recovery, is it stock or custom?
Click to expand...
Click to collapse
MnTri said:
Stock
Click to expand...
Click to collapse
But you still can't connect your phone to your computer?
UPDATING MY PHONE (27TH.3.2023)
So basically I bought the new cable to connect it to computer, and it seems to work now [I knew it because I heard the Windows connecting sound]. But it wouldn't show Samsung J6 folder on computer for now. And I'm in the situation that when I pressed wipe cache partition in the recovery mode it would show:
E:[PDP] lstat /c____/pdp_b__ : 0 - No PDP scenario​I haven't tried going to the safe mode, but with the fact that I'm still stuck at the recovery mode right now (or reboot again and get bootloop) and it seems no one has the answer to the No PDP scenario right now, I don't really know what to do next
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
MnTri said:
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
Click to expand...
Click to collapse
Nice! If this thread is done, put "[RESOLVED]" in the title. That way people will click on on it to get help, not help you.

Categories

Resources